Search

Abstract: The flows of paper are analyzed throughout the papermaking processes, with the year 2007 and Korea defined as the system boundaries. In practice, the statistical data on the production, import and export of paper or pulp can be collected with relative ease from the government and industrial associations. However, the input data regarding the volumes of pulp and wastepaper used in different paper products, such as newsprint, printing papers, sanitary and household papers, specialty papers, and corrugating board base, are difficult to obtain because such information is generally kept confidential in the course of corporate operations. The production processes of paper products in Korea are modeled using information on raw materials, their compositions and production yields of products in order to identify and quantify the amounts of pulp and wastepaper used in each paper product. The material flows of paper are then analyzed based on the calculation model derived from the correlation of input and output flows between the individual processes throughout the entire paper lifecycle. Accuracy analysis using both mean absolute error (MAE) and mean absolute percent error (MAPE) is conducted to verify the amounts of pulp and wastepaper calculated from the proposed model against the volumes of domestically consumed pulp and wastepaper provided in the national statistics. Although the calculated values for the past (i.e., the 1980s and 1990s) differ to some degree from the statistical values, the data for the 2000s have a relatively higher level of accuracy, with the MAPE of the total pulp and recycling volume at 5.39% and 5.30%, respectively, thus validating the adequacy of the proposed modeling method. The proposed calculation model can be effectively used in the material flow analysis (MFA) of paper to reduce the burden of data collection and obtain relatively accurate results. [Copyright &y& Elsevier]

• Combined effects of extruded brick compositions with paper sludge and expanded perlite were characterized. • The use of additives in bricks has significantly affected their thermo-physical and mechanical properties. • The effects of process parameters on brick properties were investigated with a new mathematical modeling approach. • Fired brick samples showed good thermal insulation performance. • Produced exruded bricks have good potential for energy saving. Lightweight bricks produced with addition of different additive materials such as expanded perlite (EP) and recycling paper sludge (RPS) waste have been accomplished by a pug mill. Porous fired bricks were produced by using organic and inorganic additives such as paper waste and expanded perlite as pore-makers. In the experimental study, the seventeen mixture sets were prepared with Box-Behnken experimental design procedure of two additive ratios and firing temperatures. The brick samples were produced with shaping by extrusion method and firing at 850, 950 and 1050 °C for two hours after drying. Physical characteristics such as bulk density, apparent porosity and water absorption, and also, compressive strength, thermal conductivity and microstructural properties of brick samples were studied. Influences of process parameters on brick properties were investigated with a detailed neuro-regression analysis. In conclusion, the best brick composition (10 % EP + 10 %RPS by weight) in terms of thermal conductivity corresponding to acceptable mechanical properties was optimized. Accordingly, the compressive strength values of all samples are around 10 to 27 MPa. Also, the samples with high additive content (especially 10 %RPS + 5 %EP sample) exhibited the lowest thermal conductivity value (0.432 W/mK) due to the low firing temperature. [ABSTRACT FROM AUTHOR]

The aim of this paper is the development of a mathematical model to compute the optimal inventory mix to face stochastic demand at minimum cost in a two-level supply chain. The paper addresses a multi-product dynamic lot-sizing problem under stochastic demand subject to capacity and service level constraints. This model is executed to compare a Make To Order (MTO) strategy to a Vendor Managed Inventory (VMI) partnership between the supplier and their customers. Both strategies provide the demand order to be produced. A schedule of production orders is determined over the planning horizon in order to minimize the inventory holding costs of the supply chain, taking into consideration that the supplier is also responsible of initiating the replenishment orders and deliveries of their customers according to the VMI partnership. The simulation model is illustrated empirically using a real case study: a paper manufacturing company that pursues to improve customer service level and supply chain inventory costs through a proper production planning of their paper machines and a suitable VMI order replenishment schedule. [ABSTRACT FROM AUTHOR]

Previous studies have demonstrated that students who are engaged in learning tasks and make errors before receiving instruction on how to complete them, achieve better learning outcomes than students who first receive instruction and then complete the learning activities with the aim of avoiding errors. Although simulation literature often refers to errors as learning opportunities, to date, there is limited understanding of how pedagogical approaches that promote learning from errors can guide the design of simulation-based learning in healthcare education. To (a) present the Learning from Errors conceptual model; and (b) provide an example of how educators can use this model. The Learning from Errors model is drawn from critical elements of two pedagogical approaches, productive failure and error management training and pedagogical features of high-quality healthcare simulations. We describe the Learning from Errors model, which emphasises the need for adopting pedagogical methods that explicitly use errors as learning opportunities and ultimately inform simulation design. We then illustrate the application of this model to a simulation example. The model includes the following elements: i) normalisation of errors, ii) challenging simulation scenarios, iii) self-directed learning, iv) collaborative teamwork and v) comparison with best practice. This discussion paper presents the Learning from Errors conceptual model, an evidence-based approach that can assist educators in the design of simulations that embrace errors as a catalyst for learning. [ABSTRACT FROM AUTHOR]

