Search

Carbon paper is one of the most widely used gas diffusion layer substrate materials due to its stable performance, relatively low cost, and easy for subsequent processing. Water-soluble phenolic resin, which is more ecologically friendly than alcohol-soluble phenolic resin, was used to prepare carbon paper as the precursor of the carbon matrix. And the effect of different resin solution concentrations on the properties of carbon paper was explored. The results showed that the graphitization, electrical conductivity and mechanical properties of carbon paper increased with the increase of resin solution concentration. When the concentration of resin solution was 20 wt%, the performance of carbon paper was relatively optimal. The graphitization of the carbon paper reached 65.45%, the porosity reached 80.74%, the resistance value at 1 MPa pressure was only 7.61 mΩ cm2, the tensile strength was 1.57 MPa, and the elastic modulus was 1210.98 MPa. [ABSTRACT FROM AUTHOR]

Enzymes derived from microbial sources have gained increasing popularity in industrial applications over the past decades. Despite the high production cost, alkaline proteases have wide applications in industries such as tanneries, food production, and detergents. In recent years, there has been a shift towards utilizing natural carbon sources for cultivating microorganisms and extracting proteases in order to reduce production costs. This study aimed to investigate the biochemical and kinetic properties of protease enzymes obtained from Aspergillus niger cultivated in a paper waste medium and compare with the enzyme produced in a basal medium. Glucose is a more favorable carbon source compared to cellulose, so paper waste was pretreated with cellulose-degrading bacteria to convert cellulose into smaller carbohydrates. After the growth of A. niger in basal and combinational media, the enzymatic properties were compared between the extracted enzymes by using casein as substrate. The results demonstrated that A. niger could produce protease enzymes in the paper waste medium similar to the basal medium with more than 5-fold cost saving. The specific activity of the enzymes isolated from the basal and paper waste media was calculated to be 184.95 ± 10.56 U ml−1 and 169.88 ± 11.05 U ml−1, respectively. Carbon sources did not affect the optimum pH and temperature of the protease enzyme, which were found to be 8 and 37 °C, respectively. This study provides valuable insights into the production of alkaline protease from A. niger using a combinational medium (paper waste pretreated by cellulose-degrading bacteria), offering a cost-effective approach for industrial applications. [ABSTRACT FROM AUTHOR]

Despite incredible growth in systems of care and rapidly expanding therapeutic options for people with inflammatory bowel disease, there are significant barriers that prevent patients from benefiting from these advances. These barriers include restrictions in the form of prior authorization, step therapy, and prescription drug coverage. Furthermore, inadequate use of multidisciplinary care and inflammatory bowel disease specialists limits patient access to high-quality care, particularly for medically vulnerable populations. However, there are opportunities to improve access to high-quality, patient-centered care. This position statement outlines the policy and advocacy goals that the American Gastroenterological Association will prioritize for collaborative efforts with patients, providers, and payors. [ABSTRACT FROM AUTHOR]

Bibliometric analysis of highly cited papers facilitates researchers in formulating strategic research possibilities and addressing gaps in specific domains. In this context, a bibliometric analysis was conducted to identify published papers on "oral mucosal lesions in COVID-19" within medical literature. A comprehensive search was performed in the Scopus database in July 2023. Relevant articles were retrieved, reviewed, and data for the bibliometric analysis was recorded. Network visualization of authors, countries, and keywords was generated using VOSviewer software. The analyzed articles were published over the last three years, from 2020 to 2023, with the highest output observed in 2021. The citation count for individual papers ranged from 1 to 340, with a mean of 22.325 ± 58.93 citations. A total of 37 journals were involved in publishing papers on this topic, and five authors each contributed three papers. Notably, Brazil made the highest number of contributions with eight papers. Among the 40 papers, 19 were review papers and 16 were articles discussing various aspects of oral mucosal lesions in COVID-19 patients. Additionally, six papers were identified as systematic reviews, designated with a high level of evidence. This study presents a comprehensive bibliometric analysis of papers published on "oral mucosal lesions in COVID-19." The findings will assist researchers in identifying impactful papers, understanding the prevailing research trends, and guiding future research directions in this domain. The insights gained from this analysis can contribute significantly to advancing knowledge and improving patient care in this critical area of study. • First comprehensive bibliometric analysis on "oral mucosal lesions in COVID-19" in medical literature. • Offers valuable insights to researchers for strategic planning and further exploration in this domain. • Thoroughly examined articles from 2020 to 2023, with a peak in output observed in 2021. • Six systematic reviews among 40 papers, indicating high-quality evidence-based studies. • Brazil emerged as the top contributor with eight papers on the subject. [ABSTRACT FROM AUTHOR]

In recent years, the research pertaining to speech recognition technology in the Kazakh language has gained significant importance. This is due to the increasing demand for natural language processing applications in the region where Kazakh is predominantly spoken. Thus, there exists an urgent requirement for precise and dependable speech recognition systems. The research study examines the application of sophisticated deep learning methodologies, such as Natural Language Processing (NLP) and Hidden Markov Model (HMM), in facilitating speech recognition for the Kazakh language. Additionally, the investigation delves into how various techniques, including data preprocessing, acoustic modeling, and language modeling, can aid in devising effective speech recognition systems. The article deliberates on the feasible uses of speech recognition technology in the geographic area where Kazakh language is spoken and outlines its future research prospects. The investigation underscores the significance of persistent inquiry in this realm to confront distinctive obstacles encountered in creating speech recognition systems for languages with restricted resources. [ABSTRACT FROM AUTHOR]

To solve the durability problem caused by carbon corrosion in the porous carbon paper gas diffusion layer (GDL) of proton exchange membrane fuel cell (PEMFC), a Cr 7 C 3 ceramic coating on porous carbon paper by molten salt method was prepared. The obtained Cr 7 C 3 coating is dense and shows good adherent with the carbon paper. Based on the corrosion resistance testes, it is concluded that the Cr 7 C 3 coated carbon paper can keep high chemical stability in the long-time acid immersion accelerated corrosion tests and simulated cathodic proton exchange membrane fuel cells environment. The carbon paper with Cr 7 C 3 coating shows a small current density with a value of about 1.1 × 10−5 A cm−2 in the potentiostatic polarization test under 1 M H 2 SO 4 + 2 ppm HF at 70 °C and1.4 V SCE for 72 h. Meanwhile, the resistivity of carbon paper with Cr 7 C 3 coating prepared is 30% lower than that of pure carbon paper, and the conductivity is 1.5 times that of pure carbon paper. [ABSTRACT FROM AUTHOR]

This paper reflects the research to design and application the complex method to evaluate the quality of the paper written in the IMRaD format. As a field we choose Russian segment of the financial technologies area since we had interest to use multilingual language model. The method covers paper's relevance to the chosen field and internal topics, the actuality, relation between parts, text borrowing, and experiment part. The clustering and classifying algorithms, and language machine learning model were used. The experimental part based on corpus of Russian papers shows the deviation of method's recommendations from expert opinion not more than 20%. The results may be interested not only reviewers but student as authors of futures papers to avoid common mistakes during paper's writing. [ABSTRACT FROM AUTHOR]

With the development of computer technology, automatic test paper generation systems have gradually become an effective tool for detecting and maintaining national machine security and protecting the rights and interests of workers. This article achieved multi-level oral scores for different types of questions through online scoring using artificial neural networks in recent years. Based on its specific situation and evaluation index requirements, an analysis module that is reasonable, efficient, and in line with the hierarchical structure and module requirements of national conditions has been designed to complete the research on automatic test paper generation technology, in order to help better manage and allocate human resources and improve production efficiency. Afterwards, this article conducted functional testing on the technical module. The test results showed that the scalability of the system was over 82%. [ABSTRACT FROM AUTHOR]

