Search

The aim of this study was to investigate the ability of peptides and peptide combinations to support circulating endothelial colony forming cell (ECFC) rolling and adhesion under shear flow, informing biomaterial design in moving toward rapid cardiovascular device endothelialization. ECFCs have high proliferative capability and can differentiate into endothelial cells, making them a promising cell source for endothelialization. Both single peptides and peptide combinations designed to target integrins α 4 β 1 and α 5 β 1 were coupled to poly(ethylene glycol) hydrogels, and their performance was evaluated by monitoring velocity patterns during the ECFC rolling process, in addition to firm adhesion (capture). Tether percentage and velocity fluctuation, a parameter newly defined here, were found to be valuable in assessing cell rolling velocity patterns and when used in combination were able to predict cell capture. REDV-containing peptides binding integrin α 4 β 1 have been previously shown to reduce ECFC rolling velocity but not to support firm adhesion. This study finds that the performance of REDV-containing peptides in facilitating ECFC dynamic adhesion and capture can be improved by combination with α 5 β 1 integrin-binding peptides, which support ECFC static adhesion. Moreover, when similar in length, the peptide combinations may have synergistic effects in capturing ECFCs. With matching lengths, the peptide combinations including CRRETAWAC(cyclic)+REDV, P_RGDS+KSSP_REDV, and P_RGDS+P_REDV showed high values in both tether percentage and velocity fluctuation and improvement in ECFC capture compared to the single peptides at the shear rate of 20 s–1. These newly identified peptide combinations have the potential to be used as vascular device coatings to recruit ECFCs. Restoration of functional endothelium following placement of stents and vascular grafts is critical for maintaining long-term patency. Endothelial colony forming cells (ECFCs) circulating in blood flow are a valuable cell source for rapid endothelialization. Here we identify and test novel peptides and peptide combinations that can potentially be used as coatings for vascular devices to support rolling and capture of ECFCs from flow. In addition to the widely used assessment of final ECFC adhesion, we also recorded the rolling process to quantitatively evaluate the interaction between ECFCs and the peptides, obtaining detailed performance of the peptides and gaining insight into effective capture molecule design. Peptide combinations targeting both integrin α 4 β 1 and integrin α 5 β 1 showed the highest percentages of ECFC capture. [Display omitted] [ABSTRACT FROM AUTHOR]

A scaffold that is inherently bioactive, osteoinductive and osteoconductive may guide mesenchymal stem cells (MSCs) to regenerate bone tissue in the absence of exogenous growth factors. Previously, we established that hydrogel scaffolds formed by crosslinking methacrylated star poly(dimethylsiloxane) (PDMS star -MA) with diacrylated poly(ethylene glycol) (PEG-DA) promote bone bonding by induction of hydroxyapatite formation ("bioactive") and promote MSC lineage progression toward osteoblast-like fate ("osteoinductive"). Herein, we have combined solvent induced phase separation (SIPS) with a fused salt template to create PDMS star -PEG hydrogel scaffolds with controlled PDMS star -MA distribution as well as interconnected macropores of a tunable size to allow for subsequent cell seeding and neotissue infiltration ("osteoconductive"). Scaffolds were prepared with PDMS star -MA of two number average molecular weights (M n s) (2k and 7k) with varying PDMS star -MA:PEG-DA ratios and template salt sizes. The distribution of PDMS star -MA within the hydrogels was examined as well as pore size, percent interconnectivity, dynamic and static moduli, hydration, degradation and in vitro bioactivity (i.e. mineralization when exposed to simulated body fluid, SBF). Finally, cell culture with seeded human bone marrow-derived MSCs (hBMSCs) was used to confirm non-cytotoxicity and characterize osteoinductivity. Tunable, interconnected macropores were achieved by utilization of a fused salt template of a specified salt size during fabrication. Distribution of PDMS star -MA within the PEG-DA matrix improved for the lower M n and contributed to differences in specific material properties (e.g. local modulus) and cellular response. However, all templated SIPS PDMS star -PEG hydrogels were confirmed to be bioactive, non-cytotoxic and displayed PDMS star -MA dose-dependent osteogenesis. A tissue engineering scaffold that can inherently guide mesenchymal stem cells (MSCs) to regenerate bone tissue without growth factors would be a more cost-effective and safe strategy for bone repair. Typically, glass/ceramic fillers are utilized to achieve this through their ability to induce hydroxyapatite formation ("bioactive") and promote MSC differentiation to an osteoblast-like fate ("osteoinductive"). Herein, we have fabricated an interconnected, macroporous PEG-DA hydrogel scaffold that utilizes PDMS star -MA as a bioactive and osteoinductive scaffold component. We were able to show that these PDMS star -PEG hydrogels maintain several key material characteristics for bone repair. Further, bioactivity and osteoinductivity were simultaneously achieved in human bone marrow-derived MSC culture, representing a notable achievement for an exclusively material-based strategy. [ABSTRACT FROM AUTHOR]

