Search

• Cellulosic non-woven fabrics were prepared from ionic liquid solutions. • Suitable molecular weights of cellulose contributed to forming ultrafine fibers. • Fiber diameter was reduced and strength was improved as air velocity increased. • Ultrafine cellulose fibers with a high strength of ca. 940 MPa were obtained. A wet-type solution blow spinning system equipped with a single concentric nozzle was assembled to investigate the key factors for preparing ultrafine regenerated cellulose fibers. The effects of the degree of polymerization (DP) of cellulose and the velocity of blown air on fiber morphology were studied by rheological analyses and scanning electron microscopy. The results demonstrated that cellulose with a DP of 2365, together with a high air velocity, could aid the formation of continuous ultrafine fibers. Fluid filament deformation was observed using a high-speed camera and clearly correlated with the final fiber morphology. Additionally, aligned ultrafine fibers were spun on a rotational collector and their mechanical properties and structural parameters were characterized. Ultrafine cellulose fibers with a high strength of 941.4 MPa and a high crystallite orientation of 0.909 were obtained. [ABSTRACT FROM AUTHOR]

Abstract: Many textiles have been often used in marine environments for a wide variety of purposes. Consequently, effective and clean methods to prevent biofouling in these textiles are needed. In this study, a nylon mesh doped with AgI was examined for its antifouling performance. The nylon mesh was iodinated with an iodine–potassium iodide aqueous solution and subsequently immersed in silver nitrate solution to form AgI particles in the fiber. SEM-EDX analysis indicated that the AgI crystals were highly incorporated into the nylon 6,6 polymer (173wt% gain). The bactericidal activity of AgI-doped nylon mesh was more than 200 times higher than that of silver-coated nylon mesh. Furthermore, continuous prevention of biofouling in the coastal marine environment was attained for 437days by using the AgI-doped nylon mesh. Since the concentration of the released silver ions from the nylon mesh was estimated to be less than 1ppb, the proposed nylon mesh is useful as an effective and clean method for prevention of biofouling in polymer textiles. [Copyright &y& Elsevier]