Search

This study compared the diagnostic ability of computed tomography (CT), magnetic resonance imaging (MRI), ultrasonography (US), and positron emission tomography/CT (PET/CT) for extracapsular spread. MEDLINE, EMBASE, China National Knowledge Infrastructure, Chinese Biomedical Literature Database, and Sciencepaper Online databases were searched. The mean sensitivity of CT was 0.77, specificity was 0.85, positive likelihood ratio (LR+) was 4.839, negative likelihood ratio (LR−) was 0.287, diagnostic odds ratio (DOR) was 19.239, area under the summary receiver operating characteristic curve (AUC) was 0.8615, and Q * was 0.7922. The mean sensitivity of MRI was 0.85, specificity was 0.84, LR+ was 4.615, LR− was 0.191, DOR was 60.270, AUC was 0.9454, and Q * was 0.8844. The sensitivity and specificity of PET/CT were both 0.86. The mean sensitivity of US was 0.87 and specificity was 0.75. Overall, CT had the lowest sensitivity ( P = 0.0355); specificity was similar for all methods ( P = 0.1159). CT and MRI had equivalent summary diagnostic efficacy (AUC and Q *) ( P > 0.05). This evidence indicates that CT might have a relatively lower sensitivity when diagnosing ECS, and that CT and MRI may be similarly effective in diagnosing ECS. MRI showed positive trends in diagnosing ECS. Evidence was lacking for PET/CT and US diagnosis. More related studies are required to confirm these inconclusive results. [ABSTRACT FROM AUTHOR]

Purpose/objective(s): A biologically guided radiotherapy (BgRT) system was developed and equipped with a novel O-ring gantry Linac, positron emission tomography (PET) and computed tomography technologies. This architectural design is to support real-time PET-guided treatment, termed biology-guided radiotherapy. To reduce latency between PET data acquisition and radiation delivery, the BgRT system incorporates a fast-transitioning binary multi-leaf collimator (MLC) leaves sandwiched between a split-jaw. This study reports the dosimetric commissioning of the first clinical BgRT machines at our institution, and compared with the reference data provided by the manufacturer.Materials/methods: The dosimetric commissioning of the 6 MV flattening filter-free (FFF) photon beam was characterized using a 3D water phantom and diode detectors at a source to surface distance of 85 cm. In-air profiles of 40cm x 2cm field, 40cm x 1cm field, and various leaf combinations plus in water PDD data of 12 field sizes (1.25, 2.5, 5, 10, 20 and 40 cm MLC opened leaves with 1 and 2cm jaw settings) were acquired first for beam modeling. Additional longitudinal and transverse profile scans were performed for these 12 field sizes at the depth of 1.5, 5, 10, 15 and 20 cm to verify the beam model accuracy. The relative outputs factors were measured with the W2 1mmx1mm scintillator at the depth of 10cm for the field sizes from the smallest 0.6cm x 1cm to the maximum 40cm x 2cm.Results: For the PDDs of reference field size of 10cm x 2cm measured at Stanford, the maximum doses (dmax) were 12.5mm within the manufacturer's reference range of 13 ± 0.75 mm. The percentage doses at 10cm depth (d10) at reference field size were 56.9% and 57.6% for Stanford and RefleXion measurements, respectively. The longitudinal field sizes for all tested fields were agreed within 0.5mm and the transverse off-axis ratio is within 1% in the beam core (80% of nominal field size). The output factors measured at our institute were ranging from 0.706 to 1.012 relative to the reference 10cm x 2cm field.Conclusion: This evaluation represents the first commissioning evaluation of the dosimetric characteristics of the BgRT system with architecture designed to accommodate both PET detector and LINAC subsystems. This data will serve as a clinical reference for the BgRT treatment planning system's beam model and can act as a standard for comparison and beam model improvement for units installed at future clinical sites. [ABSTRACT FROM AUTHOR]

