Search

Water-sensitive papers (WSPs), as an artificial target, have been generally used to evaluate spray quality in pesticide applications. Though many tools were available to analyze WSPs, they were not effective in processing the presented overlapping droplets, which prevented accurate quantification of spray quality. Here, a novel methodology was proposed to analyze WSPs, focusing on the segmentation of overlapping droplets based on concave point detection and ellipse fitting. Up to 553 WSPs obtained from field trials in apple trees were used to validate this methodology. A high overall segmentation accuracy of 77.8% was achieved for the WSPs with coverage below 25%, which allowed to precisely characterize the corresponding deposition pattern. A universal linear relationship was observed between the droplet density and coverage, independent of the sprayer and canopy characteristics. In addition, the droplet size distributions for all spray applications showed a similar trend. As the proposed methodology was not effective to segment the complex overlapping spots on the WSP with high coverage (>25%), simulated WSPs were generated to estimate the deposition pattern of high coverage based on the droplet size distribution deposited on the WSPs with low coverage. A linear relationship with a much higher slope was observed between droplet density and coverage for the high deposition, which enabled an approximate estimation of the corresponding droplet density. In general, the proposed approaches allowed to obtain more accurate spray quality indicators from the WSP collectors and could be widely used for spray application evaluation to promote precision spraying. • A novel approach was proposed to analyze WSPs with the split of overlapping droplets. • A high segmentation accuracy of 77.8% was observed for the WSPs with low coverage. • A linear relationship was observed between the droplet density and spray coverage. • The applied droplet pattern showed a remarkable effect on the spray distribution. • The droplet density at high coverage was estimated based on the computer simulation. [ABSTRACT FROM AUTHOR]

Pinus taeda is a principal conifer tree species and has long been used in forest plantations in Southern Brazil. At the same time, experiments have been carried out in order to determine the wood productivity concerning the economic, social and sustainable forest management practices. In that sense, the organic fertilizers, such as the biosolid residues from pulp and paper industries, are one of the alternatives to achieve this sustainability. Nevertheless, few studies addressing this objective have been reported in Brazil. This study aimed to analyze the growth responses of loblolly pine trees treated with different doses of composted pulp-mill sludge and to propose a management guide based on a wood production simulation. A randomized block design with four replicates for every six treatments - control, 20, 40, 60, 80 and 100 t ha −1 of composted pulp-mill sludge - were carried out in an experimental plantation located in Arapoti, Paraná state, Brazil. Ten 17 year-old-trees for each treatment were selected, the stem variables were analyzed and the stand wood productivity for the optimal dosage was simulated. The trees were significantly influenced by the application of the composted pulp-mill sludge, increasing up to 24, 37 and 127% in stem diameter, height and volume, respectively, and the rotation of the pine plantation control and treated stands was 33 and 21 years, respectively. The forest management applied for a 21-year harvesting cycle (thinning at 7 and 13 years) with 84 t ha −1 of composted pulp-mill sludge resulted in a wood productivity of 11.9 m 3 ha −1 or 5.04 Mg ha −1 per year. The results confirm the potential application of pulp-mill sludge as a fertilizer to improve the wood productivity of forest plantations established in poor-nutrient sites. Also, the forest management plans, using the guide proposed, could be replicated in loblolly pine and other tree species plantations according to the end use of wood. [ABSTRACT FROM AUTHOR]

Hydrothermal treatment of sludge within the pulp and paper industry can have a wide range of possible reactor solid loads for different sludge types. The objectives of this work were to determine the effect of reactor temperature and solid load on the properties of sludge hydrochar and to simulate hydrothermal treatment of sludge within a pulp and paper mill. Laboratory experiments were first performed within reactor temperature and solid load ranges of 180–260 °C and 10–50%, respectively, and the effects of sludge treatment were determined by comparing parallel mill-scale simulations. Based on the results, both reactor temperature and solid load had a statistically significant effect on the solid, ash, carbon and energy yields of sludge hydrochar. Increasing solid load minimized carbon dissolution to the liquid phase and increased the solid and energy yield of the attained hydrochar. According to mill-scale simulations in a 9 m 3 batch reactor, treating primary sludge alone produced an energy surplus of 22–36 GJ through char incineration, decreasing to 12–22 GJ and 3.4–9.1 GJ for mixed and secondary sludge, respectively. Mixing primary and secondary sludge reduced the overall energy surplus by 2–8% compared with treating the sludge streams separately in two reactors. [ABSTRACT FROM AUTHOR]

