Search

In this article, we report a method to damp microfluidic hydrodynamic fluctuations caused by flow sources. We demonstrate that compliance of elastomeric off-chip tubings can be used to damp fluctuations and lead to steady flow rates. We analyze the whole microfluidic system using electrical circuit analogies, and demonstrate that off-chip compliances are significant, especially for displacement pump driven systems. We apply this hydrodynamic damping method to microfluidic droplet generation. Our results show that highly monodisperse microdroplets can be obtained by syringe pump driven systems utilizing this damping effect. We reached a coefficient of variation of 0.39% for the microdroplet area using a standard T-junction geometry. Additionally, we demonstrated that pressure pumps inherently use this effect, and have so far led the high performances reported in the literature in terms of droplet monodispersity. The presented off-chip hydrodynamic damping method is not only low-cost and practical, but can also be used in elastomeric and rigid microchannels without need to introduce additional components to the fluidic circuit. [ABSTRACT FROM AUTHOR]

• Revealed the root cause for droplet volume variation in fluidic systems. • Presented a universal novel method to achieve ultra-high monodispersity of droplets. • The novel method implemented for the most common droplet generators and flow sources. • Easily applicable method with no additional cost for existing droplet systems. Despite the importance of droplet monodispersity, a universal methodology for high monodispersity droplet generation does not exist yet. We have recently demonstrated that unlike the conventional method of droplet generation, applying an identical pressure from a single source makes the microfluidic droplet system immune to the external fluctuations that originate from the imperfection of the flow source. In this work, we show that our method is universal and applicable to other common microfluidic devices and flow sources. We applied this method to flow-focusing and coflow devices that are commonly used for high-frequency microdroplet generation. In addition to the pressure pump, we used a syringe pump to show that our method is applicable to flow rate controllable systems as well. We compared the monodispersity of droplets formed by the conventional methods and the novel method explained in this work. [ABSTRACT FROM AUTHOR]

[Display omitted] • New forms of particle behaviour were presented for colloidal solutions in microchannels. • The novel patterns are hypothesized to be due to nonuniformity of electric double layer and particle rotation due to shear flow. • The observations were done using Newtonian aqueous solutions and are applicable to a wide range of solutions. • These results challenge the Saffman-like slip velocity induced lift mechanisms used to explain the cross-stream particle migration. The lateral migration of colloidal particles inside a microfluidic channel has gained attention due to being both fundamentally intriguing and applicable for particle separation, such as cancer cell isolation or extracellular vesicle purification. Applying an external electric field combined with a pressure-driven flow induces such lateral migrations. In this study, new modes of lateral particle migration have been found by experimentally investigating 6 µm particles in the co-presence of electric field and pressure-driven flow. The experiments revealed the importance of the relative strengths of electric field and pressure gradient in determining particle lateral positioning. We hypothesize that the nonuniformity of the polarization caused by the external electric field and the rotation of the particle due to the background pressure-driven flow result in these modes of transverse migration. These new migration patterns are further utilized to perform microparticle separation and, more importantly, present a novel separation modality. [ABSTRACT FROM AUTHOR]

The isolation of extracellular vesicles (EVs) from milk, a complex mixture of colloidal structures having a comparable size to EVs, is challenging. Although ultracentrifugation (UC) has been widely used for EV isolation, this has significant limitations, including a long processing time at high g-force conditions and large sample volume requirements. We introduced a new approach based on nature nanoentities cellulose nanofibers (CNFs) and short time and low g-force centrifugation to isolate EVs from various milk fractions. The flexible and entangled network of CNFs forms nanoporous, which entraps the EVs. Further, positively charged CNFs interact with anionic EVs through an electrostatic attraction, promoting their isolation with efficiency comparable with UC. The functionality and toxicity of isolated milk EVs were tested in Caco2 cells. Overall, the newly developed approach provides straightforward isolation and biocompatibility and preserves the natural properties of the isolated EVs, enabling further applications. [Display omitted] [ABSTRACT FROM AUTHOR]

• Investigated the underlying reasons for droplet volume variation in fluidic systems. • Presented 4 design recommendations to improve monodisperse droplet generation. • Presented practical limit of achieving absolute droplet monodispersity, i.e. 0% CV. • Achieved ultra-high droplet monodispersity, less than 0.2% CV in droplet size. • Fluidic evaluation chip design to test parameters under same experimental conditions. Droplet microfluidic systems are becoming routine in advanced biochemical studies such as single cell gene expression, immuno profiling, precise nucleic acid quantification (dPCR) and particle synthesis. For all these applications, ensuring droplet monodispersity is critical to minimize the uncertainty due to droplet volume variation. Despite the wide usage of droplet-based microfluidic systems, the limit of monodispersity for droplet generation systems is still unknown. Here, we present an analytical approach that takes into account all the system dynamics and internal/external factors that disturb monodispersity. Interestingly, we are able to model the dynamics of a segmented two-phase flow system using a single-phase flow analogy, electron flow, in electrical circuits. We offer a unique solution and design guidelines to ensure ultra-monodisperse droplet generation. Our analytical conclusions are experimentally verified using a T-junction droplet generator. Equally importantly, we show the limiting experimental factors for reaching the theoretical maximum of monodispersity. [ABSTRACT FROM AUTHOR]