Search

This paper reports on a study evaluating the value of a documentary as a key medium to communicate design research. We present information from the evaluation of a second screen application using video as well as a scientific paper, in order to assess how the efficacy and usefulness of using such a documentary for science communication is perceived when compared to a scientific paper. Techniques of a method called Design Documentary , developed to inspire design research teams through video, combined with science journalism were the basis of the production. Twelve researchers and students were shown the documentary and asked to read the paper in counter-balanced order. Our qualitative results show that the documentary as a complementary means of communication can bring benefits to research communication, since it delivers information the paper cannot provide. However, the fact the video is not suited for peer review might restrict its place when compared to the paper. On the overall, participants thought both formats are valuable and are complementary. [ABSTRACT FROM AUTHOR]

Different methods for measuring the friction forces are investigated in this paper. We consider the paper-on-paper contact as an example of application. We first underline several drawbacks for the two main standard methods, namely the inclined and horizontal plane methods. In particular, the horizontal plane test method often involves stick-slip oscillations that make the measurement of the friction force impossible. We then propose a method for characterizing these oscillations and removing their influence on the friction force measurement. The comparison of the proposed method to standards suggests that our proposed method delivers measurements that are much more accurate and repeatable. We finally discuss the validity of averaging the friction force measured during the sliding movement. [ABSTRACT FROM AUTHOR]

Abstract: In the present work, the analytical potential of laser induced breakdown spectroscopy (LIBS) for the discrimination of paper types and prints made by digital printers on these papers was assessed. Six different paper types (including standard office papers, color paper and non-bleached paper), and eight printers (including laser and inkjet, as well as color and black printers) were included in the study. Only one or two laser shots were delivered to each sample in order to cause minimal sample destruction and provide maximum spatial resolution. The statistical evaluation of LIBS spectra was performed by multiple methods including three comparative functions (linear correlation, sum of squared deviations and overlapping integral) as well as two advanced statistical methods (multivariate curve resolution alternating least squares (MCR-ALS) combined with classification tree and discriminant analysis (DA)). The best classification results were obtained with the newly introduced MCR-ALS/DA approach, which proved to be 96.3% accurate in the identification of the paper type and 83.3% accurate in the identification of the printer type, based on the LIBS spectrum collected from just a single laser shot to the sample. It was found that the UV part of the LIBS spectrum can be used most efficiently for the discrimination. [Copyright &y& Elsevier]

Highlights: [•] Laser cleaning of mechanical ground wood cellulose paper was compared with that of bleached softwood cellulose paper. [•] One order of magnitude of fluence range is available for cleaning without paper damage. [•] Above the destruction threshold, dehydration/dehydrogenation reactions and changes of the cellulose chain arrangement occur. [•] Contaminant particles are detached thermo-mechanically, by lateral blasting, by evaporation, or combustion. [ABSTRACT FROM AUTHOR]

Abstract: Nanopaper was prepared using ground cellulose nanofibers (GC) from canola straw and bacterial cellulose nanofibers (BC). The characteristics of GC and BC nanopapers were investigated and compared. Micropaper was also prepared from as-bleached cellulose microfibers of canola straw, used as a control sample to evaluate the effect of grinding on the properties of cellulose nanofibers and nanopaper. The average diameters for the microfiber, GC and BC were 26μm, 32nm and 45nm, respectively. Micropaper had crystallinity and crystallite size of 69% and 5.5nm, respectively. As the result of grinding, the crystallinity and crystallite size of GC nanopaper dropped to 62% and 5.1nm, respectively. BC nanopaper showed the highest values, with 80% and 6.2nm, respectively. GC nanopaper had a lower onset temperature (270°C) and thermal stability than that of both micropaper (275°C) and BC nanopaper (320°C). Micropaper was permeable to air while GC and BC nanopapers showed very high barrier property. Grinding had a drastic positive effect on mechanical properties: the tensile strength and Young''s modulus of GC nanopaper increased 11 times on average over those of micropaper, reaching 114MPa and 13.6GPa, respectively. BC nanopaper had the highest tensile strength and Young''s modulus, with 185MPa and 17.3GPa, respectively. GC and BC nanopapers are regarded as highly tough, fully bio-based, fully biodegradable and multi-performance materials. [Copyright &y& Elsevier]