Ni-doped WC/Mo 2 C composites for hydrogen evolution reaction (HER) were synthesized in situ grown on carbon fiber paper (CFP) by molten salt method in argon at 1000 °C for 6 h, named as Ni-xWC-y/2Mo 2 C@CFP. The effects of different W/Mo molar ratios (3:1, 2:1, 1:1, 1:2, 1:3) on the phase composition, microstructures, and HER performances were investigated. The results showed that the W/Mo molar ratio had a synergistic effect in HER of Ni-doped WC/Mo 2 C composites, and as W/Mo molar ratio at 1:1, the composite presented the best electrocatalytic activity. Meanwhile, its surface appeared to have a wrinkle-like structure, and the biphasic heterostructure emerged at the intersection of the dual-phase WC and Mo 2 C lattices. The introduction of a biphasic heterostructure could promote charge transfer and improve HER efficiency. Predictably, the electrocatalysts with the optimal W/Mo molar ratio 1:1 exhibited the best hydrogen evolution performance, needed only 43.7 mV overpotential to reach 10 mA cm−2 current density with a Tafel slope at 21.3 mV dec−1. In this work, the high-efficiency electrocatalysts of Ni-doped 1WC-1/2Mo 2 C@CFP have been prepared, which provides an insight into theoretical research of composite carbon-based electrocatalysts. [ABSTRACT FROM AUTHOR]

In the past decades, the German paper industry has been increasing the sustainability of paper production by continuously using more recovered paper. Today, recovered paper is an essential secondary raw material to produce new paper. Nevertheless, around 20 % of the paper produced in Germany is still not returned to the recovered paper stream and instead is mostly thermally used. To further increase the use of fibers from recovered paper as secondary raw material and thus, to reduce primary energy consumption and greenhouse gas emissions, new approaches to recycle recovered paper from mixed waste streams are needed. In the research project "Energy savings in paper production by opening up the value chains of recovered paper from lightweight packaging, residual waste and commercial waste" (EnEWA), a treatment process is developed to recover and recycle recovered paper from the mentioned waste streams. The advanced mechanical process to be newly developed consists of dry-mechanical sorting, the manufacturing of economically usable secondary raw materials (defibration), their wet-mechanical dissolution, separation and hygienization and finally their reuse in paper production. This enables the exploitation of new waste streams in material recycling and thus contributes to reduced energy consumption as well as CO2 emissions within the circular economy. Initial material characterization analyses show that on the one hand the quality of the paper discarded in mixed waste streams is sufficient to be used as secondary raw material and that on the other hand up to 50 % of the paper discarded could have been disposed of within the separate paper collection. The results are incorporated in the development of a sorting process for pre-concentrates, which serves as input material for the treatment process to recover paper fibers. In further steps, the results generated will be integrated, for instance, into the future development of the minimum standard for packaging recycling. [ABSTRACT FROM AUTHOR]

This paper describes the fabrication and characterization of porous SiC ceramics derived from highly-filled preceramic papers. The SiC ceramics were obtained by spark plasma sintering of stacked preceramic papers at temperatures of 2100 and 2200 °C under pressures of 5–60 MPa for 10 min. The microstructure and phase composition were analyzed by scanning electron microscopy and X-ray diffraction, respectively. Gas permeation tests were performed using hydrogen permeation cell at room temperature. It is revealed that the porosity of sintered SiC can be varied from 9 to 45 % depending on the sintering parameters. The shrinkage of the materials during spark plasma sintering occurs in four stages. The linear shrinkage value of the material increases from 7 to 47 % at 2100 °C and from 20 to 50 % for the samples sintered at 2100 and 2200 °C, respectively. Correlation dependencies between porosity and mechanical properties of the fabricated SiC were established. The obtained porous SiC ceramics exhibit high bending strength of 165 MPa and gas permeation flux of 78 molH 2 /m2/s at the porosity of 36 % that make it suitable for ceramic-based membranes. [ABSTRACT FROM AUTHOR]

• The EEG is one of the most useful technologies for brain research and clinical neurology. • The acquired traces are visibly displayed, but various studies investigate the translation of brain waves in sound. • The analog EEG was equipped with an auditory output, the pen-on-paper noise made by the writer unit, useful to facilitate the diagnosis of epileptic disorders. • Early digital EEG devices could be equipped with special software to duplicate the pen-on-paper noise digitally. • Nowadays, auditory neurofeedback has applications in therapeutic interventions, cognitive improvement, and basic research. The electroencephalogram (EEG) is one of the most useful technologies for brain research and clinical neurology, characterized by non-invasiveness and high time resolution. The acquired traces are visibly displayed, but various studies investigate the translation of brain waves in sound (i.e., a process called sonification). Several articles have been published since 1934 about the sonification of EEG traces, in the attempt to identify the "brain-sound." However, for a long time this sonification technique was not used for clinical purposes. The analog EEG was in fact already equipped with an auditory output, although rarely mentioned in scientific papers: the pen-on-paper noise made by the writer unit. EEG technologists often relied on the sound that pens made on paper to facilitate the diagnosis. This article provides a sample of analog video-EEG recordings with audio support representing the strengths of a combined visual-and-auditory detection of different types of seizures. The purpose of the present article is to illustrate how the analog EEG "sounded," as well as to highlight the advantages of this pen-writing noise. It was considered so useful that early digital EEG devices could be equipped with special software to duplicate it digitally. Even in the present days, the sonification can be considered as an attempt to modify the EEG practice using auditory neurofeedback with applications in therapeutic interventions, cognitive improvement, and basic research. [ABSTRACT FROM AUTHOR]

Texas has the highest age-adjusted incidence rate of hepatocellular carcinoma (HCC) in the United States. The Cancer Prevention and Research Institute of Texas has funded the Texas Collaborative Center for Hepatocellular Cancer (TeCH) to facilitate HCC research, education, and advocacy activities with the overall goal of reducing HCC mortality in Texas through coordination, collaboration, and advocacy. On September 17, 2022, TeCH co-sponsored a multi-stakeholder conference on HCC with the Baker Institute Center for Health and Biosciences. This conference was attended by HCC researchers, policy makers, payers, members from pharmaceutical industry and patient advocacy groups in and outside of Texas. This report summarizes the results of the conference. The goal of this meeting was to identify different strategies for preventing HCC and evaluate their readiness for implementation. We call for a statewide (1) viral hepatitis elimination program; (2) program to increase nonalcoholic steatohepatitis and obesity awareness; (3) research program to develop health care models that integrate alcohol associated liver disease treatment and treatment for alcohol use disorder; and (4) demonstration projects to evaluate the effectiveness of identifying and linking patient with advanced fibrosis and cirrhosis to clinical care. [ABSTRACT FROM AUTHOR]

This bibliographic analysis was designed to review all dental publications in the Kingdom of Saudi Arabia (KSA) and evaluate the effect of international collaboration on the impact of published articles. The Web of Science (WOS) database was used to extract all related published articles in the KSA from 1982 to 2021. The keywords were connected using Boolean Operators to download related articles. Downloaded articles were screened according to the following inclusion criteria: collaboration journal category, journal discipline, number of citations, number of authors, and impact factor. After applying the inclusion criteria and excluding single-author articles, 5,689 documents were included in the final analysis. The chi-square test and two-independent samples t -test were used to determine the statistical significance between the variables. A significantly higher proportion of articles with international collaboration (51.4%) were published in dental journals than those published nationally (43.3%) or within the institutional level (41.8%) (P < 0.0001). In addition, the average number of citations (9.28 ± 23.8) ranged from 0 to 749, received by an article and the impact factor of the journal in which the article was published, significantly higher in the case of internationally collaborative work compared with national or within institutional collaboration (P < 0.0001). International collaboration positively affected the impact factor, number of citations, and quartile rank of published articles. Moreover, the number of co-authors in different countries contributes to the international collaboration effect. [ABSTRACT FROM AUTHOR]

