Search

Abstract: In this work, Li/air batteries based on nonaqueous electrolytes were investigated in ambient conditions (with an oxygen partial pressure of 0.21atm and relative humidity of ∼20%). A heat-sealable polymer membrane was used as both an oxygen-diffusion membrane and as a moisture barrier for Li/air batteries. The membrane also can minimize the evaporation of the electrolyte from the batteries. Li/air batteries with this membrane can operate in ambient conditions for more than one month with a specific energy of 362Whkg−1, based on the total weight of the battery including its packaging. Among various carbon sources used in this work, Li/air batteries using Ketjenblack (KB) carbon-based air electrodes exhibited the highest specific energy. However, KB-based air electrodes expanded significantly and absorbed much more electrolyte than electrodes made from other carbon sources. The weight distribution of a typical Li/air battery using the KB-based air electrode was dominated by the electrolyte (∼70%). Lithium metal anodes and KB-carbon account for only 5.12% and 5.78% of the battery weight, respectively. We also found that only ∼20% of the mesopore volume of the air electrode was occupied by reaction products after discharge. To further improve the specific energy of the Li/air batteries, the microstructure of the carbon electrode needs to be further improved to absorb much less electrolyte while still holding significant amounts of reaction products. [Copyright &y& Elsevier]

Highlights • X-ray photoelectron spectroscopy can provide atomistic and microscopic view of chemical speciation and distribution at complexelectrode-electrolyte interfaces. • Identifying the reactant and products of decomposition reaction can help evaluate the longevity of electrolyte and subsequent life cycle of battery. • Novelin situ XPS can provide real time view of electrode-electrolyte interphase formation and help us correlate the battery failure mechanisms. Abstract Technological development requires reliable power sources where energy storage devices are emerging as a critical component. Wide range of energy storage devices, Redox-flow batteries (RFB), Lithium ion based batteries (LIB), and Lithium-sulfur (LSB) batteries are being developed for various applications ranging from grid-scale level storage to mobile electronics. Material complexities associated with these energy storage devices with unique electrochemistry are formidable challenge which needs to be address for transformative progress in this field. X-ray photoelectron spectroscopy (XPS) - a powerful surface analysis tool - has been widely used to study these energy storage materials because of its ability to identify, quantify and image the chemical distribution of redox active species. However, accessing the deeply buried solid-electrolyte interfaces (which dictates the performance of energy storage devices) has been a challenge in XPS usage. Herein we report our recent efforts to utilize the XPS to gain deep insight about these interfaces under realistic conditions with varying electrochemistry involving RFB, LIB and LSB. [ABSTRACT FROM AUTHOR]

Abstract: To understand the limited cycle life performance and poor energy efficiency associated with rechargeable lithium–oxygen (Li–O2) batteries, the discharge products of primary Li–O2 cells at different depths of discharge (DOD) were systematically analyzed using XRD, FTIR and Ultra-high field MAS NMR. When discharged to 2.0V, the reaction products of Li–O2 cells include a small amount of Li2O2 along with Li2CO3 and RO–(C;OLi in the alkyl carbonate-based electrolyte. However, regardless of the DOD, there is no Li2O detected in the discharge products in the alkyl-carbonate electrolyte. For the first time it was revealed that in an oxygen atmosphere the high surface area carbon significantly reduces the electrochemical operation window of the electrolyte, and leads to plating of insoluble Li salts on the electrode at the end of the charging process. Therefore, the impedance of the Li–O2 cell continues to increase after each discharge and recharge process. After only a few cycles, the carbon air electrode is completely insulated by the accumulated Li salt terminating the cycling. [Copyright &y& Elsevier]