Search

Hydraulic fracturing, a production enhancement technique, is widely used in the development of unconventional oil and gas reservoirs. The formation of a complex network of hydraulic fractures that connect with natural fractures is crucial for hydraulic fracturing in unconventional reservoirs. However, the current understanding of vertical fracture propagation behavior under the influence of variations in the mechanical properties of interbedded rock is insufficient to meet the requirements for simulations of unconventional reservoirs under complex geological conditions. In this study, a three-dimensional discrete grid method was employed to establish a model of three-dimensional fracture propagation. Numerical simulations were conducted to investigate the vertical growth of fractures while considering the influence of bedding planes. The effects of formation factors (stress, Young's modulus) and bedding planes (cohesion, density) on the height growth of hydraulic fractures were explored. The results indicated that the interbedded stress contrast, Young's modulus contrast, and bedding planes collectively controlled the height growth of hydraulic fractures. The height of hydraulic fractures decreased with increasing minimum horizontal principal stress of adjacent layers. When the minimum horizontal principal stress of adjacent layers exceeded the vertical stress, hydraulic fractures gradually deflected into the horizontal plane. Adjacent layers with large values of Young's modulus promoted the height growth of hydraulic fractures, while adjacent layers with small values of Young's modulus inhibited the height growth of hydraulic fractures. The presence of bedding planes further suppressed height growth, and the degree of suppression was related to the cohesion and density of the bedding planes. Weaker cohesion and higher density resulted in greater suppression. The results of this study provide a reference for the design and optimization of hydraulic fracturing treatments in unconventional oil and gas reservoirs. [ABSTRACT FROM AUTHOR]

The existence of solid hydrate in porous media always greatly reduces the relative permeability, which limits the development of hydrate reservoirs. Therefore, to recover the gas, it is necessary to carry out reservoir reconstruction measures that induce fractures around the production wells to increase the gas production of hydrate reservoirs. At present, there is limited quantitative research on the promotion of gas production by induced fractures in hydrate reservoirs. In this paper, numerical models of Class Ⅲ hydrate reservoirs with induced fractures are established. By comparing the gas production with and without induced fractures, the effectiveness of induced fractures in promoting the depressurization production of natural gas hydrates is verified. An index of improved efficiency is established and calculated to measure the promotion effect of induced fractures during the fracture promotion stage. The multiple regression calculation formulas of improved efficiency with reservoir geological parameters are obtained by integrating nonlinear regression and linear regression. The calculation model is helpful to quickly and directly measure the rationality and economy of the induced fracture depressurization method to promote hydrate development. • Numerical models of Class Ⅲ hydrate reservoirs with induced fractures are established. • An index of Improved Efficiency is established to measure the promotion effect of induced fractures. • The improved efficiency of induced fractures under different geological parameters is calculated and compared. • The multiple calculation formulas of improved efficiency with geological parameters are obtained by stepwise regression. [ABSTRACT FROM AUTHOR]