Search

Fault detection in analog circuits is of great importance to predict the correct operation of the circuit. For this purpose, soft computing techniques such as those based on the application of fuzzy inference systems stand out. However, given the large variability that can exist in analog circuits due to component tolerance, the initial fuzzy inference system (FIS) may not be able to accurately diagnose the different hard faults. This study presents a methodology to diagnose and detect the faults that can occur in analog circuits, which is based on the development of a FIS, starting from a specific fault situation in the analog circuit, and subsequently on the optimization of the membership functions using an evolutionary algorithm so that the adjusted FIS can classify and predict different failure situations. To this end, the application of optimization techniques based on particle swarm optimization (PSO) will be analyzed to develop a FIS capable of predicting different faults. In addition, pattern search algorithm will also be analyzed. A Sallen-Key band-pass filter and a single stage of a small-signal amplifier are used as test circuits. The proposed methodology shows that it is possible to accurately predict the faults that could arise in the circuits under study. [ABSTRACT FROM AUTHOR]

A wind turbine (WT) is an electromechanical system that often operates under a wide range of production conditions. These electrical systems are nowadays expanding rapidly, and they have considerable importance due to their efficiency as renewable energy sources. This led to proposing an innovative and efficient solution with intelligent systems to maintain and ensure the safe and stable operation of these dynamic systems. Maintenance tasks are based on the development of high-performance diagnostic tools, which consist in detecting and locating correctly and upstream the various failures affecting this wind machine. Where, the condition monitoring and supervision systems must rely on reliable fault diagnosis techniques in order to: avoid breakdowns and unscheduled shutdowns, improve their operation, and increase their energetic performances. In order to ensure adequate maintenance actions for the wind system, the purpose of this article is to propose and develop a robust and intelligent fault diagnosis structure. In this work, Kalman filters (KF) as state estimators are used to observe the output states of the sub-systems in order to generate the appropriate residuals evaluated by predetermined thresholds. Adaptive and hybrid network-based fuzzy inference systems (ANFIS) have been employed for the evaluation and classification stages of the detected faults to minimize the degradation of the wind turbine. All possible faults of wind turbine systems, sensors, and actuators are tested and investigated in all parts: pitch angle systems, drive, and generator with converter. The developed fault detection and identification structure are tested on a horizontal WT benchmark model using different scenarios and faults. The simulation results show the ability of the proposed and developed diagnostic methodology to detect the faults occurring efficiently and correctly in the machine. Thus, by using this robust diagnostic strategy, the condition monitoring system can maintain and ensure stable and safe operation to generate sufficient electrical power. [Display omitted] [ABSTRACT FROM AUTHOR]

Complex dynamics of change caused by fluctuating production conditions require an efficient use of the industrial knowledge base for condition monitoring in machine tools. Data-based AI approaches enable the detection and classification of faults like blowholes and highly rely on the quantity and quality of the available process data. Due to the findings of the state of art, the use of digitalized domain knowledge for fault diagnosis is given too little attention. Based on various knowledge-based approaches for fault diagnosis a framework is presented that enables the formalization of implicit knowledge to improve the classification quality under parallel use of existing AI-approaches. [ABSTRACT FROM AUTHOR]

The photovoltaic (PV) array is the most sensible element in PV plants, which is subject to different type of faults and defects. Thus, to keep these plants working efficiently they should be monitored and protected carefully. Some faults if they are not detected and isolated promptly they may lead to hazardous risks. The diagnosis of PV systems is widely addressed and recently machine learning (ML) and deep leaning (DL) methods drawn the attention of many researchers. Most applications of ML methods are based on the use of the I–V curves measurement, as enough information and features can be extracted from the curves, to detect and classify faults. These methods showed their capability to classify some faults, like line to line, degradation, disconnected PV modules, partial shading effect, and bypass diode faults. Another approach is based on the use of thermal or electroluminescence images of PV modules/arrays to detect and identify defects, such as hot spot, snails crack, and others. In this paper, different ML and ensemble learning (EL) methods are evaluated for fault diagnosis of PV arrays. The focus is mainly on the detection and classification of some complex faults that may affect the PV arrays, i.e., multiple faults, and faults with similar I–V curves, that are not evaluated before. The results showed the ability of the methods developed to detect faults with very good accuracy (classification rate = number of classified instances/total instances), within 99%, while the classification faults is done with an acceptable accuracy, within 81.73%. Through this study it is shown when really ML and EL methods should be used, and some recommendations, challenges and future directions in this topic are presented. [ABSTRACT FROM AUTHOR]

