Search

Abstract The performance of the solar air collector is experimentally investigated at the climate of North Eastern India. Various governing parameters considered for the present investigation are collector tilt angles (30⁰, 45⁰, and 60°), single and double glazing, mass flow rate (0.0039–0.0118 kg/s) and two different absorber plates (plain and corrugated). Results reveal that double glazing absorber plate always gives better performance both energy and exergy point of view, because of reduction of top loses. Increase in mass flow rate of air enhances the energy efficiency. An overall increment of the efficiency with the increase of mass flow rate and number of glazing is as high as 10.35–17.42%. Use of corrugated plate enhances the energy efficiency by 14%, because of improved turbulence effect and increment of the heat transfer area. The maximum enhancement of exergy efficiency for double glazing collector is 6.867% for mass flow rate 0.0118 kg/s compared to single glazing collector. Corrugated absorber plate show 30Pa higher pressure drop than plain absorber plate. Thermo-hydraulic efficiency is found to deviate by almost 6.35% from the corresponding thermal efficiency. Mass flow rate of air in the range of 0.0078–0.0094 kg/s is found to yield qualitative heat transfer. Highlights • Comparison of flat and corrugated plate solar air collector is presented. • Double glazing reduces losses and increase the thermal efficiency by 6.87%. • Increase in mass flow rate by 3 times results in 6%increase of efficiency. • Corrugated plate provides 14% higher efficiency than flat plate collector. • Mass flow rate of air enhances energy efficiency and reduce exergetic efficiency. [ABSTRACT FROM AUTHOR]

Abstract: Two Gram (+) bacterial strains, BSB6 and BSB12, showing resistance and potential for Se(IV) reduction among 26 moderately halotolerant isolates from the Bhitarkanika mangrove soil were characterized by biochemical and 16S rDNA sequence analyses. Both of them were strictly aerobic and able to grow in a wide range of pH (4–11), temperature (4–40°C) and salt concentration (4–12%) having an optimum growth at 37°C, pH ∼7.5 and 7% salt (NaCl). The biochemical characteristics and 16S rDNA sequence analysis of BSB6 and BSB12 showed the closest phylogenetic similarity with the species Bacillus megaterium. Both the strains effectively reduced Se(IV) and complete reduction of selenite (up to 0.25mM) was achieved within 40h. SEM with energy dispersive X-ray and TEM analyses revealed the formation of nano size spherical selenium particles in and around the bacterial cells which were also supported by the confocal micrograph study. The UV–Vis diffuse reflectance spectra and XRD of selenium precipitates revealed that the selenium particles are in the nanometric range and crystalline in nature. These bacterial strains may be exploited further for bioremediation process of Se(IV) at relatively high salt concentrations and green synthesis of selenium nanoparticles. [Copyright &y& Elsevier]

Abstract: Biotite is a constituent Fe-bearing mineral of Delta subsoils in India and Bangladesh and has been hypothesized as a primary source of arsenic (As). The adsorption behavior of As onto structural Fe(II, III)-bearing biotite fractions (<50μm) was investigated in the pH range of 4–8 under a CO2-free, anoxic condition (O2 <1ppmv) using X-ray Photoelectron Spectroscopy (XPS) and X-ray Absorption Spectroscopy (XAS). The batch experiments indicate that As adsorption is strongly pH dependent and that As(V) adsorbs more efficiently than As(III). X-ray Absorption Near-Edge Structure (XANES) spectra show no oxidation or reduction of As by biotite after reaction with As(III) or As(V) solutions for 3days. Extended X-ray Absorption Fine Structure (EXAFS) spectroscopic results suggest that As(III) forms bidentate mononuclear edge-sharing (2E) and bidentate binuclear corner-sharing (2C) surface complexes at pH 7.7 as indicated by average As–Fe bond distances at 3.00±0.02Å and 3.37±0.03Å respectively. The surface speciation retrieved by XPS does not provide any evidence of reduction of As(V) on biotite after 30days further confirming the thermodynamic prediction and the XANES results. This study has therefore significant environmental implications for As contaminated areas, where biotite retards the release of As into reducing groundwater. The changes in soil redox conditions and weathering of biotite may likely contribute to the occurrence of high As in groundwater. [ABSTRACT FROM AUTHOR]

Abstract: A microbial consortium DAS consisting three bacterial sp. originally obtained from dye contaminated sites of Solapur, India was selected because it was capable of decolorizing textile effluent and dye faster than the individual bacteria under static conditions. Identification of the isolates by 16S rRNA techniques revealed the isolates to be Pseudomonas species. The concerted metabolic activity of these isolates led to complete decolorization of textile effluent as well as Reactive Orange 16 (100mgl−1) within 48-h at pH 7 and 30°C. Studies involving Reactive Orange 16 (RO16) dye were carried with the bacterial consortium DAS to elucidate the mechanism of biodegradation. Induction of the laccase and reductase enzyme during RO16 decolorization indicated their role in biodegradation. The biodegradation of RO16 was monitored by using IR spectroscopy, HPLC and GC–MS analysis. Cytotoxicity, genotoxicity and phytotoxicity studies carried out before and after decolorization of the textile effluent revealed the nontoxic nature of the biotreated sample. [Copyright &y& Elsevier]

Abstract: Arsenic-enriched groundwater has been a pressing human health issue for more than a decade, with tens of millions of people worldwide being at risk of chronic As poisoning through the consumption of As-burdened groundwater. To elucidate the importance of dissolved S on the scale of As concentrations, the composition of groundwater samples from 926 locations spanning over the floodplains of three severely arsenic affected regions in Asia (Bengal-, Mekong-, Red River deltas), were assessed. A binary mixing model based on Cl− or B as conservative tracers implies that two types of water may be regarded as end-members with respect to groundwater composition in these deltas, namely surface derived water (approximated by river water) and saline water identical to residual sea water. Six redox zones were distinguished by comparing the model-calculated concentrations with the measured values. Only one zone (denoted methanogenic) had very high average As concentrations and they were significantly higher than in the other zones – for all three regions, regardless of applying Cl− or B as a tracer in the model. Average As concentrations±standard error in the methanogenic zone were 182±23μgL−1 (n =50%), 41±6μgL−1 (n =43%), and 61±20μgL−1 (n =24%) in the Mekong, Red River and Bengal delta, respectively. Arsenic levels were significantly lower in the SO4-reducing and the Fe-reducing zones, where averages were 23±7μgL−1 (n =27%, zone I), 14±3μgL−1 (n =48%, zone S) and 26±9μgL−1 (n =64%, zone S). These results suggest that a sufficient supply of inhibits the release of As to groundwater and that reduction may be as important as Fe reduction in controlling the enrichment of As in groundwater. [Copyright &y& Elsevier]