Search

Herein, we implemented RNA-cleaving DNAzymes specific for the endogenous protein of breast cancer cells (MDA-MB -231) and programmed for electrochemical detection. Thionine-modified gold nanoparticles and modified magnetic nanoparticles are attached to the two ends of the DNAzyme molecule. The prepared probe is pulled to the surface of the electrode with the help of a magnetic field, and the signal caused by the electrochemical activity of thionine is observed on the surface of the electrode. The presence of a covalent gold nanoparticle-thionine hybrid as a highly electroactive/enhanced electrochemical label ensures a strong detection signal. After addition of the enzyme activator cofactor (MDA-MB -231 cytoplasmic cell protein), it reacts with the catalytic core of the enzyme sequence in the DNAzyme molecule and triggers the cleavage reaction in the substrate sequence of the DNAzyme molecule. During this process, the gold nanoparticle-thionine labels are detached from the probe and released into the solution. Inductive removal of gold nanoparticles leads to a decrease in the current related to the reduction of thionine on the electrode surface. The results show that this biosensor can detect this protein marker in the linear range of (1.0E-06 to 1.0E+01) pg/ml, with a detection limit (1.0129E-07 pg/ml), using differential pulse voltammetry as a measuring technique. As well as, electrochemical impedance spectroscopy (EIS)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

CRISPR/Cas systems have displayed remarkable potential in developing novel biosensing applications for nucleic acid detection owing to the collateral cleavage activity of Cas effector proteins (Cas12, Cas13, etc.). Despite tremendous progress in recent years, the existing CRISPR/Cas based biosensing platforms have several limitations, including reliance on proper amplification methods, expensive fluorescence detection equipment, or lateral flow biosensor (LFB). Herein, we report a simple, inexpensive, and ultrasensitive DNA probe based LFB with CRISPR/Cas and loop-mediated Isothermal Amplification (namely CIA). The concept behind this approach is a non-detectable test line on the LFB when the Cas effector protein collaterally cleaves the cognate target and an ssDNA reporter sequence. The CIA based LFB can detect as low as a single copy cloned Pseudomonas aeruginosa acyltransferase gene, 1 cfu/ml plasmid containing E. coli DH5α pure cultures, as well as clinical samples without DNA extraction/purification or advanced apparatuses. No cross-reactivity with other non-target bacteria was observed. The naked eye result readout was obtained in 15 min of LAMP amplification, 30 min of Cas12 reaction, and 5 min of LFB readout. This platform is robust and of low cost for on-site testing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