Aerogel composites reinforced by fibers have found extensive applications in the field of thermal insulation and energy conservation. However, the composites are hindered by their high infrared radiation transmittance and weak interface adhesion in practical applications. Herein, we designed and prepared a novel thin composite called 'fiber/whisker/aerogel paper' (SWAP) with a thickness of less than 1 mm. The SWAP integrated SiC nanowhiskers (SiC nw) as opacifiers and ultrafine SiO 2 fibers as reinforcement, fabricated through wet manufacturing and sol-gel process. The 'fiber/aerogel paper' (SAP) and SWAP exhibited low thermal conductivity at room temperature, measuring 0.025 W/(m·K) and 0.033 W/(m·K), respectively. Additionally, they exhibited low densities of 0.195 g/cm3 and 0.225 g/cm3, respectively. Notably, SWAP exhibited excellent high-temperature insulation performance, primarily due to its low infrared transmittance (50% at 3 μm). The incorporation of SiC nw and ultrafine SiO 2 fibers collectively enhanced the interfacial adhesion with the aerogel matrix even amidst rigorous testing (weight loss less than 3%). SWAP also demonstrated flexibility, high thermal stability, hydrophobicity, and flame resistance. Furthermore, a comprehensive investigation into the performance variations and influencing g factors of the material was conducted under different heat treatment conditions. This research provides guidance for the application of such materials under high temperatures. [ABSTRACT FROM AUTHOR]

The ZrO 2 fiber paper exhibits excellent thermal insulation properties, however, its limited mechanical strength and insufficient thermal stability hinder its widespread applications. The composite fiber papers, using mullite fibers possessing a high aspect ratio and exceptional thermal stability combined with ZrO 2 fibers, were fabricated via a vacuum-assisted filtration method. This method involved the successive stacking of composite fibers with alumina sol, using vacuum-induced directed water flow to create a layered structure reminiscent of nacre. The layered structure of the nacre, which demonstrates remarkable strength and hardness, has also served as a source of inspiration for the architectural design of the fiber paper. The tensile strength of pure ZrO 2 fiber paper was significantly enhanced by the addition of 7 wt% mullite fibers, resulting in a remarkable increase to 0.1805 kN/m. The paper exhibited exceptional resistance to bending, maintaining 96 % of its bending strength even after undergoing 100 cycles. The thermal shrinkage of the composite paper, containing 15 wt% mullite fibers, was reduced from 17.75 % observed in pure ZrO 2 fiber paper to a mere 1.32 % after undergoing heat treatment at a temperature of 1300 °C for 2 h. The composite paper, measuring 5 mm in thickness and consisting of 7 wt% compositions, displayed exceptional thermal insulation properties when exposed to a hot side temperature of 1370 °C. It effectively insulated temperatures up to approximately 1000 °C. [ABSTRACT FROM AUTHOR]

As a reflection of the scholar's mastery of basic theories and professional knowledge, the dissertation is an important yardstick for measuring the level of scientific research. At present, the problem of academic misconduct is becoming increasingly prominent, which is not only related to personal academic ethics, but also related to the overall development of the national academic and scientific research field. In the traditional method of evaluating the quality of papers, it is mainly based on the evaluation experts' comments and scores. However, there are cases that the evaluation experts' comments and scores are inconsistent in practice. To address this problem, we proposed a paper quality consistency detection model based on the nearest neighbor analysis dimensionality reduction algorithm. Compared with other traditional models, the experimental results show that the detection accuracy of XGBoost model after dimensionality reduction using nearest neighbor analysis algorithm reaches 85.81%. [ABSTRACT FROM AUTHOR]

Rewritable paper is of great significance for environmental and sustainable development. Specially, the water rewritable paper based on hydrochromism has aroused extensive research interesting for being clean, convenient and compatible with the current ink jet printer. Nevertheless, previously reported water rewritable paper requires complex and time-consuming fabricating process. Here, we report a facile strategy to fabricate structural colored water rewritable paper simply via two step infiltration on commercially available paper. After infiltration of graphene laminates and SiO 2 colloidal spheres in sequence, the obtained paper is integrated with assembled graphene laminates (AGLs)/amorphous colloidal arrays (ACAs) hierarchical composite structure. Owing to the advantageous micro-topography, selective separation capacity and high visible light absorption property of the underlying AGLs, SiO 2 ACAs with vivid structure color can be realized. Moreover, the hydrochomism of the hierarchical composite structure is resulted from the synergistic contribution of the hydrophilic structural color and the visible light absorption property of AGLs. Our strategy is based on the environmental-friendly structural color and convenient to realized, which offers a promising alternative to rapidly fabricate colored water rewritable paper. [Display omitted] [ABSTRACT FROM AUTHOR]

In the wake of the IT revolution of recent decades, Polish companies have experienced changes, such as the obligation to report financials in purely electronic form. This shift creates benefits but is also a source of challenges. The authors' inspiration for this research stems from the recognition of a clear research gap in the literature relating to the electronic reporting of micro and small companies. The article aims to verify how Poland's smallest companies covered by reporting obligations cope with the compulsory compilation, signing and publication of financial statements solely by electronic means. The study was qualitative in nature, followed a case study methodology, and concerned two Polish micro-companies. The results show that the entities analyzed essentially do cope with e-reporting. Certain attributes of these reports - - such as timeliness or completeness, are questionable, however. The results contribute to the understanding of the financial reporting practice by micro companies in Poland. They can indicate directions for changes in the actions taken by those involved in corporate reporting. Cognizance of this issue can also provide the regulator with directions for regulatory changes. [ABSTRACT FROM AUTHOR]

Excessive trabeculation, often referred to as "noncompacted" myocardium, has been described at all ages, from the fetus to the adult. Current evidence for myocardial development, however, does not support the formation of compact myocardium from noncompacted myocardium, nor the arrest of this process to result in so-called noncompaction. Excessive trabeculation is frequently observed by imaging studies in healthy individuals, as well as in association with pregnancy, athletic activity, and with cardiac diseases of inherited, acquired, developmental, or congenital origins. Adults with incidentally noted excessive trabeculation frequently require no further follow-up based on trabecular pattern alone. Patients with cardiomyopathy and excessive trabeculation are managed by cardiovascular symptoms rather than the trabecular pattern. To date, the prognostic role of excessive trabeculation in adults has not been shown to be independent of other myocardial disease. In neonates and children with excessive trabeculation and normal or abnormal function, clinical caution seems warranted because of the reported association with genetic and neuromuscular disorders. This report summarizes the evidence concerning the etiology, pathophysiology, and clinical relevance of excessive trabeculation. Gaps in current knowledge of the clinical relevance of excessive trabeculation are indicated, with priorities suggested for future research and improved diagnosis in adults and children. [Display omitted] • Current evidence shows that the extent of trabeculated vs compact myocardium in the adult is determined by differential (allometric) growth of each myocardial layer. Because trabeculated myocardium does not coalesce to form the compact myocardial wall, the term "left ventricular noncompaction" is inaccurate and use should be discouraged. • Excessive trabeculation, as diagnosed using existing criteria, may be present as a normal variant or as a response to preload conditions. • In adults incidentally found to have excessive trabeculation with normal myocardial function and morphology, clinical management is determined by other cardiovascular symptoms or abnormalities, without regard to trabecular pattern. • In adults diagnosed with hypertrophic or dilated cardiomyopathy where excessive trabeculation is also present, the extent of ventricular trabeculation has not been demonstrated to alter management nor prognosis. Following guidelines developed specifically for those conditions is recommended. • In infants and children, caution is warranted because fewer data are available regarding the etiology and prognosis of excessive trabeculation. Clinical evaluation for occult neuromuscular disease or another genetic/metabolic etiology may be appropriate. [ABSTRACT FROM AUTHOR]