• A principal component analysis (PCA)-based supervised machine learning (SML) method is developed. • PCA-based SML is proposed to enhance fault detection and diagnosis (FDD) of photovoltaic (PV) systems. • The developed FDD approach uses feature extraction and selection, and fault classification tools. • The detection performance is studied using several PV system faults. • The results show good diagnosis efficiency and higher classification accuracy in PV systems. Fault detection and diagnosis (FDD) in the photovoltaic (PV) array has become a challenge due to the magnitudes of the faults, the presence of maximum power point trackers, non-linear PV characteristics, and the dependence on isolation efficiency. Thus, the aim of this paper is to develop an improved FDD technique of PV systems faults. The common FDD technique generally has two main steps: feature extraction and selection, and fault classification. Multivariate feature extraction and selection is very important for multivariate statistical systems monitoring. It can reduce the dimension of modeling data and improve the monitoring accuracy. Therefore, in the proposed FDD approach, the principal component analysis (PCA) technique is used for extracting and selecting the most relevant multivariate features and the supervised machine learning (SML) classifiers are applied for faults diagnosis. The FDD performance is established via different metrics using data extracted from different operating conditions of the grid-connected photovoltaic (GCPV) system. The obtained results confirm the feasibility and effectiveness of the proposed approaches for fault detection and diagnosis. [ABSTRACT FROM AUTHOR]

Bearing is one of the most critical parts used in rotary machines. Bearing faults break down the mechanism where it is located. Moreover, the faults may cause to malfunction by spreading to the entire system. Thus this may result in catastrophic failure eventually. Precise and decisive feature extraction from the raw vibration signal maintains to be one of the current topics explored for fault diagnosis in bearings. In this study, vibration signals are obtained from bearings which are formed with artificial faults of specific dimensions from a bearing test setup. Instead of employing traditional feature extraction methods found in the literature, a novel feature extraction method for bearing faults called one-dimensional ternary pattern (1D-TP) is applied. The proposed approach is a statistical method that uses patterns obtained from comparisons between neighbors of each value on vibration signals. The study aims to identify the size (mm) of the fault by determining the bearing part (inner ring, outer ring, ball) from which the faults in the bearings are caused. Several classification techniques were performed by using ternary patterns with RF (Random Forest), k-NN (k-nearest neighbor), SVM (Support Vector Machine), BayesNet, ANN (Artificial Neural Networks) models. As a result of analyzing the signals obtained from the experimental setup with the proposed model, 91.25% for dataset_1 (different speed), 100% for dataset_2 (fault type — inner ring, outer ring, ball) and 100% for dataset_3 (fault size (mm)) success rates are determined. • A novel approach is proposed to extraction of features from bearing signals. • One advantage is that this method uses all data points for feature extraction. • It is fast and can be use in real-time application. • High accuracies achieved for bearing fault classification. • Original data (Experimental setup of authors). [ABSTRACT FROM AUTHOR]

• A kurtogram based deep sequential model is examined for bearing fault classification. • The deep learning sequential model has a good ability to analyze the sequential data. • Analysing the kurtogram as sequential data helps in improving the performance. • Conversion of raw signal to kurtogram helps to generate good feature representations. The condition monitoring of rotating machinery has been widely accepted by the industrial system for intelligent fault diagnosis to achieve sustainability, high performance and provide safety to workers. Therefore, in recent years, artificial intelligence (AI) and signal processing (SP) methods are operated collectively for fault diagnosis. The complex and hybrid input feature set are constructed using SP methods for AI-based fault diagnosis. Thus, over the years the numbers of features in the feature space are increasing to represent the various faults as well as fault severities, and also, different feature selection techniques are operated on feature space to determine the ideal features. Consequently, it is a challenging task to design the dominant feature set for distinguishing the type of defects. Also, the requirement of a number of features is changing due to various working conditions of rotating machinery. Therefore, a new intelligent diagnosis method for fault classification build on the kurtogram and sequence models (SM) of deep learning is proposed in this paper. The kurtogram is a comprehensive tool for providing well-defined information about defects by organizing frequency domain kurtosis values in order at each level. Thus the SM analyzes the kurtogram as sequential data for fault diagnosis and hence helps to eliminate the feature selection exercise for identifying the dominant features from feature space. The proposed method has examined using two vibration datasets of bearing. The result demonstrates that the proposed method has a promising performance and achieves decent fault classification accuracy in comparison with other methods. [ABSTRACT FROM AUTHOR]