MicroRNAs play a crucial role in regulating gene expression and cellular function. Reliable detection of miRNA is highly demanded in clinical diagnosis and therapy. Herein, we designed a structure-convertible DNA switch and constructed a novel switch-conversional ratiometric fluorescence biosensor (SCRF biosensor) for highly sensitive miRNA detection by the use of amplicon fragments to convert the structure of the switch. The DNA switch was a sophisticated designed single-strand DNA with a stem-loop structure and modified with two fluorophores (Cy3 and Cy5) and one quencher at specific sites of the switch. Amplicon fragments (c*) were produced by an exponential amplification reaction. When the c* hybridized to the loop of a DNA switch, the structure of the switch would convert, and fluorescence resonance energy transfer occurred between Cy5 and Cy3. Then two fluorescence signals with different trends would be observed. As a result, by the ratio of the two signals, we can quantitatively and quickly detect the target miRNA with the concentration range from 100 fM to 100 nM and the excellent detection limit down to 70.9 fM, providing this new SCRF biosensor broad application prospects., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Biosensor development exploiting various transduction principles is characterized by a strong competition to reach high detectability, portability and robustness. Nevertheless, a literature-based comparison is not possible, as different conditions are employed in each paper. Herein, we aim at evaluating which measurement, photons or electrons, yields better biosensor performance. Upon outlining an update in recent achievements to boost analytical performance, amperometry and chemiluminescence (CL)-based biosensors are directly compared employing the same biospecific reagents and analytical formats. Horseradish peroxidase (HRP) and hydrogen peroxide concentrations were directly measured, while glucose and mouse IgG were detected employing an enzyme paper-based biosensor and an immunosensor, respectively. Detectability was down to picomoles of hydrogen peroxide (4 pmol for CL and 210 pmol for amperometry) and zeptomoles of HRP (45 zmol for CL and 20 zmol for amperometry); IgG was detected down to 12 fM (CL) and 120 fM (amperometry), while glucose down to 17 μM (CL) and 40 μM (amperometry). Results showed that amperometric and CL biosensors offered similar detectability and analytical performance, with some peculiarities that suggest complementary application fields. As they generally provided slightly higher detectability and wider dynamic ranges, CL-based biosensors appear more suitable for point-of-care testing of clinical biomarkers, where detectability is crucial. Nevertheless, as high detectability in CL biosensors usually requires longer acquisition times, their rapidity will allocate electrochemical biosensors in real-time monitoring and wearable biosensors. The analytical challenge demonstrated that these biosensors have competitive and similar performance, and between photons and electrons the competition is still open., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Electrochemical biosensors possess numerous desirable qualities for target detection, such as portability and ease of use, and are often considered for point-of-care (POC) development. Label-free affinity electrochemical biosensors constructed with semiconductor manufacturing technology (SMT)-produced electrodes and a streptavidin biomediator currently display the highest reproducibility, accuracy, and stability in modern biosensors. However, such biosensors still do not meet POC guidelines regarding these three characteristics. The purpose of this research was to resolve the limitations in reproducibility and accuracy caused by problems with production of the biosensors, with the aim of developing a platform capable of producing devices that exceed POC standards. SMT production settings were optimized and bioreceptor immobilization was improved through the use of a unique linker, producing a biosensor with exceptional reproducibility, impressive accuracy, and high stability. Importantly, the three characteristics of the sensors produced using the proposed platform all meet POC standards set by the Clinical and Laboratory Standards Institute (CLSI). This suggests possible approval of the biosensors for POC development. Furthermore, the detection range of the platform was demonstrated by constructing biosensors capable of detecting common POC targets, including circulating tumor cells (CTCs), DNA/RNA, and curcumin, and the devices were optimized for POC use. Overall, the platform developed in this study shows high potential for production of POC biosensors., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier B.V.)

A robust amperometric sensor was developed for the lactate detection in the extracellular matrix of cancer cells. The sensor was fabricated by separately immobilizing nicotinamide adenine dinucleotide (NAD + ) onto a carboxylic acid group and lactate dehydrogenase (LDH) onto an amine group of bi-functionalized conducting polymer (poly 3-(((2,2':5',2″-terthiophen)-3'-yl)-5-aminobenzoic acid (pTTABA)) composited with N, S-doped porous carbon. Morphological features of the composite layer and sensor performance were investigated using FE-SEM, XPS, and electrochemical methods. The experimental parameters were optimized to get the best results. The calibration plot showed a linear dynamic range between 0.5 μM and 4.0 mM with the detection limit of 112 ± 0.02 nM. The proposed sensor was applied to detect lactate in a non-cancerous (Vero) and two cancer (MCF-7 and HeLa) cell lines. Among these cell lines, MCF-7 was mostly affected by the administration of lactate transport inhibitor, α-cyano-4-hydroxycinnamate (αCHC), followed by HeLa and Vero, respectively. Furthermore, the effect of αCHC concentration and treatment time on the lactate level in the cell lines were demonstrated. Finally, cytotoxicity studies were also performed to evaluate the effect of αCHC on cell viability., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Piezoresistive sensors become increasingly important in wearable devices, specifically sensors printed with piezoresistive inks. The electrical viscosity of these sensors causes phenomena such as stress relaxation, creep and hysteresis. This compromises sensor calibration and leads to inaccurate results. When subjecting a sensor to loading and unloading, the subsequent calculation of the fractional time derivative of the conductance leads to the elimination of the hysteresis. The order of the fractional derivative equals the magnitude of the sensor's viscosity. In our study, the viscosity of several pressure sensors was determined with a material testing machine and ranged from 0.55% to 22.35%. We found that shunt-mode sensors are less viscous than through-mode sensors. In addition, if a viscous material is placed on top of the sensor, then its viscosity increases. This is important as some calibration devices for pressure sensor arrays use rubber bladders which are viscous. From the perspective of manufacturing, the variation of the viscosity across a sensor array accounts for the quality of the pressure sensor mat and should be kept to a minimum. An industry standard is proposed that calculates and reports the sensor viscosity based on loading and unloading of the sensor and calculating the fractional time derivative of the conductance, whose fractional order reduces the pressure - conductance hysteresis to zero and thereby corresponds to the sensor's viscosity., (Copyright © 2019. Published by Elsevier B.V.)