Purpose/objective(s): To evaluate Biology-guided Radiotherapy (BgRT) plans generated using PET data acquired on the first installation of the Reflexion™ X1 system. BgRT treatment planning optimizes for fluence indirectly by calculating firing filters that best translate the X1 acquired PET image to the fluences that deliver the prescribed radiation dose. During a treatment session, the firing filters are applied to limited time sampled (LTS) PET images to calculate delivery fluences.Materials/methods: An FDG fillable phantom insert that consists of a 22 mm diameter spherical target (PTV1, ball) and a C-shape object (PTV2 with 26mm axial length, 255° partial annulus with major and minor radii of 27 mm and 12 mm) was imaged using a CT Simulator to create planning contours. The water filled insert surrounding these objects was filled with FDG to simulate a warm background. Both targets were filled with FDG, simulating a target to background ratio of 8:1. Two different BgRT treatment plans were generated for PTV1 simulating homogenous uptake, and PTV2 with an inhomogeneous FDG uptake due to necrosis (a cylinder encompassing the C shape PET avid object). A structure that is 12.5 mm away from these targets was used to simulate OAR. Two PET/CT imaging acquisitions were performed on the RefleXion X1 masking the signal outside of each target plus 10 mm margin. Two different BgRT plans were generated prescribing 50 Gy delivered in 5 fractions to each target, separately. The quality of each treatment plan was evaluated based on PTV coverage, Conformity Index at 50% and 80% isodose lines (CI50, CI80) and OAR sparing. Both BgRT plans then delivered to the independent quality assurance tool for patient specific QA verification where the 3%/3 mm gamma criteria was used.Results: BgRT plans for both homogenous and heterogenous FDG uptake targets were created successfully. Prescription dose coverages were 94.2% and 96.3% for PTV1 and PTV2, respectively. The maximum OAR doses were 30.9 and 33.0 Gy and average OAR doses were 14.4 and 20.1 Gy for PTV1 and PTV2 plans, respectively. CI50 were 7.7 and 6.8 where CI80 were 2.5 and 2.6 for PTV1 and PTV2 plans. The patient specific QA passed with 100 % for both plans.Conclusion: This is the first report of the BgRT plan creation and QA delivery using a clinical installation of the Reflexion X1 system, opening the potential towards BgRT dose delivery using the real time FDG uptake measurements to biologically guide active radiation beam delivery. The X1 system was able to optimize and deliver the BgRT plans for both homogenous and heterogenous FDG uptake scenarios. BgRT is a new paradigm of dose optimization, where a new set of optimization and evaluation approaches will be needed. [ABSTRACT FROM AUTHOR]

A Biology-guided Radiotherapy (BgRT) based device is designed to use Positron Emission Tomography (PET) signals to achieve tracked dose delivery. The goal of this study is to investigate the dose delivery accuracy in case of interruption during BgRT treatment, and resumption in a separate treatment session for a multi-target delivery, as the PET activity continues to decay. A custom-built large anthropomorphic phantom (LAP) including a 26 mm spherical target with 3D independent motion and two 22 mm spherical targets with 1D sinusoidal motion embedded in water was used. All three targets were filled with FGD in an 8:1 target to background uptake ratio (41.52 kBq/ml in target and 5.19 kBq/ml in background). During BgRT delivery, the treatment was intentionally paused during delivery to the second target and the current treatment session was ended to generate a partial fraction. Then the partial fraction was continued in a new session, where the CT scan localization and PET pre-scan were repeated using the existing PET activity present in the phantom. The newly acquired PET pre-scan, was then used to determine if sufficient PET counts were present to resume treatment delivery. The interruption and recovery algorithm is designed to calculate the fluence that needs to be delivered to the remaining targets as well as the residual fluence to be given to the targets that have already received partial dose prior to the interruption. Once the new fluence is recomputed, the treatment is resumed. The delivered doses were captured using radiochromic film (EBT-XD) inserted in the target as well as post-treatment dose calculations based on the delivered beamlet sequence to evaluate the results in terms of dosimetric coverage and margin loss. The margin loss is calculated as the maximum difference between the distance from the Clinical Target Volume (CTV) contour to the 97% isodose contour in the treatment plan and the on the film. The dosimetric coverage is defined as the percentage of voxels within the CTV that lies within 97% and 130% of the prescribed dose. As shown in the table below, a margin loss of less than 3 mm for all targets and 100% CTV coverage was achieved. After treatment interruptions, the PET safety evaluation based on the PET pre-scan helped to determine whether the treatment could be continued on the same day using the same injected PET activity (an NTS value ≧ 2 and AC value ≧ 5 kBq/ml). This study demonstrated that the BgRT system is able to deliver the prescribed dose to all targets with independent motion, even when an interruption and resumption occurs during treatment. In case such an interruption if the remaining PET activity satisfies the BgRT safety evaluation, the treatment can continue to deliver the remainder of the BgRT doses. [ABSTRACT FROM AUTHOR]