Graphical abstract Abstract There is a growing clinical need to address high failure rates of small diameter (<6 mm) synthetic vascular grafts. Although there is a strong empirical correlation between low patency rates and low compliance of synthetic grafts, the mechanism by which compliance mismatch leads to intimal hyperplasia is poorly understood. To elucidate this relationship, synthetic vascular grafts were fabricated that varied compliance independent of other graft variables. A computational model was then used to estimate changes in fluid flow and wall shear stress as a function of graft compliance. The effect of compliance on arterial remodeling in an ex vivo organ culture model was then examined to identify early markers of intimal hyperplasia. The computational model prediction of low wall shear stress of low compliance grafts and clinical control correlated well with alterations in arterial smooth muscle cell marker, extracellular matrix, and inflammatory marker staining patterns at the distal anastomoses. Conversely, high compliance grafts displayed minimal changes in fluid flow and arterial remodeling, similar to the sham control. Overall, this work supports the intrinsic link between compliance mismatch and intimal hyperplasia and highlights the utility of this ex vivo organ culture model for rapid screening of small diameter vascular grafts. Statement of Significance We present an ex vivo organ culture model as a means to screen vascular grafts for early markers of intimal hyperplasia, a leading cause of small diameter vascular graft failure. Furthermore, a computational model was used to predict the effect of graft compliance on wall shear stress and then correlate these values to changes in arterial remodeling in the organ culture model. Combined, the ex vivo bioreactor system and computational model provide insight into the mechanistic relationship between graft-arterial compliance mismatch and the onset of intimal hyperplasia. [ABSTRACT FROM AUTHOR]

Graphical abstract Abstract Numerous studies have demonstrated that the differentiation potential of human mesenchymal stem cells (hMSCs) can be modulated by chemical and physical cues. In 2D contexts, inducing different cell morphologies, by varying the shape, area and/or curvature of adhesive islands on patterned surfaces, has significant effects on hMSC multipotency and the onset of differentiation. In contrast, in vitro studies in 3D contexts have suggested that hMSC differentiation does not directly correlate with cell shape. However, in 3D, the effects of cell morphology on hMSC differentiation have not yet been clearly established due to the chemical and physical properties being intertwined in 3D matrices. In this work, we studied the effects of round or elongated cell morphologies on hMSC differentiation independently of scaffold composition, modulus, crosslink density and cell-mediated matrix remodeling. The effects of cell shape on hMSC lineage progression were studied using three different cell culture media compositions and two values of scaffold rigidity. Differences in cell shape were achieved using interpenetrating polymer networks (IPNs). The mechanical and diffusional properties of the scaffolds and cell-matrix interactions were characterized. In addition, cell responses were evaluated in terms of cell spreading via gene and protein expression of differentiation markers. Cumulative results support, and extend upon previous work indicating that cell shape alone in 3D contexts does not significantly modulate hMSC differentiation, at least for the scaffold chemistry, range of modulus and culture conditions explored in this study. Statement of Significance In 2D contexts, inducing different cell shapes, by varying the curvature, area size and shape of a patterned surface, has significant effects on hMSC multipotency and the onset of cell differentiation. In contrast, in vitro studies in 3D contexts have suggested that hMSC differentiation does not directly correlate with cell shape. However, in 3D, the effects of cell morphology on hMSC differentiation have not yet been clearly established due to the chemical and physical properties being intertwined in 3D matrices. In this work, we studied the effects of round or elongated cell morphologies on the differentiation of hMSCs independently of scaffold composition, modulus, crosslink density and cell mediated matrix remodeling. Cumulative results support, and extend upon previous work indicating that cell shape alone in 3D contexts does not significantly modulate hMSCs differentiation commitment. [ABSTRACT FROM AUTHOR]

