Search

Copper-promoted iron oxides are commonly utilized in high-temperature water-gas shift (WGS) reactions. Although the promotional effect of Cu has been previously documented, the nature of the active sites for Cu/Fe 3 O 4 remains debated and the role of the crystallite size of Fe 3 O 4 has not been tackled. In this study, a wide range of Cu/Fe 3 O 4 catalysts were designed by hosting Cu species onto Fe 3 O 4 of two contrasting crystallite sizes (approximately 10 and 160 nm) and by utilizing different preparation methods (ammonia evaporation and deposition-precipitation). The evaluation of their catalytic WGS performances revealed a remarkable and previously undocumented phenomenon: the addition of Cu resulted in universal activity enhancements only for small Fe 3 O 4 crystals, while the larger analogues displayed decreased activity. This peculiar phenomenon can be explained by the creation of Cu–Fe 3 O 4 interfaces present in the iron oxides of small crystallite sizes. Thorough characterizations, such as advanced electron microscopic, in situ powder X-ray diffractions, in situ diffuse reflectance infrared Fourier transform spectroscopy, and computational studies, suggest strong electronic interactions between the different metal species, facilitated reductions of the individual oxides, and more favorable CO activation at the interfacial sites, all accounting for the promoted activity. [Display omitted] • Influence of Fe 3 O 4 crystallite size in water-gas shift reaction was examined. • Performance of Cu/Fe 3 O 4 in water-gas shift reaction was studied. • The formation of Cu–Fe 3 O 4 interfaces existed on small Fe 3 O 4 crystals. • Promotional effect of Cu was only found on small Fe 3 O 4 crystals. [ABSTRACT FROM AUTHOR]

Iron oxide-based ferrite ceramics, widely applied in high-frequency applications, are conventionally produced through high-temperature sintering processes, often resulting in grain growth and phase transformation. In this study, we used a cold sintering process (CSP) with oxalic acid (OA) as a solvent to consolidate iron oxide (Fe 3 O 4) ceramics at a low temperature of 160 °C. The OA-assisted CSP technique has demonstrated a remarkable capacity to facilitate the dissolution and redeposition of iron oxide ions, leading to the interconnection of Fe 3 O 4 particles, forming densely packed ceramics even at low-temperature sintering. Importantly, CSP maintained particle sizes and hindered phase transitions of Fe 3 O 4. The OA concentrations in CSP had a minimal impact on crystal structure and magnetic properties, but it significantly enhanced microstructural features, density, hardness, and electrical resistance. Compared to reference samples prepared without an aqueous solution or with water alone, the CSP-prepared Fe 3 O 4 ceramics with OA exhibited substantially improved density (a relative density of ∼80 %), mechanical properties (Vickers hardness of 3.5–4.0 GPa), magnetic properties (saturation magnetization >70 emu/g), and electrical resistance (electrical conductivity ∼10−3 S/cm at 102–106 Hz). These findings demonstrate a novel approach to fabricating Fe 3 O 4 ceramics at significantly lower temperatures while still achieving properties comparable to those sintered at high temperatures. [ABSTRACT FROM AUTHOR]

This work designed a mesoscale method of multi-step reduction of Fe 2 O 3 with H 2 based on Lattice Gas Cellular Automata (LGCA). Particles in the LGCA were marked to distinguish all the reactants, intermediates, products, and inert. A self-organized evolutionary mechanism is designed. The hydrogen reduction of Fe 2 O 3 in the temperature range of 460–550 °C and 650–800 °C was simulated. Results show that the intermediate product Fe 3 O 4 was found in both conditions, and its mass fraction quickly reach a peak at ∼0.8 and gradually decrease thereafter. An "induction period" can be identified in the initial stage of the reaction at 650–800 °C, where the reduction rate is slow due to the hindered formation of FeO. The porosity inside the Fe 2 O 3 particles increases continuously through the reduction process, resulting in significant changes in the flow field around the particles. Consequently, the wake vortex gradually decreases and disappears eventually. • The multiple step reduction of Fe 2 O 3 by hydrogen is investigated in mesoscale. • A mesoscale method with self-organized evolutionary mechanism is developed. • Three obvious reaction rate transitions can be identified at 650–800 °C by the method. • The flow field is altered from internal structural of Fe 2 O 3 changes during reduction. [ABSTRACT FROM AUTHOR]

The utilization of nanoparticles to enhance bacterial activity and boost hydrogen production in fermentation processes has gained significant attention due to their unique properties such as high specific surface area and quantum size. This research aimed to improve the biohydrogen yield from food waste by adding iron oxide nanoparticles (Fe 3 O 4) at various concentrations (50, 75, 100, 150, and 200 mg/l) and titanium dioxide (TiO 2) at different amounts (25–150 mg/l) to a single-stage hybrid (dark/photo) fermentation reactor. After obtaining the optimal amount of these two nanoparticles, the effect of synergic addition of nanoparticles on hydrogen production yield, was investigated at ratios of Fe 3 O 4 /TiO 2 = 50/50 and 100/50 mg/mg. At the ratio of Fe 3 O 4 /TiO 2 = 100/50, the cumulative hydrogen production and yield of hydrogen have increased from 1613 to 3392 ml and 101.60 to 213.66 mlH 2 /gVS, respectively, compared to the control experiment. We also found that the COD removal rate has enhanced from 28% to 40.1%. In the optimal value, the bacterial growth lag phase has also remarkably decreased from 8.19 to 4.81 h. • Synergic application of TiO 2 and Fe 3 O 4 significantly increased biohydrogen purity and production yield. • TiO 2 played an important role in the activity of bacteria in the photo fermentation process. • Fe 3 O 4 played an important role in the dark fermentation system. • Nanoparticles may act as a scaffold for enzyme and substrate binding. • Optimal nanoparticle concentration may differ for different bioreactors. [ABSTRACT FROM AUTHOR]

Fe 2-x Sn x O 3 structures grown by RF-DC magnetron co-sputtering. The band gap of Fe 2 O 3 , SnO 2 , Fe 2-x Sn x O 3 structure was calculated as 2.86, 4.06, 2.77 eV, respectively. The Fe 2 O 3 thin film has shown a tetragonal as well as the SnO 2 structure, however, the Fe 2-x Sn x O 3 (0 < x < 1) has shown rhombohedral structure. XPS measurements have shown change in binding energy which is due to the electron exchange of tin-iron with oxygen, and iron - tin oxide structure. This binding energy increases slightly with the chemical environment effect. The films were investigated using scanning electron microscopy (SEM), atomic force microscopy (AFM). In AFM images was seen that the iron oxide structure was pyramidal and the tin oxide structure was spherical, similar to the SEM image. The response of the film to hydrogen gas was measured at flow values of 100, 500 and 1000 ppm at 300 °C. Fe 2 O 3 thin films show 46%, SnO 2 61% and, Fe 2-x Sn x O 3 6.5% response to 1000 ppm H 2 gas. It is seen that the gas sensor response was affected by the morphological and structural features of the grown film. Current vs. time graph for thin films gas sensor. [Display omitted] • Thin films were successfully grown by RF-DC co-sputtering system. • Metal oxide hydrogen gas sensor devices were measured depending on different grown structures. • Fe 2 O 3 , SnO 2 , Fe 2-x Sn x O 3 thin films show 46%, 61%, 6.5% response to 1000 ppm H 2 gas. • Iron oxide and tin oxide have n-type carrier, while iron tin oxide has p-type carrier. [ABSTRACT FROM AUTHOR]

An advanced version of the solution combustion synthesis (SCS) method was developed to prepare iron oxide (IO) nanoparticles, through controlling the agglomeration, size and shape of nanoparticles by assisting a cationic surfactant, "cetyltrimethylammonium bromide (CTAB)" and ethanol. Various IO nanoparticles were prepared in the presence of different CTAB:ethanol molar compositions of 0:0, 0.27:0, 0.55:0, 0.27:17.1, 0.55:17.1 and 0.82:17.1. The morphological evolution from agglomerated-shape particles to the well-dispersed as well as the size- and shape-controlled particles depended directly on the CTAB:ethanol molar composition. A shift from ferromagnetic behavior to superparamagnetic was observed by the application of CTAB along with ethanol, where the lowest blocking temperature (T b , 60 K), highest saturation magnetization (M s , 83.5 emu g−1), zero coercivity and remanance magnetization were revealed for the particles prepared by CTAB:ethanol molar compositions of 0.55:17.1. These particles showed an acceptable specific absorption rate (SAR) value (320 W g−1) as well as no obvious hemolytic and cytotoxic effects. This work provides new insights into advancing the SCS method and thus controlling the morphology, size and shape of metal oxide nanoparticles. [Display omitted] • Controlling the agglomeration, size and shape of nanoparticles in SCS method. • Structural and magnetic properties of particles depended on the CTAB:ethanol ratio. • The agglomerated-free, size- and shape-controlled IO-EC2 structure was developed. • IO-EC2 represented an acceptable SAR value, and no hemolytic and cytotoxic effects. [ABSTRACT FROM AUTHOR]

