Search

The Wenchuan earthquake greatly reduced the forest water conservation capacity along the banks of Minjiang River. With the intensified soil erosion and the rapid increasing sediment transport, the sediment erosion of hydraulic turbines running on the river has become more and more serious, especially of high head Francis turbines. In this study, the k-ε multiphase flow turbulence model was used to calculate the sediment-water flow of a high head Francis turbine with long and short blades in Minjiang River. The distribution pattern of sediment concentration (sediment volume fraction) on the blade surface shows that the sediment particles mainly gather on the outlet edge at 10% of the blade height on the suction surface of the long blade, while the sediment concentration on the surface of the short blade is small. The erosion of the 0Cr13Ni5Mo runner blade was tested by the flow around erosion method, and the erosion amount on the blade surface in the severe erosion area was obtained. Based on the test data of erosion and the numerical calculation results of sediment flow, a formula to calculate the sediment erosion rate of flow passage components with 0Cr13Ni5Mo material was given for turbines operating in Minjiang River. By using this formula, the sediment erosion of flow passage components in hydraulic turbines with 0Cr13Ni5Mo or similar materials operating in Minjiang River can be predicted. [ABSTRACT FROM AUTHOR]

Water erosion, a notorious major threat to food security and ecosystem sustainability, is strongly conditioned by spatial and temporal scale effects. This paper systematically reviews the scale issues in runoff and sediment delivery (SIRSD) as a research field by integrating the traditional review approach and bibliometric analysis. This review summarises SIRSD's roots and the scale effect on runoff and sediment delivery. Then, we provide quantitative insights into the SIRSD domain's development history, thematic structure, geographic distribution, international cooperation, and methodologies. Findings show that: i) SIRSD arises from the gap between the non-linearity of runoff and sediment delivery across scales and our ability to measure it. Point-based and short-term measurements cannot capture the non-linearities from the spatio-temporal heterogeneities and cross-scale interactions of factors or processes. ii) Previous literature provides evidence that the spatial scaling of specific runoff (r), soil erosion (SE), sediment yield (SSY), or sediment delivery ratio (SDR) with drainage area (A) or slope length (L) exhibits contrasting patterns due to distinct mechanisms. Infiltration-excess and saturation-excess processes account for inverse and positive r - A relations, respectively. Interrill-erosion and rill-erosion cause inverse and positive SE-L relations. Hillslope-erosion and channel/bank-erosion explain inverse and positive SSY-A relations. Downstream increasing deposition and additional sediment inputs drive inverse and positive SDR-A relations. These scaling relationships can be nonlinear or complex due to spatial heterogeneities in land use, vegetation, topography, climate, lithology, and soil characteristics. Hence, applying an empirical scaling equation developed from the region with distinct environmental contexts is not recommended. Furthermore, the existing scaling patterns or equations may require updating given global climate and land use change. iii) SIRSD is a complex and multidisciplinary issue investigated by scientists from 93 countries since 1928. International research has substantially facilitated the understanding of SIRSD; still, more collaboration should focus on less-developed countries with high soil and water loss risks and urgent conservation needs, such as those in Africa and South America under cropland expansion. iv) Scale mismatch and scale break have discredited large-scale erosion and sediment assessments. Incorporating gully and bank erosion into modelling, extending the scale range of the L factor, and expanding the sediment scaling scope from watershed to slope may make a difference. Therefore, more research with nested design incorporating multiple scales is necessary for cross-scale analysis and scalable modelling. Addressing global climate change requires improving real-time urban flood forecasting and integrating downscaled climate models with hydrology, erosion, and sediment transport models. • A bibliometric review of the global SIRSD research for the first time. • SIRSD is rooted in the gap between natural nonlinearity and our measuring ability. • Scaling of specific runoff, erosion, sediment yield, and SDR has diverse patterns. • Scale mismatch and scale break discredit large-scale modelling and assessments. [ABSTRACT FROM AUTHOR]

