Search

[Display omitted] • Conceptual geological model of unconformity-related uranium deposits in the Badami group of the western Kaladgi basin, India. • Project-Scale prospectivity analysis using manual and fuzzy logic approaches. • Three high-priority targets are identified for drilling and 8 additional low-priority targets for further exploration. • A simple and cost-effective workflow for targeting subsurface unconformity-related deposits using remote-sensing and hydrogeochemistry. Developing successful exploration strategies for finding new ore deposits is a major challenge for exploration geologists, particularly, for concealed deposits in terranes with thick sediment cover. Proterozoic unconformity-related uranium deposits occur at, below, or above, unconformable contacts between Archean and Paleoproterozoic crystalline basement and siliciclastic sediments of middle or later Proterozoic age, often at locations where fault systems cut across either one or both of the geologic units that lie above and below the unconformity. The present study implements project-scale prospectivity analyses to identify drilling targets in the Badami Group of the western Kaladgi basin, India. Topographic profiles; field observations of breccia and lineaments; surface and sub-surface sampling; petrography and geochemistry; drill-core lithologs; and interpreted aeromagnetic anomalies were used to build a generalized local geological model of unconformity-related uranium deposits in the study area. Based on the geological model and a generalised mineral systems model, hydrothermal alteration, proximity to lineaments, proximity to unconformity surface, and anomalous uranium content on the surface and in the groundwater were identified as key project-scale targeting criteria. Seven high-priority drilling targets were mapped based on expert driven prospectivity analysis constrained by a GIS-based fuzzy prospectivity modelling. Out of these, four target areas coincide with the targets identified by the Atomic Minerals Directorate (AMD) of India based on their independent investigation. The three new targets from this study are recommended as targets for detailed exploration and drilling. In addition to this, about eight additional low priority targets were identified for follow-up exploration activities. This paper demonstrates that the prospectivity mapping methods can be applied at the project scale. The strategy demonstrated in this study can be used for exploration targeting in similar basins like the western Kaladgi basin that are structurally less disturbed. [ABSTRACT FROM AUTHOR]

Abstract: Presently the installed capacity of electricity generation in India is 160 GWe. The integrated ene rgy policy aims at an installed capacity of 778 GWe by 2031-32 to achieve per capita electricity consumption of 2700 kWh/year as against the 700 kWh/year. The share of nuclear power in India is around 3% presently. The increase in installed capacity is possible by increasing the share of nuclear power. India has opted for a unique three-stage power programme based on closed nuclear fuel cycle, which provides a multiplier effect through breeding. Consequent to the 123 agreement and clearance from Nuclear Supplier‟s Group (NSG) for international cooperation in the field of nuclear energy, the reactor technology options are wide open. Some of the technologies which are being pursued are: Pressurized Heavy Water Reactors (PHWRs) fueled with domestic Natural Uranium (NU), PHWRs fueled with imported Natural Uranium/Slightly Enriched Uranium (SEU), Light Water Reactors (LWRs) procured from abroad using imported Lightly Enriched Uranium (LEU) fuel, PHWRs with Reprocessed Uranium (RU) obtained from reprocessing spent fuel of LWRs, indigenous Pressurized Water Reactors (PWRs) and Fast Breeder Reactors (FBRs) using MOX/metallic fuel. The increase in the share of nuclear power through above technologies require setting up of fuel fabrication facilities such as: new PHWR Fuel Fabrication with indigenous sources, joint collaboration with foreign countries for fabricating fuel for imported LWRs, setting up PHWR fuel fabrication facilities with SEU/RU under international safeguards, setting up of enrichment and fuel fab rication facilities for indigenous PWRs and a series of fast reactor fuel fabrication facilities for fabricating fuel for FBRs. In addition to fuel fabrication facilities, facilities for manufacturing zirconium alloy and stainless steel structurals, tubes and components are also required to be set up. The paper gives in detail the emerging nuclear fuel fabrication activities in India. [Copyright &y& Elsevier]

Abstract: The three stage Indian nuclear power programme envisages efficient use of its modest uranium resources and full exploitation of its vast Thorium resources. Indian economy is on a fast growth track. The growth in population and economy is creating huge demand for energy which has to be met with environmentally benign technologies. Nuclear Energy is best suited to meet this demand without causing undue environmental impact. In view of limited resources of Uranium and vast resources of Thorium, a closed fuel cycle to fully exploit the potential of the two resources is co nsidered essential. In conformity with such a strategy, Recycle fuel fabrication technologies have been under development in India for over three decades. Some of the activities such as (i) Fabrication and development of MOX fuels for LWRs/PHWRS (ii) Fabrication of mixed carbide and mixed oxide fuels for Fast Reactors (iii) Research and development in Metallic Fuels for Fast Reactors and (iv) Development of fuels for Thorium utilization - are briefly discussed in the paper. [Copyright &y& Elsevier]

Abstract: When examined from the point of view of the size of its population and economy, India is not well endowed with energy resources. Studies done by the Department of Atomic Energy indicate that even after exploiting full potential of every available source of energy including nuclear energy, India needs to continue to import energy resources. In this backdrop, an initiative was launched by Government of India to open up international civil nuclear commerce so as to enable India to access natural uranium from international market and to set up nuclear reactors in technical cooperation with other countries. The paper provides details of what has been done so far, ongoing steps and likely growth scenario for nuclear installed capacity in the country. [Copyright &y& Elsevier]

Abstract: The paper presents a systematic study on suitability of various gamma lines for monitoring of 238U activity in soil samples around a uranium mineralized zone of Kylleng Pyndengsohiong Mawthabah (Domiasiat), Meghalaya in India. The area lies in a plateau region which recieves the highest average annual rainfall (12,000mm) in the world. The geochemical behaviour of the uranium and its daughter products at such wet climatic conditions imposes restrictions to assess 238U through gamma lines of radon decay products. Soil samples were collected from nine locations around the uranium mineralization zone for analysis. The ratio of the concentration of uranium obtained from gamma energies of radium daughter products to the 63.29keV of 234Th was found to vary from 1.01 to 2.07, which indicates a pronounced disequilibrium between uranium and radium daughters. The results obtained from various gamma energies were validated from the data generated by Instrumental Neutron Activation Analysis (INAA) technique. The 238U activities from the two analytical methods show a well fitted regression line with correlation coefficient 0.99 which validates the reliability of 63.29keV energy for estimation of uranium in such conditions. [Copyright &y& Elsevier]