Search

This work studied the evolution of in-cylinder polycyclic aromatic hydrocarbons (PAHs) in a diesel engine fueled with n -heptane, and explored the effects of adding toluene to n -heptane on in-cylinder PAHs. In-cylinder PAHs were sampled in a direct injection diesel engine using a total cylinder sampling system. PAHs were analyzed by gas chromatography–mass spectrometry with programmed temperature vaporization in the solvent vent mode. For n -heptane, the mass of total in-cylinder PAHs ( Σ M PAHs ) increased in premixed and late diffusion combustion phases, and decreased in early diffusion and late combustion phases. Among the 16 PAHs detected, Naphthalene (Nap) was the most abundant. PAHs with two benzene rings and one five-membered ring, such as Acenaphthylene, Acenaphthene and Fluorene, were also plentiful, implying that PAHs with five-membered ring could play an important role in the growth of in-cylinder PAHs. When adding 20 vol.% toluene to n -heptane, the evolution of ΣM PAHs was varied. The Σ M PAHs for n -heptane/toluene increased in premixed and early diffusion combustion phases, and decreased in late diffusion and late combustion phases. Toluene addition reduced the ΣM PAHs in the premixed combustion phase by up to 48% but increased ΣM PAHs by 30% in the early diffusion combustion phase. In the subsequent combustion phase, the ΣM PAHs was reduced by approximately 67%. For in-cylinder individual PAHs, toluene addition generally reduced the percentages of Nap in ΣM PAHs during the engine combustion process but increased the percentages of larger PAHs, indicating that toluene addition was conducive to the growth of PAHs to form larger PAHs. [ABSTRACT FROM AUTHOR]

Highlights: [•] Reductions in CBC emissions were assessed for CFT diesel. [•] Significant reductions in emissions of total and individual CBCs were obtained. [•] The percentage reduction in the total CBCs decreased with an increase in engine load. [•] The percentage reduction in the total CBCs increased with increase in engine speed. [•] The ozone formation potential of CBCs emitted was strongly reduced with use of CFT. [ABSTRACT FROM AUTHOR]

Abstract: The diesel soot was extracted from the chamber of a running diesel engine using a total cylinder sampling system. A structural description and size distribution of the soot spherules were performed by means of high-resolution transmission electron microscopy (HRTEM). HRTEM image analysis was carried out to achieve semi-quantitative information about the soot organization. Different nanostructures were found in dependence upon the engine test conditions. A better organization of the graphitic layers occurred for the in-cylinder soot as the expansion stroke developed. The oxygen concentrations at sampling angles and the cylinder pressure were measured. The oxidation rates of the in-cylinder soot during the late combustion phase were calculated according to the differences of spherules size distributions between two consecutive sampling angles. The soot reactivity in dependence on the nanostructure was shown after deducting the effect of oxygen concentration and temperature. The increase of resistance toward oxidation was associated to the increase of the structural order for the in-cylinder soot. The results are a useful database for testing the structure–property relationship between the nanostructure and the reactivity of the in-cylinder diesel soot. [ABSTRACT FROM AUTHOR]