Deep learning-based incipient fault diagnostic techniques have achieved surprisingly well in wind turbines. Due to component failures, wind turbines must undergo active maintenance, substantially influencing revenue and power generation. Unfortunately, there are consistently uneven data distributions between samples with faults and those without faults, resulting in incorrect fault classification. Wind turbine fault classification has a significant data imbalance problem, compromising learning attention for majority and minority classes. Machine learning methodologies based on Generative Adversarial Networks (GAN), over-sampling, and under-sampling techniques for generating synthetic data have been widely employed to address the imbalance data problem. However, the traditional synthetic minority oversampling technique (SMOTE) accomplishes oversampling using linear interpolation between close minority class samples, which could be confusing, subpar, and indistinguishable from the majority class. This study suggests combining over and under-sampling using adaptive SMOTE and edited nearest neighbors (ASMOTE-ENN) that incorporate over-sampling with adaptive SMOTE and under-sampling with ENN to improve the quality of the generated samples. With this resampling technique, noise in an imbalanced dataset is reduced on three levels by using an adaptive nearest neighbor selection algorithm to find the nearest neighbors that are visible. Then use SMOTE to create samples that precisely fall into the minority class, and later use the ENN technique to eliminate instances that contribute to noise afterwards. Resampling data created by combining over- and under-sampling approaches to match the data distribution over all classes is the foundation of the suggested method's efficacy. A hybrid ensemble method is used for effective classification, including boosting, bagging, and stacking techniques. The original unbalanced and balanced data using the ASMOTE-ENN algorithm were classified using the proposed hybrid ensemble method. The classification results show that the proposed strategy is more accurate than a few imbalanced fault diagnosis techniques. • To gain complete knowledge, characteristics of SCADA data are obtained using data analysis. • We present the adaptive SMOTE-ENN algorithm-based data resampling technique to deal with imbalanced data. • Create a hybrid ensemble classification technique to identify faulty and no-fault events effectively. • The results demonstrate that the suggested method outperforms the most popular ML techniques. [ABSTRACT FROM AUTHOR]

Highlights • Shaded PV cells degrade the performance of PV systems. • I-V curves contain useful information for health monitoring. • Data driven method for fault diagnosis can deal with non-controlled solar irradiance. • Principal component analysis has proven its efficacy under real working conditions. Abstract Health monitoring and diagnosis of photovoltaic (PV) systems is becoming crucial to maximise the power production, increase the reliability and life service of PV power plants. Operating under faulty conditions, in particular under shading, PV plants have remarkable shape of current-voltage (I-V) characteristics in comparison to reference condition (healthy operation). Based on real electrical measurements (I-V), the present work aims to provide a very simple, robust and low cost Fault Detection and Classification (FDC) method for PV shading faults. At first, we extract the features for different experimental tests under healthy and shading conditions to build the database. The features are then analysed using Principal Component Analysis (PCA). The accuracy of the data classification into the PCA space is evaluated using the confusion matrix as a metric of class separability. The results using experimental data of a 250 Wp PV module are very promising with a successful classification rate higher than 97% with four different configurations. The method is also cost effective as it uses only electrical measurements that are already available. No additional sensors are required. [ABSTRACT FROM AUTHOR]

Residential air-conditioning systems are subject to soft faults, which can reduce their efficiency, capacity, and life expectancy, without being detected by the occupants. Early detection and diagnosis of faults could potentially be done by using machine learning (ML) on measurable features of the air-conditioner, such as refrigerant temperatures and pressures. This paper describes a novel approach to applying ML, which is to train a fault classifier using data from one system, and apply it to different systems. If this is effective, it can significantly reduce the cost of widescale application of ML fault classification. The support vector machine (SVM) algorithm was used. An additional question for practical application is whether the number of sensors required for input feature measurement can be reduced. This work also tests the feature reduction effect, in combination with applying an ML classifier trained on one system, to classify faults in two other systems. The results are disappointing, showing that fault classification is poor when the SVM classifier is trained on a different system than it is applied to. However, with additional work, this method has potential for improvement, possibly to a point where it can be a viable approach for field deployment. [ABSTRACT FROM AUTHOR]

Fault detection and diagnosis (FDD) in chemical process systems is an important tool for effective process monitoring to ensure the safety of a process. Multi-scale classification offers various advantages for monitoring chemical processes generally driven by events in different time and frequency domains. However, there are issues when dealing with highly interrelated, complex, and noisy databases with large dimensionality. Therefore, a new method for the FDD framework is proposed based on wavelet analysis, kernel Fisher discriminant analysis (KFDA), and support vector machine (SVM) classifiers. The main objective of this work was to combine the advantages of these tools to enhance the performance of the diagnosis on a chemical process system. Initially, a discrete wavelet transform (DWT) was applied to extract the dynamics of the process at different scales. The wavelet coefficients obtained during the analysis were reconstructed using the inverse discrete wavelet transform (IDWT) method, which were then fed into the KFDA to produce discriminant vectors. Finally, the discriminant vectors were used as inputs for the SVM classification task. The SVM classifiers were utilized to classify the feature sets extracted by the proposed method. The performance of the proposed multi-scale KFDA-SVM method for fault classification and diagnosis was analysed and compared using a simulated Tennessee Eastman process as a benchmark. The results showed the improvements of the proposed multiscale KFDA-SVM framework with an average 96.79% of classification accuracy over the multi-scale KFDA-GMM (84.94%), and the established independent component analysis-SVM method (95.78%) of the faults in the Tennessee Eastman process. [ABSTRACT FROM AUTHOR]

