Search

In the last few years there has been a growing interest in the use of bio-based and biodegradable plastics, made of renewable resources. A common biodegradable polymer, microbial-derived, is Poly-3-hydroxybutiric acid (PHB). However, PHB homopolymer exhibits a high crystalline structure, which leads to mechanical properties that are not fully compatible with a number of production processes. An interesting approach is blending PHB with other compounds in order to improve its physical properties and reducing the production costs of the finished products. The olive mill wastewater (OMW) is an organic-rich residual that arises from the production and refinery of olive oil, mainly composed by aromatic and aliphatic compounds, proteins, sugars and lipids. In addition, some of these compounds exhibit a higher biotoxicity, which makes OMW not suitable for those applications in which biodegradability is required. Nevertheless, OMW is an inexpensive and abundant source of fine chemicals such as polyphenols, leading, after their extraction, to OMW matrix residuals (OMWR) rich in lignin-cellulose. In this work, OMWR was used as a natural filler for the production of PHB based films. PHB/OMWR composite samples were characterized by chemical, thermal, morphological and mechanical analyses. Furthermore, the degradation profiles, in different environments, were evaluated with the aim to develop materials suitable for agriculture and food packaging applications. [ABSTRACT FROM AUTHOR]

Edible electronics will enable systems that can be safely ingested and degraded in the human body after completing their function, such as sensing physiological parameters or biological markers in the gastrointestinal tract, without risk of retention or need of recollection. The same systems are potentially suitable for directly tagging food, monitoring its quality, and developing edible soft actuators control and sensing abilities. Designing appropriate edible power sources is critical to turn such a vision into real opportunities. We propose electrically conductive edible composites based on ethylcellulose and activated carbon as enabling materials for energy harvesting and storage. Free-standing, phase-separated bi-layered films, insulating at the top and with low electrical resistivity (∼10 Ω cm) at the bottom, were produced with a scalable single-step process. Food additives can tune the mechanical and triboelectrical properties of the proposed edible films. We demonstrated their successful operation as electropositive elements in organic triboelectric nanogenerators (TENGs) and as electrodes in fully edible supercapacitors (SC). The TENGs showed ∼60 V peak voltage (root mean square power density ∼2.5 μW cm−2 at 5 Hz), while the SC achieved an energy density of 3.36 mW h g−1, capacity of ∼ 9 mAh g−1, and stability for more than 1000 charge-discharge cycles. These results show that the combination of ethyl cellulose and activated carbon, and the control over their mixture, allow on-demand edible devices for energy generation and storage, serving future edible and green electronics scenarios. [Display omitted] • Green and sustainable process for Edible Electronics. • Edible energy generator and storage device. • Triboelectric Nanogenerators and Supercapacitors based on Cellulose and Activated Carbon. • Edible conductive composite. [ABSTRACT FROM AUTHOR]

Bioactive food-preserving materials are based on the use of a natural antimicrobial compound loaded in a carrier material, which is able to trigger its release when requested and to modulate the rate of release, thus using either toxic or inhibitory properties against pathogens or bacteria due to food decomposition. In this study, the Schiff base formation for chitosan functionalization was achieved by the reaction of chitosan with cinnamaldehyde at different concentrations. Cinnamaldehyde is an aromatic α,β-unsaturated aldehyde, and the major component in essential oils from some cinnamon species. It has been shown to exert antimicrobial action against a large number of microorganisms including bacteria, yeasts, and mould. The formation of the Schiff base is reversible under suitable conditions, and this might allow the release of the active cinnamaldehyde from chitosan, used as the carrier. The reaction kinetics was investigated by means of rheological measurements, while infrared spectroscopy was used to assess the efficacy of the functionalization. The addition of nanometric graphene stacks to the cinnamaldehyde-functionalized chitosan films was evaluated with the aim to increase the mechanical properties of the film. Finally, the films were tested for antifungal properties with bread slices against a selected mould line. [ABSTRACT FROM AUTHOR]

