Search

Australian power generators produce approximately 170 TWh per annum of electricity using black and brown coals that accounts for 170 Mtonne of CO2 emissions per annum or over 40% of anthropogenic CO2 emissions in Australia. This paper describes the results of a techno-economic evaluation of liquid absorption based post-combustion capture (PCC) processes for both existing and new pulverised coal-fired power stations in Australia. The overall process designs incorporate both the case with continuous capture and the case with the flexibility to switch a CO2 capture plant on or off depending upon the demand and market price for electricity, and addresses the impact of the presently limited emission controls on the process cost. The techno-economic evaluation includes both air and water cooled power and CO2 capture plants, resulting in cost of power generation for the situations without and with PCC. Whilst existing power plants in Australia are all water cooled sub-critical designs, the new power plants are deemed to range from supercritical single reheat to ultra-supercritical double reheat designs, with a preference for air-cooling. The process evaluation also includes a detailed sensitivity analysis of the thermodynamic properties of liquid absorbent for CO2 on the overall costs. The results show that for a meaningful decrease in the efficiency and cost penalties associated with the post combustion CO2 capture, a novel liquid sorbent will need to have heat of absorption/desorption, sensible heat and heat of vaporisation around 50% less in comparison with 30% (w/w) aqueous MEA solvent. It also shows that the impact of the capital costs of PCC processes is quite large on the added cost of generation. The results can be used to prioritise PCC research in an Australian context. [ABSTRACT FROM AUTHOR]

Abstract: Commissioned in 2009, the CO2CRC/H3 Capture Project is demonstrating post-combustion carbon capture (PCC) on a lignite fired power plant in the Latrobe Valley, Victoria, Australia. The facility is located within International Power’s Hazelwood Power Plant and uses three different CO2 capture technologies — solvent, adsorption and membrane processes. This project, addressing the PCC issues specific for Victorian brown coal fired power stations, was initiated in July 2007 as a three year research project by the Cooperative Research Centre for Greenhouse Gas Technologies (CO2CRC) under the Victorian State Government’s Energy Technology Innovation Strategy (ETIS) program. The project is part of the Latrobe Valley Post Combustion Capture (LVPCC) Project — a multi site, multi scale, multi technology PCC trial. The integrated research and development program includes an evaluation of these technologies for commercial scale application. This paper describes the technologies used, how they have progressed from laboratory to pilot demonstration, the main outcomes, and plans for future developments. [Copyright &y& Elsevier]

Abstract: Post-combustion capture of CO2 is a key technology for the reduction of greenhouse gas emissions from Australian coal fired power stations. It is an emerging technology, which still faces significant challenges in scaling up to full commercial scale suitable for power station applications. To increase adoption by the power industry significant cost reductions in capital and operating cost must be realised. CSIRO has developed an integrated post-combustion capture R&D and pilot plant program aimed at bringing down the barriers for commercial deployment. This paper provides an overview of the program and its status. [Copyright &y& Elsevier]