Materials composed of various constituents with distinct physical or chemical features are named composites. Merging components in the composite structure leads to new properties creation or the intrinsic properties magnification of the components, or synergetic effects. Here, the ternary nanocomposite of copper, nickel, and iron oxides was electrodeposited on the glassy carbon electrode (GCE) surface to facilitate the ethanol electro-oxidation reaction (EOR) and overcome the electrode fouling problem while prolonging its efficiency. The GCEs were modified by three different procedures and activated by CV cycling in an alkaline solution, and their electro-catalytic activity was tested toward EOR. The ternary electrocatalysts prepared by two-steps electrodeposition of their components (Ni,Fe 2 O 3 /Cu and Cu/Ni,Fe 2 O 3) demonstrated higher peak current and more negative peak potential (E pa = 476 mV, I pa = 492 μA, and E pa = 510 mV, I pa = 644 μA, respectively) than the binary electrocatalyst of Ni,Fe 2 O 3 toward EOR. The best electro-catalytic efficiency was acquired for the simultaneous electrodeposition of nano Cu, Ni, and Fe 2 O 3 on the GCE surface (Cu,Ni,Fe 2 O 3 , E pa = 530 mV, I pa = 3179 μA). The physicochemical and electro-catalytic characterizations of the fabricated electrocatalysts were evaluated by various techniques. The fast and facile engineered design of the GCE modification with the ternary Cu,Ni,Fe 2 O 3 components led to a high current density of about 101 mA/cm2 with increased tolerance against poisoning intermediates resulting in longtime stability for EOR in alkaline media. The synergistic effect between nano Ni, Cu, and Fe oxides provided promising properties for the EOR pursuing the construction of a powerful device with commercialization potential. • On-step electrodeposition of Cu,Ni,Fe 2 O 3 ternary nano-composite • Improvement of the electron transfer kinetic of EOR • High tolerance against poisoning intermediates and longtime stability for EOR • Promising electro-catalytic performance of Cu,Ni,Fe 2 O 3 /GCE for EOR • Achievement of a high current density of ∼101 mA/cm2 for EOR [ABSTRACT FROM AUTHOR]

Multicore magnetic iron oxide nanoparticles, nanoflowers (NFs), have potential biomedical applications as efficient mediators for AC-magnetic field hyperthermia and as contrast agents for magnetic resonance imaging due to their strong magnetic responses arising from complex internal magnetic ordering. To realise these applications amenable surface chemistry must be engineered that maintain particle dispersion. Here a catechol-derived grafting approach is described to strongly bind polyethylene glycol (PEG) to NFs and provide stable hydrogen-bonded hydrated layers that ensure good long-term colloidal stability in buffers and media even at clinical MRI field strength and high concentration. The approach enables the first comprehensive study into the MRI (relaxivity) and hyperthermic (SAR) efficiencies of fully dispersed NFs. The predominant role of internal magnetisation dynamics in providing high relaxivity and SAR is confirmed, and it is shown that these properties are unaffected by PEG molecular weight or corona formation in biological environments. This result is in contrast to traditional single core nanoparticles which have significantly reduced SAR and relaxivity upon PEGylation and on corona formation, attributed to reduced Brownian contributions and weaker NP solvent interactions. The PEGylated NF suspensions described here exhibit usable blood circulation times and promising retention of relaxivity in-vivo due to the strongly anchored PEG layer. This approach to biomaterials design addresses the challenge of maintaining magnetic efficiency of magnetic nanoparticles in-vivo for applications as theragnostic agents. Application of multicore magnetic iron-oxide nanoflowers (NFs) as efficient mediators for AC-field hyperthermia and as contrast agents for MR imaging has been limited by lack of colloidal stability in complex media and biosystems. The optimized materials design presented is shown to reproducibly provide PEG grafted NF suspensions of exceptional colloidal stability in buffers and complex media, with significant hyperthermic and MRI utility which is unaffected by PEG length, anchoring group or bio-molecular adsorption. Deposition in the selected pancreatic tumour model mirrors liposomal formulations providing a quantifiable probe of tissue-level liposome deposition and relaxivity is retained in the tumour microenvironment. Hence the biomaterials design addresses the longstanding challenges of maintaining the in vivo magnetic efficiency of nanoparticles as theragnostic agents. [Display omitted] [ABSTRACT FROM AUTHOR]

Microparticles of iron oxide (MPIOs) are increasingly used for contrast generation in magnetic resonance imaging (MRI). In particular, Dynabeads® MyOne™ Tosylactivated MPIOs have enabled sensitive and targeted molecular imaging, e.g. , to detect vascular inflammation. For the first time we measured the relaxivities as well as the molar susceptibility χ M of these MPIOs at 7 T in agarose gels. They are r1 = 0.69 ± 0.03 s−1/mM, r2 = 220 ± 6 s−1/mM, r2* = 679 ± 14 s−1/mM, and χ M = 0.66 ± 0.05 ppm/mM, when expressed with respect to the iron concentration. These material parameters are essential to optimize MRI protocols and progress toward quantitative imaging. To address the heterogeneous nature of the MPIO distributions over the size of a typical MRI voxel, we coupled the MPIOs to a fluorophore to create a bimodal phantom that can be imaged by both Light Sheet microscopy and MRI. In this phantom, the MPIOs produced contrast similar to that found in vivo. The submicron resolution of Light Sheet microscopy images provided a precise measurement of the MPIO spatial distribution in phantoms also imaged by MRI. MPIO aggregates occupying less than one MRI voxel were responsible for alterations in R2* and magnetic susceptibility χ across several MRI voxels. In these cases, the sum of R2* or χ over the affected MRI volume correlated better with the microscopically determined number of MPIOs. These findings were confirmed with simulations performed in the static dephasing regime. The microscopically determined MPIO distribution was also entered directly into the simulation framework, indicating that the bimodal phantom is a useful tool to test theoretical models against experimental measurements. [ABSTRACT FROM AUTHOR]

Fe 3 O 4 has the advantages of unique magnetic stability and low biological toxicity, which can improve pollutants separation efficiency. MXenes are two-dimensional materials and easy surface functionalization that can provide suitable carriers for Fe 3 O 4. In this work, we synthesized magnetic MXene composites by a one-pot method that relies on doping Fe 3 O 4 particles onto Ti 3 C 2 MXene nanosheets by heat treatment. The Fe 3 O 4 /Ti 3 C 2 MXene was analyzed by SEM, XRD, FTIR and XPS techniques, which showed that the material has good tetracycline (TC) removal properties and magnetic separation ability. The results showed that the adsorption capacity of it was 46.42 mg g−1, and the removal efficiency of 0.06 g adsorbent for 50 mL of 30 mg L−1 TC could reach 92.1% in a wide pH range of 4–10, when the adsorption temperature was 25 °C, and the adsorption time was 3 h. The adsorption data were consistent with Langmuir and the proposed second-order kinetic model, and the thermodynamic experiments confirmed that the adsorption of TC was a monolayer physicochemical adsorption coexisting heat-trapping process (ΔH = 15.72 kJ mol−1). In addition, the adsorption of TC by Fe 3 O 4 /Ti 3 C 2 MXene was attributed to the synergistic effect of electrostatic attraction, hydrogen bonding and π-π packing. In conclusion, the saturation magnetization of Fe 3 O 4 /Ti 3 C 2 MXene is 27.3 emu/g and it can not only be separated from water using its strong magnetic properties to avoid secondary contamination, but also can be used as a promising material to effectively remove antibiotics from aqueous media. [Display omitted] • A kind of magnetically recyclable, regenerative adsorbent for tetracycline adsorption (Q max = 46.42 mg g−1) has been obtained. • The mechanisms of Fe 3 O 4 /Ti 3 C 2 adsorbing tetracycline: endothermic adsorption; the quick absorption of pollutants is facilitated by the electrostatic interactions, π−π bonds and hydrogen bonds. • The adsorption occurs over a wide pH range of 4–10. [ABSTRACT FROM AUTHOR]

[Display omitted] • Preparation of a biochar-iron oxide (BC-IO) composite via ultrasonication. • High specific surface area of BC-IO enables high heavy metal adsorption. • BC-IO outperformed unmodified BC in adsorption capacity. • BC-IO composite can be reused through adsorption and desorption. In this study, we aimed to develop an absorbent for efficient removal of heavy metals. We developed a composite (BC-IO x) using biochar (BC) obtained by carbonizing rice hull, a type of biomass, and iron(III) nitrate nonhydrate (IO). The bonding strength between BC and IO was increased through ultrasonication with high energy at 25 ℃ and a 2-h heat treatment process at 350 ℃. Brunauer-Emmett-Teller analysis showed that BC-IO x had an increased specific surface area, which was proportional to iron loading and provided an abundance of active heavy metal adsorption sites. This composite effectively removed Pb(II) and As(V). The addition of BC-IO 3 to Pb(II)-contaminated water for 120 min increased Pb(II) absorption capacity to 90.21 mg/g from 18.12 mg/g with unmodified BC. The As(V) adsorption capacity increased from 8.33 mg/g for unmodified BC to 65.34 mg/g for BC-IO 10. In addition, the potential adsorption mechanism was discussed using detailed chemical and physical analyses. The synthesis of a composite from biochar and iron oxide can inspire the cost-effective and straightforward production of heavy metal absorbents that can be utilized on a large scale. [ABSTRACT FROM AUTHOR]