Abstract The lower Amazon basin contains vast floodplains that exchange sediment with the main river. The exchange of sediment between the floodplain and the channel follows a seasonal cycle that is anticorrelated with the hydrological cycle. At low water stages, sediment that has been stored in the floodplain for potentially several thousands of years is eroded and transferred from the floodplain to the mainstem. During high water stages, most sediment transported in the main channel stems directly from the eroding source with little intermittent storage. We apply the meteoric cosmogenic 10Be to stable 9Be ratio (10Be/9Be) as a denudation and weathering proxy to investigate this seasonality in sediment transport. Single meteoric 10Be concentrations ([10Be]) have previously been shown to record floodplain storage; whereas fractions of mobilized 9Be, a trace metal released during weathering, provide degrees of weathering. The resulting 10Be/9Be ratio provides denudation rates of the sediment sources. We compare 10Be/9Be measured on suspended sediment from river depth profiles at two sites (Óbidos/Macapa) and during two hydrological seasons (high/low water stage in 2013). We show that careful construction of river depth profiles in combination with Rouse modeling is necessary to exclude the grain size dependence that together with hydrodynamic sorting introduces a bias into single [10Be] and [9Be]. In contrast, the 10Be/9Be is largely uniform across grain sizes and is thus unaffected by sorting. Our 10Be/9Be ratios, the denudation rates derived from them, and mobilized 9Be fractions do not show variations outside their uncertainties across seasons or sites. Thus, 10Be/9Be show that upstream sediment sources were well mixed by multiple cycles of storage and remobilization in the floodplain. Highlights • Meteoric cosmogenic 10Be/9Be record denudation rates of Amazon sediment sources • No seasonal variations in 10Be/9Be resolvable due to sediment mixing • Depth-integrated single 10Be show small seasonal variations due to sediment storage. • River depth integration required for single 10Be to exclude fluvial sorting bias. [ABSTRACT FROM AUTHOR]

• SWAT hydrological model has high potential in the assessment of watershed changes. • Land use changes caused by forest fires affect hydrological response of watershed. • Significant increase in surface runoff and sediment load in the post-fire scenario. • Sediment yield increased by 6.5 times with the highest fire spatial distribution. • Forest fire scenarios help to limit hydrological impacts of fire on sediment load. Forest fires profoundly affect the nature of watershed responses to precipitation, increases in runoff rate and volume, and post-fire sediment discharge. A post-fire watershed assessment to identify potential trouble spots for soil erosion and flooding can help land managers for decision-making on deploy mitigation, remediation measures, and restoration action plans. Predicting the potential impact of fires on runoff and soil erosion requires distributed hydrological modeling methods. This study used the Soil and Water Assessment Tool (SWAT), a rainfall-runoff model, to investigate the hydrological consequences of forest fires and their impact on sediment load under different burnt scenarios. For the pre-fire (baseline) scenario, the watershed is calibrated by using the measured discharge and suspended sediment concentration data from the weather station during the time step to estimate post-fire changes at the sub-catchment scale. The total water and sediment yield for the selected sub-catchment in the post-fire scenario with the highest spatial distribution of forest fire, due to the excessive surface runoff (an increase of 14.5%) increased significantly, resulted in 6.5 times increase in sediment yield. The results obtained from the study indicate a significant increase in sediment transport into the stream in the post-fire scenario. A large volume of soil losses occurred during the time step. In contrast, due to removing trees and vegetation from the ground, less evapotranspiration and infiltration occurred in selected sub-catchment areas after forest fires. In terms of watershed management, understanding the consequences of forest fires on hydrological services will be an effective method for sediment budget control. Therefore, applying the rainfall-runoff and erosion models for the watershed with developing plausible forest fire scenarios can be a productive method to deal with the threats and hydrological risks such as soil erosion and sediment transfer to the downstream environment. [ABSTRACT FROM AUTHOR]

