Search

Fault detection in analog circuits is of great importance to predict the correct operation of the circuit. For this purpose, soft computing techniques such as those based on the application of fuzzy inference systems stand out. However, given the large variability that can exist in analog circuits due to component tolerance, the initial fuzzy inference system (FIS) may not be able to accurately diagnose the different hard faults. This study presents a methodology to diagnose and detect the faults that can occur in analog circuits, which is based on the development of a FIS, starting from a specific fault situation in the analog circuit, and subsequently on the optimization of the membership functions using an evolutionary algorithm so that the adjusted FIS can classify and predict different failure situations. To this end, the application of optimization techniques based on particle swarm optimization (PSO) will be analyzed to develop a FIS capable of predicting different faults. In addition, pattern search algorithm will also be analyzed. A Sallen-Key band-pass filter and a single stage of a small-signal amplifier are used as test circuits. The proposed methodology shows that it is possible to accurately predict the faults that could arise in the circuits under study. [ABSTRACT FROM AUTHOR]

Complex dynamics of change caused by fluctuating production conditions require an efficient use of the industrial knowledge base for condition monitoring in machine tools. Data-based AI approaches enable the detection and classification of faults like blowholes and highly rely on the quantity and quality of the available process data. Due to the findings of the state of art, the use of digitalized domain knowledge for fault diagnosis is given too little attention. Based on various knowledge-based approaches for fault diagnosis a framework is presented that enables the formalization of implicit knowledge to improve the classification quality under parallel use of existing AI-approaches. [ABSTRACT FROM AUTHOR]

Bearing is one of the most critical parts used in rotary machines. Bearing faults break down the mechanism where it is located. Moreover, the faults may cause to malfunction by spreading to the entire system. Thus this may result in catastrophic failure eventually. Precise and decisive feature extraction from the raw vibration signal maintains to be one of the current topics explored for fault diagnosis in bearings. In this study, vibration signals are obtained from bearings which are formed with artificial faults of specific dimensions from a bearing test setup. Instead of employing traditional feature extraction methods found in the literature, a novel feature extraction method for bearing faults called one-dimensional ternary pattern (1D-TP) is applied. The proposed approach is a statistical method that uses patterns obtained from comparisons between neighbors of each value on vibration signals. The study aims to identify the size (mm) of the fault by determining the bearing part (inner ring, outer ring, ball) from which the faults in the bearings are caused. Several classification techniques were performed by using ternary patterns with RF (Random Forest), k-NN (k-nearest neighbor), SVM (Support Vector Machine), BayesNet, ANN (Artificial Neural Networks) models. As a result of analyzing the signals obtained from the experimental setup with the proposed model, 91.25% for dataset_1 (different speed), 100% for dataset_2 (fault type — inner ring, outer ring, ball) and 100% for dataset_3 (fault size (mm)) success rates are determined. • A novel approach is proposed to extraction of features from bearing signals. • One advantage is that this method uses all data points for feature extraction. • It is fast and can be use in real-time application. • High accuracies achieved for bearing fault classification. • Original data (Experimental setup of authors). [ABSTRACT FROM AUTHOR]

Deep learning-based incipient fault diagnostic techniques have achieved surprisingly well in wind turbines. Due to component failures, wind turbines must undergo active maintenance, substantially influencing revenue and power generation. Unfortunately, there are consistently uneven data distributions between samples with faults and those without faults, resulting in incorrect fault classification. Wind turbine fault classification has a significant data imbalance problem, compromising learning attention for majority and minority classes. Machine learning methodologies based on Generative Adversarial Networks (GAN), over-sampling, and under-sampling techniques for generating synthetic data have been widely employed to address the imbalance data problem. However, the traditional synthetic minority oversampling technique (SMOTE) accomplishes oversampling using linear interpolation between close minority class samples, which could be confusing, subpar, and indistinguishable from the majority class. This study suggests combining over and under-sampling using adaptive SMOTE and edited nearest neighbors (ASMOTE-ENN) that incorporate over-sampling with adaptive SMOTE and under-sampling with ENN to improve the quality of the generated samples. With this resampling technique, noise in an imbalanced dataset is reduced on three levels by using an adaptive nearest neighbor selection algorithm to find the nearest neighbors that are visible. Then use SMOTE to create samples that precisely fall into the minority class, and later use the ENN technique to eliminate instances that contribute to noise afterwards. Resampling data created by combining over- and under-sampling approaches to match the data distribution over all classes is the foundation of the suggested method's efficacy. A hybrid ensemble method is used for effective classification, including boosting, bagging, and stacking techniques. The original unbalanced and balanced data using the ASMOTE-ENN algorithm were classified using the proposed hybrid ensemble method. The classification results show that the proposed strategy is more accurate than a few imbalanced fault diagnosis techniques. • To gain complete knowledge, characteristics of SCADA data are obtained using data analysis. • We present the adaptive SMOTE-ENN algorithm-based data resampling technique to deal with imbalanced data. • Create a hybrid ensemble classification technique to identify faulty and no-fault events effectively. • The results demonstrate that the suggested method outperforms the most popular ML techniques. [ABSTRACT FROM AUTHOR]