Abstract: Existing laser and inkjet printers often produce adverse effects on human health, the recycling of printing paper and the environment. Therefore, this paper examines the thermogravimetry curves for printer paper, analyzes the discoloration of paper using heat-induction, and investigates the relationship between paper discoloration and the heat-inducing temperature. The mechanism of heat-induced printing is analyzed initially, and its feasibility is determined by a comparative analysis of heat-induced (laser ablation) printing and commercial printing. The innovative concept of heat-induced inkless eco-printing is proposed, in which the required text or graphics are formed on the printing paper via yellowing and blackening produced by thermal energy. This process does not require ink during the printing process; thus, it completely eliminates the aforementioned health and environmental issues. This research also contributes to related interdisciplinary research in biology, laser technology, photochemistry, nano-science, paper manufacturing and color science. [Copyright &y& Elsevier]

Abstract: A set of inks was analyzed using Py/GC/MS technique. They were prepared following some ancient Armenian recipes and then analyzed after being dried in air to obtain solid samples. A simple analytical procedure was adopted which excludes any treatment of the samples and consists in introducing the solid sample directly into the injector of the furnace pyrolyzer. Inks were also written on whatman paper by calamum and analyses of papers containing ink were carried out. A real sample analysis was reported. Comparing the pyrograms it was possible to discriminate fragments derived from ink, from that formed by the decomposition of paper by the influence of ink. In order to understand the origin of the fragments formed during the pyrolysis of inks the standard compounds used to prepare them were carried out, too. [Copyright &y& Elsevier]

Abstract: The goal of preventive conservation is to provide the correct maintenance of our cultural heritage in order to enrich our future. The Canadian Museum of Nature developed a risk model for preventive conservation that has proven useful in application to a Portuguese archive. This work applies this model to compare the magnitudes of specific risks estimated for this same archive collection when located in either of two pairs of storage rooms. These rooms are in two different parts of this building: two are in an older part and two are in a recent addition. It was, therefore, necessary to assess the building itself, both structurally and environmentally, as well as analyse its common human practices. In terms of the overall risk magnitude, the best room was found to be in the recent building and the worst in the older building. However, risks related to water problems were found to be higher in the new building. In this work cost-free measures and easy to implement recommendations are given in order to improve the quality of the storage rooms. A final comment on the method itself is also given. [Copyright &y& Elsevier]

Inorganic urban solid waste (IUSW) is a serious problem in developing countries, and IUSW in the street that does not have adequate final disposal is responsible for serious environmental effects. The aim of this work was to determine the dynamics of the generation of IUSW in the streets of two neighborhoods of different socioeconomic strata in Mexico City during 5 weeks in 2006. The amount of IUSW was recorded every day from 9:00 to 12:00h, separated, classified, and registered. It was found that plastic (50%) and paper (44.5%) wastes were found most frequently, whereas, textiles (0.4%) and glass (0.5%) wastes were present less frequently in all samples. The IUSWs without commercial brands were more abundant. Branded plastic wrappers of PepsiCo and Bimbo, as well as polyethylene terephthalate (PET) containers of Coca Cola, registered the highest values, while Gatorade, Barrilitos, and Peñafiel registered the lowest. The neighborhood with a higher income and more vegetation on sidewalks or in jardinières, which are used to hide solid waste, had more IUSW than the neighborhood with lower income, where IUSW was thrown out directly into the street. The knowledge of the real generation and composition of IUSW will contribute to the prevention of its negative environmental and social impacts, as well as guarantee the efficiency of its sustainable management. [Copyright &y& Elsevier]