Highlights • Paper-based thin sample layer ion transfer voltammetry was realized. • Linear scan voltammetry was chosen to investigate the electrochemical behavior. • Electrochemical behavior are compared to numerical simulation. • Background corrections can be used to eliminate undesired interference. Abstract We report here on paper-supported thin sample layer voltammetry for the determination of ions. To achieve this goal, a simple setup for the coupling of a commercially available electrode to a silver rod electrode was designed and evaluated for paper-supported thin-layer voltammetry. Linear scan ion transfer voltammetry was explored here for ion-selective membranes doped with an ionophore. The ion-transfer processes and electrochemical behaviors of the system are here evaluated and confirmed by numerical simulation. In the proof-of-concept experiments described, the ions tetrabutylammonium chloride (TBA+) and potassium (K+) were studied as model analytes at membranes without and with ionophore, respectively. A linear relationship from 0.1 mM to 1.0 mM K+ was obtained between the charge and ion concentration. The coexistence of background sodium ions did not give appreciable interference, but the background wave was not completely isolated from the analyte wave, as also confirmed by the model. The methodology was successfully demonstrated for determination of K+ in mineral water. It is anticipated that this paper-supported thin-layer detection approach may provide an attractive readout protocol for disposable paper-based analytical devices as the methodology does not place strict demands on reference electrode performance. [ABSTRACT FROM AUTHOR]

Abstract A number of problems associated with dimensional stability of paper products have to do with hygroexpansion in response to changes in humidity or moisture content. The main underlying mechanism of hygroexpansion in paper is the effect of the change of fiber cross-sections transferred through fiber bonds. In fact, the transverse expansion of fibers can be an order of magnitude greater than the longitudinal expansion. Addressing such problems using modeling on the microscale is associated with large computational costs since both the bonds and the fibers need to be resolved. We present a method for modeling the hygro or thermal expansion of interconnected fiber networks modeled with beam elements and connected through beam-to-beam contact. Being a line structure, beams can only support pointwise contact, which poses a challenge for modeling the force transfer induced by the deformation of the cross-sections at the contact point. The idea of implementing the stress transfer is to use a concurrent multiscale approach in which the bond level is resolved in detail using the configuration of the fibers and the computed strains are passed over to the beam elements. We verify and prove the applicability of this approach by comparing it with continuum models. We demonstrate the advantage of using this approach in terms of its tremendous saving in time. The use of beam models for modeling the hygro- or thermal expansion of fiber networks enables considering relevant sizes in the problems involving dimensional stability, in particular those associated with embedded inhomogeneities. We will show the applicability of the model by providing insights into published experimental observations on the hygroexpansion properties of paper products. Finally, we will demonstrate that the use of a 2D model to simulate the inter-fiber bonds in a network, not only leads to underestimation of out-of-plane deformations, but also to overestimation of the contribution of the transverse deformation of fibers to the in-plane dimensional change of the network. [ABSTRACT FROM AUTHOR]

Some errors exist in the above paper. [ABSTRACT FROM AUTHOR]