Small-caliber vascular grafts used in coronary artery bypass procedures typically fail due to the development of intimal hyperplasia or thrombosis. Our laboratory has developed a multilayered vascular graft with an electrospun polyurethane outer layer with improved compliance matching and a hydrogel inner layer that is both thromboresistant and promotes endothelialization. Initial in vivo studies showed that hydrogel particulates were dislodged from the hydrogel layer of the grafts during suturing. To address this problem, we developed and characterized a new hydrogel formulation that resists damage during suturing. Introduction of sacrificial, hydrogen bonds to poly(ethylene glycol)-based hydrogels via co-polymerization with n -vinyl pyrrolidone (NVP) increased the fracture energy as determined by single edge notch testing. This enhanced defect tolerance resulted in a hydrogel layer that was resistant to suture-induced damage with no dislodged particles observed. Importantly, the incorporation of NVP did not affect the thromboresistance, bioactivity, or biostability of the hydrogel layer. In addition to eliminating complications due to hydrogel particle generation in our multilayer graft design, this defect tolerant hydrogel formulation has broad potential use in many cardiovascular and soft tissue applications. Statement of Significance Small-caliber vascular grafts used in coronary artery bypass procedures typically fail due to development of intimal hyperplasia or thrombosis. Our laboratory has developed a multilayered vascular graft with an electrospun polyurethane outer layer with improved compliance matching and a hydrogel inner layer that is both thromboresistant and promotes endothelialization. However, hydrogel particulates were dislodged from the hydrogel layer during suturing in vivo . This work describes a hydrogel formulation based on poly(ethylene glycol) that is resistant to suture-induced damage. The introduction of sacrificial, hydrogen bonds by co-polymerization with n -vinyl pyrrolidone (NVP) resulted in an increase fracture energy without affecting the thromboresistance, bioactivity, or biostability. This defect-tolerant hydrogel formulation and the methodology to assess hydrogel defect tolerance has broad potential use in cardiovascular and soft tissue applications. [ABSTRACT FROM AUTHOR]

While tissue engineering is a promising alternative for treating critical-sized cranio-maxillofacial bone defects, improvements in scaffold design are needed. In particular, scaffolds that can precisely match the irregular boundaries of bone defects as well as exhibit an interconnected pore morphology and bioactivity would enhance tissue regeneration. In this study, a shape memory polymer (SMP) scaffold was developed exhibiting an open porous structure and the capacity to conformally “self-fit” into irregular defects. The SMP scaffold was prepared via photocrosslinking of poly(ε-caprolactone) (PCL) diacrylate using a SCPL method, which included a fused salt template. A bioactive polydopamine coating was applied to coat the pore walls. Following exposure to warm saline at T > T trans ( T trans = T m of PCL), the scaffold became malleable and could be pressed into an irregular model defect. Cooling caused the scaffold to lock in its temporary shape within the defect. The polydopamine coating did not alter the physical properties of the scaffold. However, polydopamine-coated scaffolds exhibited superior bioactivity (i.e. formation of hydroxyapatite in vitro), osteoblast adhesion, proliferation, osteogenic gene expression and extracellular matrix deposition. [ABSTRACT FROM AUTHOR]

