Search

Flaxseed milk is a plant-based dairy alternative that is rich in nutrients. Due to the low concentration of odor compounds in flaxseed milk, it cannot be completely extracted. This poses significant challenges for analysis. Therefore, this study developed a method suitable for extracting volatile compounds from flaxseed milk and compared it with three other extraction methods. It was found that Stir Bar Sorptive Extraction had the best extraction performance, identifying 39 odorants. Flavor dilution factors ranged from 1 to 512, with higher values observed for esters. 13 key odor compounds were identified (odor activity value > 1) using the external standard method for quantification; these included four aldehydes, three pyrazines, two alcohols, two esters, and two other compounds. Pyrazine compounds exhibited the highest concentrations. Aroma recombination and omission experiments showed that nine key odorants contributed significantly to the flavor profile of flaxseed milk, imparting aroma of cucumber, green, mushroom, fruity, sweet, and coconut., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Currently, the effect of varieties on the flavor and stability of flaxseed milk remains unknown. Therefore, this study was conducted to investigate the effects of different varieties on the stability, sensory, and aromas of flaxseed milk. 51 volatile compounds were identified in flaxseed milk using Stir Bar Sorptive Extraction-Gas Chromatography-Olfactometry-Mass Spectrometry (SBSE-GC-O-MS). Among them, 1-octen-3-ol, 2-methoxy-4-vinylphenol, and 2,3,5-trimethylpyrazine contributed higher relative odor active values (ROAV), resulted in the fruity, roasted, sweet, and cucumber in flaxseed milk. Isovaleraldehyde (green notes) was not detected in XHZM. However, other compounds such as 1-nonanol (floral), γ-nonanolactone and γ-octanoic lactone (coconut milk) had higher concentrations, causing a better sensory evaluation. Additionally, its stability was relatively good. The orthogonal partial least-squares regression (OPLS) model and VIP values showed that eight compounds were responsible for the sensory differences from different varietals. The study provided references to selection and understanding flavor composition basis of flaxseed milk., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The current study was to investigate how microwave on flaxseed affected the physicochemical stability and gastrointestinal digestion of oil bodies (OBs) in flaxseed milk. Flaxseed was subjected to moisture adjustment (30-35 wt%, 24 h), and microwave exposure (0-5 min, 700  W). Microwave treatment slightly weakened the physical stability of flaxseed milk indicated by Turbiscan Stability Index, but there were no visual phase separation during 21 days of storage at 4 °C. Upon microwave treatment, OBs experienced the layer-by-layer encapsulation into loose interface embedding by storage protein-gum polysaccharide complex from bulk phase, resulting in lower viscoelasticity of flaxseed milk. The OBs underwent earlier interface collapse and lipolysis during gastrointestinal digestion, followed by synergistic micellar absorption, faster chylomicrons transport within enterocytes of rats fed flaxseed milk. The accumulation of α-linolenic acid and synergistic conversion into docosapentaenoic and docosahexanoic acids in jejunum tissue were achieved accompanied by the interface remodeling of OBs in flaxseed milk., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Aflatoxin B1 (AFB1) that is prone to contaminate corns brings a serious threat to human health. Therefore, it is of great significance to construct novel detection methods for AFB1 tracing. Here, methylamine perovskite quantum dots (MP QDs) encapsulated by ZIF-8 metal-organic frameworks (MP QDs@ZIF-8) were prepared and then ultra-stable electrochemiluminescence (ECL) sensors were developed. By the confinement of cavities structure, multiple MP QDs were crystallized and embedded inside ZIF-8 to form MP QDs@ZIF-8, achieving stable and robust ECL responds in aqueous environment. Further combined with AFB1-imprinted polymer, the constructed ECL sensor showed good selectivity and ultra-sensitivity (the detection limit was 3.5 fg/mL, S/N = 3) with a wide linear range from 11.55 fg/mL to 20 ng/mL for AFB1 quantification. Satisfactory recoveries in corn samples indicated the reliable practicability of the proposed sensor for AFB1 assay. This work provided a novel pathway in designing high-performance ECL sensing platform for food safety., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Mycotoxins contamination, especially aflatoxin B1 (AFB1) in edible oils, is a health hazard. Therefore, AFB1 trace analysis methods are urgently needed. Electrochemiluminescence (ECL) is a popular sensing method because of its low background interference and high sensitivity. However, existing ECL assays for AFB1 detection are based on aqueous rather than oil systems. Herein, we report a CH 3 NH 3 PbBr 3 quantum dots (MAPB QDs)@SiO 2 -based ECL sensor for AFB1 quantification in corn oil using an organic electrolyte. The luminophore loading and stability of the MAPB QDs@SiO 2 particles were significantly improved compared to those of bulky MAPB materials, resulting in an enhanced ECL response. Further, exploiting molecular imprinting technology, an ECL sensor for AFB1 detection with an ultra-low detection limit of 8.5 fg/mL was prepared. The reliability of the sensor was confirmed by comparable recoveries of corn oil samples with those obtained by high-performance liquid chromatography, indicating its potential for food safety evaluation., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