Rationale and Objectives: The aim of this study was to identify the optimal parameter configuration of a new algorithm for fully automatic segmentation of hepatic vessels, evaluating its accuracy in view of its use in a computer system for three-dimensional (3D) planning of liver surgery. Materials and Methods: A phantom reproduction of a human liver with vessels up to the fourth subsegment order, corresponding to a minimum diameter of 0.2 mm, was realized through stereolithography, exploiting a 3D model derived from a real human computed tomographic data set. Algorithm parameter configuration was experimentally optimized, and the maximum achievable segmentation accuracy was quantified for both single two-dimensional slices and 3D reconstruction of the vessel network, through an analytic comparison of the automatic segmentation performed on contrast-enhanced computed tomographic phantom images with actual model features. Results: The optimal algorithm configuration resulted in a vessel detection sensitivity of 100% for vessels > 1 mm in diameter, 50% in the range 0.5 to 1 mm, and 14% in the range 0.2 to 0.5 mm. An average area overlap of 94.9% was obtained between automatically and manually segmented vessel sections, with an average difference of 0.06 mm(2). The average values of corresponding false-positive and false-negative ratios were 7.7% and 2.3%, respectively. Conclusions: A robust and accurate algorithm for automatic extraction of the hepatic vessel tree from contrast-enhanced computed tomographic volume images was proposed and experimentally assessed on a liver model, showing unprecedented sensitivity in vessel delineation. This automatic segmentation algorithm is promising for supporting liver surgery planning and for guiding intraoperative resections. [ABSTRACT FROM AUTHOR]

Abstract Focused on biomedical applications of thermo-responsive polymers, low-doses of gamma radiation from a 60Co source were applied in a simple one-pot method to synthesize graft copolymers of alginate and poly(N-isopropylacrylamide) (PNIPAAm) with different compositions. The molar percentage of grafted NIPAAm (% molar NIPAAm) was determined by thermogravimetric analysis (TGA) and elemental analysis (EA), being the copolymer structure-property relationship studied in terms of thermo-associative and rheological behavior in aqueous solutions. The addition of more NIPAAm monomer in the initial mixture of reaction, as well as, increasing absorbed dose lead to a greater grafting. However, increasing radiation dose produces copolymers with diminished viscoelastic properties caused by the alginate backbone scission. From rheological curves, two transition temperatures, Ta and Tgel, were determined as a consequence of the thermo-responsiveness of PNIPAAm side chain. Storage (G′) and loss (G″) modulus curves undergo a slope inversion at Ta temperature, where both moduli begin to increase caused by an associative behavior of PNIPAAm domains. While, Tgel temperature is related to the onset of the gelation process at the G′/G″ crossover. In order to design samples with liquid-gel transitions close to the human body, able to form gels in situ once inoculated, it was possible to tailor both transition temperatures selecting copolymers with an appropriate PNIPAAm content and optimizing the copolymer concentration in the aqueous solution. A good agreement between transition temperatures and viscoelastic properties was achieved for 5 wt% aqueous solutions of copolymers with low NIPAAm content synthesized at the lowest absorbed dose (0.5 kGy). Highlights • Low doses of γ radiation allow to synthesize alginate-g-PNIPAAm copolymers. • Structure-properties relationship was well defined by rheology in aqueous solution. • Copolymers sol–gel transitions could be tailored close to body temperature. • We obtained injectable solutions to form gels in situ once inoculated. [ABSTRACT FROM AUTHOR]

In this work, a novel composite sorbent material for water remediation from oily contaminants, based on a cellulose three-dimensional fibrous scaffold treated with stearic acid and expanded graphite flakes, is presented. The pristine cellulose foams are inherently omniphilic, absorbing indiscriminately both water and oils. However, after being modified with stearic acid and graphite via drop casting, they become superhydrophobic (still preserving their superoleophilic characteristics). As a result, the foams start exhibiting a highly selective behaviour which permits to absorb different kinds of oils and organic solvents, while repelling water completely. Thermal and chemical characterizations reveal that the modification treatment is successfully performed, while the performed mechanical tests demonstrate a good recovery of elasticity after repeated deformations and confirm that the elasticity of the foam is preserved after the treatment. Although based on natural materials, the fabricated foams exhibit oil absorption rate, saturation time and capacity values comparable to those of some synthetic materials with the same aim, exhibiting a very important added value, as it is based on low cost, green and biodegradable materials, requiring, at the same time, low processing costs and providing excellent reusability properties. [ABSTRACT FROM AUTHOR]