Abstract: Growth factors have been shown to be powerful mediators of mesenchymal stem cell (MSC) osteogenic differentiation. However, their use in tissue engineered scaffolds not only can be costly but also can induce undesired responses in surrounding tissues. Thus, the ability to specifically promote MSC osteogenic differentiation in the absence of exogenous growth factors via the manipulation of scaffold material properties would be beneficial. The current work examines the influence of select extracellular matrix (ECM) proteins on MSC osteogenesis toward the goal of developing scaffolds with intrinsically osteoinductive properties. Fibrinogen (FG), fibronectin (FN) and laminin-1 (LN) were chosen for evaluation due to their known roles in bone morphogenesis or bone fracture healing. These proteins were conjugated into poly(ethylene glycol) diacrylate (PEGDA) hydrogels and their effects on encapsulated 10T½ MSCs were evaluated. Specifically, following 1week of culture, mid-term markers of various MSC lineages were examined in order to assess the strength and specificity of the observed osteogenic responses. PEG–LN gels demonstrated increased levels of the osteogenic transcription factor osterix relative to day 0 levels. In addition, PEG–FG and PEG–LN gels were associated with increased deposition of bone ECM protein osteocalcin relative to PEG–FN gels and day 0. Importantly, the osteogenic response associated with FG and LN appeared to be specific in that markers for chondrocytic, smooth muscle cell and adipocytic lineages were not similarly elevated relative to day 0 in these gels. To gain insight into the integrin dynamics underlying the observed differentiation results, initial integrin adhesion and temporal alterations in cell integrin profiles were evaluated. The associated results suggest that α2, αv and α6 integrin subunits may play key roles in integrin-mediated osteogenesis. [Copyright &y& Elsevier]

Abstract: Inorganic–organic hydrogels based on methacrylated star polydimethylsiloxane (PDMSstar-MA) and diacrylated poly(ethylene glycol) (PEG-DA) macromers were prepared via solvent-induced phase separation (SIPS). The macromers were combined in a dichloromethane precursor solution and sequentially photopolymerized, dried and hydrated. The chemical and physical properties of the hydrogels were further tailored by varying the number average molecular weight (Mn) of PEG-DA (Mn =3.4k and 6k gmol−1) as well as the weight percent ratio of PDMSstar-MA (Mn =7k gmol−1) to PEG-DA from 0:100 to 20:80. Compared to analogous hydrogels fabricated from aqueous precursor solutions, SIPS produced hydrogels with a macroporous morphology, a more even distribution of PDMSstar-MA, increased modulus and enhanced degradation rates. The morphology, swelling ratio, mechanical properties, bioactivity, non-specific protein adhesion, controlled introduction of cell adhesion, and cytocompatibility of the hydrogels were characterized. As a result of their tunable properties, this library of hydrogels is useful to study material-guided cell behavior and ultimate tissue regeneration. [Copyright &y& Elsevier]

Abstract: Tissue engineering strategies based on multipotent stem cells (MSCs) hold significant promise for the repair or replacement of damaged smooth muscle tissue. To design scaffolds which specifically induce MSC smooth muscle lineage progression requires a deeper understanding of the relative influence of various microenvironmental signals on myogenesis. For instance, MSC myogenic differentiation has been shown to be promoted by increases in active RhoA and FAK, both of which can be induced via increased cell–substrate stress. Separate studies have demonstrated MSC myogenesis to be enhanced by uniaxial cell alignment. The goal of the present study was to compare the impact of increased peak cell–substrate stresses vs. increased uniaxial cell alignment on MSC myogenic differentiation. To this end, MSC fate decisions were compared within two distinct multicellular “forms”. A “stripe” multicellular pattern was designed to induce uniaxial cell alignment. In contrast, a second multicellular pattern was designed with “loops” or curves, which altered cell directionality while simultaneously generating regional peak stresses significantly above that intrinsic to the “stripe” form. As anticipated, the higher peak stress levels of the “loop” pattern were associated with increased fractions of active RhoA and active FAK. In contrast, two markers of early smooth muscle lineage progression, myocardin and SM-α-actin, were significantly elevated in the “stripe” pattern relative to the “loop” pattern. These results indicate that scaffolds which promote uniaxial MSC alignment may be more inductive of myogenic differentiation than those associated with increased peak, cell–substrate stress but in which cell directionality varies. [Copyright &y& Elsevier]