We report the effective synthesis of polyaniline (PANi)-layered nitrogen-doped carbon-coated Fe 3 O 4 (FNC@PANi) nanocapsules (NCs) for electrocatalysis of oxygen evolution reaction (OER) as well as anode material for lithium (Li)-ion batteries (LIBs) via a simple hydrothermal method and oxidative polymerization technique. The prepared FNC@PANi NCs revealed a dual core-shell structure, in which an intermediate carbon layer allowed excellent electrical conduction between the Fe 3 O 4 NCs and PANi. The dual core-shell structure also allowed the Fe 3 O 4 NCs to expand freely during the Li-ion insertion/extraction and OER processes without breaking the outer layer, thus providing a high surface area (147.85 m2 g−1) and enhanced electrical conductivity. These properties facilitate the application of the dual core-shell FNC@PANi NCs as an advanced electrode material for LIBs, delivering a high reversible specific capacity of 1556.48 mAh g−1 at 0.1 A g−1, excellent rate performance (896.96 mAh g−1 at 1 A g−1), and durable cycling life (680.12 mAh g−1 at 5 A g−1 for 3000 cycles). The dual core-shell FNC@PANi NCs exhibited high electrocatalytic activity in the OER, with a small Tafel slope of 108.7 mV dec−1 owing to synergistic effects between the copious active sites of the Fe 3 O 4 NCs and the carbon core-shell structure and a modest overpotential of 219 mV at 10 mA cm−2. The electrodes showed excellent stability over 10 h, as determined by chronopotentiometry at 10 mA cm−1. The resultant dual-core-shell FNC@PANi NCs are efficient iron-oxide-based electrode materials for LIBs and OER electrocatalysts. Facile solvothermal method and chemical oxidative polymerization technique are reported for the synthesis of bifunctional electrocatalyst and high-performance LIB anode material, i.e., dual core-shell polyaniline layered nitrogen-doped carbon coated Fe 2 O 3 nanocapsules (dual core-shell FNC@PANi NCs). Compared to its counterparts, this FNC@PANi NCs electrode delivers excellent energy storage properties along with higher OER behavior. [Display omitted] • A bifunctional electrode material for lithium-ion battery (LIB) and oxygen evolution reaction (OER) electrocatalyst, namely dual core-shell FNC@PANi NCs, was synthesized via a hydrothermal method. • The material serves as an advanced LIBs electrode, exhibiting impressive cycling stability, excellent rate capability, and durable cycling life. • As an OER electrocatalyst, the FNC@PANi NCs demonstrate significant catalytic activity, evidenced by small Tafel slope and modest overpotential. [ABSTRACT FROM AUTHOR]

The respiratory effects of particulate matter (PM) in subway station platforms or tunnels have attracted considerable research attention. However, no studies have characterized the effects of subway PM on allergic immune responses. In this study, iron oxide (α-Fe 2 O 3 and Fe 3 O 4) particles—the main components of subway PM—were intratracheally administered to BALB/c mice where ovalbumin (OVA) induced allergic pulmonary inflammation. Iron oxide particles enhanced OVA-induced eosinophil recruitment around the bronchi and mucus production from airway epithelium. The concentrations of type 2 cytokines, namely, interleukin (IL)-5 and IL-13, in bronchial alveolar lavage fluids were increased by iron oxide particles. Iron oxide particles also increased the number of type 2 innate lymphoid cells and CD86+ cells in the lung. Moreover, phagocytosis of particles in lung cells was confirmed by Raman spectroscopy. In a subsequent in vitro study, bone marrow-derived antigen-presenting cells (APCs) isolated from NC/Nga mice were exposed to iron oxide particles and OVA. They were also exposed to outdoor ambient PM: Vehicle Exhaust Particulates (VEP) and Urban Aerosols (UA) as references. Iron oxide particles promoted the release of lactate dehydrogenase, C-X-C motif chemokine ligand 1 and IL-1α from APCs, which tended to be stronger than those of VEP. These results suggest that iron oxide particles enhance antigen presentation in the lungs, promoting allergic immune response in mice; iron oxide particles-induced death and inflammatory response of APCs can contribute to allergy exacerbation. Although iron oxide particles do not contain various compounds like VEP, iron oxide alone may have sufficient influence. [Display omitted] • α-Fe 2 O 3 /Fe 3 O 4 particles were used as the components of subway particulate matters. • Iron oxide particles exacerbated allergic airway inflammation in mice. • Iron oxide particle-enhanced antigen-presenting can trigger allergies. • Iron oxide particles increased type 2 innate lymphoid cells in murine lungs. • α-Fe 2 O 3 and Fe 3 O 4 were detected in lung macrophages by Raman spectroscopy. [ABSTRACT FROM AUTHOR]

Oxide materials are important for gas sensing applications. Unfortunately, most of the synthesis methods use many toxic chemicals and need long calcination at high temperatures. Thus, developing simple and green synthesis processes, which can be performed fast and at low temperatures, is imperative for both industrial manufacturers and our environment. Here, our fast and green synthesis method based on low-power laser sintering for producing FeO x (with Fe 2 O 3 as the main composition) is presented. Besides, FeO x particles were decorated on reduced graphene oxide (RGO) to form a resistive sensor. Notably, our FeO x material can reduce the response of RGO toward acidic gas (NO 2) but it enhances the RGO response toward the basic NH 3 gas. Particularly, our hybrid FeO x /RGO sensor can detect NH 3 gas at above 2 ppm under dry and humidified conditions (<85 % RH). That effect of FeO x is found due to the formation of alpha-phase Fe 2 O 3 which acts as a p-type semiconductor, which is explored and explained in the discussion section. Finally, our findings not only reveal the potential of our hybrid sensing materials for practical NH 3 sensing applications but also confirm the usefulness of laser-sintering to produce catalytic oxide materials environmentally friendly and at low cost. [Display omitted] • Fast and green production method of iron oxides (Fe 3 O 4 or Fe 2 O 3) is reported. • FeO x was directly formed on RGO resistive gas sensors via laser sintering. • p-type FeO x tuned the sensing behavior of RGO materials toward NH 3 basic gas. • The hybrid FeO x /RGO sensor can work at RT and under a wide humidity range. [ABSTRACT FROM AUTHOR]

Controlled spatial arrangements of superparamagnetic iron oxide nanoparticles (SPIONs) in complex nanostructures determine fine tuning of physico-chemical properties which, in turn, may lead to new practical applications. We report here on newly observed properties of hierarchical SPIONs nanostructure with bundle-like morphology, also known as nanobundles. Colloidal chemical processes and sol-gel synthesis were used for the synthesis of nanobundles, i.e. i) self-assembly of SPIONs into magnetic nanoparticle clusters, ii) their magnetic assembly to the nanochains, and finally iii) formation of bundle-like hierarchical nanostructure. An XRPD measurements show spinel crystal structure of maghemite/magnetite nanoparticles, EDS analysis reveals Fe, Si and O as main elements whereas SEM/TEM analysis show silica-coated magnetic nanoclusters (∼100 nm) and their hierarchical assemblies with bundle-like morphology of ∼8 μm length and ∼1 μm width. TEM analysis revealed core-shell nature of iron oxide nanoparticle clusters with their size of around 80 nm that were coated by an amorphous silica shell with thickness of ∼15 nm. The nanoclusters in the core are constructed of maghemite/magnetite nanoparticle assembly with primary iron oxide nanoparticle size about 10 nm. The magnetization M data as a function of an applied external magnetic field H were successfully fitted by the Langevin function, whence the magnetic moment μ p = 19256 μ B , and the diameter d = 9.6 nm of nanoparticles were determined. Microsized bundle-like particles are superparamagnetic, magnetically guidable and possess high transverse relaxivity of r 2 = 397.8 mM−1s−1. Magnetic properties and such high value of transverse relaxivity holds promise for nanobundles application in MRI imaging (MRI contrast agent), as nanobundles may enhance the magnetic field in their surroundings and enhance proton relaxation processes. Our nanobundles can open new opportunities in the biomedical applications, magnetic separation, photonic crystals and magnetic liquid manipulation and can be inspiration for synthesizing novel self-assembled nanoparticle structures. [ABSTRACT FROM AUTHOR]

In this study, the influence of temperature (40, 60 and 80 ∘C) and light exposure on the dissolution of ▪ particles in aqueous, oxalic acid (0.45 mol/l) is experimentally investigated. A novel experimental setup, consisting of a vessel with undistorted optical access, allows the recording of dissolving particles using a video system. During post-processing, particles are automatically identified and their size and morphology are determined. Binning particles into discrete time-steps during the reaction yields heavy-tailed distributions characterized by a single parameter estimated through a maximum-likelihood estimation of a doubly truncated power-law fit. For the first time, up to three consecutive phases could be identified during the dissolution process of iron oxide particles. The contribution of each phase to the overall dissolution process is determined by a complex interplay between particle fragmentation, different reaction mechanisms and solid product formation. The initial phase is characterized by the fragmentation of larger particles with a more complex morphology, resulting in greater surface area available for reaction. In the second phase, fragmentation is less apparent and the available particle surface area is reduced. The transition to the third phase relies primarily on the supply of short wavelength light, which leads to the formation of a solid product that can increase the tracked particle diameter. • Up to three consecutive phases during iron oxide particle dissolution. • First phase dominated by particle fragmentation leading to increasing surface area. • Second phase dominated by surface area reduction, less by particle fragmentation. • Third phase occurs only at low temperatures and short-wavelength light exposure. • The third phase is characterized by solid product formation. [ABSTRACT FROM AUTHOR]