Thin-walled tubular deployable composite boom (DCB) has gained significant attention due to its lightweight, simple structure and high packaging efficiency. The experimental and numerical simulation methods were employed in this paper to investigate the folding behavior of the DCB. Using T700/epoxy unidirectional reinforced prepreg as raw material, DCB specimens were prepared by the vacuum bag method. To complete the folding experiments of DCB specimens, a folding mechanism was designed and manufactured. Folding experiments of DCB specimens were conducted and folding moment versus rotational displacement curves were measured. In addition, a Finite Element Model (FEM) was established to predict the folding behavior of the DCB. Different failure criteria were considered in the numerical analysis, including the Tsai‐Hill criterion and maximum stress criterion. Prediction results using the FEM were compared with experimental results, and both sets of results were in good agreement. It is shown that the DCB can achieve the folding function without failure. The research results in this paper are of great significance to the practical engineering application of the DCB. [Display omitted] • Six tubular deployable composite boom specimens and a precise folding mechanism were designed and prepared. • Folding experiments were conducted to measure the folding moment and rotational displacement curves. • A finite element model for predicting the folding behavior of the tubular deployable composite boom was established. [ABSTRACT FROM AUTHOR]

In this study, a computer model based on discrete element method is employed to simulate the unsteady state heat transfer from the fuser roll to the toner and coating layer during the Xerography printing of coated papers. The model coating layers consisted of randomly arranged spherical pigment and latex particles with commercially relevant size distributions. Effects of coating characteristics, toner size, multiple toner layers, toner melting energy, toner thermal conductivity, coating layer thermal conductivity, and fuser roll temperature and pressure were investigated. Iso-thermal contours of fusing time were generated to demonstrate the relative importance of different fusing conditions and toner properties. Simulation results showed that temperature variation highly depended on the toner size, toner melting energy and the fuser roll temperature. Moreover, simultaneous coupling of the compressive stress and heat transfer indicated that the pressure exerted by the fuser roll did not significantly affect the rate of heat transfer. [Copyright &y& Elsevier]

Abstract: A detailed mathematical process integration model of a pulp and paper mill in the Northern Sweden has been developed. The main objective of this work has been set to describe the practical development of the model with particular emphasis on the development of the digester and evaporation plant sub-models. Actual plant measurements have been used to validate the model. By implementing the sub-models into the complete plant model, the influence of different operation parameters on the overall plant performance has been investigated. Furthermore, introductory studies with the main objective to minimize the plant energy cost have been carried out. [Copyright &y& Elsevier]

Aramid paper honeycomb cores have been extensively used in lightweight structures. However, compressive properties of the paper, which are important for predicting the mechanical behaviors of honeycomb cores, can hardly be accurately measured due to the weak out-of-plane bending stiffness. Here, we propose an experimental method to characterize the in-plane compressive properties of the paper, in which the paper is processed into a laminate by the adhesive between layers to prevent the out-of-plane buckling. We also conducted a meso-mechanics model to analyze the compressive behavior. The compressive modulus of the hybrid paper obtained from our proposed method is basically identical to the tensile modulus, and the strength is much larger than previous estimations due to effectively avoiding the buckling. Then the compressive properties are used in numerical simulations to study the compressive properties of hybrid paper honeycombs, and the simulation calculated compressive modulus and strength agree well with experimental results, which verifies the accuracy of our method. This meso-mechanics-based characterization method can be applied to other types of paper and paper-like materials as well. • A meso-mechanics-based experimental characterization method for paper is proposed. • The method can characterize the in-plane compressive properties of paper accurately. • The tested paper properties can give a better prediction of honeycomb properties. [ABSTRACT FROM AUTHOR]

Abstract: In this paper, the prospect of integrating a combined paper&pulp mill with fuel production via biomass gasification was investigated. In the study, three different types of gasifiers (circulating fluidised bed, entrained flow and indirect gasification) and three fuel processes (dimethyl ether, methanol and Fischer-Tropsch wax synthesis) were investigated using computer simulations. The paper reports differences from the stand-alone cases and the integrated cases, using the electricity equivalence efficiency as a measure. Only 6 out of the 18 integrated cases studied displayed a positive result from integration and no obvious fuel selection that stand out as the most beneficial one, however the synthesis of dimethyl ether is, in combination with all gasifiers assessed a rather good choice, with an change in efficiency from integration ranging from −1% to 4%. Dimethyl ether is not the best choice if the electrical equivalence is to be maximised however. In this case the combination of circulating fluidised bed gasification and methanol synthesis should be pursued. The production of Fischer-Tropsch wax should according to the chosen measure not be produced; however there is an added value in the production of a non-oxygenated fuel which has not been taken into account in this particular study. All cases leads to a reduction of 0.4–0.9 kg CO2 per kg of dry biomass used in the process for fuel synthesis and the possibility to export bark is a more significant factor in this respect than which type of fuel is synthesised. [Copyright &y& Elsevier]