Performance of the most existing fault detection and classification methods can only be guaranteed when each of their own assumptions are met. In other words, a method works well in one condition may not perform well in another. In this paper, a new analytic hierarchy process (AHP) based fuzzy decision fusion system is proposed to tackle the fault classification problem. The AHP approach is introduced to determine the priorities of different classifiers, which are further utilized as the weights in ensemble system. Comparing to conventional equal weighted fusion system, the proposed fuzzy fusion system is able to provide more rational and convincing fault classification result. Effectiveness of the proposed fuzzy fusion system with model evaluation is verified through the Tennessee Eastman (TE) benchmark process. [ABSTRACT FROM AUTHOR]

The fault classification of chemical processes based on supervised learning generally demands for enough labeled fault samples, which represents a big challenge for practical engineering issues. In the industrial field, when capturing an appearance of process abnormities, human operators usually take account of correlations of relevant variables so as to locate process variables associated with the abnormity before further classifying or diagnosing the corresponding faults. In this context, accurate abnormity localizations can be an effective help for classifying the fault type. Nowadays, deep learning based fault classifications have been extensively studied and widely circulated in the literature. However, the existing approaches rarely concern the supporting role of abnormity locations for fault classifications. Motivated by this observation, this paper proposes a multi-task learning (MTL) based convolutional neural network (CNN) model for concurrent abnormity locations and fault classifications for chemical processes. Specifically, fault samples are labeled with both abnormal variable locations and fault categories before constructing a multi-task learning CNN classifier performing an auxiliary task, abnormity locations, and a primary task, fault classifications. In addition, dynamic task weights are assigned to facilitate task contributions. This method can enjoy effectively reducing the necessary amounts of labeled fault samples in achieving satisfactory fault classification performances. Experiments are carried out on the TE process simulation platform and an industrial coal gasification plant along with comparisons with conventional fault classification methods, verifying the effectiveness of the proposed method. • A CNN model based on multi-task learning is proposed to better adapt to fault diagnosis of chemical industrial processes. • An adaptive multitask learning algorithm is proposed to balance the multi-task training process effectively. • Abnormity locations can improve the accuracy of fault classification and the convergence of the overall network training. • Abnormity locations task branches can share tags to the primary task thus reducing the impact of insufficient fault labels. • Future potentiality: Since MTL method doesn't require architectural constraints, it can be applied to other neural networks. [ABSTRACT FROM AUTHOR]

Rolling element bearings are essential components of a wide variety of industrial machinery and the leading cause of equipment failure. The prediction of Remaining Useful Life (RUL) and fault diagnosis is an essential component of equipment diagnosis and health management. Real-time Conditional Based Monitoring (CBM) faces a significant challenge in the Internet of Things and Industrial 4.0 eras due to automatically processing enormous quantities of data. A novel three-phase architecture based on deep learning has been proposed to perform real-time monitoring. The model is end-to-end adaptive, and the data is sequentially processed. The proposed hybrid approach incorporates change-point detection, RUL prediction, and fault classification. Adaptive data pre-processing is employed in conjunction with the unsupervised CPD module, followed by a model training on bearing data deterioration to increase efficiency. The autoencoder employed for CPD is also utilized to supply additional features from the bottleneck layer to acquire an enhanced Health Index (HI). The experiments were conducted on NASA's prognosis and diagnosis datasets, and the proposed method's effectiveness was compared to other benchmark approaches. The results show that the proposed methodology can execute real-time CBM efficiently and reliably, outperforming other methods. [Display omitted] • Real-time condition-based monitoring of bearings has been proposed. • The methodology can determine RUL as well as bearing fault categorization. • The methodology is based on a three-phase architecture that is end-to-end adaptive. • For real-time monitoring, data is sequentially processed between each phase. • Improved accuracy is achieved as the methodology integrates change-point detection. [ABSTRACT FROM AUTHOR]