• Reduced graphene oxide/iron oxide nanocomposites-based humidity sensors exhibit superior sensing capabilities towards varying humidity levels compared to rGO. • The rGO/Fe 2 O 3 NC humidity sensors showed enhanced sensitivity, excellent sensing response, and quick response/recovery time towards different humidity level. • The humidity sensors displayed long-term stability and excellent selectivity towards different %RH levels. For the humidity sensing, rGO/Fe 2 O 3 nanocomposites were synthesized via an ultrasonic-assisted method, utilizing Hummers' and co-precipitation techniques for rGO and Fe 2 O 3 synthesis. XRD analysis confirmed the formation of rGO and rhombohedral Fe 2 O 3 NPs, while SEM revealed varied (rough sheet-like and dense compact) morphologies. UV–VIS spectra indicated characteristic absorption peaks for rGO, Fe 2 O 3 NPs, and their NCs. In addition, FTIR spectra validated graphene oxide reduction and Fe 2 O 3 NPs/NCs formation. Humidity sensing was assessed across 40–80 % RH at varying frequencies (100 Hz-10 kHz), with 100 Hz identified as the optimal frequency due to water molecule polarization limitations at higher frequencies. The rGO/Fe 2 O 3 (70/30) NC exhibited a rapid response recovery time (5 s/10 s) and high sensitivity (2715.541 %), attributed to additional active sites provided by Fe 2 O 3 , enhancing water molecule adsorption and sensor sensitivity. The sensors demonstrated long-term stability and repeatability, showcasing promising potential for humidity sensing applications. [ABSTRACT FROM AUTHOR]

• LIC is made with C-coated iron oxide anode, heteroatom-doped porous carbon cathode. • AC800–3 cathode exhibits 154 F g−1 with 76 % retention after 10,000 cycles at 1 A g−1. • IO550 anode delivers 545 mAh g−1 with 76% capacity retention after 2000 cycles. • LIC exhibits 91 and 65 Wh kg−1 at power densities of 467 and 9350 W kg−1. • LIC retains ∼77% specific capacitance at 1 A g−1 for 5000 cycles. Lithium-ion capacitors (LICs) are promising devices to balance the space between lithium-ion batteries and supercapacitors by merging the battery-type anode and capacitor-type cathode materials in a single device. This work represents a lithium-ion capacitor containing in-situ carbon coating on mix-phase iron oxide from ferrocene as an anode and heteroatom-doping on porous carbon as the cathode. This type of cathode facilitates better wettability and a good contact area between the electrode and electrolyte, leading to a capacitance of 154 F g−1, retaining 76 % capacitance after 10,000 cycles at 1 A g−1. In contrast, the anode half-cell exhibits 545 mAh g−1 at 1 A g−1 and ∼76 % retention in capacity after 2000 cycles. This is because of nano-structuring and mix-phase iron oxide, allowing a conversion-type reaction to store Li-ions at a high rate, and carbon coating provides electronic conductivity and structural strength upon cycling. The full cell LIC demonstrates energy densities of 91 and 65 Wh kg−1 at power densities of 467 and 9350 W kg−1, respectively. This hybrid device can retain ∼77 % specific capacitance at 1 A g−1 for 5000 cycles. Furthermore, this study analyzes the practical application of LICs by evaluating impedance, self-discharge, and leakage current characteristics. [Display omitted] [ABSTRACT FROM AUTHOR]

Flexible supercapacitors (SCs) are pivotal in the development of wearable and portable electronic devices because of their exceptional power density, high charge/discharge rates, extended cycle life, lightweight, and flexibility. Graphene (G)-based macroscopic materials, such as one-dimensional fibers, two-dimensional films, and three-dimensional aerogels, exhibit a large specific surface area, low mass, excellent flexibility, and high conductivity. These properties make them highly suitable for use as flexible electrode materials in SCs. However, the low energy density of G-based materials hinders their application in certain fields. Iron oxide (Fe 2 O 3) has garnered considerable attention as a negative electrode material because of its low cost, high theoretical capacity, and environmentally friendly nature. However, its practical application is limited because of its poor cycling stability, easy agglomeration, and low electrical conductivity. The combination of G with Fe 2 O 3 to form a composite material not only addresses the issues of volume change and agglomeration associated with Fe 2 O 3 , but also establishes a robust conductive network that improves the electrochemical performance of composite electrodes. Therefore, the construction of SCs using Fe 2 O 3 /G composite electrodes has gained considerable research attention in recent years. We present a comprehensive review of the recent progress in the design of Fe 2 O 3 /G composites as electrode materials for flexible SCs. In addition, we discuss the current challenges and future prospects associated with the use of Fe 2 O 3 /G composites in flexible SCs. [Display omitted] • Recent progress in the design of iron oxide/graphene composites as electrode materials for flexible SCs is reviewed. • The fabrication methods are discussed in depth to provide insight into various development strategies. • The design strategies of iron oxide/graphene composites with different dimensions were comprehensively discussed. • Challenges in iron oxide/graphene composites-based flexible supercapacitors development were described. [ABSTRACT FROM AUTHOR]

Macroporous strong acidic resin (D001) is restricted in Pb(II) removal from water due to the interference of common environmental cations. A novel modified D001 (nFeOOH@D001) was developed by loading nanoscale α-FeOOH (nFeOOH) with a facile ethanol-dispersion-impregnation method to improve Pb(II) removal from aqueous solution. Solid-phase analysis showed that α-FeOOH of 10–100 nm was evenly loaded onto D001. The nFeOOH@D001 maintained the electrostatic adsorption ability of D001, and obtained the complexation adsorption capacity of nFeOOH. The nFeOOH@D001 therefore achieved a 20.2% higher Pb(II) removal rate of 74.5% as compared to the D001 of 54.3%. Under the competition of Ca2+ and Mg2+ ions, the nFeOOH@D001 showed better selectivity for Pb(II) through the complexation of hydroxyl and ferrite groups on nFeOOH. The pseudo-first order kinetics and Langmuir-adsorption models well fitted the Pb(II) removal data, indicating a chemistry and monolayer adsorption process. This process depended on pH and achieved a Pb(II) removal over 65% within a pH range of 3–7. During cyclic test, used nFeOOH@D001 could be refreshed with acetic acid as eluent. Spent nFeOOH@D001 could be remodified with nFeOOH by the above impregnation method after stripping iron oxides with hydrochloric acid. The regenerated nFeOOH@D001 obtained a regeneration rate of 97.6% as compared to virginal nFeOOH@D001. The results demonstrated that the introduction of nFeOOH could effectively improve the performance of D001 for Pb(II) removal from water. [Display omitted] • Nanoscale goethite-modified resin (nFeOOH@D001) was prepared with ethanol-dispersion-impregnation. • α-FeOOH of 10–100 nm on D001 provided additional adsorption sites to compensate for its occupation. • Hydroxyl and ferrite groups on nFeOOH removed Pb(II) by complexation. • nFeOOH@D001 had higher Pb(II) selectivity as compared to D001. • nFeOOH@D001 exhibited excellent stability and reusability. [ABSTRACT FROM AUTHOR]

In this study, the anodized iron oxide films with micro-nano structure were prepared by a combination of heat treatment and anodization. The adjustment of these oxide films at the micron-scale was achieved by heat treatment on substrate to modify the position of the cementite and ferrite. The distribution and existing forms of carbon on cementite and ferrite determine the morphology of their respective anodization. It was found annealing at 300 °C can improve the crystallinity of iron oxide and maintain the original micro-nano structure. Although the crystal quality of iron oxide can be further improved with higher annealing temperature, it would result in the collapse of nanoporous structures and the reconstruction of the surface morphology. Furthermore, anodized samples made from those with lamellar ferrite and cementite show better specific capacitance. The iron oxide film on the annealed substrate obtained the highest specific capacitance of 35.3 mF/cm2 at a scan rate of 20 mV/s in our samples. [ABSTRACT FROM AUTHOR]

The aim of this study is to evaluate the effect of iron oxide particle deposition on follow-up mammograms and MRI examinations of patients who underwent sentinel lymph node detection with iron oxide particles. Two hundred and eighteen patients who had sentinel lymph node biopsy (SLNB) with iron oxide particles were evaluated. Follow-up MRI and mammography were available in 36 and 69 cases respectively. MRI examinations were evaluated for ferromagnetic artifacts that were graded as follows: 0 = No artifact, 1 = Focal area, 2 = Segmental and 3 = Regional signal void artifact. Mammography artifacts were evaluated for the presence of dense particles. Pearson's chi-square test was used for statistical analyses and P < 0.05 was accepted as significant. MRI artifact grading was as follows: Grade 0: 11 (30.6%), Grade 1: 14 (38.9%), Grade 2: 3 (8.3%), and Grade 3: 8 (22.2%). The grade of artifacts differed across surgery types (P = 0.019). Grade 3 artifacts were higher in breast conserving cases whereas Grade 0 was more frequent in subcutaneous mastectomy cases. Three out of 69 (4.4%) cases who had follow-up mammography had artifacts due to iron oxide particle accumulation which presented as Grade 3 MRI artifact in all. Accumulation of iron oxide particles after SLNB with paramagnetic tracers causes artifacts on follow-up MRI examinations in half of the cases but it is significantly low in mammograms. These artifacts may be confusing in the evaluation of the images. Radiologists must be aware of these tracers and their artifacts whereas patients should be questioned for the type of SLNB before a follow-up examination. • SLNB performed with iron oxide particles may accumulate in the breast and cause troublesome artifacts in follow-up MRI examinations • Accumulating iron oxide particles that are administered in SLNB may cause artifacts in mammography mimicking malignant lesions • Breast cancer patients must be questioned for the usage of iron oxide particles in SLNB before a follow-up mammogram or MRI [ABSTRACT FROM AUTHOR]