• Liquid water saturation in carbon paper is measured • Quantifies the capillary trapping effect of isolated water drops in carbon papers • Proposes a model describing liquid water drops transport In previous macroscopic average models of proton exchange membrane fuel cells (PEMFCs), liquid water was assumed to be continuous throughout the carbon paper. The transport of disconnected water drops in carbon paper has long been neglected in these models, which tend to underestimate water saturation in carbon paper. This study proposes a two-phase flow model that considers the transport of disconnected water drops to simulate the air-water transport in carbon paper. The proposed model was established based on the relationship between capillary force and liquid water saturation, and this relationship was obtained by conducting centrifuge experiments. In the centrifuge experiment, initially, the water saturation inside the carbon paper sample was one, and the centrifugal acceleration was zero. As the centrifugal acceleration increased, the water saturation decreased owing to the centrifugal force. After twenty seconds, the water saturation no longer decreases because the centrifugal force on the liquid water is balanced by the capillary force. Centrifugal acceleration was used to evaluate the capillary force. When the centrifugal acceleration was 185 m s − 2 , the saturation of the water drops in the balanced state was 32.0%. As the centrifugal acceleration increases to 739 m s − 2 , the saturation decreases to 6.5%. According to the experimental results, a function correlating the saturation and centrifugal acceleration, that is, the capillary force, was established. Finally, the results show that the centrifugal acceleration is more than 18.5 times that of the gravitational acceleration, indicating that the effect of gravity on the motion of water drops is negligible. [Display omitted] [ABSTRACT FROM AUTHOR]

Keywords Ash utilization; Canadian pulp paper mills; Biomass boiler ash; Fly ash; Bottom ash; Ash application Highlights * General ash characterization is not enough to find useful applications of ash. * Ash use in the liming agent requires different properties than ash use in concrete. * Ash must be characterized according to its application requirements. * PPM ash can mainly be used for concrete, ag lands, liming agent, and forest roads. Abstract Pulp and paper mill biomass boilers generate large quantities of ash in Canada with British Columbia (BC) being the highest ash generating province followed closely by Quebec. Generally, the generated ash is landfilled, particularly in BC, with only a small amount being used beneficially. It is anticipated that the difficulty associated with the management of ash will worsen over time as the industry increases its reliance on green fuel. Thus, there is a strong need to identify beneficial uses of pulp and paper boiler ash for the sake of environmental and economic sustainability. The purpose of this report is to provide the first step in this direction, a review of proposed or implemented uses for coal and hog (or wood) ash around the world. Considering both the properties of the ash and local opportunities, this could be the first step toward screening the applications that may apply to individual mills. Several large-scale practices use ash, such as land application (as a nutrient source or as a liming agent), use in the construction industry (as a replacement for cement or as a fill material), and reclamation of mine sites and stabilization of unpaved forest roads. In some cases, relatively small-scale applications have been used which included uses such as a compost component, agent for pH adjustment of liquid streams and slurries, blasting abrasive, and source of quartz for glass manufacturing to name a few. It is important to note that the chemical nature of both fly and bottom ashes can be quite variable due to the type of wood residues combusted as well as combustion equipment used and must be considered in identifying beneficial applications. Abbreviations AB, Alberta; ASTM, American Society for Testing and Materials; BC, British Columbia; CCE, Calcium Carbonate Equivalents; CCME, Canadian Council of Ministers of the Environment; CFIA, Canadian Food Inspection Agency; GHG, Greenhouse Gas; ITE, Inorganic Trace Element; LOI, Loss on Ignition; MSW, Municipal Solid Waste; NS, Nova Scotia; ON, Ontario; QC, Quebec; TNV, Total Neutralizing Value; XRF, X-ray Fluorescence Author Affiliation: (a) FPInnovations, Pointe-Claire, QC, H9R 3J9, Canada (b) FPInnovations, Vancouver, BC, V6T 1Z4, Canada * Corresponding author. Article History: Received 8 February 2022; Revised 29 June 2022; Accepted 9 July 2022 Byline: Allan Elliott [allan.elliott@fpinnovations.ca] (a), Talat Mahmood [talat.mahmood@fpinnovations.ca] (a), Abu Kamal [kamal.abu@gmail.com] (b,*)

Keywords Pulp and paper mill sludge; Land spreading; Waste management; Soil health; Soil ammendment Highlights * Land spreading paper pulp mill sludge (PPMS) offers economic and environmental benefit. * Characteristics and utility of PPMS vary with treatment level (primary vs secondary). * Co-application of N sources can prove beneficial in some cases. * Routine analysis and robust regulation prevent adverse outcomes from PPMS use. * Longer term studies on soil chemistry and ecology effects are warranted. Abstract It is estimated that >400 Mt of board and paper are produced globally per year, and that 4.3--40 kg (dw) of sludge like material, pulp and paper mill sludge (PPMS), is generated for every tonne of product. PPMS are now more widely reused in agriculture as a soil amendment due to their high organic content of 40--50% by weight, perceived low toxicity and possible liming capabilities. Within this review article historic and recent literature on PPMS land spreading are combined with knowledge of European and UK regulation to explore the benefits, potential impacts and viability of land spreading PPMS. The review reveals that risks relating to potential N immobilisation in soils post-application can be readily mitigated, if desired, by coapplication of an N source, or even pre-treatment of sludge via composting. The benefits to crops have been demonstrated emphatically, while negative ecological impacts under typical field application rates have not been observed to date. The case is therefore strong for continued land application of the material as an environmentally responsible and sustainable use option. However, there are currently gaps in the literature regarding longer-term implications of PPMS applications in agriculture and in regards to the possible presence of emerging contaminants in some PPMS materials, both of which have been identified as areas that merit further research. Author Affiliation: (a) School of Geography, Geology and the Environment, Keele University, Keele, ST5 5BG, UK (b) 4R Group, Control House, A1 Business Park, Knottingley Road, Knottingley, WF11 0BU, UK * Corresponding author. Article History: Received 11 July 2021; Revised 24 February 2022; Accepted 27 May 2022 Byline: Tomi Turner [t.turner@keele.ac.uk] (a,*), Rebecca Wheeler (b), Ian W. Oliver (a)

The article describes an approach to build a search index for fuzzy objects recognition in scientific and technical papers. A fuzzy object is explained as an entity described by some physical parameters. A physical parameter consists of two parts: a value, represented in various forms of digits, and a physical unit, represented as text with some digits. The approach presented in the article allows users to search not by ordinary substrings, but by physical parameters with range, less than or greater than operators. The current realisation of the approach is a web service that has functionality to perform all stages for extraction of physical parameters of a fuzzy object. These stages are the extraction of sentences, the extraction of physical parameters and the normalisation of physical parameters values. The web service can be exploited in the synchronous and asynchronous modes. The synchronous mode helps to troubleshoot the software. The asynchronous mode is designed to process papers using queues in the distributed computer systems. The current work is aimed to develop a search engine which will address the challenge of structuring information of a continuously growing number of scientific and technical papers. The search index will help to perform robust navigation among a huge number of documents for scientific workers and engineers. [ABSTRACT FROM AUTHOR]

Spatially resolved fluid-flow modulation and its corresponding integration becomes a crucial aspect to consider when designing high-performing paper-based analytical devices. As such, high demand exists for cost-effective techniques able to selectively control flow in patternable regions of the device. In this regard, a solution composed of potassium alum and animal glue; sizing materials used in the fabrication of calligraphy Xuan paper, is successfully adapted for the first time in a revolutionary approach to efficiently modulate the capillary flow in paper microfluidic channels. Flow delays are achieved by coating the substrate systematically through the variation of parameters such as the ratio of alum to glue, the concentration of alum-glue in the solution, and the number of subsequent coating layers of alum-glue. Moreover, digitized patterning with alum-glue is developed to achieve programmable wicking profiles of accelerating, decelerating, and quasi-linear flow displacement by alternating coated and uncoated zones in the channel. Additionally, the influence of alum-glue when performing biometric assays is investigated by performing a horseradish peroxidase activity colorimetric assay and found to have negligible effects on reading, where a negligible difference of 5.2% was observed in an assay performed in a coated paper substrate, compared to an uncoated one. [ABSTRACT FROM AUTHOR]