As part of any Prognostics and Health Management (PHM) system for the shipping industry, the determination of the current health of marine systems is fundamental. As such, diagnostic analytics is performed; a process that is typically constituted by fault detection, fault isolation, and fault identification. Although some efforts have been made to distinguish the faults and malfunctions (fault detection) that can occur in marine systems, the implementation of fault identification to provide a description of any considered fault type and its nature is still an unexplored area due to the lack of fault data. To overcome this, a methodology for the identification of anomalies in marine systems is presented in this paper. The proposed approach aims to analyse the implementation of time series imaging through the application of the first-order Markov chain in tandem with an analysis of both ResNet50V2 and Convolutional Neural Networks (CNNs) as part of the image classification task. To highlight the performance of this methodology, anomalies have been simulated considering the power parameter of a diesel generator. Results demonstrated the potential of time series imaging and image classification approaches, as the Markov-CNN achieved an accuracy of 95% when performing the fault classification task. • On-board technologies for maintenance are a critical area for enabling smart shipping. • A methodology for the identification of anomalies in marine systems is presented. • Time series imaging (Markov) and classification (ResNet50v2 and CNNs) are analysed. • The diesel generator power parameter of a tanker ship is presented as a case study. • Markov-CNN achieves an accuracy of 95% when performing the fault classification task. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) solar energy recorded an exponential growth, in worldwide scale, over the last decade. Inevitably, mature PV markets are becoming highly competitive, boosting the need for research and development (R&D) on efficiency and reliability optimization, maintenance and fault diagnosis of key components, such as the PV modules. Indeed, a significant number of studies and technical papers have been published up today, based on an extensive feedback from both laboratory and real (field) investigations of faults and advanced diagnosis applications, especially for crystalline silicon (c-Si) PV modules. Undoubtedly, such experience is of particular interest for current PV plant operators, future investors, maintenance engineers and the R&D sector of PV industry. However, up today, such research, published in the form of reports, technical papers or even books, remains mostly dispersed and unclassified. This paper represents a comprehensive effort to review and highlight recent advances, ongoing research and future prospects, as reported in the literature, on the classification of faults in c-Si PV modules and advanced diagnosis in the field, by means of the increasingly popular method of infrared thermal (IRT) imaging. In particular, the first main part of this paper, reviews the characteristics of the most common fault types of operating PV modules, in terms of electrical and thermal response. Then, the second part gives a thorough review of recently published research, as well as the state-of-the-art, in the fields of IRT-based fault diagnosis and thermal image processing. On the basis of these two individual though supplementary review parts, an overview table is presented, followed by a discussion on the future prospects and challenges, towards the understanding and diagnosis of faults and their propagation in operating PV modules. [ABSTRACT FROM AUTHOR]

• A hybrid data-scaling method combining Min-max and Box-Cox transformation was proposed. • It yields accurate fault classification for unbalanced and multi-domain data in industrial fields. • The health index evaluates classification difficulty before generating complex classification models. • Various scaling methods were compared using box plots and t-SNE for selected feature values. • Various classification models (SVM, RF, KNN, and XGBoost) were compared. Fault diagnosis of compressors in air conditioners is challenging owing to the imbalance and nonlinearity of the vibration data because of the contrasting failure modes. This study proposes a hybrid data-scaling method combining Min-Max normalization and Box-Cox transform methods. The Min-Max normalization method was employed to scale the multi-domain data with different failure modes whereas the Box-Cox transformation method transformed the nonlinear distributions of features into normal distributions, thereby rendering the classification of unbalanced and insufficient data easier. The primary features for fault diagnosis were extracted using an embedded feature extraction method and were consequently used to generate fault classification models such as support vector machine (SVM), K-nearest neighbor (KNN), random forest (RF), and extreme gradient boosting (XGBoost) to classify refrigerant deficiencies and motor demagnetization defects. The proposed hybrid data-scaling demonstrates the most accurate and robust classification performance relative to conventional data-scaling methods, regardless of the types of classification models. [ABSTRACT FROM AUTHOR]

Diagnosis aims at predicting the health status of components and systems. In photovoltaic systems, it is vital to guarantee energy production and extend the useful life of photovoltaic power plants. Multiple prediction and classification algorithms have been proposed for this purpose in the literature. The accuracy of these algorithms depends directly on the quality of the data and the features with which they are tuned or trained. In this paper, an innovative approach for predicting the health status of photovoltaic systems is proposed, which includes a feature selection stage. This approach first discriminates severely affected photovoltaic panels using basic electrical features. In a second step, it discriminates the other faulty panels using more elaborated time–frequency features and selecting the most relevant features through correlation and variance analysis. Finally, the approach predicts the health status of photovoltaic panels using a nonlinear regression method named partial least squares. This later is then combined with linear discriminant analysis and compared. The approach is validated with real current data from a photovoltaic plant composed of twelve photovoltaic panels with power between 205 and 240 Wp in three health states, namely broken glass, healthy, and big snail trails. The results obtained show that the proposed approach efficiently predicts the three health states. It determines the level of degradation of the panels, which indicates priorities to corrective and predictive maintenance actions. Furthermore, it is cost-effective since it uses only electrical measurements that are already available in standard photovoltaic data acquisition systems. Above all, the approach is generic and it can be easily extrapolated to other diagnosis problems in other domains. [ABSTRACT FROM AUTHOR]