[Display omitted] • A grain-like morphology of Fe 2 O 3 was produced by the Co-precipitation method. • Mesoporous carbon composites with iron oxide nano granular with high specific surface area and porosity for antimicrobial studies. • The as-synthesized mesoporous carbon composite with iron oxide has a potential antimicrobial activity. Bacterial infections keep posing a severe hazard to human health. Investigating efficient innovative antibacterial methods is exceedingly crucial. In this instance, coprecipitation is used to produce iron oxide and mesoporous carbon-iron oxide nanostructures with surfaces that resemble grains for antibacterial treatment. More importantly, surfaces composed of iron oxide with embedded mesoporous carbon exhibit higher bacterial consistency, which is advantageous due to the efficient interaction of bacteria with nanostructures. In antibacterial studies, nanostructures are shown to have an all-encompassing combinatorial antibacterial action against Gram-positive Bacillus cereus (B. cereus), and Staphylococcus aureus (S. aureus), and Gram-negative Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa). In the current study, a simple method to produce antibacterial agents for antibacterial applications is presented. This method involves constructing a combined formulation and morphological structure. In the successful prevention and cure of bacterial infections, iron oxide with a small quantity of mesoporous carbon has a lot of potential. [ABSTRACT FROM AUTHOR]

This work concerns research on the use of inorganic chemical compounds Fe 2 O 3 , Fe 3 O 4 , and Al and organosilicon modifiers used as additives controlling the properties of PLA for material extrusion in 3D printing technology. The addition of inorganic compounds reduces the temperature at the beginning of the composite decomposition, which is related to the presence of metal and metal oxides. An effect of inhibition of catalytic activity was also noticed as a result of the addition of organosilicon compounds. An increase in the melt flow index parameter was observed, making improving the extrusion and 3D printing process possible. The presence of inorganic additives results in a better fusion of the print paths, which leads to reduced structure defects and better interlayer adhesion. The tensile strength of the obtained composite samples decreases with the increase in the concentration of the metal and metal oxides. The addition of organosilicon substances increases the tensile strength regardless of the inorganic compound concentration. The highest increase in tensile strength was obtained for the PLA/12.5% Fe 3 O 4 /OSS-5OD-3TMOS sample and it was 24.35% compared to the sample without the addition of organosilicon compounds. The use of organosilicon additives resulted in an increase in the water contact angle. [Display omitted] [ABSTRACT FROM AUTHOR]

The study investigated removal of hexavalent chromium Cr (VI) from aqueous solution using graphene oxide‑iron oxide reinforced pectin/polyvinyl alcohol magnetic gel beads prepared through co-precipitation and freeze-drying technique. Scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, vibrating sample magnetometer, N 2 adsorption-desorption isotherm, and zeta potential are used for characterization. The surface area of magnetic gel beads calculated by BET method was determined to be 100.95 m2/g, significantly higher than that of GO and GO-Fe 3 O 4. The optimum removal efficiency of GO-Fe 3 O 4 /Pec/PVA was assessed by batch method at variables such as pH(1–6), adsorption time(0–180 min), and temperature(25–35 °C). Accordingly, 0.2 g GO-Fe 3 O 4 /Pec/PVA dose, pH 2, contact time: 120 min at 25 °C were found to be the optimal conditions, and maximum adsorption capacity of GO, GO-Fe 3 O 4 and GO-Fe 3 O 4 /Pec/PVA toward Cr(VI) removal was found to be 39.5, 62.5 and 78.55 mg g−1, respectively. Kinetic and isotherm studies indicate adsorption data follow pseudo-second-order kinetic and Langmuir isotherm models. Thermodynamic studies showed adsorption capacities of adsorbents decreased when temperature increased which indicated adsorption for Cr (VI) was an exothermic process. The activation energies were found to be 34.92, 26.57, and 35.23 KJ mol−1 for GO, GO-Fe 3 O 4 , and GO-Fe 3 O 4 /Pec/PVA, respectively, which illustrated adsorption of Cr(VI) onto the surface of adsorbents was a physical process. The beads exhibit excellent recoverability and reusability over five cycles. Overall, GO-Fe 3 O 4 /Pec/PVA demonstrates exceptional adsorption properties and can serve as an efficient, stable, less toxic, and magnetically separable adsorbent for removal of Cr(VI) from aqueous solution. • GO-Fe 3 O 4 reinforced pectin/polyvinyl alcohol magnetic gel beads prepared via co-precipitation and freeze drying. • Improved adsorption capacity of GO-Fe 3 O 4 /Pec/PVA for hexavalent chromium compared to GO and GO-Fe 3 O 4. • GO-Fe 3 O 4 /Pec/PVA demonstrated recoverability, magnetically separable and efficient adsorbent for environmental cleanup. [ABSTRACT FROM AUTHOR]

[Display omitted] • Identification and collection of raw magnetic sand from site. • Characterization of raw magnetic sand. • Synthesis of mesoporous iron oxide from the raw magnetic sand. • Characterization of synthesized mesoporous iron oxide. This paper presents the synthesis of iron oxide from natural magnetic sand that was obtained from Michika, Adamawa State, Nigeria. Characterization of the raw magnetic sand and the synthesized iron oxide was performed to investigate the effect of the synthesis method on functional groups, morphology, composition, crystallinity, acidity and surface area/pore distribution using Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy – energy dispersive X-ray (SEM – EDX), X-ray fluorescence (XRF), X-ray diffraction (XRD), BET and pyridine FTIR, respectively. The XRF analysis of the two samples revealed a significant variation in oxide composition. The raw magnetic sand had an iron oxide content of 64.69 wt%, which increased to 85.20 wt% after synthesis. Furthermore, the SEM-EDX analysis indicated a decrease in average particle size from 114.6 and 36.8 µm for the respective samples. The XRD patterns revealed that the crystallinity increased after synthesis. FTIR showed the associations of functional groups present in the sample. The wavebands in the range 550 – 630 cm−1, which correspond to the Fe – O bond, improved clearly in the synthesized iron oxide sample, particularly at 582 cm−1. The pyridine FTIR depicts that the overall acidic site is higher in the synthesized sample. The N 2 adsorption–desorption procedure shows an increased BET surface area from 9.394 m2/g (raw) to 24.851 m2/g (synthesized). Overall, the results showed that the synthesized mesoporous iron oxide exhibits properties similar to materials that have a high potential for application as catalysts in chemical processes. [ABSTRACT FROM AUTHOR]

The use of sustainable, multifunctional inks in printed electronics has great utility for various devices, particularly at soft biointerfaces. Here, we discuss the development of a multifunctional nanocomposite ink, termed PS-IO-N ink, designed for applications, principally in the field of flexible and bio-electronics. The ink combines electrically conductive properties with magnetic capabilities, offering a dual-functionality that facilitates both physical and electrical connections. The PSION ink is composed of two main components: poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), a conducting polymer with favorable biocompatibility, and iron oxide (Fe 3 O 4) nanoparticles known for their ferromagnetic properties. The ink is formulated as a stable water dispersion, making it eco-friendly and suitable for aqueous processing. Key findings include the optimization of components to balance electrical conductivity and magnetic behavior, allowing the ink to function as both a physical connector and a conductor. The addition of an adhesion promoter enhances the ink's water stability and surface adhesion. The ink's applicability is demonstrated in various scenarios, such as forming flexible circuits on substrates like paper and silk fibroin, creating temporary magnetic connections for electronic devices, and enabling stable connections to sensors for parameter monitoring. The PSION ink provides an innovative solution for flexible and bioelectronic applications, offering the potential for reversible, adaptable connections in both dry and wet environments. [Display omitted] • Discuss a multifunctional water based ink. • Stable dispersion with conductive and magnetic properties. • Can facilitate transient on/off connections. • Easily dispensed on variety of substrates as micropatterns. • Connections to sensors and other functional devices shown. [ABSTRACT FROM AUTHOR]

An in situ molten salt strategy is developed for the convenient preparation of iron oxide-supported platinum catalysts with high performance for o -xylene elimination. The high catalytic performance of the supported platinum catalysts is due to the improvement in redox ability and o -xylene activation. • Supported Pt catalyst is prepared using an in situ molten salt method. • Supported Pt catalyst exhibits high catalytic activity for o -xylene removal. • Pt loading enhances the redox ability of the supported Pt catalyst. • Pt loading improves the adsorption and activation of o -xylene. • Improvement in redox ability and o -xylene activation benefit high activity. Supported noble metal catalysts are highly effective for eliminating volatile organic compounds (VOCs). A catalyst with less noble metal loading is always desirable. Using a mixture of NaNO 3 and NaF as molten salt, Fe(NO 3) 3 and Pt(NH 3) 4 (NO 3) 2 as metal precursors, x Pt/Fe 2 O 3 catalysts (x = 0–0.3 wt%) were fabricated after calcination at 350 °C for 3 h. At space velocity of 40,000 mL/(g h), 0.22 wt% Pt/Fe 2 O 3 showed the best catalytic activity, and o -xylene could be completely oxidized into CO 2 and H 2 O at 225 °C. Furthermore, 0.22 wt% Pt/Fe 2 O 3 exhibited good stability, and high resistance to water vapor, CO 2 , and SO 2. We deduce that the excellent catalytic performance of 0.22 wt% Pt/Fe 2 O 3 was associated with the high dispersion of the Pt species and good low-temperature reducibility. The possible reaction mechanism of o -xylene oxidation over 0.22 wt% Pt/Fe 2 O 3 involved the adsorption of o -xylene molecules, partial decomposition into small organic intermediates (e.g. maleic anhydride and aliphatic carboxylate species), and total oxidation into CO 2 and H 2 O. Due to the high efficiency, good stability, low cost, and convenient preparation, the present catalysts are promising for the practical removal of VOCs. [ABSTRACT FROM AUTHOR]