Residential air-conditioning systems are subject to soft faults, which can reduce their efficiency, capacity, and life expectancy, without being detected by the occupants. Early detection and diagnosis of faults could potentially be done by using machine learning (ML) on measurable features of the air-conditioner, such as refrigerant temperatures and pressures. This paper describes a novel approach to applying ML, which is to train a fault classifier using data from one system, and apply it to different systems. If this is effective, it can significantly reduce the cost of widescale application of ML fault classification. The support vector machine (SVM) algorithm was used. An additional question for practical application is whether the number of sensors required for input feature measurement can be reduced. This work also tests the feature reduction effect, in combination with applying an ML classifier trained on one system, to classify faults in two other systems. The results are disappointing, showing that fault classification is poor when the SVM classifier is trained on a different system than it is applied to. However, with additional work, this method has potential for improvement, possibly to a point where it can be a viable approach for field deployment. [ABSTRACT FROM AUTHOR]

Fault detection and diagnosis (FDD) in chemical process systems is an important tool for effective process monitoring to ensure the safety of a process. Multi-scale classification offers various advantages for monitoring chemical processes generally driven by events in different time and frequency domains. However, there are issues when dealing with highly interrelated, complex, and noisy databases with large dimensionality. Therefore, a new method for the FDD framework is proposed based on wavelet analysis, kernel Fisher discriminant analysis (KFDA), and support vector machine (SVM) classifiers. The main objective of this work was to combine the advantages of these tools to enhance the performance of the diagnosis on a chemical process system. Initially, a discrete wavelet transform (DWT) was applied to extract the dynamics of the process at different scales. The wavelet coefficients obtained during the analysis were reconstructed using the inverse discrete wavelet transform (IDWT) method, which were then fed into the KFDA to produce discriminant vectors. Finally, the discriminant vectors were used as inputs for the SVM classification task. The SVM classifiers were utilized to classify the feature sets extracted by the proposed method. The performance of the proposed multi-scale KFDA-SVM method for fault classification and diagnosis was analysed and compared using a simulated Tennessee Eastman process as a benchmark. The results showed the improvements of the proposed multiscale KFDA-SVM framework with an average 96.79% of classification accuracy over the multi-scale KFDA-GMM (84.94%), and the established independent component analysis-SVM method (95.78%) of the faults in the Tennessee Eastman process. [ABSTRACT FROM AUTHOR]

Diagnosis aims at predicting the health status of components and systems. In photovoltaic systems, it is vital to guarantee energy production and extend the useful life of photovoltaic power plants. Multiple prediction and classification algorithms have been proposed for this purpose in the literature. The accuracy of these algorithms depends directly on the quality of the data and the features with which they are tuned or trained. In this paper, an innovative approach for predicting the health status of photovoltaic systems is proposed, which includes a feature selection stage. This approach first discriminates severely affected photovoltaic panels using basic electrical features. In a second step, it discriminates the other faulty panels using more elaborated time–frequency features and selecting the most relevant features through correlation and variance analysis. Finally, the approach predicts the health status of photovoltaic panels using a nonlinear regression method named partial least squares. This later is then combined with linear discriminant analysis and compared. The approach is validated with real current data from a photovoltaic plant composed of twelve photovoltaic panels with power between 205 and 240 Wp in three health states, namely broken glass, healthy, and big snail trails. The results obtained show that the proposed approach efficiently predicts the three health states. It determines the level of degradation of the panels, which indicates priorities to corrective and predictive maintenance actions. Furthermore, it is cost-effective since it uses only electrical measurements that are already available in standard photovoltaic data acquisition systems. Above all, the approach is generic and it can be easily extrapolated to other diagnosis problems in other domains. [ABSTRACT FROM AUTHOR]