Abstract: Nickel–titanium (NiTi) shape memory alloys (SMAs) are commonly used in a range of biomedical applications. However, concerns exist regarding their use in certain biomedical scenarios due to the known toxicity of Ni and conflicting reports of NiTi corrosion resistance, particularly under dynamic loading. Titanium–niobium (TiNb) SMAs have recently been proposed as an alternative to NiTi SMAs due to the biocompatibility of both constituents, the ability of both Ti and Nb to form protective surface oxides, and their superior workability. However, several properties critical to the use of TiNb SMAs in biomedical applications have not been systematically explored in comparison with NiTi SMAs. These properties include cytocompatibility, corrosion resistance, and alterations in alloy surface composition in response to prolonged exposure to physiological solutions. Therefore, the goal of the present work was to comparatively investigate these aspects of NiTi (49.2at.% Ti) and TiNb (26at.% Nb) SMAs. The results from the current studies indicate that TiNb SMAs are less cytotoxic than NiTi SMAs, at least under static culture conditions. This increased TiNb cytocompatibility was correlated with reduced ion release as well as with increased corrosion resistance according to potentio-dynamic tests. Measurements of the surface composition of samples exposed to cell culture medium further supported the reduced ion release observed from TiNb relative to NiTi SMAs. Alloy composition depth profiles also suggested the formation of calcium phosphate deposits within the surface oxide layers of medium-exposed NiTi but not of TiNb. Collectively, the present results indicate that TiNb SMAs may be promising alternatives to NiTi for certain biomedical applications. [Copyright &y& Elsevier]

Abstract: Poly(ethylene glycol) (PEG) hydrogels have recently begun to be studied for the treatment of scarred vocal fold lamina propria due, in part, to their tunable mechanical properties, resistance to fibroblast-mediated contraction, and ability to be polymerized in situ. However, pure PEG gels lack intrinsic biochemical signals to guide cell behavior and generally fail to mimic the frequency-dependent viscoelastic response critical to normal superficial lamina propria function. Recent results suggest that incorporation of viscoelastic bioactive substances, such as glycosaminoglycans (GAGs), into PEG networks may allow these gels to more closely approach the mechanical responses of normal vocal fold lamina propria while also stimulating desired vocal fold fibroblast behaviors. Although a number of vocal fold studies have examined the influence of hyaluronan (HA) on implant mechanics and vocal fold fibroblast responses, the effects of other GAG types have been relatively unexplored. This is significant, since recent studies have suggested that chondroitin sulfate C (CSC) and heparan sulfate (HS) are substantially altered in scarred lamina propria. The present study was therefore designed to evaluate the effects of CSC and HS incorporation on the mechanical response of PEG gels and vocal fold fibroblast behavior relative to HA. As with PEG–HA, the viscoelasticity of PEG–CSC and PEG–HS gels more closely approached that of the normal vocal fold lamina propria than pure PEG hydrogels. In addition, collagen I deposition and fibronectin production were significantly higher in CSC than in HA gels, and levels of the myofibroblast marker smooth muscle α-actin (SM α-actin) were greater in CSC and HS gels than in HA gels. Since collagen I, fibronectin, and SM α-actin are generally elevated in scarred lamina propria these results suggest that CSC and HS may be undesirable for vocal fold implants relative to HA. Investigation of various signaling intermediates indicated that alterations in NFκB-p50, NFκB-p65, or pERK1/2 levels may underlie the observed differences among the PEG–GAG gels. [Copyright &y& Elsevier]