ReaxFF molecular dynamics simulation has been employed to investigate the iron oxide-catalyzed supercritical water gasification (SCWG) of naphthalene (NAP), a common component of refractory polycyclic aromatic hydrocarbons. Simulation results showed that synergistic effects between SCW and iron oxide catalyst enormously promoted the degradation of NAP and the production of H 2 and CO. During the gasification process, SCW served not only as H source for H 2 generation but also as O source for CO generation and lattice oxygen recompense, while the major roles of iron oxide catalyst were to provide lattice oxygen with high hydrogen-abstraction ability, catalyze SCW to produce more active species, and weaken the C–C bonds. The effects of different parameters were subsequently revealed: increasing the use of H 2 O molecules raised H 2 and CO yields along with the lattice oxygen supplement but slowed the rate of CO generation, high hydrogen recovery was achieved at high NAP concentration accompanied by a low carbon gasification efficiency. Our simulated results further demonstrated that the deactivation of iron oxide catalyst was caused by carbon deposition, lattice oxygen exhaustion and iron loss. SCW media effectively inhibited the iron loss, while calcination in O 2 environment could successfully regenerate the iron oxide catalyst by cleaning up the carbon deposition and replenishing the lattice oxygen. Image 1 • SCW served not only as H source but also as O source. • Iron oxide provided lattice oxygen, catalyze SCW and C–C breaking. • Carbon deposition, lattice oxygen and iron loss caused catalyst deactivation. • Catalyst regeneration mechanism in O 2 environment was also revealed. [ABSTRACT FROM AUTHOR]

Development of simultaneous bacteria detection and eradication with simple, rapid, and reusable material is important in addressing bacterial contamination issues. In this study, we utilized the expression of alkaline phosphatase (ALP) from bacteria to design fluorescence ON/OFF system for bacteria detection, also using metal oxide nanoparticle for obtaining antibacterial activity and recyclability. The fluorescent-based biosensor with antibacterial activity was prepared by intercalating ALP-sensitive polymer dot (PD) containing β-cyclodextrin (β-CD) onto montmorillonite (MMT) as loading matrix via ionic exchange reaction, followed by immobilization of magnetic iron oxide (Fe 3 O 4) and NIR-responsive cesium tungsten oxide (CsWO 3). The PD-βCD-MMT/Fe 3 O 4 –CsWO 3 nanocomposite exhibited strong fluorescence intensity, which was quenched in the presence of bacterial ALP (0–1000 U/L) due to hydrolysis of p -nitrophenyl phosphate (NPP) into p -nitrophenol (NP) in the hydrophobic site of β-CD. Furthermore, the nanocomposite could detect both gram-negative Escherichia coli and gram-positive Staphylococcus aureus in the range of 101–107 CFU/mL (LOD 5.09 and 4.62 CFU/mL, respectively), and showed high antibacterial activity against bacteria by generating photothermal heat under 5 min NIR irradiation, causing damage to bacterial cells. This material also demonstrated recyclability via magnetic field exposure due to the presence of Fe 3 O 4. In addition, the fluorescence can be recovered following pH shock and re-conjugation of β-CD molecules. After 4 cycles, nanocomposite still showed stable photothermal effects and fluorescence-based bacteria detection. Thus, this reusable material offers promising approach for simultaneous bacteria detection and killing, which is simple, rapid, and effective. Image 1 • Reusable material was designed for fluorometric sensing and photothermolysis of bacteria. • The fluorescence ON/OFF sensing system was depended on the bacterial ALP activity. • The LOD of fluorescence-based bacteria detection showed below 101 CFU/mL. • Hybrid nanocomposite showed ±100% killing efficiency after 5 min NIR irradiation. • Antibacterial/bacteria sensing showed excellent performance even after 4 cycles. [ABSTRACT FROM AUTHOR]

We here couple Nb 2 O 5 with Fe 2 O 3 to form visible-light active heterojunctions. The formed heterojunctions are responsive to visible light, and more importantly, photoactive for the mineralization of refractory organic compounds upon exposure to visible light. The sensitizer, Fe 2 O 3 , is found to govern the photocatalytic activity of the heterojunction. Therefore, the local structure of the sensitizer is investigated in-depth with X-ray absorption spectroscopy, including X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). Results show that the local structure of Fe 2 O 3 is generally insensitive to the Fe 2 O 3 loading amount, as confirmed by EXAFS. The lengths of the Fe–O coordination and Fe–Fe coordination in the heterojunctions are 1.93 and 2.92 Å, respectively, which are shorter than those in bulk Fe 2 O 3. At a Fe 2 O 3 loading amount that is higher than the optimum value, trace amounts of isolated Fe 2 O 3 and bulk Fe 2 O 3 are likely formed at the heterojunction. This is unfavorable for electron-hole separation, and hence, detrimental to the photocatalytic activity. Image 1 • Heterojunctions composed of Nb 2 O 5 as host and Fe 2 O 3 as sensitizer are prepared. • The heterojunctions are visible light active for photomineralization of organics. • Local structure of the sensitizer, Fe 2 O 3 , is examined in-depth by XANES and EXAFS. • Visible light photoactivity of the heterojunctions is proposed based on light-induced IR. [ABSTRACT FROM AUTHOR]

• In operando x-ray absorption spectroscopy study of FeO x -based chemiresistive sensor. • Iron oxide (FeO x) nanoparticles are reduced in dry air with increasing temperature. • Iron oxide (FeO x) nanoparticles are reduced if exposed to trace amounts of acetone. • Response of FeO x chemiresistive sensor to acetone is reasoned by its chemisorption. Metal oxide thin films are archetypal active elements employed in chemiresistive gas sensors. Most existing metal oxide-based sensors operate at elevated temperatures; however, the sensing mechanism has generally been deduced considering the room-temperature properties of metal oxide compounds. We report an in-operando X-ray absorption spectroscopy study on a chemiresistive sensor of acetone vapours; namely, the chemical structure of iron-oxide nanoparticles (NPs) exposed to trace concentrations of acetone vapours under varying temperature conditions was examined. Our results show that the iron-oxide NPs, identified as maghemite/magnetite (γ-Fe 2 O 3 /Fe 3 O 4) compound, partially reduced with temperature. Likewise, the iron oxide NPs were partially reduced upon exposure to trace concentrations of acetone vapour (at constant temperature). The latter observation suggests that acetone molecules are chemically adsorbed on iron oxide. The chemical changes are discussed in terms of the conductive response of a consubstantial chemiresistive sensor. Acetone chemisorption requires a revision of the commonly accepted sensing mechanism based on the physical adsorption of acetone molecules. [ABSTRACT FROM AUTHOR]

Hydrogen peroxide (H 2 O 2) is a vital messenger molecule facilitating signal transmission within cellular systems. The accurate quantification of H 2 O 2 in complex environments, such as human serum, is instrumental in elucidating its diverse biological functions. In this study, we present the development of a robust electrode platform by integrating hemoglobin onto iron oxide (Fe 3 O 4) nanoparticles and reduced graphene oxide (rGO) as a conducting support for the sensitive detection of H 2 O 2 in human serum. The Fe 3 O 4 /rGO nanocomposite was synthesized via a facile single-step thermolysis reaction in the presence of oleylamine. Transmission electron microscopy (TEM) analysis revealed the formation of highly monodisperse Fe 3 O 4 nanoparticles that were uniformly dispersed over the reduced graphene surface. The rGO surface provided abundant active sites (Fe 3 O 4) for H 2 O 2 sensing. Consequently, the resulting Hb/Fe 3 O 4 @rGO modified electrode exhibited a wide linear range of H 2 O 2 concentrations from 1.5 to 2684 µM, demonstrating high sensitivity and low detection limit. Further characterization of the Hb/Fe 3 O 4 @rGO/GC electrode revealed a high surface coverage (τ = 3.0 × 10−9 mol cm−2), charge transfer coefficient (α = 0.83), and electron transfer rate constant (k s = 1.33 s−1). Subsequently, the Hb/Fe 3 O 4 @rGO/GC sensor probe was employed to analyze H 2 O 2 in real human serum samples, demonstrating excellent recovery rates ranging from 99.8 % to 104.0 %. The nanocomposite material, designed through the innovative combination of graphene oxide reduction, Fe 3 O 4 nanoparticle decoration, and oleylamine amide/amine bonding, serves as an excellent electrode material for H 2 O 2 concentration sensing. Thus, this study presents a promising platform for the future determination of H 2 O 2 biomarkers in clinical settings. [Display omitted] [ABSTRACT FROM AUTHOR]

The influence of the combination of sludge load control and iron oxide (IO) addition strategies on food waste anaerobic digestion (AD) was explored. The results showed that low sludge loads or IO addition could significantly enhance AD performance. Low sludge loads promoted substrate hydrolysis and volatile fatty acids degradation, which enhanced the biochemical methane potential (BMP) and production rate, respectively. IO addition promoted the CH 4 yield and maximum CH 4 production rate (R m) by 65.50% and 206.79%, respectively, by promoting hydrolysis and interspecies electron transfer among syntrophic microbes. Moreover, although the presence of IO could prevent the failure of AD in extremely high sludge load conditions, it could not ensure complete BMP recovery. In an IO-assisted reactor, low sludge loads decreased the methanogenic lag phase by 53.15% and increased the BMP and R m by 49.93% and 120.11%, respectively. Although adequate IO dosage could effectively improve the digester performance, excessive dosage may limit the economic benefits. Overall, the AD performance could be optimized by simultaneously controlling the sludge load and IO addition. [ABSTRACT FROM AUTHOR]