In order to broaden the application of grape skin anthocyanin extract (GSAE) in flour products, the interaction of gliadin (Gli) and GSAE were investigated. Seven anthocyanin components from GSAE were identified by HPLC-MS 2 , which could form complexes with Gli having different binding rates based on UV, FTIR and HPLC analysis. The fluorescence quenching experiment showed that GSAE was capable of efficiently quenching the intrinsic fluorescence of Gli through hydrophobic interactions, and the binding parameters were near to one unit at the given temperatures. Additionally, GSAE binding changed the conformational properties of Gli, increasing α-helix and β-turn content, but decreasing β-sheet and irregular coil content. The molecular docking suggested that Gli possessed various binding sites bound with different anthocyanin monomers, mainly depending on hydrogen bonds and hydrophobic interactions. These findings further proved the formation of Gli-GSAE complex, indicating the potential of anthocyanins as natural colorant., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

The potential effects of tocopherols (100 μM in emulsions) on the physicochemical stability of whey protein isolate (WPI), soy lecithin (SL), or Tween 20 (TW) stabilized flaxseed oil (FO)-in-water emulsions were investigated. During the storage (18 days at 55 ℃), the particle size, microstructure, and multiple light scattering results showed WPI-stabilized emulsions exhibited better physical stability when tocopherols were added hydroperoxides and TBARS concentration in TW-stabilized emulsions were higher than those of SL or WPI, which were suppressed differently by tocopherols. Among homologues, δ-tocopherol was more effective in inhibiting lipid oxidation than α-tocopherol, which was related to the higher interface partitioning. Moreover, the increased interfacial tension indicated tocopherols, especially δ-tocopherol, were adsorbed on the interface and interacted with WPI or SL via hydrophobic or electrostatic interactions determined by isothermal titration calorimetry. Our results suggest tocopherols are more applicable in WPI emulsion systems to achieve steady-state delivery of ALA., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

This study aimed to investigate the influences of microwave (MV) exposure to flaxseed on the physicochemical stability of oil bodies (OBs) focused on the interface remodeling. The results showed that the intracellular OBs subjected to absolute rupture and then partial dispersion by protein bodies visualized by TEM following MV exposure (1-5 min; 700 W). After aqueous extraction, native flax OBs manifested excellent spherical particles with completely intact surface and wide particle size distribution (0.5-3.0 μm) examined by cryo-SEM. Upon 1-5 min of MV exposure, the defective interface integrity and beaded morphology were successively observed for flax OBs, accompanied by the impaired physical stability and rheological behavior due to the newly assembled phospholipid/protein interface. Notably, the profitable migration of phenolic compounds effectively suppressed the lipid peroxidation and protein carbonylation in flax OBs. Thus, MV exposure (1-5 min; 700 W) was unfavorable for improving the physical stability of flax OBs., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Emulsified ω-3 polyunsaturated fatty acid have expanding application in different food matrix with improved water solubility while still prone to oxidation. Lotus seedpod proanthocyanidin (LSPC) was grafted to whey protein isolate (WPI) to create nature-derived antioxidant emulsifiers. 1 HNMR, SDS-PAGE and multiple spectrometry showed that the structure of protein was changed after grafting. DPPH and FRAP measurements showed that WPI-LSPC conjugate (90.53 ± 1.48% of DPPH scavenging, 691.85 ± 4.54 μg/mL for FRAP assay) possessed a much better antioxidant ability than WPI (17.06 ± 3.34% of DPPH scavenging, 10.43 ± 0.26 μg/mL for FRAP assay). Ultrasonic emulsification and DSC experiments showed that WPI-LSPC conjugate were more effective at forming and stabilizing the flaxseed oil emulsions than pure WPI, with higher thermostability. Likewise, low levels of primary and secondary oxidation products were formed for the conjugate than the pure protein in O/W systems after storage, again suggesting WPI-LSPC could be used as fine antioxidant emulsifiers in oxidizing delivery systems., (Copyright © 2020. Published by Elsevier Ltd.)