Abstract: The tropics of northern Australia have received relatively little attention with regard to the impact of soil erosion on the many large river systems that are an important part of Australia''s water resource, especially given the high potential for erosion when long dry seasons are followed by intense wet season rain. Here we use 137Cs concentrations to determine the erosion processes supplying sediment to two major northern Australian Rivers; the Daly River (Northern Territory), and the Mitchell River (Queensland). We also present data from five sediment samples collected from a 100km reach of the Cloncurry River, a major tributary of the Flinders River (Queensland). Concentrations of 137Cs in the surface soil and subsurface (channel banks and gully) samples were used to derive ‘best fit’ probability density functions describing their distributions. These modelled distributions are then used to estimate the relative contribution of these two components to the river sediments. Our results are consistent with channel and gully erosion being the dominant source of sediment, with more than 90% of sediment transported along the main stem of these rivers originating from subsoil. We summarize the findings of similar studies on tropical Australian rivers and conclude that the primary source of sediment delivered to these systems is gully and channel bank erosion. Previously, as a result of catchment scale modelling, sheet-wash and rill erosion was considered to be the major sediment source in these rivers. Identifying the relative importance of sediment sources, as shown in this paper, will provide valuable information for land management planning in the region. This study also reinforces the importance of testing model predictions before they are used to target investment in remedial action. [Copyright &y& Elsevier]

Abstract: The ability to predict the effects of dam removal in highly sediment-filled systems is increasingly important as the number of such dam removal cases continues to grow. The cost and potential impacts of dam removal are site-specific and can vary substantially depending on local conditions. Of specific concern in sediment-impacted removals is the volume and rate of reservoir deposit erosion. The complexity and potential accuracy of modeling methods used to forecast the effects of such dam removals vary substantially. Current methods range from predictions based on simple analysis of pre-dam channel geometry to sophisticated data-intensive, three-dimensional numerical models. In the work presented here, we utilize data collected from past dam removals to develop an additional tool for predicting the rate and volume of sediment deposit erosion. Through the analysis of sediment, discharge, deposit, removal timeline, channel, and watershed data, in conjunction with post-removal monitoring data from a wide range of dam removal projects, some significant trends in the evolution of reservoir deposits following dam removal can be seen. Results indicate that parameters such as median grain size, level of cohesion, spatial variability of the deposit, and removal timeline are among the most influential factors in determining the rate and volume of sediment erosion. By comparing local conditions of dams and reservoirs slated for removal with those of past removals, we hope that predictions of the rate and volume of sediment deposit erosion can be usefully constrained. [Copyright &y& Elsevier]

Abstract: The aim of this study was to evaluate four metrics to define the spatially variable (regionalised) hillslope sediment delivery ratio (HSDR). A catchment model that accounted for gully and streambank erosion and floodplain deposition was used to isolate the effects of hillslope gross erosion and hillslope delivery from other landscape processes. The analysis was carried out at the subcatchment (~40km2) and the cell scale (400m2) in the Avon-Richardson catchment (3300km2), south-east Australia. The four landscape metrics selected for the study were based on sediment travel time, sediment transport capacity, flux connectivity, and residence time. Model configurations with spatially-constant or regionalised HSDR were calibrated against sediment yield measured at five gauging stations. The impact of using regionalised HSDR was evaluated in terms of improved model performance against measured sediment yields in a nested monitoring network, the complexity and data requirements of the metric, and the resulting spatial relationship between hillslope erosion and landscape factors in the catchment and along hillslope transects. The introduction of a regionalised HSDR generally improved model predictions of specific sediment yields at the subcatchment scale, increasing model efficiency from 0.48 to >0.6 in the best cases. However, the introduction of regionalised HSDR metrics at the cell scale did not improve model performance. The flux connectivity was the most promising metric because it showed the largest improvement in predicting specific sediment yields, was easy to implement, was scale-independent and its formulation was consistent with sedimentological connectivity concepts. These properties make the flux connectivity metric preferable for applications to catchments where climatic conditions can be considered homogeneous, i.e. in small-medium sized basins (up to approximately 3000km2 for Australian conditions, with the Avon-Richardson catchment being at the upper boundary). The residence time metric improved model assessment of sediment yields and enabled accounting for climatic variability on sediment delivery, but at the cost of greater complexity and data requirements; this metric might be more suitable for application in catchments with important climatic gradients, i.e. large basins and at the regional scale. The application of a regionalised HSDR metric did not increase data or computational requirements substantially, and is recommended to improve assessment of hillslope erosion in empirical, semi-lumped erosion modelling applications. However, more research is needed to assess the quality of spatial patterns of erosion depicted by the different landscape metrics. [Copyright &y& Elsevier]

