Search

The study of Soft X-ray emission can be a source of fundamental information, particularly for what concerns tokamaks and plasma diagnostics, but also in general in the fields of high energy and nuclear physics. Detection systems based on Gas Electron Multipliers (GEM) technology can be of particular use in the context of X-ray analyses, being relatively low cost while maintaining good spatial and temporal resolution and capability to sustain high counting rates (up to MHz/mm2). The development of these new and improved detectors is thus of interest, especially in the research about diagnostic and control of machines for fusion energy. In this work, the performance of a new triple-GEM detector, characterized by an aluminum metallic coating on both layers of the GEM foils, is presented and a comparison is made with the more conventional design employing copper coating. The performances of an aluminum-coated GEM (Al-GEM) detector and of a standard copper-coated GEM (Cu-GEM) detector in revealing quasi-monochromatic X-ray beams coming from different fluorescence materials are compared. The Al-GEM detector is shown to less suffer the issue of unwanted background on the signal caused by the presence of copper inside the detector itself. The suppression of this noise source encourages the use of Al-GEM detectors to perform spectroscopy in harsh environments, such as tokamak machines, where soft X-rays are useful probes to control different plasma properties and parameters. [ABSTRACT FROM AUTHOR]

The GEMTEQ is a gaseous detector with Gas Electron Multipliers for signal amplification and Timepix ASICS as highly pixelated readout. It is based on the GEMPix detector and designed for microdosimetry. This paper describes the vacuum chamber developed to house the three versions of the GEMTEQ and to operate the detector in sealed-mode and at low pressure. A sealed version avoiding the need of a gas system offers clear advantages for its transport and use, e.g., for measurements at a clinical particle therapy centre. Operating the detector at a pressure lower than atmospheric increases the spatial resolution, one of the key parameters in microdosimetry. A gas-tight detector housing, a pumping system, and a pressure and temperature monitoring system were developed and tested in operational conditions. These extensive tests have proven the vacuum chamber to be gas tight and well suited for the foreseen microdosimetric measurements: the GEMTEQ can be operated for several weeks at 1000 mbar without noticeable degradation of the detector signal. First measurements have been carried out successfully at pressure values as low as 200 mbar. Further tests are planned to reach the design goal of 10 mbar. Overall, the vacuum chamber fulfils the requirements for a sealed-mode and low-pressure operation of the GEMTEQ. Measurement campaigns using this setup for example for LET measurements in hadron beams have already been carried out and will be discussed in forthcoming papers. [ABSTRACT FROM AUTHOR]