Search

Nanocellulose is a promising biopolymer compound which is produced from pulp. However, the traditional approaches do not produce it in an energy efficient and sustainable way. The production of nanocellulose through moderate refining and froth flotation has the potential to reduce the traditional nanocellulose production cost. This technoeconomic analysis explores the financial profitability of using moderate refining followed by enhanced froth flotation technology at pilot scale (best case scenario) to produce nanocellulose in an affordable and sustainable way. With a 100% nanocellulose yield, the yearly the operational cost was $7312 AUD/ton nanocellulose for the best-case scenario. The 25-year NPV coming from discounted cumulative cash flow rate for best case scenario is approximately 9.5 million AUD (profit). From the sensitivity analysis it was revealed that the key driver behind profitability of nanocellulose production is Capital Cost and Labour cost. Lastly four different case scenarios are explored to examine the economic viability for commercial scale nanocellulose production. For a similar level of nanocellulose pulp quality development, there is an energy savings of approximately 5000 kWh/t (aspect ratio), 2000 kWh/t (fines) and 15,000 kWh/t (volumetric specific surface) in moderate refining combined with enhanced flotation at bench scale, when compared with extensive refining stand alone. There is minimal or no energy savings when flotation is used at a laboratory scale. Technoeconomic assessment for nanocellulose production at pilot scale was evaluated and compared with that of bench scale and it was revealed that moderate refining followed with flotation at pilot scale is most economical. The high ROI of 175.3% and NPV of $9.5 million for moderate refining along with flotation at pilot scale demonstrates flotation technology is worth investing for nanocellulose production at pilot scale. [Display omitted] • Bench vs pilot scale comparison for nanocellulose production. • Harnessing the energy saving and financial profitability of flotation technology. • Capital expenditure and Labour Operating cost are major economic factors. • Enhanced bench scale flotation is energy efficient. [ABSTRACT FROM AUTHOR]

With increasing environmental concerns with respect to the petroleum-based adhesive production process, bio-based adhesive has been explored as a promising replacement. The purpose of this paper was to explore the economic feasibility of structural bio-adhesives made from glycerol, a byproduct of biodiesel production. SuperPro Designer software was employed to perform the techno-economic analysis. Several key parameters were analyzed, such as total capital investment, annual operating costs and revenues. It was found that the unit production cost of structural bio-adhesives ($2.45/kg) was compatible with that in the current market. Three different scenarios were built to investigate the worst-case scenario and the best-case scenario associated with this production process. Sensitivity analysis was also performed to evaluate the key parameters significantly influencing the economic result. In this study, material cost was determined to be the most significant factor throughout the production process. Discounted cash flow analysis was conducted to explore the influence of the time value of money. The minimum selling price obtained was $3.11/kg for this bioadhesive production process. Underlying issues and areas needed for improvement were also discussed in this study. Image 10624 • A techno-economic analysis was conducted on glycerol-based structural bioadhesive. • Material cost was determined as the most sensitive parameter in the process. • Minimum selling price of the structural bioadhesive was determined to be $3.11/kg. [ABSTRACT FROM AUTHOR]

Among renewable sources giant reed has attracted a growing interest as energy crop especially in Southern Europe, thanks to its low agronomic input requirements. This paper aimed at evaluating the economic feasibility of introduction of giant reed plantation as energy crop in the Southern Italy. In particular, an economic and financial analysis was performed by comparing giant reed (both for woodchip and chopped forage production) with traditional crops (pluriannual and annual) that are currently cultivated in the same area, such as wine grape, melon and tomato. Results showed the highest profitability of giant reed respect to other crops with current market prices. In particular, giant reed destined to woodchip production denoted the highest annual gross margin with a value of 647.10 € ha −1 , followed by giant reed for silage production (617.04 € ha −1 ), wine grape (477.52 € ha −1 ), melon (310.00 € ha −1 ) and tomato (280.00 € ha −1 ). However, it should be considered that, as the cultivation of energy crops subtracts inevitably surface to the agricultural land, it would be desirable that the giant reed does not conflict with agri-food production, but valorizes marginal and/or unproductive areas. [ABSTRACT FROM AUTHOR]

The increase of renewable energy production worldwide, occurred in the last years, is also attributable to some agroforestry species cultivated according to the short rotation coppice technique. Although these species are able of enhancing abandoned or marginal land leading to numerous environmental benefits, an increasing number of farmers are introducing them in place of agricultural crops. Therefore, since for a farmer economic sustainability is one of the main factors to introduce a biomass crop, the study aimed at evaluating the profitability of Paulownia, a species that has been spreading in recent years. In particular, an economic analysis has been carried out in a Southern Italian farm in which Paulownia has recently replaced a vineyard, by adopting a discounted cash flow approach. The results show that the Paulownia for both timber and woodchip production, with an annual gross margin equal to 357.91 € ha−1, can represent a valid alternative compared to wine grape (237.41 € ha−1), while Paulownia for exclusively biomass production has almost zero profitability (4.22 € ha−1). However, the profitability depends not only on the product typology but also on the future market price fluctuations, on the subsidies or incentives, as well as on adequate choices by entrepreneurs for the creation of sustainable supply chains also from an environmental and social point of view. [Display omitted] • SRCs have denoted a rapid diffusion in the last years in UE also in Mediterranean area. • SRCs are grown not only in abandoned or marginal land but also in place of traditional crops. • Paper evaluates the economic profitability of SRC Paulownia in a southern Italian farm. • Results show the higher profitability for Paulownia compared to wine grape. • Market price variations and entrepreneurial choices affect profitability but also environmental and social sustainability. [ABSTRACT FROM AUTHOR]