• New flame-resistant coatings with high mechanical properties for bagasse paper were synthesized using,3-di-aryl-2,2,2,4,4,4-hexachlorocyclodiphosph(V)azane, starch, CaCO 3 , NaHCO 3. • The thermal properties of all specimens were measured. • The ignition properties as the flame chamber (UL/94), and limiting oxygen index (LOI) was measured according to standards. This work aimed to enhance the thermal and mechanical properties of bagasse paper by synthesizing new coatings to prevent bagasse paper from the ignition. Paper sheets were treated with 0.5 percent cychlodiphosph(V)azane/ CaCO 3 solution (1.5 percent), 1.5 percent NaHCO 3 solution, and CNCs mixed with 5.0percent of starch. Paper sheets were treated by immersing bagasse paper in a coating mixture. The paper sheets were then allowed to air dry at ambient temperature. It is important to measure the burning rate (BR) to give people a chance to decrease the loss. These enhancements were investigated using elongation and tensile strength, air permeability test, Fourier Transform Infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA), and combustion tests (UL/94 and LOI). So, the bagasse paper treatments can be used as packaging materials. [ABSTRACT FROM AUTHOR]

Buildings are often located near ambient air pollution sources such as wildfire or heavy traffic areas. While windows in buildings are intermittently open for free cooling or natural ventilation, increased leakage area can lead to elevated human exposure to air pollutants of outdoor origin. The objective of this study is to investigate the effectiveness of paper filter windows in reducing exposure to outdoor air pollution and improving indoor air quality. The physical properties of paper windows as filtration media were experimentally determined, based on which multi-zone indoor air quality and ventilation analysis (CONTAM) simulations were performed for a full-scale building. The results show that the outdoor-indoor air exchange rate of a building can increase about 100% when conventional windows are replaced with paper filter windows. Even with the increased air exchange rate, the infiltration of outdoor particles into the building was reduced about 57–77% for the particle size range of 7–300 nm. These findings imply that paper windows have potential benefits for controlling both outdoor originated pollutants and indoor-generated pollutants with minimal energy inputs, especially in cities and communities impacted by urban air pollution and wildfires. [Display omitted] • We studied removal of outdoor particles due to paper filter windows in buildings. • Paper windows reduced indoor concentrations of outdoor particles up to 77%. • Due to paper windows, air exchange rate of the building increased about 100%. • Paper windows reduced indoor-generated pollutants (e.g., CO 2) by 35–45%. Synopsis: This study investigates filtration and ventilation performances of paper filter windows. [ABSTRACT FROM AUTHOR]

The catalytic ozonation processes with continuous-flow reactors were used for pulp and paper mill wastewater treatment. [Display omitted] • The pulp and paper wastewater is treated effectively by catalytic ozonation with continuous-flow reactor. • The porous ceramsite catalytic ozonation can be used for continuous-flow process. • The porous ceramsite catalyst is continuously and stably operated for 30 days. • The lowest E EO value is reached at the O 3 dosage of 15 g/L. • The degraded or transformed organic pollutants present in PPMW by O 3 alone system and catalytic ozonation system were identified. The pollutants in wastewater can be degraded effectively by heterogeneous catalytic ozonation due to the production of hydroxyl radical (•OH) with strong oxidation power. For the natures of low weight, large specific surface area, excellent physical strength and stable chemical characteristics, the porous ceramsite was chosen for catalytic ozonation of wastewater in the present study, and the practical application parameters of the system were investigated for the actual pulp and paper mill wastewater (PPMW) in the continuous-flow reactor including temperatures, feeding flow rate, O 3 flow rate and O 3 dosage. The optimum experimental conditions were obtained (T = 25 ℃, feeding flow rate = 0.25 L/min, O 3 flow rate = 0.5 L/min, O 3 dosage = 15 g/L) for the process of catalytic ozonation. The results show that the effluent concentration of COD decreases from about 200 mg/L to 10 mg/L, namely the removal efficiency is about 95 %. The stability of the catalyst over time was tested in the continuous-flow reactor for 48 days, confirming that the porous ceramsite exhibits good performance in 30 days. The reusability of the catalyst was studied after the used catalyst was washed with Milli-Q water and ethanol, exhibiting good catalytic activity of the regenerated catalyst in three cycles. The fluorescent excitation-emission matrix (EEM), UV–vis analysis and GC–MS analysis were used for analyzing the organic pollutants in raw PPMW and after treatment. These results indicate that the process of catalytic ozonation with porous ceramsite has a high treatment efficiency on PPMW, and the continuous-flow reactor can be more practically used for a full-scale community PPMW application at a mill level. [ABSTRACT FROM AUTHOR]

Flexible inkjet-printed antenna is presented. The proposed antenna is designed on a synthetic paper substrate with an area of 35 × 40 mm2 to provide frequency bands for many popular wireless applications. Simulation and measurement are used to study the performances, including the frequency bands, radiation patterns, peak gains and efficiency, of the antenna in two severely bending conditions with a curvature radius of 20 mm in the forward and backward directions. The antenna printed in photo papers material could not be fully flexible due to cracks introduced to the coating material on the surface of the photo paper. Hence, the resin coated material was only suitable for curved devices. The synthetic paper material used in this paper does not have a resin coating, therefore, the antenna does not lose its flexibility and can be bent in both the forward and backward directions without any cracks. Results show that bending in these two conditions has insignificant effects on the performances of the antenna. With a curvature radius of 20 mm in the forward direction, the measured peak gain and efficiency of the antenna are in the ranges from −3 to +2 dBi and 40% to 60%, respectively. The results together with the low cost make the antenna most suitable for many flexible 5G communications devices. [ABSTRACT FROM AUTHOR]

Text summarization in medical domain is one of the most crucial chores as it deals with the critical human information. Consequently the proper summarization and key point extraction from medical deeds using pre-trained Language models is now the key figure to be focused on for the researchers. But due to the considerable amount of real-world data and enormous amount of memory requirement to train the Large Language Models (LLMs), research on these models become challenging. To overcome these challenges multiple prompting and tuning techniques are being used. In this paper, effectiveness of prompt engineering and parameter efficient fine tuning is being studied to summarize the Hospital Discharge Summary (HDS) papers effectively, so that these models can accurately interprete medical terminologies and contexts, generate brief but compact summaries, and draw out concentrated themes, which opens new approaches for the application of LLMs in healthcare and making HDS more patient-friendly. In this research LLaMA 2 (Large Language Model Meta AI) has been considered as the base model. Also, the model has been fine-tuned using QLoRA (Quantized Low Rank Adapters), which can bring down the memory usage of LLMs without compromising the data quality. This study explores the way to use LLMs on HDS datasets without the hassle of memory usage using QLoRA, into electronic health record systems to further streamline the handling and retrieval of healthcare information. • Presents a method to summarize HDS by parameter-efficient fine-tuning to a LLM. • It utilizes QLoRA fine-tuning on the LLAMA 2 to minimize the memory requirements. • A comparative analysis of prompt engineering and parameter-efficient fine-tuning is performed. • The effectiveness of the approach is evaluated using BLEU and ROGUE-L scores. • Medical professionals have conducted a quality assessment of the summarization. [ABSTRACT FROM AUTHOR]