• Review of fault location and classification methods in distribution grids. • The review includes methods developed for low-voltage grids. • The consideration of distributed generation in the available methods is studied. • The research trends of the fault diagnosis methods are presented. • Identification of research gaps and future challenges in the field of fault isolation. The evolution of the conventional power systems to smart grids has changed the way to conceive and operate them. The part of the grid evolving the most is the distribution grid where the installation of additional sensors and actuators has increased its observability and controllability. These have enabled the development of more accurate and automated processes including some critical ones such as the fault detection, isolation and restoration techniques. In this direction, unconventional methods, e.g. artificial intelligence, have been increasing in popularity over the last years. In this paper, fault location and fault classification methods are reviewed for both medium–voltage and the until recently unexplored case of low–voltage distribution grids. Different methods applied for both fault location and fault classification are being classified by the implemented technique. Such methods are explained and analyzed providing the main advantages and disadvantages of each category. Additionally, the research trends in both fields are analyzed and state–of–the–art methods from each category are thoroughly compared. Finally, the research gaps are identified. [ABSTRACT FROM AUTHOR]

Attention Mechanism has become very popular in the field of mechanical fault diagnosis in recent years and has become an important technique for scholars to study and apply. The introduction of Attention Mechanism can help models achieve efficient resource allocation, improve the remote information capture capability of models, and significantly improve the performance of models for various equipment health management tasks (fault classification, life prediction, etc.) The application of Attention Mechanism in machinery has achieved fruitful research results, but there is a lack of related reviews. In order to facilitate later scholars to quickly grasp the Attention Mechanism and select the appropriate technique, this paper reviews the relevant research and applications of Attention Mechanism in Intelligent Fault Diagnosis of Machinery. Based on the methods proposed in the collected literature, this paper classifies and analyzes them from multiple perspectives to help readers grasp the development status and trends in this field. We divide the collected technologies into three categories: Recurrent-based, Convolution-based, and Self-attention-based. We describe each attention technique and its application scenarios in detail. Finally, we summarize the advantages and disadvantages of various AM techniques, and further discuss the possible future directions of attention mechanisms in the mechanistic field. The purpose of this paper is to provide a comprehensive reference for researchers and to help them find further research directions. [ABSTRACT FROM AUTHOR]

Faults in transmission lines can cause several problems to transmission utilities. An adequate diagnosis of such events can improve service restoration time and, consequently, asset availability. This work proposes a machine learning-based approach to diagnose transmission line faults. The oscillography files of the fault case are processed and applied to four different classifiers, which must identify: phases involved, electrical nature, impedance level, and, fault cause. The method, which is inherently robust regarding signal noise and lack of synchronization between relays, combines Decision Trees, feature engineering, and optimization to perform the fault diagnosis based only on relay measures. It was tested in two fault data sets, one containing 24,000 faults generated using a Real Time Digital Simulator and another one with 46 real faults. The results obtained were very promising, with accuracy values close to 100% for involved phase and fault nature, 90% for impedance level, and 80% for fault cause. [Display omitted] • A ML approach is proposed for comprehensive fault diagnosis in transmission lines. • Fault phases, nature, impedance, and cause are inferred from oscillographs. • The approach is very robust regarding noise and lack of synchronism between relays. • It relies on very few adjustable parameters. Most internal parameters are optimized. • Results on RTDS simulated and real fault cases are provided. [ABSTRACT FROM AUTHOR]

• A novel accommodative random weighted fusion algorithm is proposed. • More feature information can be retained by using BB-1D-TP feature extraction. • A new gear fault diagnosis method is constructed with high accuracy. As an essential component of a gearbox, gears can damage a structure or even an entire gear transmission system in case of failures. As a result, advanced fault diagnosis methods are crucial to system's operation. Currently, single-signal-driven gear fault diagnosis techniques have been applied in many fields, but multipath noise and single-sensor sampling errors inevitably affected the accuracy of diagnosis. This paper proposes a gear fault diagnosis method based on a novel accommodative random weighting theory and a balanced binary one dimension ternary pattern (BB-1D-TP) model. It can accurately diagnose the types of gear failures under the circumstances of multiple channels and strong background noise. The novel accommodative random weighting algorithm reduces the total mean-square error (MSE) by adaptively adjusting the proportional connection between a measured value at a present state and a historical state. Then the balanced binary algorithm extracts texture features of fault signals for signal enhancement. In the end, the classification is done by using Support Vector Machine (SVM) method. The result of experiments demonstrated that the method in this article effectively improves accuracy and efficiency of gear fault identification. [ABSTRACT FROM AUTHOR]