We present the first dosimetric measurements of single session, multi-target BgRT deliveries using a clinically realistic motion phantom on a research-only version of the RefleXion X1 system. A custom-made anthropomorphic phantom of a human torso with embedded fillable targets mimicking 18F-FDG-avid lesions was used. From the three embedded spherical targets, Target 1 was 26 mm in diameter coupled with a 3D independent respiratory motion with 22 mm range, whereas Target 2 and 3 were 22 mm in diameter and moved with a 1D 5 mm maximum sinusoidal motion. The 18F-FDG concentration in the background cavity of the phantom was 5 kBq/ml, and the targets were loaded with 10:1, 8:1 and 6:1 contrast relative to the background for Targets 1, 2, 3, respectively. Spherical structures were contoured as GTVs (CTV = GTV) and a 5 mm margin was added to create PTVs. Motion extent of the tumors were captured to create biological tracking zones for each target. Treatment plans were generated using a research version of the Reflexion treatment planning software to deliver 8 Gy/fx to the PTVs. The treatment delivery was repeated 2 times, and each time the phantom was refilled according to the plan. PET image evaluation metrics for each of the three targets were also recorded. Target dosimetry was measured using a combination of radiographic film and ion chamber. The maximum distance between the 97% prescription isodose line from the plan and the film measurements was used to characterize the dosimetric accuracy of the tracked deliveries. CTV and PTV min, max, and mean doses measured on film were also recorded for each target. Treatment plans were successfully created with 100% prescription dose coverage to each target loaded with different FDG ratios. Total treatment times for the single-plan, three-target deliveries were less than 80 minutes. PET evaluation metrics at imaging-only and pre-scan, and planning and film dosimetry to the GTV and PTV for each of the three targets is shown in table below (mean ± standard deviation of both deliveries). The CTV dose coverage was maintained for all targets. The shrinkage distance of the 97% prescription dose isodose line on the film plane for all three targets was less than 3 mm for both tests, and ranged from -0.4 to -2.34 mm. These results demonstrate that high tracking accuracy and dosimetric accuracy can be achieved in single session, multi-target deliveries over a range of target-to-background 18F-FDG concentrations and target motion patterns. [ABSTRACT FROM AUTHOR]