• The state of São Paulo offers ten potential scenarios for the establishment of biorefineries. • Eucalyptus residues are a promising feedstock that produces 71,000 tons of bio-oil/year. • The minimum selling price of bio-oil varies according to plant capacities between from $11.6 to 19.3/GJ. • The minimum selling price of bio-oil is particularly sensitive to plant capacity and yield. • Co-processing bio-oil with vacuum gasoil can contribute 3.4 % of total "green fuel" in Brazil. Forestry residue is potentially useful for obtaining bio-oil and its by-products (biochar, syngas, and acid-rich aqueous extract) via fast pyrolysis. As such, we carried out a techno-economic analysis of both the production of bio-oil from Eucalyptus grandis residues (ER) and their availability in the state of São Paulo, Brazil. Discounted cash flow was used to calculate the minimum selling price (MSP) of bio-oil. Georeferencing identified the location of 20 Eucalyptus plantations, ten of which were selected due to their better economic performance. These ten plantations were potentially able to produce 59 million L/year of bio-oil. The economic analysis of the future biorefineries showed that an MSP of 11.6–19.3 $ (US)/GJ could support the processing of 60,000–5,000 tons/year of ER. A simulation of a large biorefinery revealed a capital investment (CAPEX) of around 6 M$ (US), reaching an operating expenditure peak of approximately 3 M$/year. The sensitivity analysis identified that plant capacity had the most significant impact on MSP, while the by-products (acid extract and biochar) lowered this by 22 %. The large biorefinery simulated using the Monte Carlo method had an 80 % chance of reaching a net present value (NPV) > 0, and an 80 % probability of reaching an internal rate of return (IRR) > 10 %. This study demonstrated that the production of bio-oils by the ten simulated centralized biorefineries is economically viable based on the NPV and IRR indicators. [ABSTRACT FROM AUTHOR]

Residential solar photovoltaic (PV) installations have boomed in China over recent years. However, knowledge about the economic performance of residential PV investments is still limited. Therefore, this study attempts to make a complete economic assessment of residential PV systems at the county-level. After a brief description of China's incentive policies, a model is constructed with economic measures of internal rate of return and payback period based on discounted cash flow. Then, a reference PV system of 5 kW p is investigated in 2181 geographical areas using scenario analysis and sensitivity analysis. There is breakeven for residential PV investments all over China even without incentives. The areas with good performance of residential PV investments are located mostly in Northern China (Shandong and Hebei), Southern China (Guangdong and Hainan), northeast China (Liaoning, Jilin, and Heilongjiang), and southwest China (Sichuan and Tibet). The boom of residential PV installations is likely to recede in 2021 as the population with acceptable profitability declines since the central and local subsidies expire. But some excellent residential PV suppliers have the potential to compensate for the performance decrease in many ways such as increasing annual generation and reducing initial cost. This paper contributes by providing some insights into the economic performance and market of residential PV installations in China. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) systems transform solar irradiation into electricity, thereby substituting for traditional energy sources and reducing environmental pollution. The present work evaluates a developed market (Italy) in which subsidies have been re-introduced for PV plants with a nominal capacity above 20 kW through the FER1 (renewable energy sources) Decree. The discounted cash flow (DCF) methodology is applied to several cases of PV plants in public buildings, in order to determine the value of several critical variables (i.e. level of insolation, plant size, share of self-consumption, investment cost, electricity purchase price). In particular, differences in net present value (NPV) and discounted payback time (DPBT) between subsidy and no-subsidy scenarios are quantified. Break-even point (BEP) analysis is used to define the share of self-consumed energy for which NPV is positive. This share is found to range from 9 to 28% in 105 kW plants and from 10 to 35% in 25 kW plants. In addition, the results verify profitability in almost all of the baseline case studies and only half of the alternative scenarios (involving no subsidies). The estimated profits are consistent with investments aimed at increasing the share of self-consumed energy. • The proposed economic model supports public decision makers. • The economic model is based on both baseline and alternative scenarios. • PV systems realized on public buildings can be economically viable. • PV plant profitability is not verified in half of the cases without subsidies. • Share of self-consumed energy is the key variable in the economic assessment. [ABSTRACT FROM AUTHOR]

The mining industry produces large volumes of mine tailings – a mix of crushed rocks and process effluents from the processing of mineral ores. Mine tailings are a major environmental issue due to implications related to their handling and storage. Depending on the mined ore and the process used, it may be possible to recover valuable elements from mine tailings, among them critical raw materials (CRMs) like rare earths, vanadium, and antimony. The aim of this study was to investigate the techno-economic feasibility of producing critical raw materials from mine tailings. Data from 477 Chilean tailings facilities were analyzed and used in the techno-economic assessment of the valorization of mine tailings in the form of CRMs recovery. A review of applicable technologies was performed to identify suitable technologies for mine tailings processing. To assess the economic feasibility of CRMs production, net present value (NPV) was calculated using the discounted cash flow (DCF) method. Sensitivity analysis and design of experiments were performed to analyze the influence of independent variables on NPV. Two options were assessed, rare earth oxides (REOs) production and vanadium pentoxide (V 2 O 5) production. The results show that it is possible to produce V 2 O 5 with an NPV of 76 million US$. In the case of REOs, NPV is positive but rather low, which indicates that the investment is risky. Sensitivity analysis and the ANOVA run using the design of experiments indicated that the NPV of REOs is highly sensitive to the price of REOs and to the discount rate. [ABSTRACT FROM AUTHOR]