Paper (Maniar and Bhattacharyay, 2021) introduces a discrete random-walk (RW) model with a site dependent waiting time and an external force i.e. a site dependent drift. The RW is compared with a Smoluchowski equation in continuous space and time with space dependent diffusivity and space dependent damping. Using numerical simulations in Maniar and Bhattacharyay (2021) it is shown that the equilibrium distribution satisfies locally the Stokes–Einstein relation i.e. there is a constant temperature in the whole system. Here we show that the result can be recovered analytically with a continuous limit in the RW master equation. Moreover, we evidence that the RW model should be carefully defined in order to satisfy locally Stokes–Einstein relation, indeed a different definition of the discrete RW process describes a system that satisfies the Smoluchowski equation with constant damping, where the temperature is not uniform. [ABSTRACT FROM AUTHOR]

The future use of eddy resolving simulations (ERS) such as Large Eddy Simulation (LES), Direct Numerical Simulation (DNS) and related approaches in aerospace is explored. The turbulence modeling requirements with respect to aeroengines and aircraft is contrasted. For the latter, higher Reynolds numbers are more prevalent and this especially gives rise to the need for the hybridization of ERS methods with Reynolds Averaged Navier–Stokes (RANS) approaches. Zones where future use of pure ERS methods is now possible and those where hybridizations with RANS will be needed is outlined. The major focus is the aeroengine for which the component scales are much smaller. This gives rise to generally more benign Reynolds numbers. The use of eddy resolving methods in a wide range of zones in an aeroengine is discussed and the potential benefits and also cost drawbacks with such approaches noted. The tension when using such computationally intensive calculations in an area where the coupling of components and even the airframe and engine is becoming increasingly important is explored. Also, the numerical methods and meshing requirements are considered and the implications of ERS methods for future numerical algorithms. It is postulated that such simulations are ready now for niche uses in industry. However, to perform the scale of simulations that industry requires, to meet pressing environmental needs, challenges remain. For example, there is the need to develop optimal numerical methods that both map to the accuracy requirements for ERS and also future computer architectures. [ABSTRACT FROM AUTHOR]

The program code in the paper “Computer simulation of Talbot phenomenon using the Fresnel integrals approach” ( http://dx.doi.org/10.1016/j.ijleo.2016.01.175 ) is incompatible with MATLAB 7 and MATLAB 8. According to MATLAB documentation mfun function will be removed in a future release, besides str2double function is used. [ABSTRACT FROM AUTHOR]

Abstract: People often attribute their reluctance to study texts on screen to technology-related factors rooted in hardware or software. However, previous studies have pointed to screen inferiority in the metacognitive regulation of learning. The study examined the effects of time pressure on learning texts on screen relative to paper among undergraduates who report only moderate paper preference. In Experiment 1, test scores on screen were lower than on paper under time pressure, with no difference under free regulation. In Experiment 2 the time condition was manipulated within participants to include time pressure, free regulation, and an interrupted condition where study was unexpectedly stopped after the time allotted under time pressure. No media effects were found under the interrupted study condition, although technology-related barriers should have taken their effect also in this condition. Paper learners who preferred this learning medium improved their scores when the time constraints were known in advance. No such adaptation was found on screen regardless of the medium preference. Beyond that, paper learning was more efficient and self-assessments of knowledge were better calibrated under most conditions. The results reinforce the inferiority of self-regulation of learning on screen and argue against technology-related factors as the main reason for this. [Copyright &y& Elsevier]

This paper presents a reply to the discussion of the paper “Numerical simulation of moisture transport in concrete based on a pore size distribution model” by Q. Zeng and S.L. Xu. [ABSTRACT FROM AUTHOR]