Biology-guided radiotherapy (BgRT) is a novel tracked dose delivery modality using real-time positron emission tomography (PET) to guide radiotherapy beamlets. The present study was performed with sequential cohorts of participants to evaluate the performance and safety of BgRT. Primary endpoints were previously reported. We hereby report on one of the secondary endpoints assessing a novel treatment planning machine with integrated dual kVCT/PET imaging ("novel device") performance in comparison to a third-party diagnostic PET/CT scan. This single-arm, open-label, prospective study included participants with at least 1 FDG-avid targetable primary or metastatic tumor (≥2cm and ≤5cm) in the lung or bone. PET imaging data were collected on the novel device and on a third-party diagnostic PET/CT performed in sequence once at the planning timepoint in Cohort I, and immediately before the last fraction among patients undergoing stereotactic radiotherapy in Cohort II. Three central read radiation oncologists (CRRO) provided an interpretation of the novel device PET scans which were compared to an agreement standard based on 3 central radiologists' review of the paired diagnostic PET/CT scan. Positive percent agreement for localization of the target tumor within the biology-tracking zone (BTZ) was the key metric because it reflects whether advancing patients to subsequent steps in the BgRT workflow based on the novel device's imaging was ultimately appropriate. In Cohort 1, 6 image comparisons were performed. The positive (%) agreement for the aggregate radiation oncologist review was 100% (5/5), reflecting that in all 5 cases where the aggregate radiation oncologists deemed the tumor to fall within the BTZ based upon the novel device PET images, the central radiologists came to the same conclusion upon review of the paired diagnostic PET/CT images. The overall (%) agreement for the aggregate radiation oncologist review was 83.3% (5/6): localization was not established on the novel device in 1 case, even though it was established on the diagnostic PET/CT. This would not pose risk in real world practice as BgRT candidacy would be aborted for tumors not visible on the novel device. In Cohort II, among the 7 image comparisons, there was 100% positive percent agreement between the aggregate CRRO and the agreement standard as the localization criteria was met in both scans for all 7 patients. This was concordant with a 100% overall percent agreement. This investigation demonstrated a 100% positive percent agreement between central review of this novel device images by radiation oncologists and central review of the accompanying third-party PET/CT images by radiologists. There were no cases where a positive localization by the aggregate CRRO was not confirmed by the third-party PET/CT standard, providing evidence against the likelihood of falsely positive localizations on the novel device that would inappropriately advance patients in the workflow. [ABSTRACT FROM AUTHOR]

Biology-guided radiotherapy (BgRT) is a novel platform that combines real-time PET imaging with a 6MV Linac to target tumors. The performance and safety of BgRT was assessed in the BIOGUIDE-X clinical trial. This study aims to report on the BgRT workflow steps and assess the time required for each step of the BgRT process during this trial. A total of nine patients were enrolled in the second Cohort of the BIOGUIDE-X study which included patients treated with stereotactic body radiotherapy (SBRT) for lung tumors (5) and bone tumors (4). The pre-treatment BgRT workflow includes CT simulation, contouring, imaging-only (BgRT Modeling) PET acquisition, BgRT planning, patient specific QA and plan approval. The imaging-only PET acquisition on the X1 collects a representative PET volumetric 3D image and is an input to develop the BgRT treatment plan. The steps during the BgRT delivery session are kVCT localization, PET pre-scan, PET evaluation and BgRT delivery. The PET PreScan is a 1-pass short-duration PET acquisition that is used to confirm that the PET biodistribution on the day of treatment is consistent with that of the imaging-only PET. During BIOGUIDE-X, the BgRT delivery step was replaced by a 4-pass long-PET acquisition that was used to emulate the expected BgRT dose distribution without turning the beam on. To assess BgRT workflow, times from 18F-FDG injection to image-only PET acquisition, 18F-FDG injection to PET pre-scan, Pre-scan to PET evaluation, and PET evaluation to BgRT delivery (long PET acquisition) were recorded. Time between the 18F-FDG injection and the X1 imaging-only PET scan was 84 ± 19 minutes which includes time for 18F-FDG update. Average time to perform imaging-only PET scan was 26 ± 4 minutes. During the BgRT 'delivery' session, the mean time between the kVCT acquisition and PET pre-scan acquisition was 7 ± 3 minutes. The mean time to acquire a 1-pass PET pre-scan was 6 ± 1 then followed by 6 ± 1 minutes for the PET pre-scan dose calculation to estimate the BgRT doses that it would have delivered for this fraction. On average, the PET reconstruction, the PET signal localization verification and the evaluation of safety metrics took 11 ± 4 minutes. The mean time for BgRT 'delivery' was 27 ± 5 minutes based on the 4-pass long PET acquisition. Time from the start of the BgRT session to the end of the BgRT 'delivery' with this version of the investigative product release was 65 ± 9 minutes. The new processes introduced by the BgRT technology were evaluated and found clinically feasible. Improvements are being undertaken to shorten the time required for each step and to increase patient comfort ahead of BgRT clinical implementation. [ABSTRACT FROM AUTHOR]