Abstract: The retention of lipoproteins in the arterial intima is an initial event in early atherosclerosis and occurs, in part, through interactions between negatively charged glycosaminoglycans (GAGs) and the positively charged residues of apolipoproteins. Smooth muscle cells (SMCs) which infiltrate into the lipoprotein-enriched intima have been observed to transform into lipid-laden foam cells. This phenotypic switch is associated with SMC acquisition of a macrophage-like capacity to phagocytose lipoproteins and/or of an adipocyte-like capacity to synthesize fatty acids de novo. The aim of the present work was to explore the impact of GAG identity on SMC foam cell formation using a scaffold environment intended to be mimetic of early atherosclerosis. In these studies, we focused on chondroitin sulfate C (CSC), dermatan sulfate (DS), and an intermediate molecular weight hyaluronan (HAIMW, ∼400kDa), the levels and/or distribution of each of which are significantly altered in atherosclerosis. DS hydrogels were associated with greater SMC phagocytosis of apolipoprotein B than HAIMW gels. Similarly, only SMCs in DS constructs maintained increased expression of the adipocyte marker A-FABP relative to HAIMW gels over 35days of culture. The increased SMC foam cell phenotype in DS hydrogels was reflected in a corresponding decrease in SMC myosin heavy chain expression in these constructs relative to HAIMW gels at day 35. In addition, this DS-associated increase in foam cell formation was mirrored in an increased SMC synthetic phenotype, as evidenced by greater levels of collagen type I and glucose 6-phosphate dehydrogenase in DS gels than in HAIMW gels. Combined, these results support the increasing body of literature that suggests a critical role for DS-bearing proteoglycans in early atherosclerosis. [Copyright &y& Elsevier]

Abstract: Current clinical management of vocal fold (VF) scarring produces inconsistent and often suboptimal results. Researchers are investigating a number of alternative treatments for VF lamina propria (LP) scarring, including designer implant materials for functional LP regeneration. In the present study, we investigate the effects of the initial scaffold elastic modulus and mesh size on encapsulated VF fibroblast (VFF) extracellular matrix (ECM) production toward rational scaffold design. Poly(ethylene glycol) diacrylate (PEGDA) hydrogels were selected for this study since their material properties, including mechanical properties, mesh size, degradation rate and bioactivity, can be tightly controlled and systematically modified. Porcine VFF were encapsulated in four PEGDA hydrogels with degradation half lives of ∼25 days, but with initial elastic compressive moduli and mesh sizes ranging from ∼30 to 100kPa and from ∼9 to 27nm, respectively. After 30 days of static culture, VFF ECM production and phenotype in each formulation was assessed biochemically and histologically. Sulfated glycosaminoglycan synthesis increased in similar degree with both increasing initial modulus and decreasing initial mesh size. In contrast, elastin production decreased with increasing initial modulus but increased with decreasing initial mesh size. Both collagen deposition and the induction of a myofibroblastic phenotype depended strongly on initial mesh size but appeared largely unaffected by variations in initial modulus. The present results indicate that scaffold mesh size warrants further investigation as a critical regulator of VFF ECM synthesis. Furthermore, this study validates a systematic and controlled approach for analyzing VFF response to scaffold properties, which should aid in rational scaffold selection/design. [Copyright &y& Elsevier]

Abstract: A simple, inexpensive photolithographic method for surface patterning deformable, solvated substrates is demonstrated using photoactive poly(ethylene glycol) (PEG)-diacrylate hydrogels as model substrates. Photolithographic masks were prepared by printing the desired patterns onto transparencies using a laser jet printer. Precursor solutions containing monoacryloyl-PEG-peptide and photoinitiator were layered onto hydrogel surfaces. The acrylated moieties in the precursor solution were then conjugated in monolayers to specific hydrogel regions by exposure to UV light through the transparency mask. The effects of UV irradiation time and precursor solution concentration on the levels of immobilized peptide were characterized, demonstrating that bound peptide concentration can be controlled by tuning these parameters. Multiple peptides can be immobilized to a single hydrogel surface in distinct patterns by sequential application of this technique, opening up its potential use in co-cultures. In addition, 3D structures can be generated by incorporating PEG-diacrylate into the precursor solution. To evaluate the feasibility of using these patterned surfaces for guiding cell behavior, human dermal fibroblast adhesion on hydrogel surfaces patterned with acryloyl–PEG–RGDS was investigated. This patterning method may find use in tissue engineering, the elucidation of fundamental structure–function relationships, and the formation of immobilized cell and protein arrays for biotechnology. [Copyright &y& Elsevier]

