Search

Pyrolysis affords the conversion of plastics from Waste of Electrical and Electronic Equipment (WEEE) into oils with potential applications in the production of valuable chemicals and the formulation of liquid fuels. However, the presence of significant concentrations of halogens (Cl and Br) in these wastes represents an important limitation as it can lead to the generation of hazardous species that negatively affect the environment. In this work, the catalytic pyrolysis of a real WEEE plastic has been investigated using a reaction system that operates with continuous feeding of the raw material. The catalysts assayed include bulk metal oxides (Fe 2 O 3 and CaO) and zeolites (ZSM-5 and USY), as well as hybrid solids obtained by supporting those metal oxides on the zeolites. Pre-treatment of the raw WEEE plastics by water washing allows the Cl concentration to be significantly reduced, but it does not affect the Br content. Thermal pyrolysis produces an oil fraction with a high yield (> 70 wt%) and a large concentration of halogens (700 ppm), even though the char produced effectively retains more than 90% of Br and Cl contained in the feedstock. During catalytic pyrolysis, the halogen content of the oil is further reduced obtaining the best dehalogenation results with the metal-modified zeolites. This fact evidences a synergetic effect derived from the high metal dispersion achieved over the zeolitic supports. Fe/ZSM-5 is the most promising catalyst, showing an almost constant dehalogenation activity along the time-on-stream and producing an oil enriched in monoaromatic hydrocarbons (mainly styrene). [Display omitted] • WEEE plastics valorised by catalytic pyrolysis over metal-modified zeolites. • Water washing of the waste reduces 32% its Cl concentration but does not affect Br. • Char is an effective in situ halogens trap ensuring their safe disposal. • Fe and Ca-modified zeolites produce upgraded and highly dehalogenated oils. • Fe/ZSM-5 exhibits a stable dehalogenation activity along the time-on-stream. [ABSTRACT FROM AUTHOR]

The aim of this study is to improve the characterization and modeling of the radiation field surrounding the Leksell Gamma Knife®-PerfexionTM. The improved characterization of the radiation field enables more accurate shielding calculations to be performed for the areas adjacent to the treatment room. With the aid of a high-purity germanium detector and a satellite dose rate meter, γ -ray spectra and ambient dose equivalent H*(10) data were acquired at various locations in the field of a Leksell Gamma Knife unit in a treatment room at Karolinska University Hospital, Sweden. These measurements were used to validate the results of the PEGASOS Monte Carlo simulation system with a PENELOPE kernel. The levels of the radiation that passes through the shielding of the machine (leakage radiation) are shown to be much lower than what is suggested by various bodies, e.g. the National Council on Radiation Protection and Measurements, to be used when calculating radiation shielding barriers. The results clearly indicate that Monte Carlo simulations may be used in structural shielding design calculations for γ rays from the Leksell Gamma Knife. • A HPGe detector has been used to study the radiation field around the Gamma Knife; • A phase space has been used to study the radiation in the field of the Gamma Knife; • A novel pile-up modeling has been used to compare MC simulations with measurements. [ABSTRACT FROM AUTHOR]