Abstract: Cosmogenic nuclide-based denudation rates and published erosion rates from recent river gauging in the Napo River basin (Peruvian Amazonia) are used to decipher erosion and sedimentation processes along a 600 km long transect from the headwaters to the lowlands. The sediment-producing headwaters to the Napo floodplain are the volcanically active Ecuadorian Andes, which discharge sediment at a cosmogenic nuclide-based denudation rate of 0.49 ± 0.12 mm/yr. This denudation rate was calculated from an average 10Be nuclide concentration of 2.2 ± 0.5 × 104 at/g(Qz) that was measured in bedload-derived quartz. Within the Napo lowlands, a significant drop in trunk stream 10Be nuclide concentrations relative to the Andean hinterland is recorded, with an average concentration of 1.2 ± 0.5 × 104 at/g(Qz). This nuclide concentration represents a mixture between the 10Be nuclide concentration of eroded floodplain deposits, and that of sediment eroded from the Andean hinterland that is now carried in the trunk stream. Evidence for addition of sediment from the floodplain to the trunk stream is provided by published decadal-scale sediment flux measurements from gauging stations operated in the Napo basin, from which an increase from 12 × 106 t/yr at the outflow of the Andes to ∼47 × 106 t/yr at the confluence with the Solimões (upper Amazon River) is recorded. Therefore, approximately 35 × 106 t of floodplain sediment are added annually to the active Napo trunk stream. Combined with our nuclide concentration measurements, we can estimate that the eroded floodplain deposits yield a nuclide concentration of ∼0.9 × 104 at/g(Qz) only. Under steady state surface erosion conditions, this nuclide concentration would translate to a denudation rate of the floodplain of ∼0.47 mm/yr. However, we have no geomorphologic explanation for this high denudation rate within the low relief floodplain and thus suggest that this low-nuclide concentrated sediment is Andean-derived and would have been deposited in the floodplain at a time when erosion rates of the Andes were elevated. Therefore, the recently eroded floodplain sediment provides an Andean “paleo denudation rate” of 1.2 mm/yr that was calculated for high Andean production rates. A likely period for elevated erosion rates is the LGM, where climate and vegetation cover of the Andes differed from that of the Holocene. A possible cause for the erosion of the floodplain is the tectonic uplift of the Eastern Andes, which progressively shifts the Napo River northwards. Hence, the river cuts into ancient lowland sediment, which is admixed to the Andean sediment carried in the main Napo River. [Copyright &y& Elsevier]

Abstract: Pinpointing erosional ‘hot spots’ or sediment source areas within a watershed can be difficult because of the highly non-linear and episodic nature of effective runoff and sediment transport. Continuous monitoring of stream networks can provide insight into sediment source areas not possible from routine sampling by capturing episodic events and integrating entire storm events. This paper presents the results of a three-year study of spring snowmelt runoff in watersheds of Lake Tahoe, California, USA, using a network of nine nephelometric turbidometers. We estimate that montane badlands, comprising 1.2% of the Ward Creek watershed (25 km2), contributed 10–39% of snowmelt-derived suspended sediment load. The badlands are comprised of poorly-vegetated and deeply-incised gullies formed in parent material of Miocene volcanic mudflow breccia. The larger (29.5 km2) Blackwood Creek watershed also showed high relative erosion rates from volcanic terrain. Tributaries draining forested granitic and metasedimentary headwater regions had minimal sediment loads. Monitoring networks indicated that temporary main channel storage regulated release of fine sediment eroded from steep headwater slopes. This lag between erosion and delivery may lead to underestimation of gully erosion contribution to sediment budgets. [Copyright &y& Elsevier]