The influences of the different structural flaxseed lignans on flaxseed oil (FO) emulsions during storage and digestion were investigated, focusing on their interfacial behavior. From perspective of interface, more than 60% of secoisolariciresinol (SECO) and the acidic hydrolysates of flaxseed lignan macromolecule (FLEH) were located on the interface of FO emulsions. It improved the stability of FO emulsions both during storage and digestion by inhibiting of free radical penetration and improving their targeted antioxidative activity. By comparison, the secoisolariciresinol diglucoside (SDG) and the alkaline hydrolysates of flaxseed lignan macromolecule (FLE) largely located in the aqueous and exerted lower antioxidative efficiency in emulsions. Moreover, SDG, SECO, FLE and FLEH slowed down the digestive rate of FO in emulsions, which might be due to flaxseed lignans inhibited the activity of digestive enzymes. These findings suggested that the different structural flaxseed lignans had the potential as antioxidants in emulsions during storage and digestion., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Recent studies have shown that the high susceptibility of flaxseed oil nanoemulsions to lipid oxidation limits their incorporation into functional foods and beverages. For this reason, the impact of various flaxseed phenolic extracts on the physical and oxidative stability of flaxseed oil nanoemulsions was investigated. Flaxseed lignan extract (FLE) and secoisolariciresinol (SECO) exhibited antioxidant activity whereas secoisolariciresinol diglucoside (SDG) and p-coumaric acid (CouA) exhibited prooxidant activity in the flaxseed oil nanoemulsions. The antioxidant potential of flaxseed phenolics in the nanoemulsions was as follows: SECO < CouA < SDG ≈ FLE. Moreover, the antioxidant/prooxidant activity of the phenolics was also related to their free radical scavenging activity and partitioning in the nanoemulsions. Our results suggested that both SECO and FLE were good plant-based antioxidants for improving the stability of flaxseed oil nanoemulsions., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

In this study, a series of functional oils rich in feruloylated structured lipids (FSLs) was prepared by enzymatic transesterification of ethyl ferulate (EF) with triglycerides under ultrasound pretreatment. A conversion of more than 92.7% and controllable FSLs (3.1%-26.3%) can be obtained under the following conditions: 16% enzyme, substrate ratio 1:5 (oil/EF, mol/mol), 85 °C, ultrasound 1 h, pulse mode 3 s/3s (working/waiting), and 17.0 W/mL. Compared to conventional mechanical stirring, the activation energy decreased from 50.0 kJ/mol to 40.7 kJ/mol. The apparent kinetic constant increased by more than 13 times, and the time required for the maximum conversion reduced sharply from 20-60 h to 4-6h, which was the fastest rate for enzymatic synthesis of FSLs. The antioxidant activities of the functional oil significantly increased 1.0- to 8.1-fold more than that of the raw oil. The functional oil could be widely applied in various fields of functional foods., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

In this study, Candida lipolytica lipase (CLL) was immobilized on magnetic multi-walled carbon nanotubes (mMWCNTs) via hydrophobic and cation-exchange interaction. The resultant immobilized CLL showed much better thermal stability, biocatalyst activity and easier recycling than the free form. A method for efficient enzymatic acidolysis of tripalmitin (PPP) with oleic acid (OA), to produce OPO-rich TAGs, was developed, using the immobilized CLL as the biocatalyst. Under optimized conditions (2% water, 20mg/ml enzyme, 1:6 PPP/OA, 50°C, 2h), the content of OPO in the final product reached 46.5%. CLL@mMWCNTs had a better activity and manipulative stability than commercial lipases. More importantly, the feasibility of CLL@mMWCNTs was also validated in the practical production of OPO-rich TAGs, using lard and restructured palm oil as the raw material. These results suggest that CLL@mMWCNTs is a promising biocatalyst for the OPO-rich TAGs production and will be helpful for the infant formula industry., (Copyright © 2017 Elsevier Ltd. All rights reserved.)