Abstract: Chronic voice impairment due to scarring of the vocal fold (VF) lamina propria (LP) can be debilitating in terms of quality of life. Due to the dependence of normal VF vibration on proper VF geometry, an implant inserted to restore appropriate shape and pliability to scarred LP should ideally maintain its insertion-dimensions while being replaced by newly synthesized extracellular matrix (ECM). In the present study, collagen–alginate and collagen–hyaluronan (HA) composite hydrogels were investigated for their ability to support ECM synthesis by VF fibroblasts with limited hydrogel compaction and/or resorption. Collagen–HA composites showed significant mass loss over 28 days of culture, with little evidence of new matrix production. Collagen–alginate composites, in contrast, resisted scaffold compaction and mass loss for at least 42 days in culture while allowing for ECM synthesis. Collagen–alginate hydrogels appear to be promising materials for VF restoration, warranting further investigation. [Copyright &y& Elsevier]

"Self-fitting" shape memory polymer (SMP) scaffolds based on poly(ε-caprolactone) diacrylate (PCL-DA) have the potential to improve healing of irregular bone defects due to their capacity to fill complex geometries and to intrinsically support human mesenchymal stem cell (h-MSC) mediated osteogenesis. In prior work, the incorporation of polydimethylsiloxane dimethacrylate (PDMS-DMA) resulted in PCL/PDMS SMP scaffolds that successfully induced in vitro mineralization and accelerated degradation, the latter stemming from phase separation effects. Herein, analogous scaffolds were created with a more hydrophilic polysiloxane, polymethylhydrosiloxane dimethacrylate (PMHS-DMA). When compared to analogous PCL/PDMS scaffolds, the resulting PCL/PMHS scaffolds exhibited desirably faster rates of in vitro degradation and mineralization. In vitro analyses on RGDS [Arg-Gly-Asp-Ser]-modified PCL/PMHS confirmed their capacity to intrinsically support h-MSC bone marker expression with similar specificity and potency as RGDS-containing PCL scaffolds. However, cellular spreading was reduced on RGDS-modified PCL/PMHS scaffolds versus PCL and analogous PCL/PDMS scaffolds due to a decrease in surface-available cell adhesive peptide. [Display omitted] • PMHS is more hydrophilic compared to PDMS (stemming from Si–H moieties). • PCL/PMHS scaffolds degraded faster than corresponding PCL/PDMS scaffolds. • PCL/PMHS scaffolds mineralized after 2 weeks exposure to SBF (1×), while more hydrophobic PDMS mineralized after 4 weeks. • Post-mineralization, all scaffold moduli were significantly similar or higher versus the PCL scaffold. [ABSTRACT FROM AUTHOR]

Reticulated vitreous carbon (RVC) foams are of interest in orthopedic applications due to their porous, honeycomb-like structure, biocompatibility, and bio-inert nature. Despite these desirable properties, RVC foams lack the strength necessary for orthopedic applications. Specifically, orthopedic biomaterials, whether bone scaffolds, plates or screws, must be able to withstand normal bone tissue loading at the time of implantation. This manuscript focuses on developing a composite RVC foam infiltrated with a hydroxyapatite (HA)-reinforced poly( d , l -lactide-co-glycolide) (PLGA) polymer. The HA/PLGA filler is envisioned to increase initial RVC foam mechanical stability while enabling osteoblasts to invade and deposit new tissue within the foam as the filler resorbs, providing long-term strength and osseointegration. Herein, a facile processing technique is developed which results in HA/PLGA-infused RVC foams with good internal interfacial bonding and increased modulus and strength relative to pure RVC foams. As anticipated, in vitro hydrolytic degradation studies indicate that the porous network of the RVC foam becomes progressively more accessible as the PLGA filler degrades and that the RVC foam may support improved structural integrity of the resorbing filler. Initial cell studies also demonstrate that this material system allows for robust osteoblast adhesion. These results indicate the proposed composites warrant further investigation for orthopedic applications. [ABSTRACT FROM AUTHOR]

