Search

Stereolithography (SLA) 3D printing of pharmaceuticals suffers from the problem of light scattering, which leads to over-curing, resulting in the printing of objects that are non-compliant with design dimensions and the overloading of drugs. To minimize this problem, photoabsorbers such as tartrazine (food grade) can be used to absorb the stray light produced by scattering, leading to unintended photopolymerization. Ghost tablets (i.e., non-erodible inert matrices) were additively manufactured using SLA with varying ratios of polyethylene glycol diacrylate (PEGDA): polyethylene glycol (PEG) 300, along with tartrazine concentrations. The 3D printed ghost tablets containing maximum (0.03%) tartrazine were extremely precise in size and adhered to the nominal value of the metformin hydrochloride content. Resolution analysis reinstated the influence of tartrazine in achieving highly precise objects of even 0.07 mm2 area. Furthermore, 3D printed ghost tablets were characterized using analytical means, and swelling studies. Additionally, ghost tablets were tested for their mechanical robustness using dynamic mechanical and texture analysis, and were able to withstand strains of up to 5.0% without structural failure. The printed ghost tablets displayed a fast metformin hydrochloride release profile, with 93.14% release after 12 h when the PEG 300 ratio was at its maximum. Ghost tablets were also subjected to in vivo X-ray imaging, and the tablets remained intact even after four hours of administration and were eventually excreted in an intact form through fecal excretion. [Display omitted] [ABSTRACT FROM AUTHOR]

Analytical sample preparation techniques are regarded as crucial steps for analyzing compounds from different biological matrices. The development of new extraction techniques is a modern trend in the bioanalytical sciences. 3D printed techniques have emerged as a valuable technology for prototyping devices in customized shapes for a cost-effective way to advance analytical sample preparation techniques. The present study aims to fabricate customized filaments through the hot-melt extrusion (HME) technique followed by fused deposition modeling mediated 3D printing process for rapid prototyping of 3D printed sorbents to extract a sample from human plasma. Thus, we fabricated our own indigenous filament using poly (vinyl alcohol), Eudragit® RSPO, and tri-ethyl citrate through HME to prototype the fabricated filament into a 3D printed sorbent for the extraction of small molecules. The 3D sorbent was applied to extract hydrocortisone from human plasma and analyzed using a validated LC-MS/MS method. The extraction procedure was optimized, and the parameters influencing the sorbent extraction were systematically investigated. The extraction recovery of hydrocortisone was found to be >82% at low, medium, and high quality control samples, with a relative standard deviation of <2%. The intra-and inter-day precisions for hydrocortisone ranged from 1.0% to 12% and 2.0%–10.0%, respectively, whereas the intra-and inter-day accuracy for hydrocortisone ranged from 93.0% to 111.0% and 92.0% to 110.0%, respectively. The newly customizable size and shape of the 3D printed sorbent opens new possibilities for extracting small molecules from human plasma. [Display omitted] • Developed indigenous filaments through hot-melt-extrusion technique followed by 3D printed sorbent. • 3D printed sorbents used for sample extraction of molecule. • The extraction recovery of hydrocortisone was found to be >82% with <2% relative standard deviation. [ABSTRACT FROM AUTHOR]