Search

In this work, a photocatalytic fuel cell (PFC) with membrane electrode assembly (MEA) structure was designed for simultaneous organic compounds degradation and electricity generation. For the photoanode, the TiO 2 with the quantum-dot sensitization by CdS-ZnS was used to broaden the absorption spectrum to visible light. For the cathode, an air-breathing mode was utilized to enhance the oxygen transport. The performance of the developed PFC was evaluated under different operation conditions, including the light intensity, liquid flow rate, concentrations of electrolyte and organics. Results indicated that the designed PFC could yield good performance. The increase of the light intensity and electrolyte concentration could improve the PFC performance. It is also found that when the flow rate was increased, the PFC performance dropped down in the testing range. Too high organics concentration led to the decrease of the PFC performance. [ABSTRACT FROM AUTHOR]

In this work, a membrane electrode assembled photoelectrochemical cell (PEC) is developed for the electricity generation by degrading the organic compounds. The photocatalyst is prepared by the incorporation of mesoporous silica SBA-15 into TiO 2 and the photosensitization of CdS-ZnS to enhance the photoanode performance, while the cathode employs the air-breathing mode to enhance the oxygen transport. The experimental results show that the developed PEC exhibits good photoresponse to the illumination and the appropriate SBA-15 mass ratio in the photoanode enables the enhancement of the performance. It is also shown that the developed PEC yields better performance in the alkaline environment than that in the neutral environment. Increasing the KOH concentration can improve the cell performance. There exist optimal liquid flow rate and organics concentration leading to the best performance. Besides, it is found that increasing the light intensity can generate more electron-hole pairs and thus enhance the cell performance. These results are helpful for optimizing the design. [ABSTRACT FROM AUTHOR]