Search

An electrochemical lateral flow immunoassay (eLFIA) strip with high reproducibility was developed to rapidly and accurately detect Streptococcus suis serotype 2. This proposed strip was fabricated by integrating ratiometric electrochemical detection and LFIA (R-eLFIA). The R-eLFIA exhibited excellent reproducibility, which was improved by 3.8 times compared to a single electrode. A dual-working screen-printed graphene electrode (SPGE) was designed by tuning the working electrode with electroactive species in the biosensing system. Ferrocene carboxylic acid (Fc) was used as a signal probe, and sunset yellow (SY) at one working electrode was used as an internal reference signal to provide a built-in correction for reducing the effects of inherent background current. S. suis serotype 2-specific antibodies were immobilized on a nitrocellulose membrane of LFIA, which is located on the position of Fc-SPGE. In the presence of the analyte, an immunocomplex formed on the region of Fc-SPGE, causing a decrease in Fc current while SY current remained constant. The current ratio's decrease was proportional to S. suis serotype 2's concentration. Under optimization, this biosensor showed good linearity in the range of 10 2 -10 10  CFU/mL with a limit of detection of 10 CFU/mL and achieved a rapid detection time (15 min). Moreover, the R-eLFIA biosensor exhibited excellent reproducibility and high selectivity and was applied in human serum samples. Thus, this study successfully matched the advantages of the ratiometric strategy and LFIA and has great potential to be used as an effective tool for rapidly detecting S. suis serotype 2 in clinical samples., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

In this work, we present the development of an immunosensor for the direct, selective, and sensitive determination of symmetric dimethylarginine (SDMA) in urine, in view of the emerging role of this molecule as a biomarker for renal disease. SDMA is almost completely excreted by the kidneys, hence in renal dysfunction, the excretion is decreased, resulting in accumulation in plasma. Reference values for plasma or serum have already been established in small animal practice. Values < 15 μg/dL are considered normal, 15-19 μg/dL are values of concern, and at values > 20 μg/dL kidney disease is likely. The proposed electrochemical paper-based sensing platform uses anti-SDMA antibodies for targeted detection of SDMA. Quantification is related to a decrease in the signal of a redox indicator due to the formation of an immunocomplex that interferes with electron transfer. Square wave voltammetry measurements showed a linear correlation of the peak decline for 50 nM - 1 μM SDMA with a detection limit of 15 nM. The influence of common physiological interferences caused no significant peak reduction, indicating excellent selectivity. The proposed immunosensor was successfully applied for the quantification of SDMA in human urine of healthy individuals. Surveillance of SDMA concentration in urine could prove to be very valuable in the diagnosis or monitoring of renal disease., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

Current method for identification of foodborne pathogens suffers from its relatively poor performance, consequently limiting its use. Herein, we first describe an ultrasensitive electrochemiluminescence (ECL) sensor based on nitrogen-decorated carbon dots (NCDs) for Listeria monocytogenes (L. monocytogenes) determination using a screen-printed carbon electrode (SPCE). Citric acid serves as carbon source, and ethylenediamine, a molecule containing nitrogen atom, is employed to synthesize CDs. Approximately 4 nm NCD with homogenous size distribution can be produced via a single step green microwave-assisted methodology. The construction of ECL sensor is initiated by the immobilization of capture antibody (Ab1) onto the carboxyl graphene (GOOH)-modified SPCE, where immunocomplexes (antigen and the NCD-labelled secondary antibody (Ab2-NCD)) are formed, resulting in a substantial increment in the ECL signal response in the presence of K 2 S 2 O 8 . The GOOH allows direct formation of the capture antibodies and enhances the electrochemical properties. Under optimal parameters, this sensor exhibits wide linearity (2 to 1.0 × 10 6  CFU mL -1 ), high sensitivity (0.104 or 1.0 × 10 -1  CFU mL -1 ) and specificity over the nontargeting studied pathogens and is successfully applied to determine L. monocytogenes in food products. These promising results together with its performance suggest that this proposed platform may serve as an alternative device to effectively control the spread of foodborne diseases., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is emerging as a global pandemic outbreak. To date, approximately one million deaths and over 32 million cases have been reported. This ongoing pandemic urgently requires an accurate testing device that can be used in the field in a fast manner. Serological assays to detect antibodies have been proven to be a great complement to the standard method of reverse transcription-polymerase chain reaction (RT-PCR), particularly after the second week of infection. We have developed a specific and sensitive immunosensor for immunoglobulin detection produced against SARS-CoV-2. Unlike other lateral flow-based assays (LFAs) involving the utilization of multiple antibodies, we have reported a label-free paper-based electrochemical platform targeting SARS-CoV-2 antibodies without the specific requirement of an antibody. The presence of SARS-CoV-2 antibodies will interrupt the redox conversion of the redox indicator, resulting in a decreased current response. This electrochemical sensor was proven effective in real clinical sera from patients with satisfactory results. In addition, the proposed format was also extended to antigen detection (the spike protein of SARS-CoV-2), which presents new possibilities for diagnosing COVID-19., (Copyright © 2020 Elsevier B.V. All rights reserved.)

A disposable gas-sensing paper-based device (gPAD) was fabricated in origami design which integrates the gas adsorbent and the electrochemical detection zone in a single device. The gPAD for the determination of NOx gas uses a screen-printed graphene electrode modified with copper nanoparticles (CuNP/SPGE) to achieve high sensitivity and selectivity. The gPAD detects both, NO and NO 2 (as NOx) with same current responses. The measurement could be performed directly through differential pulse voltammetry (DPV) with a detection limit as low as 0.23 vppm and 0.03 vppm with exposure times of 25 min and 1 h, respectively. The reproducibility in terms of relative standard deviation was less than 5.1% (n = 7 devices) at 25, 75 and 125 vppm NO 2 and the life-time of this device was more than 30 days. The gPAD was applied to detect NOx in air and exhaust gases from cars. In comparison with spectrophotometry, there are no significant differences between both methods using a paired t-test of the results on a 95% confidence level. The designed gPAD can provide a new template model for other gas sensors with features of disposability and portability for fieldwork analysis at low cost., (Copyright © 2019 Elsevier B.V. All rights reserved.)

We introduce for the first time a paper-based analytical device (PAD) for the non-enzymatic detection of glucose by modifying a screen-printed carbon electrode with cobalt phthalocyanine, graphene and an ionic liquid (CoPc/G/IL/SPCE). The modifying composite was characterized by UV-visible spectroscopy, energy dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The disposable devices show excellent conductivity and fast electron transfer kinetics. The results demonstrated that the modified electrode on PADs had excellent electrocatalytic activity towards the oxidation of glucose with NaOH as supporting electrolyte (0.1M). The oxidation potential of glucose was negatively shifted to 0.64V vs. the screen-printed carbon pseudo-reference electrode. The paper-based sensor comprised a wide linear concentration range for glucose, from 0.01 to 1.3mM and 1.3-5.0mM for low and high concentration of glucose assay, respectively, with a detection limit of 0.67µM (S/N = 3). Additionally, the PADs were applied to quantify glucose in honey, white wine and human serum. The disposable, efficient, sensitive and low-cost non-enzymatic PAD has great potential for the development of point-of-care testing (POCT) devices that can be applied in healthcare monitoring., (Copyright © 2017 Elsevier B.V. All rights reserved.)