Search

Dy 3+ and Sm 3+ doped Li 4 CaB 2 O 6 materials were prepared by the solid state reaction. The phase analysis of all phosphors were determined using the X- Ray Powder Diffraction Analysis. The photoluminescence (PL) properties of both phosphors were investigated using spectrofluorometer at room temperature. The first luminescent material, Li 4 CaB 2 O 6 : Dy 3+ emits 489, 577 and 674 nm upon excitation with 345 nm. The second luminescent material, Li 4 CaB 2 O 6 : Sm 3+ , emits (565–570), (602–609), 650 and 712 nm upon excitation with 404 nm. Also, the dependence of the emission intensity on the activator ions (Dy 3+ and Sm 3+ ) concentration for the Li 4 CaB 2 O 6 were studied in detail. It was observed that the concentration quenching of Dy 3+ and Sm 3+ in Li 4 CaB 2 O 6 are 0.05 and 0.06 mol, respectively. [ABSTRACT FROM AUTHOR]

MSr 4 (BO 3 ) 3 :Sm 3+ (M = Li, Na) materials were synthesized a solution combustion synthesis method followed by heating of the precursor combustion ash at 800 and 750 °C, respectively. The synthesized phosphors were characterized by using the powder XRD. The excitation and emission spectra of these materials were measured at room temperature with a spectrofluorometer. The photoluminescence properties of MSr 4 (BO 3 ) 3 :Sm 3+ (M = Li, Na) materials with different mol ratios of Sm 3+ were analyzed in detail. Both LiSr 4 (BO 3 ) 3 :Sm 3+ and NaSr 4 (BO 3 ) 3 :Sm 3+ phosphors emit a strong in orange–red region. It was observed that the optimum concentration of Sm 3+ in LiSr 4 (BO 3 ) 3 and NaSr 4 (BO 3 ) 3 are 0.04 and 0.03 mol, respectively. Finally, The relation between the photoluminescence properties of Sm 3+ and host compositions was discussed in detail. [ABSTRACT FROM AUTHOR]

Pure, Pb 2+ and Bi 3+ doped Li 4 SrCa(SiO 4 ) 2 materials were prepared by using a conventional solid state reaction. The phase of Li 4 SrCa(SiO 4 ) 2 was determined using the powder XRD. The photoluminescent properties of Pb 2+ and Bi 3+ doped Li 4 SrCa(SiO 4 ) 2 materials were investigated using a spectrofluorometer at room temperature. The emission bands of Li 4 SrCa(SiO 4 ) 2 : Pb 2+ and Li 4 SrCa(SiO 4 ) 2 : Bi 3+ were observed at 290 and 380 nm, respectively. Li 4 SrCa(SiO 4 ) 2 with different Pb 2+ and Bi 3+ doping concentrations were analyzed at room temperature. The Stokes shifts of Li 4 SrCa(SiO 4 ) 2 : Pb 2+ and Li 4 SrCa(SiO 4 ) 2 : Bi 3+ were calculated to be 5678 and 5942 cm −1 , respectively. [ABSTRACT FROM AUTHOR]

Abstract: Pure and Pb2+ doped M2Mg(BO3)2 (M=Sr, Ba) materials were synthesized at 900°C for 12h in air. The phases of the synthesized materials were determined using the powder XRD. The photoluminescence properties of the synthesized phosphors were investigated using a spectrofluorometer at room temperature. The emission and excitation bands of Sr2Mg(BO3)2: Pb2+ were observed at 330 and 260nm, respectively. And, the emission and excitation bands of Ba2Mg(BO3)2: Pb2+ were observed at 381 and 293nm, respectively. The dependence of the emission intensity on the Pb2+ concentration for the M2−x Pb x Mg(BO3)2 (M=Sr, Ba) was studied in detail. It was observed that the optimum concentrations of Pb2+ in Sr2Mg(BO3)2 and Ba2Mg(BO3)2 are 0.06 and 0.01mol, respectively. The Stokes shifts of Sr2Mg(BO3)2: Pb2+ and Ba2Mg(BO3)2: Pb2+ phosphors were calculated to be 8159 and 7883cm–1, respectively. The luminescence behavior of the Pb2+ ion in M2Mg(BO3)2 (M=Sr, Ba) is discussed. [Copyright &y& Elsevier]

Abstract: M2Mg(BO3)2:Sm3+ (M:Sr and Ba) phosphors were synthesized by a solution combustion synthesis method followed by heating of the precursor combustion ash at 900°C in air. The synthesized materials were characterized by using the powder XRD. The emission and excitation spectra of these materials were measured at room temperature with a spectrofluorometer. Both Sr2Mg(BO3)2:Sm3+ and Ba2Mg(BO3)2:Sm3+ phosphors emit a strong in orange-red region. It was observed that the optimum concentration of Sm3+ in Sr2Mg(BO3)2 and Ba2Mg(BO3)2 are 0.01 and 0.04mol, respectively. Finally, the relation between the photoluminescence properties of Sm3+ and host compositions was discussed in detail. [Copyright &y& Elsevier]