[Display omitted] • Paper mill sludge ash (pm SA) was used as catalysts to activate PMS. • Aerobic calcination was conducive to the exposure/formation of octahedral FeIII. • The O O bond fracture was the root pathway for FeIV O production. • The release of solid calcium in pm SA could inhibit the active decay of FeIV O. • The pm SA could effectively degrade similar pollutants in near-neutral water. The excellent performance of high-valent iron-oxo species (FeIV O) in the degradation of pollutants by activating peroxymonosulfate (PMS) had attracted much attention. However, the generation and reaction mechanisms were still unclear. In this study, iron-rich paper mill sludge was used as a raw material for the first time to prepare iron-based catalysts with abundant octahedral FeIII sites (Fe oct III). The results showed that the highest content of Fe oct III was found in the paper mill sludge ash obtained by aerobic calcination at 800 °C (pm SA800), and the pm SA800 could exhibit excellent catalytic activity (0.4785 min−1) and stability during the oxytetracycline (OTC) degradation process. The characterization and density functional theory (DFT) calculations further indicated that the Fe oct III was the dominant active site for FeIV O production. PMS tended to be adsorbed on two adjacent Fe oct III sites to form a [Fe oct III-OSO 2 OO(H)-Fe oct III] complex with a two-site adsorption configuration. Subsequently, the O O and O H bonds in [Fe oct III-OSO 2 OO(H)-Fe oct III] broken by absorbing energy, generating FeIV O. It's worth noting that the Ca species of pm SA800 effectively stabilized the pH of the reaction solution, which ensured the stable and continuous production of FeIV O. This work provides a new idea and insight for preparing catalysts that could produce FeIV O active species. [ABSTRACT FROM AUTHOR]

Waste paper and tyre are typical solid wastes with distinct composition. Their pyrolysis could generate varied volatiles that may interact with each other or with resulting char. In this study, the co-pyrolysis of waste paper and tyre was investigated at 400 and 600 ºC, with the focus on understanding the interaction of the volatiles on evolution of the products. The results show that the interaction of the volatiles at 400 ºC forms more gaseous products like CO and CO 2 , while the interactions of the heavier organics at 600 ºC forms more oil (49.3% vs 42.6%). The interaction of the volatiles also affects the generation of sulfur-containing organics and diminishes the paper-derived aldehydes and ketones or the heavy organics with the π-conjugated structures in the oil. In addition, the volatile-char interactions exist and form the char of higher carbon content through promoting carbonization and deoxygenation reactions, generating char of higher thermal stability and higher hydrophilicity via tailoring functional group, pore structures and morphologies of the char. [Display omitted] • Interaction of volatiles in co-pyrolysis of waste paper and tyre exists. • Co-pyrolysis promotes formation of gases at 400 ℃ while oil at 600 ℃ via condensation. • Paper-derived intermediates capture CH x * /H* radicals, minimizing CH 4 /H 2 formation. • Volatiles interactions interfere formation of S-containing organics and aldehydes/ketones. • Co-pyrolysis affects composition, stability, functionality and morphologies of char. [ABSTRACT FROM AUTHOR]

[Display omitted] • Facile and scalable self-assembly of perylene diimide polymer with carbon paper. • Effective facilitation of carrier separation by π-π built-in electric field. • Narrowed band gap and low VB due to the VB tail states induced by π-π interactions. • Enhanced photocatalytic water oxidation activity of the PDIP/CP photocatalyst sheet. • Suitability of the PDIP/CP photocatalyst sheet for large-scale applications. Photocatalytic water splitting is a highly promising future energy technology. In contrast to the extensive work on particulate photocatalysts, there is still a lack of sufficient investigation for regularized photocatalysts. Here, from perylene diimide polymer (PDIP) and commercial carbon paper (CP), we develop a self-assembled PDIP/CP photocatalyst sheet that is easily scalable and can be used for photocatalytic water oxidation. Driven by strong interfacial π-π interactions, the PDIP spontaneously adsorbs onto the CP, which leads to a narrowed band gap, down-shifted VB edge, and enhanced separation of the photogenerated charge carriers of the PDIP. Under visible light, the PDIP/CP photocatalyst sheet shows significantly enhanced photocatalytic water oxidation activity (4 h cumulative oxygen evolution is 1.7 times higher than that of the powder-suspended system) and considerable cycling stability. The PDIP/CP photocatalyst sheet has the potential for large-scale device applications. [ABSTRACT FROM AUTHOR]

This study presents a novel method for synthesizing hierarchical porous zinc oxide (ZnO) nanostructures by thermally decomposing green-synthesized hydrozincite. The hydrozincite was prepared at room temperature using zinc acetate dihydrate and calcium carbonate (CaCO 3) in cellulose printing papers as the precipitating agent. The resulting ZnO particles exhibit a distinctive flower-like morphology, consisting of porous nanosheets composed of interconnected nanoparticles. The average crystallite size of the hierarchically structured zinc oxide nanoparticles, as determined via X-ray diffraction Rietveld refinement method, was found to be 18.8 nm when calcined at 500 °C. However, with increasing calcination temperature to 600, 700, and 800 °C, the average crystallite size also increased to 24.3, 30.4, and 47.2 nm, respectively. The ZnO synthesized at temperatures of 500 °C, 600 °C, and 700 °C exhibits higher electrocatalytic activity toward the hydrogen evolution reaction (HER) compared to both the ZnO synthesized at 800 °C and commercial ZnO. This enhanced performance can be primarily attributed to the nanosized ZnO particles, which provide a substantial surface area, high accessibility of active sites, and fast charge transfer kinetics. In terms of photocatalytic activity, all the samples show HER improvement under the UV light irradiation, attributed to the generation of photoexcited charge carriers. The ZnO synthesized at 800 °C and the commercial ZnO exhibit greater enhancements in photocatalytic activity compared to the other samples. This implies that larger solid particles with fewer nanopores result in a greater exposed surface area for UV-light absorption. The hierarchically structured ZnO nanoparticles demonstrate promising electrocatalytic and photocatalytic activities, as well as stability, opening up potential applications in various fields, including energy conversion and environmental remediation. [ABSTRACT FROM AUTHOR]

The article focuses on a synopsis of a critically appraised paper discussing the potential benefits of eccentric resistance training for enhancing strength and power, but not gait, in patients with neurological conditions. Topics discussed include the findings of the study regarding the effects of eccentric resistance training, its limitations in improving gait function, and the implications for therapeutic interventions in this patient population.

The article focuses on a commentary discussing a critically appraised paper titled "In adults with persistent dyspnoea following pulmonary embolism, an exercise-based rehabilitation program improved exercise capacity and quality of life compared with usual care." It discusses how exercise-based rehabilitation improves exercise capacity and quality of life for adults with persistent dyspnea post-pulmonary embolism.

The article focuses on a commentary discussing a critically appraised paper titled "Hand-arm bimanual intensive therapy including lower extremities (HABIT-ILE) improves bimanual performance and gross motor function in pre-school children with unilateral cerebral palsy." It mentions the efficacy of HABIT-ILE in enhancing bimanual performance and gross motor function among preschool-aged children diagnosed with unilateral cerebral palsy, offering insights into its benefits for this demographic.

The article focuses on a critically appraised paper titled "Hand-arm bimanual intensive therapy including lower extremities (HABIT-ILE) improves bi-manual performance and gross motor function in pre-school children with unilateral cerebral palsy." It discusses the efficacy of HABIT-ILE in enhancing manual dexterity and overall motor function in young children diagnosed with unilateral cerebral palsy, highlighting its potential benefits for this specific population.