Abstract: The non-citation rate refers to the proportion of papers that do not attract any citation over a period of time following their publication. After reviewing all the related papers in Web of Science, Google Scholar and Scopus database, we find the current literature on citation distribution gives more focus on the distribution of the percentages and citations of papers receiving at least one citation, while there are fewer studies on the time-dependent patterns of the percentage of never-cited papers, on what distribution model can fit their time-dependent patterns, as well as on the factors influencing the non-citation rate. Here, we perform an empirical pilot analysis to the time-dependent distribution of the percentages of never-cited papers in a series of different, consecutive citation time windows following their publication in our selected six sample journals, and study the influence of paper length on the chance of papers’ getting cited. Through the above analysis, the following general conclusions are drawn: (1) a three-parameter negative exponential model can well fit time-dependent distribution curve of the percentages of never-cited papers; (2) in the initial citation time window, the percentage of never-cited papers in each journal is very high. However, as the citation time window becomes wider and wider, the percentage of never-cited papers begins to drop rapidly at first, and then drop more slowly, and the total degree of decline for most of journals is very large; (3) when applying the wider citation time windows, the percentage of never-cited papers for each journal begins to approach a stable value, and after that value, there will be very few changes in these stable percentages, unless we meet a large amount of “Sleeping Beauties” type papers; (4) the length of an paper has a great influence on whether it will be cited or not. [Copyright &y& Elsevier]

Abstract: The use of paper-mill residuals in concrete formulations provides an alternative to landfill disposal. A response surface statistical methodology was carried out to model the influence on the slump and compressive strength of concrete containing paper-mill residuals with and without Class F fly ash replacement. The variables considered in this study included the water/cement ratio (w/c), paper-mill residual content and fly ash content to total cementitious material (FA/CM). The performance of the derived models to achieve good balance between the workability and compressive strength were further discussed by using the contour diagrams. The results showed that the compressive strength of concrete containing paper-mill residuals could be predicted from the referred slump value. [Copyright &y& Elsevier]

Abstract: The migration of components from paper into Tenax® was studied to determine the influence of molecular size and chemical character of the migrant and the influence of paper characteristics in the migration process. The Weibull model was applied because Fick’s 2nd law of diffusion gave poor fits in some cases. The migration pattern depended on the migrants molecular size and was independent of temperature in the studied range. The migration rate decreased with the migrant molecular size. The influence of the migrants character (polarity and vapour pressure) on the migration behaviour was also studied: nonpolar migrants with high vapour pressure presented low relative migration values and polar migrants presented high values of relative migration. Results indicated that the apparent partition coefficient between paper and the simulant Tenax® increased with the migrant vapour pressure and with both the paper grammage and the recycled pulp content. [ABSTRACT FROM AUTHOR]

Abstract: The conversion of ethanol from paper sludge using the separate hydrolysis and fermentation (SHF) process with cellulase and Saccharomyces cerevisiae GIM-2 were investigated in this paper. Optimization strategy based on statistical experimental designs was employed to enhance degree of saccharification by enzymatic hydrolysis of paper sludge. Based on the Plackett–Burman design, hydrolysis time, substrate concentration and cellulase dosage were selected as the most significant variable on the degree of saccharification. Subsequently, the optimum combination of the selected factors was investigated by a Box-Behnken approach. A mathematical model was developed to show the effects of each factor and their combinatorial interactions on the degree of saccharification. The optimal conditions were hydrolysis time 82.7 h, substrate concentration 40.8 g L−1 and cellulase dosage 18.1 FPU g−1 substrate, and a degree of saccharification of 82.1% can be achieved. When hydrolysate was further fermented with S. cerevisiae GIM-2, the conversion rate of sugar to ethanol was 34.2% and the ethanol yield was 190 g kg−1 of dry paper sludge, corresponding to an overall conversion yield of 56.3% of the available carbohydrates on the initial substrate. The results derived from this study indicate that the response surface methodology is a useful tool for optimizing the hydrolysis conditions to converse paper sludge to ethanol. [Copyright &y& Elsevier]