Worm gearboxes (WG) are frequently used in many areas of the industry. WG is different from other gearbox types and due to their working principles they are under high risk of wear and fault. Therefore, detection of faults that may occur in WG and taking measures accordingly are especially important for systems and facilities that require uninterrupted operation. This paper introduces an intelligent feature selection and classification method for fault diagnosis of WGs under different working conditions. The novelty of the study lies in the selection of feature sources and different loading and speed conditions for condition monitoring studies of WGs experimentally. Fault detection and classification were performed based on vibration, sound and thermal images data which were acquired and processed from the healthy and the faulty WG. Apart from classical studies, time and frequency domain features and thermal images features were extracted and evaluated singularly, dual or triple forms with ANN (Artificial Neural Network) and SVM (Support Vector Machines) classifiers. Reasonable classification performances for fault detection were observed when the features of all three sources used (99.2% with ANN and 98.7% with SVM). ANN and SVM classification performances are almost equal for fault classification (98.9% with SVM and 98.6% with ANN). The findings of the study would be a possible means for online condition monitoring of industrial plants, conveyors, elevators, etc. [ABSTRACT FROM AUTHOR]

Recently, deep learning has become a popular tool for fault detection and diagnosis in chemical processes to learn complex nonlinear features. However, the features extracted from most traditional deep networks are only good representation for the raw input data, which may contain irrelevant information with the faults and are not beneficial for the fault classification task. Thus, a novel classification-driven neuron-grouped stacked autoencoder (CG-SAE) is proposed for hierarchical fault-related feature representation in this paper. During the pre-training phase of CG-SAE, the hidden neurons in each CG-AE are divided into several groups, the number of which is equal to that of the data categories. Each group is mainly associated to one type of fault. Moreover, the supervised information is introduced without additional weights by comparing the error between the actual label and the average activation of the corresponding group. In this way, the extracted deep features can contain category-related information and be clustered to different categories. In terms of the classification accuracy and training efficiency, CG-SAE performs better than some advanced supervised methods as verified by the Tennessee Eastman (TE) benchmark and an industrial hydrocracking process. [ABSTRACT FROM AUTHOR]

Many automated sound-based fault diagnosis or classification methods have been presented in the literature. A novel automatic fault diagnosis method is presented by using sounds for the cooling system of the data center. A novel feature generator and an iterative feature selector are used together to present an automated data center cooling system (DCCS) fault diagnosing method. A new feature generator is proposed inspired by knitting hence, it is called a local knit pattern (LKP). A multiple pooling based decomposition method is presented as a preprocessor. The LKP generates features from each signal. Iterative neighborhood component analysis (INCA) feature selector selects the most discriminative. Twelve classifiers are calculated in the classification phase. The selected classifiers were achieved greater than 90.0% classification accuracies, and the best-resulted classifier is Quadratic SVM. It reached 96.40% classification accuracy. Results show that new generation automated sound fault diagnosis applications can also be developed as novel sound-based fault detection applications. [ABSTRACT FROM AUTHOR]

The rapid development of photovoltaic (PV) technology and the growing number and size of PV power plants require increasingly efficient and intelligent health monitoring strategies to ensure reliable operation and high energy availability. Among the various techniques, Artificial Neural Network (ANN) has exhibited the functional capacity to perform the identification and classification of PV faults. In the present review, a systematic study on the application of ANN and hybridized ANN models for PV fault detection and diagnosis (FDD) is conducted. For each application, the targeted PV faults, the detectable faults, the type and amount of data used, the model configuration and the FDD performance are extracted, and analyzed. The main trends, challenges and prospects for the application of ANN for PV FDD are extracted and presented. • Applications of ANN techniques and hybrid application for PV FDD are summarized. • Detectable PV faults with ANN technique and diagnosis performance are investigated. • Reported public PV database of 1D data and 2D images are summarized. • Common trends for the selection of model for different PV faults are identified. • Challenges and prospects for PV FDD using ANN techniques are presented. [ABSTRACT FROM AUTHOR]