Faults in transmission lines can cause several problems to transmission utilities. An adequate diagnosis of such events can improve service restoration time and, consequently, asset availability. This work proposes a machine learning-based approach to diagnose transmission line faults. The oscillography files of the fault case are processed and applied to four different classifiers, which must identify: phases involved, electrical nature, impedance level, and, fault cause. The method, which is inherently robust regarding signal noise and lack of synchronization between relays, combines Decision Trees, feature engineering, and optimization to perform the fault diagnosis based only on relay measures. It was tested in two fault data sets, one containing 24,000 faults generated using a Real Time Digital Simulator and another one with 46 real faults. The results obtained were very promising, with accuracy values close to 100% for involved phase and fault nature, 90% for impedance level, and 80% for fault cause. [Display omitted] • A ML approach is proposed for comprehensive fault diagnosis in transmission lines. • Fault phases, nature, impedance, and cause are inferred from oscillographs. • The approach is very robust regarding noise and lack of synchronism between relays. • It relies on very few adjustable parameters. Most internal parameters are optimized. • Results on RTDS simulated and real fault cases are provided. [ABSTRACT FROM AUTHOR]

Deep transfer network (DTN) has been widely used for classification tasks, which introduces maximum mean discrepancy (MMD) based loss function to extract similar latent features and reduce the discrepancy of distributions across the source and target data. However, it is a little challenging to apply deep transfer learning for fault classification tasks in industrial chemical processes, since process variables have physicochemical properties and occupy different impacts in reflecting the process status. Hence, features extracted from these process variables also have different contributions for domain adaptation in DTN. In this paper, a linear discriminant analysis (LDA)–based DTN is proposed for fault classification ofchemical processes, in which a weighted MMD is designed for domain adaptation. First, the LDA algorithm is introduced to determine how much influence each variable can distinguish samples from source and target domains. Then, a corresponding weight is assigned to each feature variable to design the weighted MMD for network transferring. A Tennessee Eastman (TE) process and a real hydrocracking process are used to validate the fault classification performance of the LDA-based DTN. The results indicate LDA-based DTN has better generalization performance and classification accuracy than traditional DTN. [ABSTRACT FROM AUTHOR]

In this paper, empirical Wavelet transform (EWT), Hilbert transform (HT) and weighted random vector functional link network (WRVFLN) are integrated for fault detection, classification, and location estimation in a series capacitor compensated double circuit transmission line (SCCDCTL). The full cycle current signals from the point of fault inception are decomposed using EWT to extract three band-limited modes (BLMs). The four efficacious instantaneous features namely energy, Shannon entropy, the standard deviation of the magnitude, and crest factor are computed from the Hilbert transformed array of the BLMs to construct the feature vector. A diagonal matrix W is computed from the zero sequence current of original six current signals as a weighting factor to categorize the ground fault accurately. Numerous faults are generated with a wide variation of the system conditions such as fault resistance, fault inception angle, fault distance, percentage compensation level, source impedance, line parameters, load angle, and inter-circuit fault in MATLAB/Simulink environments. An efficient WRVFLN computational intelligence technique is proposed to recognize and estimate the location of the faults by taking the extracted suitable feature vector with weight factor as an input. The performances of WRVFLN are compared with the recently developed advanced classifiers such as least-square support vector machine (LSSVM) and extreme learning machine (ELM) in the MATLAB interface. The lesser computational complexity, faster learning speed, superior classification accuracy, accurate fault location estimation, and short event detection time prove that the proposed EWTHT–WRVFLN method can be implemented in the real power system for online fault diagnosis. Finally, the developed system architecture is implemented on the reconfigurable digital field programmable gate array (FPGA) in ISE design suite 14.5 environments to verify the cogency of the proposed method in real-time. The feasibility of the proposed method is tested and validated by using the fast FPGA digital circuitry in a loop. • Empirical Wavelet Transform is used for series compensated lines for fault studies. • A weighted Random Vector Functional Link Network is used for fault classification and location. • A comparison with LS-SVM is presented in this paper to validate the superiority of WRVFLN. • Implementation of the WRVFLN using FPGA hardware exhibits the real-time capability of the new approach. [ABSTRACT FROM AUTHOR]