Abstract: Gas diffusion media (GDM) and flow fields perform the task of distributing the reactant gases uniformly over the active electrochemical area in proton exchange membrane (PEM) fuel cells. Carbon paper and carbon cloth are two commonly employed gas diffusion media in PEM fuel cells, and they differ widely in their structure and properties. Since the path of the reactant gases to the catalyst in the fuel cell electrodes involves passing through the flow fields as well as the GDM, a good design for a fuel cell requires an understanding of the interaction between these components. The focus of the present work is to study the impact of the difference in structure and properties of the diffusion media used, on the design of the PEM fuel cell flow field. Carbon paper and carbon cloth were characterized for the pressure drop they cause when used as GDMs, for channel intrusion, compressibility and electrical resistivity. Carbon cloth exhibits about 43–125% more intrusion into the channel in comparison with carbon paper for the conditions tested. This intrusion results in increased pressure drop in the flow channel especially at higher channel widths and at higher compression. Compression studies reveal that carbon cloth lacks compression rigidity and suffers considerable strain at lower stress values whereas carbon paper is relatively rigid in nature. The results indicate that the intrusion of carbon cloth into the channel, constraints the channel width in a flow field design if it were to be used with a carbon cloth GDM as opposed to a carbon paper GDM. Electrical resistivity measurements were carried out and a simple mathematical model has been developed for the potential drop in the GDM. The model indicates that even from the perspective of electrical properties, use of carbon cloth GDM constraints the channel width that is permissible in flow field design. [ABSTRACT FROM AUTHOR]

Abstract: In this study, the determinability of time related colour changes in prints made using ink that dries on matte coated paper with the offset printing technique and infrared method, has been investigated with artifical neural networks after analysis of the experimental and numerical methods. In the experimental part a ECI 2002 CMYK test scale is printed on a 135g/m2 matte coated. The prints obtained were measured with a spectrophotometer at certain intervals and by converting the reflection data obtained into the CIELAB colour description spectrum, time related changes in printed colours have been determined. In the empirical study however, colour changes in prints made on matte coated paper using inks that dry with the infrared method are modelled numerically. The average deviation has been found to be 0.4%. As a result, artificial neural networks can be used with the aim to digitally calculate time related colour changes in the offset printing system. [Copyright &y& Elsevier]

In this paper, a finite element procedure is used to study the dynamic behaviour of a paper web in a free span between two rollers, including effects of transport velocity and surrounding air. The paper web is modelled as a three-dimensional orthotropic structure. The influence of air is accounted for by utilizing fluid–solid interaction analyses based on acoustic theory. The contribution of transport velocity is included through gyroscopic matrices and forces. The structural response on harmonic excitations has been studied using linear and non-linear models. Results show that air significantly reduces eigenfrequencies of the web. So called “edge-flutter” is nothing but the result of skew tension profile. Excessive web vibration can be eliminated by adjusting the web tension. [Copyright &y& Elsevier]

Abstract: A lot of work has been done in the field of multi-valued model checking home and abroad. But some research works are not perfect. Some problems in the semantic definitions of temporal operators and corresponding model checking algorithms are found in the paper “Model Checking Using Partial Kripke Structure with 3-Valued Temporal Logic”. Some counterexamples are given to show these errors. On the basis of the discussion, some sound semantic definitions of temporal operators and correct algorithms of model checking for some temporal operators are given. [Copyright &y& Elsevier]

Abstract: Effects of mechanical compression and PTFE content on the through-plane gas permeability of gas diffusion layers (GDLs) of PEM fuel cells are investigated both experimentally and theoretically. A new test bed is designed and built which allows pressure drop and air flow rate measurement for various GDL samples. The measured values are used to calculate the through-plane permeability. Various GDLs are obtained and tested over a wide range of PTFE content and compression ratio. The experimental data show a reverse relationship between the through-plane permeability and both PTFE content and mechanical compression. An existing model for through-plane permeability of planar fibrous structures is revisited to develop a model that accommodates effects of PTFE content and mechanical compression. The proposed model captures the trends of the experimental data for the through-plane permeability, measured in the present study or reported by others. [Copyright &y& Elsevier]

Abstract: Although the scale invariance is a main feature of growing networks, evidence from a few modelled networks show that the finite-size effect of network at a fixed time cannot be ignored. We propose a concept of time-dependent scale-free networks, and prove the criteria for the stability and scale-free of growing networks by the degree-growing Markov chain. Our results show the importance of rigorous theoretical analysis for the network science. [ABSTRACT FROM AUTHOR]

Stochastic cellular automata for rock-paper-scissors games are related to Lotka-Volterra model. Simulations are usually performed by two methods local and global interactions. It is well known that the population dynamics with local interaction is stable, where all species coexist. In contrast, global interaction leads to extinction. So far, theories such as mean-field theory and pair approximation have been presented, but they never explained the stable dynamics in local simulation. In the present article, we apply effective medium approximation (EMA) which has been developed in Physics. The effective medium is determined in a self-consistent way. The EMA theory well predicts the stability of population dynamics. Moreover, it fairly explains the aggregation of each species observed in the stationary state. [ABSTRACT FROM AUTHOR]

