Search

The paper describes a series of short-term in-isolation tensile tests that were carried out to investigate the load–strain–time performance of typical knitted polyester (PET), biaxial polypropylene (PP) and uniaxial high-density polyethylene (HDPE) geogrid products. The specimens were subjected to constant rate of strain (CRS) loading and variable rate of strain (VRS) loading. Variables between test specimens included specimen length and specimen aspect ratio (e.g. number of ribs). A novel feature of these tests was that internal strains in the specimens were recorded using non-contact measurements taken with a video-extensometer apparatus. The data shows that at large strains the PP and HDPE geogrid specimens exhibited large lateral strains while lateral strains were negligible for the PET product. Results of CRS tests carried out with different specimen aspect ratios showed that there was no change in tensile strength, axial strain and lateral strain at rupture for HDPE and PET materials. The PP material in this investigation did show an increase in axial and lateral strain at rupture for a specimen tested at an aspect ratio approaching one. The polyolefin geogrids (PP and HDPE) were shown to exhibit tensile stiffness and ultimate tensile load capacities that increased with rate of strain. Implications of the contractive behaviour of the polyolefin geogrid products to the selection of in-soil reinforcement stiffness values and rheological modelling are identified. [Copyright &y& Elsevier]

Abstract: The paper describes the novel use of recycled construction and demolition waste (RCDW) material as the backfill material in an otherwise conventional 3.6-m high wrapped-face geosynthetic reinforced soil wall. The wall was constructed over a collapsible foundation soil which is common in the area around the capital city of Brasilia. The wall was instrumented and then monitored though dry and wet rainy seasons. The influence of cumulative rainfall on foundation compressibility was detectable and seasonal wetting and drying was shown to quantitatively influence wall deformations, settlement, horizontal earth pressures and reinforcement strains. Nevertheless, wall performance was judged to be satisfactory when compared to the performance of other walls of similar size constructed with traditional select granular soils over non-collapsible foundation soils. The results of this investigation demonstrate that significant project cost savings may be possible by avoiding more expensive traditional backfill materials and larger societal economic savings accrued by diverting RCDW waste streams from landfills. [Copyright &y& Elsevier]