Search

Abstract: Microwave irradiation has been an interesting alternative for heating systems and several chemical reactions. In polymerization processes, microwaves can enhance reaction rates or improve specific characteristics of the formed polymer. In this work, the use of microwave irradiation in emulsion polymerization reactions has been studied, using a commercial microwave reactor, which is able to perform syntheses under controlled conditions of temperature and power. Methyl methacrylate emulsion polymerization reactions were faster, resulting in smaller polymer particles, in comparison to the conventional heating method (reactions in a jacketed reactor). Different effects were observed in the emulsion polymerization of butyl acrylate. To study the effect of high power microwave irradiation upon the emulsion polymerization, a pulsed irradiation strategy was developed, in which the samples were repeatedly heated within short intervals of time (about 27 s) at the maximum microwave power. A significant reduction of the total time of irradiation was observed in reactions carried out under the pulsed scheme, showing the kinetic advantages of using microwaves in emulsion polymerization processes. [Copyright &y& Elsevier]

Abstract: The bacterial composition of a lab-scale biotrickling filter (BTF) treating high loads of H2S was investigated by the rRNA approach. Two 16S rRNA gene clone libraries were established 42 and 189 d after reactor startup, while fluorescent in-situ hybridization (FISH) with DNA probes was performed throughout 260d of reactor operation. Diversity, community structure and metamorphosis were studied from reactor startup to fully-established pseudo-steady state operation at near neutral pH and at an inlet H2S concentration of 2000 ppmv (load of 55.6g H2S m−3 h−1). In addition, FISH was used for assessing the spatial distribution of sulfur-oxidizing bacteria (SOB) along the length of the reactor under pseudo-steady state operation. A major shift in the diversity of the community was observed with the operating time, from a well-diverse community at startup to pseudo-steady state operation with a majority of retrieved sequences affiliated to SOB of the sulfur cycle including Thiothrix spp., Thiobacillus spp., and Sulfurimonas denitrificans. Although aerobic species were predominant along the BTF, a vertical stratification was encountered, in which facultative anaerobes had a major relative abundance in the inlet part of the BTF, where the sulfide to oxygen ratio was higher. The observed changes were related to the trophic properties of the community, the DO concentration, the accumulation of elemental sulfur and the operation at neutral pH. [Copyright &y& Elsevier]

Abstract: Microwave irradiation has been a promising alternative to conduct several chemical reactions. In this work the microwave effects in potassium persulfate decomposition rate, under controlled conditions of temperature and microwave power, were evaluated. Higher decomposition rate constants were obtained in microwave irradiated reactions in comparison with conventional heated ones. To study the effect of high power microwave irradiation, a pulsed irradiation strategy was developed, in which the samples were repeatedly heated within short intervals of time at high power levels (500 or 1400W). A great decomposition percentage was achieved in shorter irradiation times, showing the kinetic advantages of microwave-assisted reactions. However, it was found no differences in the reaction yields, even when high power levels were involved, proving that microwave enhancements may arise only from the ability to quickly provide a large amount of energy to the reaction medium. [Copyright &y& Elsevier]