Poly(ethylene glycol) diacrylate (PEGDA) hydrogels are widely used in biotechnology due to their in situ crosslinking capacity and tunable physical properties. However, as with all single component hydrogels, the modulus of PEGDA networks cannot be tailored independently of mesh size. This interdependence places significant limitations on their use for defined, 3D cell-microenvironment studies and for certain controlled release applications. The incorporation of secondary reactive species (SRS) into PEGDA hydrogels has previously been shown to allow the identification of up to 6 PEGDA hydrogel formulations for which distinct moduli can be obtained at consistent average mesh size (or vice versa). However, the modulus and mesh size ranges which can be probed by these formulations are quite restricted. This work presents an in-depth study of SRS incorporation into PEGDA hydrogels, with the goal of expanding the space for which “decoupled” examination of modulus and mesh size effects is achievable. Towards this end, over 100 PEGDA hydrogels containing either N-vinyl pyrrolidone or star PEG-tetraacrylate as SRS were characterized. To our knowledge, this is the first study to demonstrate that SRS incorporation allows for the identification of a number of modulus ranges that can be probed at consistent average mesh size (or vice versa). [ABSTRACT FROM AUTHOR]

Collagen hydrogels have been widely investigated as scaffolds for vascular tissue engineering due in part to the capacity of collagen to promote robust cell adhesion and elongation. However, collagen hydrogels display relatively low stiffness and strength, are thrombogenic, and are highly susceptible to cell-mediated contraction. In the current work, we develop and characterize a sequentially-formed interpenetrating network (IPN) that retains the benefits of collagen, but which displays enhanced mechanical stiffness and strength, improved thromboresistance, high physical stability and resistance to contraction. In this strategy, we first form a collagen hydrogel, infuse this hydrogel with poly(ethylene glycol) diacrylate (PEGDA), and subsequently crosslink the PEGDA by exposure to longwave UV light. These collagen-PEGDA IPNs allow for cell encapsulation during the fabrication process with greater than 90% cell viability via inclusion of cells within the collagen hydrogel precursor solution. Furthermore, the degree of cell spreading within the IPNs can be tuned from rounded to fully elongated by varying the time delay between the formation of the cell-laden collagen hydrogel and the formation of the PEGDA network. We also demonstrate that these collagen-PEGDA IPNs are able to support the initial stages of smooth muscle cell lineage progression by elongated human mesenchymal stems cells. [ABSTRACT FROM AUTHOR]

Highlights: [•] NIH/3T3 cells were exposed to individualized and agglomerated ZnO nanoparticles. [•] The cytotoxic response in growth media with and without phosphates was assessed. [•] With phosphates present, zinc phosphate formation enhanced cell death. [•] Agglomeration-dependent cell death only existed in the presence of phosphates. [•] Nanomaterial interactions with growth media constituents can be easily overlooked. [Copyright &y& Elsevier]

Abstract: Poly(N-isopropylacrylamide) (PNIPAAm) hydrogels become more hydrophobic when they reversibly switch from a water-swollen to a deswollen state above the volume phase transition temperature (VPTT, ∼33°C) which has been used to modulate cell adhesion. In the current work, we prepared novel thermoresponsive nanocomposite hydrogels comprised of a PNIPAAm hydrogel matrix and polysiloxane colloidal nanoparticles (∼220nm average diameter) via in situ photopolymerization of aqueous solutions of NIPAAm monomer, N,N′-methylenebisacrylamide (BIS, crosslinker), photoinitiator and polysiloxane nanoparticles (0.5–2.0 wt% based on solution weight) at ∼7°C. The VPTT of the nanocomposite hydrogels is not altered versus the pure PNIPAAm hydrogel. Dynamic mechanical analysis and tensile tests revealed that higher nanoparticle content generally produced improved hydrogel mechanical properties. Surfaces of nanocomposite hydrogels became increasingly more hydrophobic at all temperatures between 10 and 40°C as the amount of hydrophobic polysiloxane nanoparticles was increased. When cooled from 37 to 25°C, mouse smooth muscle precursor cells (10T1/2) were effectively detached from nanocomposite hydrogel surfaces. The utility of photopatterning to create surface micropillars comprised of nanocomposite hydrogels was demonstrated. [Copyright &y& Elsevier]