Abstract: Li6CaB3O8.5: M3+ (M3+: Dy and Sm) phosphors were synthesized by a solution combustion synthesis. The synthesized materials were characterized by using the powder XRD. The emission and excitation spectra of these materials were measured at room temperature with a spectrofluorometer. Both Li6CaB3O8.5: Dy3+ and Li6CaB3O8.5: Sm3+ phosphors emit red, yellow and green light. Consequently, these materials are promising phosphors for white LEDs. [Copyright &y& Elsevier]

Abstract: Pure, Pb2+ and Bi3+ doped LiCaBO3 materials were prepared by a solution combustion synthesis method. The phase of LiCaBO3 were determined using the powder XRD and FTIR. The photoluminescent properties of Pb2+ and Bi3+ doped LiCaBO3 materials were investigated using spectrofluorometer at room temperature. The emission bands of LiCaBO3: Pb2+ and LiCaBO3: Bi3+ were observed at 296 and 378nm, respectively. LiCaBO3 with different Pb2+ and Bi3+ doping concentrations were analyzed at room temperature. The Stokes shifts of LiCaBO3: Pb2+ and LiCaBO3: Bi3+ were calculated to be 3952 and 6440cm−1, respectively. [Copyright &y& Elsevier]

Abstract: Pure Li6CaB3O8.5 and Li6Ca1−x Pb x B3O8.5 (0.005≤x≤0.04) materials were prepared by a solution combustion synthesis method. The phase of synthesized materials was determined using the powder XRD and FTIR. The synthesized materials were investigated using spectrofluorometer at room temperature. The emission and excitation bands of the synthesized phosphors were observed at 307 and 268nm, respectively. The dependence of the emission intensity on the Pb2+ concentration for the Li6Ca1−x Pb x B3O8.5 (0.005≤x≤0.04) was studied and observed that the optimum concentration of Pb2+ in phosphor is 0.01mol. The Stokes shift of the synthesized phosphor was calculated to be 4740cm–1. [Copyright &y& Elsevier]

Pure and Pb 2+ doped Ba 2 Be 2 B 2 O 7 materials were prepared by a solution combustion synthesis method. The phase analysis of all synthesized materials was carried out using the powder XRD. The synthesized phosphors were investigated using spectrofluorometer at room temperature. The excitation and emission bands of Ba 2 Be 2 B 2 O 7 :Pb 2+ were observed at 284 and 396 nm, respectively. The dependence of the emission intensity on the Pb 2+ concentration for the Ba 2 Be 2 B 2 O 7 was studied in detail. It was observed that the concentration quenching of Pb 2+ in Ba 2 Be 2 B 2 O 7 is 0.04 mol. The Stokes shifts of Ba 2 Be 2 B 2 O 7 :Pb 2+ phosphor were calculated to be 9959 cm −1 . [ABSTRACT FROM AUTHOR]

Abstract: Nanopowders of Pb2+ doped SrAl2B2O7 materials were synthesized by a solution-combustion method using metal nitrates and urea as fuel. The synthesized materials were determined by the powder X-ray diffraction. The microstructure of the synthesized materials was investigated using scanning electron microscopy. The photoluminescent properties of Pb2+ doped SrAl2B2O7 materials were studied using spectrofluorometer at room temperature. The emission and excitation peaks of SrAl2B2O7:Pb2+ were observed at 420 and 277nm, respectively. The Stokes shifts of SrAl2B2O7:Pb2+ were calculated to be 12,292cm−1. The dependence of the emission intensity on the Pb2+ concentration for SrAl2B2O7:Pb2+ was investigated. [Copyright &y& Elsevier]

Pure and Pb 2+ doped Li 4 CaB 2 O 6 materials were prepared by the solid state reaction. The phase analysis of all synthesized materials were determined using the powder XRD. The synthesized materials were investigated using spectrofluorometer at room temperature. The excitation and emission bands of Li 4 CaB 2 O 6 :Pb 2+ were observed at 263 and 298 nm, respectively. The dependence of the emission intensity on the Pb 2+ concentration for the Li 4 CaB 2 O 6 were studied in detail. It was observed that the concentration quenching of Pb 2+ in Li 4 CaB 2 O 6 is 0.01 mol. The Stokes shifts of Li 4 CaB 2 O 6 :Pb 2+ phosphor was calculated to be 4466 cm −1 . Also, the photoluminescence properties of Pb 2+ in various lithium calcium borates (LCB) with different structure was discussed. [ABSTRACT FROM AUTHOR]