Spray pyrolysis at various temperatures was employed to produce non-crystalline and crystalline iron oxide (α-Fe 2 O 3) thin films on glass. The amorphous and crystalline characteristics of α-Fe 2 O 3 thin films were affirmed via X-ray diffraction analysis. With low deposition times (5 min) and at various substrate temperatures, iron oxide seems almost in a non-crystalline structure. As for the increase in deposition time (40 min), the crystallinity's degree was enhanced. According to Tauc's law, the direct gap energy E d for both the amorphous and the crystalline phases, were found to be 1.95 and 2.125 eV, respectively. Moreover, the indirect gap energy, E in = 1.65 and 1.71 eV were obtained for the amorphous phases and the crystalline phases, respectively. The linear and non-linear optical features of amorphous and crystalline structure were meticulously and adaptably detailed. It is observed that the behavior of the refractive index n (λ) and extinction coefficient k (λ) of the crystalline state was lower than that of the amorphous state. The real and imaginary linear dielectric constant and also the thin film quality factor were estimated for both the amorphous and crystalline states as well as the volume and surface energy loss functions for the crystalline and amorphous states. In conclusion, amorphous and crystalline α-Fe 2 O 3 nanocrystalline films improved their optical properties, making them potential candidates for multifunctional applications such as optoelectronics and spintronics electronics devices. [ABSTRACT FROM AUTHOR]

• Experiments are performed in both CSS and MSS at different water depths in coated and uncoated absorber. • Increase in water depth decreases the fresh water generation from both cases. • The fresh water produced from CSS and MSS are 3.85 and 6.03 kg/m2 respectively. • The thermal and exergy efficiencies are found as 47.67 and 4.53 % respectively using the MSS. • CPL of fresh water produced is lowered by 29.96 % than the SS using uncoated absorber. The quantity of drinkable water that is easily accessible is dwindling at an extremely quick pace. An extra degree of complication has been added to the problem as a consequence of the depletion of freshwater resources brought on by human activities. The primary objective of the present study is to enhance the rate of fresh water generation through the low-cost solar desalination unit using iron oxide as coating material using different thickness of water placed in the absorber plate. The experimental results revealed that the influence of metal oxide nanoparticle as absorber coating material improved the rate of fresh water generation by 36.08 % than the conventional solar still at a minimum thickness of water as 1 cm in the absorber. The palatable fresh water generated from the SS without any absorber coating for the thickness of water as 10, 20 and 30 mm is found to be 3.85, 3.09 and 2.90 kg/m2 respectively. However, with effective coating of the absorber plate using Fe 2 O 3 nanoparticle, the cumulative daily palatable water generated from the solar still for different thickness of water as 10, 20 and 30 mm is enhanced to about 6.03, 5.36 and 4.72 kg/m2 respectively. There is a significant enhancement of about 38.47 to 60.15 % and 1.96 to 4.53 % in the daily energy, and exergy efficiencies of the solar still using coated absorber plate in the SS respectively while compared to the SS using uncoated absorber at the lowest thickness of water in the absorber of basin. Similarly, the CPL of fresh water produced from the SS using coated absorber is lowered by 29.96 % than the SS using uncoated absorber. [Display omitted] [ABSTRACT FROM AUTHOR]

Drinking of water polluted with heavy metals is a means by which heavy metals bio accumulate in the human body. The rise in galamsey (illegal mining) activities in Ghana has resulted in heavy metal pollution in most water bodies in the country. Above the permissible limits, these metals cause health issues such as cancer, brain damage, kidney damage and other respiratory diseases. Hence, a smart solution to this menace is urgently needed. In this study, iron oxides were recovered from cupola furnace slag by magnetic separation and froth flotation. The recovered iron oxide was modified using electrospinning with the aid of polyvinyl alcohol after which it was calcined and used as adsorbent to detoxify lead and arsenic from two galamsey polluted water bodies in Obuasi, Ghana. Samples of the adsorbent were characterized using X-ray Fluorescence (XRF), X-ray Diffractometry (XRD), Fourier Transform Infrared Spectrometry (FTIR), Scanning Electron Microscopy (SEM) and Brunauer-Emmer-Teller (BET) method. The highest recovery for iron oxide using magnetic separation was 99.42% and that of froth flotation was 90.64%. The recovered iron oxide used as adsorbent was composed 53.04% iron oxide, with major phases like magnetite, hematite, goethite and quartz. Moreover, the surface functional group were determined to be Fe–O and OH. Also, the calcined nano fibres which were spherical in shape with rough surfaces had a specific surface area of 1.1331 m2/g. The contaminated and detoxified water were also analyzed using Atomic absorption Spectroscopy (AAS). Both adsorbent (beneficiated iron oxide and calcined nano fibre) performed well in the adsorption process, with the recovered iron oxide having 97.33% maximum lead removal efficiency while an 81.00% maximum removal efficiency for arsenic. The calcined nano fibre had a maximum of 99.99% removal efficiency for lead and 88.40% maximum efficiency for arsenic. Additionally, the adsorption fits the Langmuirian isotherm model better than the Freundlich model, indicating mono layer coverage. • Cupola furnace slags are rich in iron oxides and can be recovered for various application. • Magnetic separation and froth flotation were used to recover the iron oxides from the cupola furnace slag. • The recovered iron oxides (Fe 3 O 4 , α -Fe 2 O 3 , FeO 2 H and γ -Fe 2 O 3) were used for lead and arsenic adsorption. • The iron oxides achieved high removal efficiency for the heavy metals (Pb and As). [ABSTRACT FROM AUTHOR]

[Display omitted] • Pigment adsorption onto iron oxides is mainly due to electrostatic attraction. • The pigment-binding capacity is in the order of ferrihydrite > goethite > hematite. • The affinity of iron oxide towards pigment is in the sequence of AR > TA > BB. • Different mechanisms involved in pigment adsorption vary with pH values. • Pigments and Cu2+ have a mutual promotion effect on their adsorption. The knowledge about the adsorption properties of pigments onto different iron oxide minerals is still limited. The adsorption behaviors of three typical pigments, including amaranth (AR), tartrazine (TA), and brilliant blue (BB), onto three iron oxides (ferrihydrite, goethite, and hematite) were investigated. The primary mechanism of their interactions was the electrostatic attraction. The affinities of iron oxides toward any pigment were generally in the sequence of ferrihydrite > goethite > hematite (e.g., the maximum adsorption amounts (q max) of AR onto the three iron oxides were 35.5 mg/g, 11.6 mg/g, and 4.2 mg/g, respectively), which was related to the differences in physicochemical properties of minerals (e.g., specific surface area, surface hydroxyl density, and crystal structure). Interestingly, for a given iron oxide, the pigment-binding capacity of the mineral was in the order of AR > TA > BB. This effect was attributed to variations in pigment molecular sizes and electrostatic interactions between pigments and minerals. The pigment-binding capabilities of iron oxides changed as the solution pH varied. Hydrogen-bonding and electrostatic interactions were the main mechanisms below and above pH > pH PZC (pH value at zero point charge), respectively. Furthermore, adding Cu2+ facilitated pigment adsorption, mainly stemming from the surface-bridging effect. Pigments also enhanced Cu2+ adsorption onto iron oxides due to the decreasing electrostatic repulsion between Cu2+ and particles as well as the complexion between Cu2+ with pigment molecules adsorbed on mineral surfaces. The insightful information demonstrates that ubiquitous iron oxide minerals can affect the fate of pigments in natural environments. [ABSTRACT FROM AUTHOR]

Liquid lead–bismuth eutectic (LBE) is a heavy metal alloy with great potential as a coolant and spallation target material for Generation IV nuclear reactors. For LBE technology to be widely accepted as reliable, a comprehensive understanding of LBE coolant chemistry is crucial. Specifically, precise determination of chemical interactions between corrosion products and dissolved oxygen in LBE is essential. For that purpose, the thermal cycling method is used in the present research, in which a well-controlled batch of LBE is repeatedly cooled while a potentiometric oxygen sensor monitors the dissolved oxygen concentration. According to the literature, magnetite ( Fe 3 O 4 ) is confirmed to be an important oxide to describe oxygen–iron interaction in LBE. However, thermal cycling experiments indicate the presence of another oxide, besides Fe 3 O 4 , participating in LBE bulk chemistry under conditions relevant for LBE-cooled reactors (200 °C–400 °C, 1 0 − 8 wt.%– 1 0 − 5 wt.% dissolved oxygen concentration). By varying iron impurity content, nickel impurity content and cooling rate in the experiments, the oxide has been identified as hematite ( Fe 2 O 3 ). Thermodynamic equilibrium calculations show that Fe 2 O 3 formation through the reaction of Fe 3 O 4 with dissolved oxygen can explain the observed oxygen trends. As Fe 2 O 3 could form during LBE cooling, an oxygen control strategy should take into account additional oxygen consumption in the reactor cold leg. [Display omitted] • As-received liquid lead–bismuth eutectic is studied by cycling temperature. • Electrochemical oxygen sensor measures the dissolved oxygen concentration in-situ. • A new oxide is found in the bulk near the oxygen saturation limit at 200 – 400 ° C. • Addition of nickel and iron reveals the oxide is hematite forming from magnetite. • A correlation is derived to calculate the oxide's equilibrium from JANAF database. [ABSTRACT FROM AUTHOR]