Keywords Greenhouse gases; Wood ash; Paper sludge; Microbial activity; Mineral nitrogen; Boreal soils Highlights * The effect of wood ash and paper sludge on acid soils was tested in incubation tests. * Both increased the soil microbial biomass, respiration, and net mineralization. * Greenhouse gas emissions were larger for paper sludge amended soils. * Supplementing biochar to wood ash increased soil CO.sub.2 fluxes. * Supplementing biochar to paper sludge or limestone ash reduced soil CO.sub.2 fluxes. Abstract Land-use change in the boreal forest region leads to agriculture to be carried out on acid, shallow and low fertility soils. To correct soil fertility and promote crop productivity, manure and inorganic fertilizers are added, increasing the risk for greenhouse gas emissions (GHGE). To reduce the reliance on synthetic soil amendments while taking advantage of locally relevant industrial by-products, wood ash (WA) and paper sludge (SL) have been proposed as soil amendments for a range of soil types. We posited that amending soils with WA, SL and biochar will improve soil health parameters and fertility of boreal soils. Microbial activity resulting to nitrogen losses and availability were assessed. WA had a stronger ameliorative effect on acid boreal soils compared to SL. Both WA and SL increased soil microbial biomass and basal respiration resulting in higher net mineralization and thus significant increases in CO.sub.2 emissions. Co-application of urea with WA or SL further increased net mineralization compared to when used independently. Conversely, the biochar's effect was short-lived and not significant. Nevertheless, addition of biochar was shown to reduce CO.sub.2 emissions in all cases except in WA amended soils. No significant differences were observed in CH.sub.4 emissions across all treatments. WA and SL may improve soil fertility and quality but could also contribute significantly to GHG emissions in acid boreal soils. Further research is recommended to assess the mitigating effect of various biochar feedstocks on GHG emissions when co-applied with WA and SL. Author Affiliation: (a) School of Science and the Environment, Memorial University of Newfoundland and Labrador, Corner Brook, A2H 5G4, Newfoundland and Labrador, Canada (b) Environmental Science Program, Memorial University of Newfoundland and Labrador, St. John's, A1B 3X7, Newfoundland and Labrador, Canada (c) Natural Resource Sciences, McGill University, Sainte-Anne-de-Bellevue, H9X 3V9, Québec, Canada * Corresponding author. School of Science and the Environment, Memorial University of Newfoundland and Labrador, Corner Brook, A2H 5G4, Newfoundland and Labrador, Canada. Article History: Received 2 November 2022; Revised 16 December 2022; Accepted 30 December 2022 Byline: Ayodeji O. Medaiyese (a), Jianghua Wu (a), Adrian Unc [aunc@grenfell.mun.ca] (a,b,c,*)

Keywords Bentonite; Leachates; Shear strength; Hydraulic conductivity; Consolidation parameters Highlights * Engineering properties of two Indian bentonites are presented. * Unconfined compressive strength reduced in the presence of all three leachates. * Hydraulic conductivity of the bentonites increased due to leachates. * Concentration level of metals and bentonite's composition greatly influenced engineering properties. * Influence of the fly ash leachate is the most among all three. Abstract A rapid upsurge in urban and industrial developments leads to increased generations of solid wastes. The most accepted technique of waste discarding around the world is landfilling. Leaching chemicals from municipal dumping grounds can pollute the groundwater source and the surrounding environment without appropriate precautionary measures. Bentonite is a low-cost constituent used as a liner material in landfills due to its low permeability, high sealing ability, high specific surface area, and the ability to hold up the impurity migration through adsorption. However, leachate interaction with bentonite may alter its properties and reduce its usefulness as a barrier material in the long term. Also, bentonite having different chemical and mineralogical compositions will behave differently due to the leachate interaction. Therefore, it is necessary to compare the performance of various bentonites in the presence of leachates. In the present investigation, two Indian bentonites of different mineralogical compositions were studied for their change in the index properties, swelling, swelling potential, swelling pressure, hydraulic conductivity, consolidation parameters and shear strength properties in the presence of fly ash, sewage sludge and paper mill leachates. The outcomes showed that in the presence of all the leachates, liquid limit, free swell, compression index, swelling potential, swelling pressure, time to complete 90% of consolidation and shear strength dropped; whereas, hydraulic conductivity and coefficient of consolidation increased. Besides, the quality of bentonite prominently influenced the hydraulic, strength and swelling behaviour. The bentonite having a higher cation exchange capacity, liquid limit, specific surface area, and swelling capability undergoes a higher variability in the free swell (80.0, 73.8 and 76.9% decline), liquid limit (73.5, 61.7 and 69.2% decline), swelling potential (61.3, 55.7 and 51.0% decline), swelling pressure (53.3 and 56.4% decrease), and hydraulic conductivity (57.5, 8.6 and 41.1 times increase at a void ratio of 1.2) values when infused with fly ash, sewage sludge and paper mill leachates, respectively. The study also showed that the fly ash leachate interaction causes a higher variation in bentonite behaviour than sewage sludge and paper mill leachates. The study's findings would prove beneficial to design engineers for selecting bentonite types for landfill liners. Author Affiliation: Department of Civil Engineering, Indian Institute of Technology Guwahati, Guwahati, 781039, Assam, India * Corresponding author. Article History: Received 22 June 2021; Revised 12 October 2021; Accepted 17 October 2021 Byline: Saswati Ray [r.saswati@iitg.ac.in] (*), Anil Kumar Mishra [anilmishra@iitg.ac.in], Ajay S. Kalamdhad [kajay@iitg.ac.in]

Keywords Hydrological properties; Paper mill wastes; Wood industry by-products; Heavy metals; Soil amendments; Potting media Highlights * Valorization of organic waste is important to improve environmental sustainability through recycling of valuable waste. * Herein we investigated the potential applications of wood ash and paper sludge as a potting media for horticultural crops. * Wood ash and paper sludge improved the physicochemical properties of podzolic soil. * Paper sludge was more effective than wood ash in improving soil hydrological properties for better plant growth. * Furthermore, the incorporation of biochar in the potting media enhanced water holding capacity. Abstract Background and objectives Organic waste management in environmentally sustainable way is important not only to reduce the negative impacts on ecosystems but also valorizing the waste resources. Herein we evaluated the potential of wood ash (WA) and paper sludge (PS) wastes from a pulp and paper mill as potting media and their effects on the physicochemical properties of podzolic soil. Methods WA, PS and biochar (BC) was mixed in different combinations with a sandy loam podzolic soil. Potting media treatments included: T1--soil (negative control); T2--Promix.sup.TM (positive control); T3--50%soil+50%WA; T4--75%soil+25%WA; T5--50%soil+50%PS; T6--75%soil+25%PS; T7--75%soil+25%BC; T8--25%soil+50%WA+25%BC; T9--50%soil+25%WA+25%BC; T10--25%soil+50%PS+25%BC; T11--50%soil+25%PS+25%BC, T12-- 25%soil+25%WA+25%PS+25%BC and replicated three times. Results Potting media treatments expressed significant (p < 0.00) effects on pH, bulk density, total porosity, field capacity, plant available water (PAW) and water retention curves. Potting media amended with WA showed high pH range (8--12) while PS amendments exhibited pH in range where most plant nutrients are available (6.5--7.5). Results depicted significantly lower bulk density, and increased total porosity and water holding capacity of potting media amended with WA and PS. BC addition further enhanced the water retention properties compared to combinations without BC. T6, T10 and T11 produced higher amounts of PAW with desired pH compared to T1 and T2. Conclusion WA, PS and BC showed high potential for developing podzolic soil-based potting media, but their effects on plant growth and elemental uptake need to be investigated. Author Affiliation: (a) School of Science and the Environment, Memorial University, Corner Brook, NL, A2H 5G4, Canada (b) Environmental Science Program, Faculty of Science, Memorial University, St. John's, NL, A1B 3X7, Canada * Corresponding author. School of Science and the Environment, Memorial University, Corner Brook, NL, A2H 5G4, Canada. Article History: Received 21 May 2021; Revised 18 September 2021; Accepted 20 September 2021 Byline: Muhammad M. Farhain (a), Mumtaz Cheema (a), Yeukai Katanda (a), Muhammad Nadeem (a), Bilal Javed (a), Raymond Thomas (a), Ratnajit Saha (b), Lakshman Galagedara [lgalagedara@grenfell.mun.ca] (a,b,*)