Abstract: Anaerobic digestion of pulp and paper sludge (PPS) and monosodium glutamate waste liquor (MGWL) was studied in completely stirred tank reactors (CSTR) at 37 ± 2 °C. This work focused on the effect of increased organic loading rate (OLR) on the methane production in long-term experiments. For OLR in the range of (1.5–5.0) kg m−3 d−1 based on VS fed, VFA and SCOD concentrations decreased for the first 10 days and then kept stable at about 2.3 kg m−3 and 4.0 kg m−3 respectively until to the critical OLR of 5.0 kg m−3 d−1; and the methane generation rate enhanced to 0.838 m3 m−3 d−1 during this period until to the reactor failure. Additionally, reaction rate constant k and sludge retention time (SRT) are described on the basis of a mass balance in a CSTR followed a first order kinetic equation. In the present study, values for ym and k were obtained as 0.733 m3 kg−1 of removed VS and 0.07 d−1, respectively. The simple model can apply for dimensioning a CSTR digesting of organic wastes from pulp and paper industries, food processing industries, sewage treatment plants or biogas crops. [Copyright &y& Elsevier]

Abstract: We investigate a population of individuals who play the Rock–Paper–Scissors (RPS) game. The players choose strategies not only by optimizing their payoffs, but also taking into account the popularity of the strategies. For the standard RPS game, we find an asymptotically stable polymorphism with coexistence of all strategies. For the general RPS game we find the limit cycles. Their stability depends exclusively on two model parameters: the sum of the entries of the RPS payoff matrix, and a sensitivity parameter which characterizes the personality of the players. Apart from the supercritical Hopf bifurcation, we found the subcritical bifurcation numerically for some intervals of the parameters of the model. [Copyright &y& Elsevier]

Abstract: Paper is an example of a valuable material that can be recycled and recovered. In this study, a two-stage stochastic revenue-maximization model is presented to determine a long-term strategy under uncertainty for a large-scale real-world paper recycling company. This network-design problem includes optimal recycling center locations and optimal flow amounts between the nodes in the multi-facility environment. The proposed model is formulated with two-stage stochastic mixed-integer and robust programming approaches. The models are solved by commercial software GAMS 21.6/CPLEX 9.0 and the results are compared. The study is followed by the analyses of the results. [Copyright &y& Elsevier]

Abstract: A wide range of mathematical models for multiple effect evaporators in process industry including paper industry are well reported in the literature but not so extensive work on the dynamic behavior of MEE system is available in the literature. In the present study dynamic behavior of multi-effect evaporator system of a paper industry is obtained by disturbing the feed flow rate, feed concentration, live steam temperature and feed temperature. For this purpose an unsteady-state model for the multi-effect evaporator system is developed. Each effect in the process is represented by a number of variables which are related by the energy and material balance equations for the feed, product and vapor flow. A generalized mathematical model which could be applied to any number of effects and all kinds of feeding arrangements like forward feed, backward feed, mixed feed and spilt feed in the MEE system with simple modifications was finally obtained. Finally model for mixed feed sextuple effect falling film evaporators system was solved using MATLAB. For the steady state and dynamic simulation the ‘fsolve’ and ‘ode45’ solvers in MATLAB source code is used respectively. [Copyright &y& Elsevier]

Significant dimensional variations may occur in paper-based materials when subjected to changes in moisture content. Moisture induced deformations are governed by the swelling of individual fibres, which is transferred through inter-fibre bonds to the entire fibrous network. Complex interactions between mechanical and hygro-expansive properties take place in the bonding areas, affecting the overall material response. In most network models, the role of these inter-fibre bonds is not explicitly incorporated. This work presents a periodic meso-structural model for the discrete fibrous network, which considers the free-standing fibre segments and inter-fibre bonds. Despite its simplicity, the reference unit-cell enables the incorporation of relevant micro- and meso-structural features such as network structure, fibres and bond geometry and hygro-elastic properties. The proposed model is solved analytically through a proper homogenization strategy, allowing to recover the paper’s anisotropic hygro-mechanical response in terms of effective elastic constants and effective hygro-expansive coefficients, exploiting the coupling at the meso-structural level between hygroscopic and mechanical behavior. A comparison with experimental results obtained from the literature shows that the presented approach is quite accurate in predicting the overall paper response, thereby revealing the influence of several meso-scale parameters (e.g. fibre orientation, dimensions, mechanical strength). [ABSTRACT FROM AUTHOR]