Atomic-scale wear, behaving distinctly from macroscale wear, has been gaining significant scientific interest. We previously proposed a semi-empirical wear model for covalent bonding materials, which primarily describes an interfacial-bond-dominant atomic-scale wear process. To assess the model's broader applicability on other material types, herein we selected the iron oxide (Fe 2 O 3) as a representative ionic bonding material and conducted the large-scale atomistic simulations. The simulations unveiled two main atomic-scale wear mechanisms of Fe 2 O 3 : plastic deformation/cracking of nano-asperities induced by the asperity collision, and atom-by-atom attrition caused by the interfacial O–Fe bond formation. Crucially, our simulations proved effective in capturing the atom-by-atom attrition wear, thus confirming its validity for ionic materials and expanding its potential usefulness to a broader range of materials. [ABSTRACT FROM AUTHOR]

Li-rich layered cathode materials have received wide attention due to their superior Li-storage capability. However, their applications are still limited by capacity degradation and voltage decay, which is caused by the phase transition and metal dissolution during repeated cycling. In this work, iron oxide (FeO x) atomic layer deposition (ALD) was performed on Li-rich layered cathode powders in a fluidized bed reactor, followed by an annealing process to further improve their electrochemical performance. After 100 cycles of charge-discharge at 55 °C and 1C (1C = 250 mA g−1), the cathode made from particles with 40 cycles of FeO x ALD and annealing showed a 73% retention of the initial capacity (221 mAh g−1), while the electrode made from the pristine powders showed only 26% retention of the initial capacity (197 mAh g−1) at the same conditions. The enhancement of Li+ transport and cyclic stability stemmed from a stable Fe-doped spinel phase on the surface of cathode particles after ALD coating followed by annealing. A detailed post-test analysis demonstrated that the modification limited impedance growth and suppressed electrolyte degradation and metal dissolution. Image 1 • Combining ALD and annealing resulted in Fe subsurface-doping in LRNMC particles. • The Fe-doped spinel phase improved surface stability and suppressed side reactions. • The Li+ transport was improved by surface modification, resulting in a higher capacity. [ABSTRACT FROM AUTHOR]

• Iron oxide with variable quantities of Feδ+ and SO 4 2− mediated by temperatures of SO 2 mixed with O 2. • Iron oxide with surface Feδ+ (δ ≤ 2) functioning as H 2 O 2 activators to form aqueous OH. • Iron oxide with SO 4 2− functionalities converted to surface SO 4 •- via radical transfer from aqueous OH. • Iron oxide with SO 4 − species used to degrade aqueous pollutants via heterogeneous catalysis. • Iron oxide with SO 4 − species acting as recyclable crackers of aqueous contaminants. OH or SO 4 − are powerful oxidants that efficiently degrade recalcitrant contaminants. The productions of OH and SO 4 − via activation of their precursors (H 2 O 2 and Na 2 S 2 O 8), however, can be sustainable only after continuously feeding such precursors into the activators. Motivated by the advantages of SO 4 − over OH as an environmental cracker, this study highlighted a simple and proficient way to persist solid-supported SO 4 − species used to accelerate the decomposition of recalcitrants in the presence of an electric potential. While using ubiquiotous iron oxide as a platform to accomodate SO 4 −, we functionalized iron oxide surface with SO 4 2- species, which could be transformed into surface SO 4 − species via radical transfer from aqueous OH species. Specifically, a series of SO 4 2--modified iron oxide catalysts were synthesized using SO 2 and O 2 at 300–600 °C in order to vary their surface properties such as the contents of surface Fe δ+ species acting as H 2 O 2 activators to form OH, the contents of surface SO 4 2- species functioning as surface SO 4 − precursor, and the character of S O bonds innate to SO 4 2- functionalities linked to their long-term stability. In addition to the comparison of energetics between SO 4 2- functionalities and their SO 4 - analogues via computation, a kinetic assessment of reaction runs were conducted under controlled environments to gather convincing evidence that the formation of surface SO 4 − via its radical interconversion with aqueous OH was highly plausible and that surface SO 4 − would be the major decomposer of phenol (model compound of recalcitrants). In addition, 500 °C was found to be the optimized temperature to greatly populate Fe δ+ and SO 4 2- species rigidly immobilized on iron oxide surface among all temperatures studied, thereby providing the greatest activity and recyclability to degrade phenol. [ABSTRACT FROM AUTHOR]

• Iron oxide doped carbon nitride was synthesized. • Doped photocatalyst was proven better than pure carbon nitride. • Photon concentrator was fabricated by 3D printing. • Dicamba was degraded by photocatalyst/H2O2 exposure under visible light. We have synthesized iron oxide doped carbon nitride with 0.5 to 2 wt.% iron oxide and characterized by XPS, TGA, FTIR, SEM, photoluminescence spectroscopy and photoelectrochemical measurements. A herbicide, dicamba was employed as model organic pollutant for degradation in presence with the catalyst and hydrogen peroxide. A 3D printed photon concentrator with two chips on board (COB) LEDs with visible light spectra and two complex parabolic mirror surfaces was used as photo-reactor. The findings revealed that both photocurrent and degradation of dicamba were functions of light intensity and concentrator geometry. The rapid degradation of dicamba can be attributed to the holistic and individual actions of structural components of the photocatalyst. Four distinct phenomena, including photocatalytic activity of carbon nitride, quenching of electron/hole pairs and generation of additional reactive hydroxyl radicals by hydrogen peroxide, Fenton and photo-Fenton activity of iron oxide component of carbon nitride in presence of hydrogen peroxide and photocatalytic activity of iron oxide alone in conjuncture with carbon nitride can contribute to the overall photocatalytic activity of the system. Liquid Chromatography-Mass spectrometry (LCMS) analysis of the degradation products showed loss of chlorine from the aromatic ring and evidence of free radical addition reactions in the course of photocatalysis. [ABSTRACT FROM AUTHOR]

A magnetic adsorbent namely magnetic iron oxide encrusted hydrocalumite-chitosan (Fe 3 O 4 @HCCS) composite was prepared by the fabrication of magnetic iron oxide (Fe 3 O 4) particles on hydrocalumite-chitosan (HCCS) composite for fluoride sorption studies in batch mode. The prepared magnetic Fe 3 O 4 @HCCS composite possesses an enhanced defluoridation capacity (DC) of 6.8 mg/g compared to hydrocalumite (HC) which possesses the DC of 2.4 mg/g. The various physico-chemical parameters such as contact time, pH, co-existing anions, initial fluoride concentration and temperature were optimized for the maximum fluoride removal. The structural changes of the sorbent, before and after fluoride sorption were studied using FTIR and SEM with EDAX techniques. The equilibrium data was well modeled by Freundlich and Langmuir isotherms. The thermodynamic parameters revealed the feasibility, spontaneity and endothermic nature of fluoride sorption. The field performance and efficiency of Fe 3 O 4 @HCCS composite was examined with the waste-water sample collected from a fluoride endemic area of Dindigul district, Tamilnadu, India using standard protocols. [ABSTRACT FROM AUTHOR]

In this research, Fe 3 O 4 particles were magnetically manipulated to create porous scaffolds using a tri-axial nested Helmholtz coils-based freeze-casting setup. This novel setup allowed for a uniform magnetic field to be applied in any direction and for it to effectively change directions at any time. Applying a uniform low magnetic field of 7.8 mT in various directions was investigated to fabricate a variety of tailored microstructures and mechanical properties in the resultant scaffolds. It was observed that using the magnetic field aligned up to 81% of the lamellar walls and also altered the area and shape of the pores of the resultant scaffolds. This lamellar wall alignment occurred at every applied magnetic field direction due to the Fe 3 O 4 particles aligning during the freeze-casting process. As a result of this alignment, increases in the mechanical properties of up to 4.1× were observed. The results provide a novel experimental technique for the fabrication of user-defined microstructures in Fe 3 O 4 -based freeze-cast materials that provides significant advantages over previous experimental setups for magnetic freeze casting. Image 1 [ABSTRACT FROM AUTHOR]

Iron oxide (Fe 2 O 3) thin films have been prepared starting from iron chloride (FeCl 3) precursor by spray pyrolytic decomposition of FeCl 3 on an ordinary glass substrate at 450 °C. The precursor concentration (C) has been varied from 0.06 to 0.3 mol l−1 keeping the other deposition parameters fixed. The (C) effect on the structural, optical and electrical properties has been studied. The XRD analysis shows that Fe 2 O 3 thin film has a rhomboedric structure with (104) plane as preferential orientation. A degradation of crystallinity followed by a change in plan orientation from (104) to (110) has been observed, when (C) has been raised to 0.2 mol.l−1.The optical transmittance spectrum shows that T(λ) decreases at higher precursor concentration. Optical band gaps w decreased from 2.21 to 2.08 eV for direct transition and from 2.03 to 1.99 eV for indirect transition when (C) increases from 0.06 to 0.3 mol l−1. The extinction coefficient (k) and refractive index (n) were also has been estimated and studied. The films deposited with C = 0.14 mol l−1 has shown the maximum mobility of 62 cm2 V−1.s−1 at room temperature. All physical properties of Fe 2 O 3 thin films investigated in this work were strongly dependent upon the precursor concentration. The obtained results provide valuable information about structural, optical, photoluminescence and electrical properties of sprayed Fe 2 O 3 , which is a very helpful issue for better understanding and perfection of the semiconductor quality for the optoelectronic application. • Iron oxide thin films were grown successfully on glass substrate by chemical spray pyrolysis technique. • Precursor concentration effects were investigated. • Structural, optical and electrical properties were studied. [ABSTRACT FROM AUTHOR]