Paper with simultaneous fire-resistance and hydrophobicity have greatly potential applications in the fields of packing, storage and delivering information, which attracts increasing attention recently. Different from the traditional cellulose-based paper which is extremely easily damaged by water and fire, a new type of highly flexible, fire-resistant and hydrophobic paper based on Si 3 N 4 nanowires and polydimethylsiloxane (PDMS) is reported. Specially, the Si 3 N 4 @PDMS core-shell nanowires with 3D interlocking structure are designed, in which the Si 3 N 4 nanowires act as the inorganic fire-resistant frameworks and the PDMS shell with low surface energy provides the hydrophobic surface. The Si 3 N 4 @PDMS core-shell nanowires are intertwined and interlaced to form a highly flexible Si 3 N 4 @PDMS paper. The tensile strength of Si 3 N 4 @PDMS paper is 6.19 MPa, indicating the good mechanical property. The obtained Si 3 N 4 @PDMS paper has the characteristics of writability, fire-resistance and hydrophobicity. The high thermal stability of Si 3 N 4 nanowires makes Si 3 N 4 @PDMS paper exhibit excellent fire resistance. No obvious change is observed for the commercial paper with Si 3 N 4 @PDMS paper as the fire-shielding layer after heating for 30 min. In addition, the contact angles of water droplets are all greater than 110° over the surfaces of Si 3 N 4 @PDMS paper after mechanical damages, chemical corrosions and thermal treatments. Si 3 N 4 @PDMS paper can be used in oil/water separation and oil collection. More importantly, Si 3 N 4 @PDMS paper can be used for writing without being damaged by fire or water. The present work may inspire the development and application of functional paper and is expected to become a breakthrough in the traditional paper industry. [ABSTRACT FROM AUTHOR]

Given its superior structure, the abundance of surface functional groups, and low cost, cotton fiber filtration paper can be used as the support for hydrogen evolution reaction (HER) and oxygen evolution reaction catalysts (OER) instead of copper foam (CF), nickel foam (NF), or carbon cloth (CC). Herein, the chemical plating method was used to create thin self-supporting electrodes based on cotton fiber filtration paper (FP). The Co-Ni-P amorphous nanospheres can be uniformly dispersed on the self-supporting FP due to its porous structure and oxygen functional groups. The Co-Ni-P/FP electrode has an overpotential as low as 125 mV for HER and 320 mV for OER at the current density of 10 mA cm−2. Additionally, according to density functional theory (DFT) calculations, the Co atom added to the Ni-P nanosphere can lead to considerably more charge accumulation around the Co and Ni active sites, which greatly encourages the HER and OER processes. The novel porous support, FP, provides a fresh way the preparation of self-supporting electrodes. [Display omitted] • Filter paper is used to prepare the self-supporting electrode as the substrate. • The preparation method is simple and the properties are stable. • Rich oxygen-containing functional groups of FP promote deposition and dispersion. • Explore the excellent electrochemical performance of amorphous Co-Ni-P/FP by DFT. [ABSTRACT FROM AUTHOR]

In the current study, the exergoeconomic analysis of a cogeneration pulp and paper plant under bi-operating modes at different environment temperatures of 290, 295, 305, 310, and 320 K was investigated. Two operating modes of the cogeneration system, i.e., a hybrid operating mode using a power boiler and a recovery boiler and a singular operating mode using a power boiler only, were considered. Natural gas was utilized as the main fuel in the power boiler, while black liquor with heavy fuel oil was employed in the recovery boiler. The total capital investment, total operating, exergy, unit exergy, and exergy destruction costs for each operating mode were evaluated. The results indicated that the total capital investment cost was 3420.27 $/h, and the total capital investment and the operation and maintenance costs in the hybrid and singular modes were 5853.27 and 6226.67 $/h, respectively. As well, the unit exergy cost and the exergy cost of steam introduced by the power boiler were 39.31 $/MWh and 2503.69 $/h, respectively. Where these values for the recovery boiler were 34.69 $/MWh and 554.30 $/h, respectively. Furthermore, the exergy destruction costs at an environment temperature of 320 K for the power and recovery boilers were 1436.6 and 213.63 $/h, respectively. In the hybrid mode, the soda at a 10% concentration was recovered, with a rate of 32 t per hour desired for the cooking process in the pulp mill. In addition, the use of black liquor as a bio-fuel in the recovery boiler saved 14% of the consumption of natural gas. • Exergoeconomic analysis was performed for the pulp and paper industry. • Hybrid and singular operating modes for different ambient temperatures were studied. • Unit exergy cost, exergy cost, and exergy destruction cost were evaluated. • Using black liquor as a bio-fuel in RB saved about 14% of natural gas consumption. [ABSTRACT FROM AUTHOR]

The objective of this paper is to show the added value of using tools such as eyetracking, galvanic skin response, facial coding and others in the field of market research and user experience research. We will present 3 case studies in which these tools have been used successfully. We will give an overview of the background, the objectives, methods and results and how the neuro-tools provided additional insights into consumer behaviour, which would otherwise not have been possible. In this paper we will specifically show cases from packaging design, advertising research and user experience research thus only covering a small part of possible application areas. [ABSTRACT FROM AUTHOR]

Existing scanners produce paper images with different types of deformations such as noise, rotation and shear. These deformations affect the accuracy of the fingerprinting the document images, which entails utilizing advanced feature extraction operators. Existing feature extractor such as the Uniform Local Binary Patterns (ULBP) has been found to be limited in dealing with the global view of the texture and neglecting useful information about the images. This article presents an Automated Paper Fingerprinting (APF) method that deploys a combination approach for Gabor Filters (GF) and Uniform Local Binary Patterns (ULBP) called the GFULBP operator to cater for both local and global image information during the feature extraction process for higher texture classification accuracy. The APF method is evaluated by a standard dataset of 306 blank paper images derived from pre-existing scanner image dataset from Universiti Kebangsaan Malaysia (UKM) with properties ranges from 50 DPI, 100 DPI, and 150 DPI respectively. The images are captured by a flatbed scanner with 50 DPI, 100 DPI, and 150 DPI resolutions. Each image is represented by four patches that are segmented from specific locations of the image. The test results of the APF show that GFULBP is able to outperform the ULBP alone by 30.68% when the GF has a 5 scale and π/2 orientation degree. This work finds that the integration of Gabor filters and ULBP significantly enhances the feature extraction quality and fingerprinting accuracy. [ABSTRACT FROM AUTHOR]

• Synthesis a new flame resistant coating for bagasse paper using 1,3-di-p-toluidine-2,2,2,4,4,4-hexachlorocyclodiphosph(V)azane, NaHCO 3. • Study the mechanical characteristics. • The thermal properties of the coated and uncoated specimens were measured. • The ignition properties as the flame chamber (UL/94), and limiting oxygen index (LOI) was measured according to standards • Those improvements are due to the synthesis of new flame retardant coatings based on commercially available chemicals. This manuscript aimed to enhance the mechanical, thermal, and ignition properties of bagasse paper when coated with different coatings synthesized from hydroxyethyl cellulose, 1,3-di-p-toluidine-2,2,2,4,4,4-hexachlorocyclodiphosph(V)azane, Talc powder, NaHCO 3 , cellulose nanocrystal. The effect of these coatings on the mechanical properties was studied by measuring elongation, tensile strength, and burst strength. The stages of degradation and ash residue of the measuring specimens were determined using thermal gravimetric analysis (TGA), behind that, the ignition properties as the flame chamber (UL/94), and limiting oxygen index (LOI) was measured according to standards. These tests proved that 1,3-di-p-toluidine-2,2,2,4,4,4-hexachlorocyclodiphosph(V)azane has a direct effect on improving the mechanical characteristics and enhancing the ignition properties of the coated specimens compared to uncoated. In this study the physical, mechanical, thermal, and ignition properties of the bagasse paper sheets were enhanced by easy and low-cost method via synthesis of new coatings based on commercially available chemicals in a reasonable cost. [ABSTRACT FROM AUTHOR]