• A dimensionality reduction algorithm based on local-global balanced orthogonal discriminant projection is proposed. • A novel fault diagnosis method of rotor based on LGBODP is presented. • The vibration signals of double-span rotor systems are used to verify the effectiveness of the LGBODP algorithm. • The feasibility of the rotor fault diagnosis method based on LGBODP dimensionality reduction is verified. The rotor is the most important part of the whole rotating machinery. Whether the rotor is normal directly determines the normal operation of the whole rotating machinery. Aiming at the problem of classification difficulty caused by multi-class and high-dimensional complex characteristics of rotor fault data, a fault data set reduction method based on Local-Global Balanced Orthogonal Discriminant Projection (LGBODP) is proposed. The algorithm comprehensively considers the intra-class local information, intra-class non-local information, inter-class local information and inter-class non-local information of the data, so as to avoid the loss of structure information in the dimension reduction process. By maximizing the inter-class distance and minimizing the intra-class distance, the intrinsic manifold structure information of the fault feature data set is effectively extracted while maintaining the global feature information. First of all, the mixed feature of the rotor vibration signal was extracted from multiple angles in time domain, frequency domain and time-frequency domain, and the high-dimensional feature set was constructed. The low-dimensional fault sensitive feature subsets are extracted by the proposed LGBODP algorithm. Then, the K-nearest neighbor (KNN) method is used as a fault feature classifier to recognize different fault types of rotors. The effectiveness of the proposed algorithm is verified by the vibration signal sets of two different types of double-span rotor systems. Application examples show that this method can be used to comprehensively extract the global and local discriminant information of vibration signals of rotors and effectively diagnosis the fault of rotors. [ABSTRACT FROM AUTHOR]

Deep transfer network (DTN) has been widely used for classification tasks, which introduces maximum mean discrepancy (MMD) based loss function to extract similar latent features and reduce the discrepancy of distributions across the source and target data. However, it is a little challenging to apply deep transfer learning for fault classification tasks in industrial chemical processes, since process variables have physicochemical properties and occupy different impacts in reflecting the process status. Hence, features extracted from these process variables also have different contributions for domain adaptation in DTN. In this paper, a linear discriminant analysis (LDA)–based DTN is proposed for fault classification ofchemical processes, in which a weighted MMD is designed for domain adaptation. First, the LDA algorithm is introduced to determine how much influence each variable can distinguish samples from source and target domains. Then, a corresponding weight is assigned to each feature variable to design the weighted MMD for network transferring. A Tennessee Eastman (TE) process and a real hydrocracking process are used to validate the fault classification performance of the LDA-based DTN. The results indicate LDA-based DTN has better generalization performance and classification accuracy than traditional DTN. [ABSTRACT FROM AUTHOR]

In this paper, empirical Wavelet transform (EWT), Hilbert transform (HT) and weighted random vector functional link network (WRVFLN) are integrated for fault detection, classification, and location estimation in a series capacitor compensated double circuit transmission line (SCCDCTL). The full cycle current signals from the point of fault inception are decomposed using EWT to extract three band-limited modes (BLMs). The four efficacious instantaneous features namely energy, Shannon entropy, the standard deviation of the magnitude, and crest factor are computed from the Hilbert transformed array of the BLMs to construct the feature vector. A diagonal matrix W is computed from the zero sequence current of original six current signals as a weighting factor to categorize the ground fault accurately. Numerous faults are generated with a wide variation of the system conditions such as fault resistance, fault inception angle, fault distance, percentage compensation level, source impedance, line parameters, load angle, and inter-circuit fault in MATLAB/Simulink environments. An efficient WRVFLN computational intelligence technique is proposed to recognize and estimate the location of the faults by taking the extracted suitable feature vector with weight factor as an input. The performances of WRVFLN are compared with the recently developed advanced classifiers such as least-square support vector machine (LSSVM) and extreme learning machine (ELM) in the MATLAB interface. The lesser computational complexity, faster learning speed, superior classification accuracy, accurate fault location estimation, and short event detection time prove that the proposed EWTHT–WRVFLN method can be implemented in the real power system for online fault diagnosis. Finally, the developed system architecture is implemented on the reconfigurable digital field programmable gate array (FPGA) in ISE design suite 14.5 environments to verify the cogency of the proposed method in real-time. The feasibility of the proposed method is tested and validated by using the fast FPGA digital circuitry in a loop. • Empirical Wavelet Transform is used for series compensated lines for fault studies. • A weighted Random Vector Functional Link Network is used for fault classification and location. • A comparison with LS-SVM is presented in this paper to validate the superiority of WRVFLN. • Implementation of the WRVFLN using FPGA hardware exhibits the real-time capability of the new approach. [ABSTRACT FROM AUTHOR]