Search

Abstract: In recent years, there have been growing international challenges relating to climate change and global warming, with a conflict developing between the need to create a low-carbon economy and rapid depleting reserves of fossil fuels. In addition to these challenges there continues to be the added complexity of a significant global increase in energy demand. Marine renewable energy from tidal barrages is carbon-free and has the potential to make a significant contribution to energy supplies now and in the future. Therefore, it is appropriate to evaluate the total energy that can be extracted from such barrages. In this study two different methods are proposed to estimate the total annual energy output from a barrage, including a theoretical estimation based on the principle associated with tidal hydrodynamics, and a numerical estimation based on the solutions obtained from a 2D hydrodynamic model. The proposed Severn Barrage in the UK was taken as a case study, and these two methods were applied to estimate the potential annual energy output from the barrage. The predicted results obtained using the two methods indicate that the magnitude of the annual energy output would range from 13 to 16TWh, which is similar to the value of 15.6TWh reported by the Department of Energy and Climate Change, in the UK. Further investigations show that the total annual energy output would increase by about 15% if a higher discharge coefficient were to be adopted for the sluice gates, or if the turbine performance were to be improved. However, the estimated annual energy output could exceed the value of 16TWh if future technological advances in both sluice gate construction and turbine performance are included. [Copyright &y& Elsevier]

Abstract: The Severn Estuary has a spring tidal range approaching 14m and is regarded as having one of the highest tidal ranges in the world. Various proposals have been made regarding the construction of a tidal barrage across the estuary to enable tidal energy to be extracted. The barrage scheme originally proposed by the Severn Tidal Power Group (STPG) would be the largest project for tidal power generation in the world if built as proposed. Therefore, it is important to study the impact of different operating modes for this barrage on the tidal power output and flood inundation extent in the estuary. In this paper, an existing two-dimensional hydrodynamic model based on an unstructured triangular mesh has been integrated with a new algorithm developed for the estimation of tidal power output, which can account for three barrage operating modes, including ebb generation, flood generation, and two-way generation. The refined model was then used to investigate the impact of different barrage operating modes on the tidal power output and the associated extent of flood inundation along the Severn Estuary. Predicted results indicate that the mode of flood generation would produce the least electrical energy and cause a larger reduction in the maximum water levels upstream of the barrage. Two-way generation would provide an improvement to these conditions, and produce an equivalent amount of electricity to that from ebb generation, with a low installed capacity and a small loss of intertidal zones. Therefore, the mode of ebb generation or two-way generation would appear to be a preferred option for power generation, because both would offer benefits of acceptable electrical energy and reduced flood risk. [Copyright &y& Elsevier]

Abstract: The Severn Estuary, located in the UK between south east Wales and south west England, is an ideal site for tidal renewable energy projects, since this estuary has the third highest tidal range in the world, with a spring tidal range approaching 14m. The UK Government recently invited proposals for tidal renewable energy projects from the estuary and many proposals were submitted for consideration. Among the proposals submitted and subsequently shortlisted were: the Cardiff–Weston Barrage, the Fleming Lagoon and the Shoots Barrage, all three of which are nationally public interest. Therefore a two-dimensional finite volume numerical model, based on an unstructured triangular mesh, has been refined to study the hydrodynamic impact and flood inundation extent, post construction, of all three of these proposed tidal power projects. The model-predicted hydrodynamic processes have been analysed in detail, both without and with the structures, including the discharge processes at key sections, the contours of maximum and minimum water levels, the envelope curves of high and low water levels, the maximum tidal currents, the local velocity fields around the structures and the mean power output curves. Simulated results indicate that: (i) although the construction of the Cardiff–Weston Barrage would have an adverse impact on a range of environmental aspects, due to there being approximately a 50% decrease in the peak discharge entering the upstream region, it would reduce the maximum water levels upstream of the barrage by typically 0.3–1.2m, which could be positive in respect of coastal flooding; (ii) the construction of the Fleming Lagoon would have little influence on the hydrodynamic processes in the Severn Estuary; and (iii) the construction of the Shoots Barrage would decrease the maximum water levels upstream of the M4 bridge by between 0.3 and 1.0m, but it could lead to an increase in the maximum water levels downstream of the barrage by typically 20–30cm. [Copyright &y& Elsevier]