Search

Abstract: Herein, we present the low-temperature solid-phase combustion synthesis of tantalum carbide (TaC), TaC/tantalum silicide (TaSi2), and TaC/tantalum boride (TaB) nanoparticles by the silicothermic reduction of potassium fluorotantalate (K2TaF7) in the presence of carbon, boron, and polytetrafluoroethylene (PTFE, 1 [1] BJH, Barrett–Joyner–Halenda; HRTEM, high-resolution transmission electron microscopy; MMC, metal matrix composite; PFTE, polyfluorotetraethylene; PTFE; polytetrafluoroethylene; RF, radio frequency; SAED, selected area electron diffraction pattern; T c , combustion temperature; TEM, transmission electron microscopy; U c , combustion velocities; XRD, X-ray diffractometer. (C2F4) n ). The temperature–time profiles of the combustion wave were measured by thermocouples and used to calculate the combustion parameters: temperature and wave velocity. The flame temperature was found to increase with the concentration of PTFE. Using high resolution transmission electron microscopy, a homogeneous distribution of highly crystalline nanoparticles was observed. The thermal–kinetic activation energy, the heat released during each of the individual reactions, and the chemical mechanism of the overall combustion process are discussed with respect to the final products. [Copyright &y& Elsevier]

Tantalum nitride nanoparticles were produced from a (K2TaF7 +5NaN3) exothermic mixture under the combustion regime. The effects of the K2TaF7/NaN3 ratio and KF and NH4F concentrations on the combustion parameters, product composition, and size of the tantalum nitride particles were studied. Depending on the synthesis conditions, the combustion temperature was maintained in the 700–1200°C range, resulting in hexagonal ε-TaN, TaN0.8, and Ta2N phases. The dominant phases were TaN and TaN0.8 in the 1000–1200°C range, whereas only the Ta2N phase was present in the 700–100°C range. Pure-phase cubic tantalum nitride (δ-TaN) was produced with 4.0mol of NH4F at a combustion temperature of ~800°C. Under controlled reaction conditions, the size of the tantalum nitride particles was about 10–50nm. We also found that during the synthesis, the stainless steel tube located inside of the reaction mixture was partially coated with fine TaN crystals. The mechanism of the combustion process is discussed in regards to the experimental results. [ABSTRACT FROM AUTHOR]