A novel portable fiber optical chemiluminescent biosensor (FOCB) system was successfully constructed using fiber optic bio-probe as biorecognition element as well as transducer and a Si-based photodiode detector (PD-3000). The compact design of FOCB with free magnetic beads and photomultiplier allows it to be portable and suitable for on-site and automatic detection of targets, as well as to be cost-effective and small sample volume (only 40.0 µL). The sensitivity of 5 fW could be obtained for the FOCB due to the high performance of PD-3000 and no background light signal. Next, the FOCB was applied for the CL-based detection of microcystin-LR (MC-LR) in water using hapten-carrier protein conjugates modified fiber optic bio-probe as biorecognition element. Based on indirect competitive sandwich-like CL immunoassay principle, the highly sensitive detection of MC-LR was achieved using FOCB system. Under optimal conditions, the limit of detection for MC-LR is 0.03 µg/L, which is comparable with that of most reported MC-LR immunoassay methods. The robustness of the hapten-carrier protein-modified biosensor surface allowed multiple MC-LR immunoassays without any significant loss of performance, which ensured accurate and cost-effective detection results. The proposed strategy demonstrated good recovery, precision, and accuracy through the evaluation of the spiked water samples. The FOCB system can be readily extended toward the on-site real-time sensitive detection of other targets in the field of environment, food, and medical diagnosis., (Copyright © 2018 Elsevier B.V. All rights reserved.)

There is a great need to track the selectivity of anticancer drug activity and to understand the mechanisms of associated biological activity. Here we focus our studies on the specific NQO1 bioactivatable drug, ß-lapachone, which is in several Phase I clinical trials to treat human non-small cell lung, pancreatic and breast cancers. Multi-electrode chips with electrochemically-active DNA monolayers are used to track anticancer drug activity in cellular lysates and correlate cell death activity with DNA damage. Cells were prepared from the triple-negative breast cancer (TNBC) cell line, MDA-MB-231 (231) to be proficient or deficient in expression of the NAD(P)H:quinone oxidoreductase 1 (NQO1) enzyme, which is overexpressed in most solid cancers and lacking in control healthy cells. Cells were lysed and added to chips, and the impact of β-lapachone (β-lap), an NQO1-dependent DNA-damaging drug, was tracked with DNA electrochemical signal changes arising from drug-induced DNA damage. Electrochemical DNA devices showed a 3.7-fold difference in the electrochemical responses in NQO1+ over NQO1- cell lysates, as well as 10-20-fold selectivity to catalase and dicoumarol controls that deactivate DNA damaging pathways. Concentration-dependence studies revealed that 1.4 µM β-lap correlated with the onset of cell death from viability assays and the midpoint of DNA damage on the chip, and 2.5 µM β-lap correlated with the midpoint of cell death and the saturation of DNA damage on the chip. Results indicate that these devices could inform therapeutic decisions for cancer treatment., (Copyright © 2018 Elsevier B.V. All rights reserved.)

In this study, a novel electrochemical sensing strategy was developed based on nontarget-induced bridge assembly and aptamer (Apt) extension reaction triggered by terminal deoxynucleotidyl transferase (TdT). Bisphenol A (BPA) was chosen as the target analyte to study the analytical performance of the designed aptasensor. This sensing system takes advantages of electrochemical sensing platforms and detection of an ultra-low level of BPA, due to the formation of bridge on the surface of electrode in the absence of BPA. In the presence of BPA, Apt/BPA complex is formed and inhibits the access of TdT to the 3'-end of Apt, resulting in the lack of bridge assembly and high access of [Fe(CN) 6 ] 3-/4- as redox agent to the electrode surface. Thus, a strong redox peak is observed. This aptasensor enabled the selective detection of BPA with the wide linear range of 0.08-15 nM and detection limit as low as 15 pM. Furthermore, the presented sensing platform was successfully applied for the detection of BPA in tap water and grape juice samples., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Molecular imprinting is an efficient technology to create artificial receptors with antibody-like binding properties for a variety of applications such as separation and sensing. In this work, a new sensing method was introduced by combining a two-dimensional molecularly imprinted polymer (2D-MIP) film with copper oxide nanoparticles (CuO NPs) labeling for signal conversion and amplification. CuO labeling can effectively monitor the thickness of 2D-MIPs to achieve the best imprinting effect. Trypsin imprinted polymer based electrochemical sensor on 96-well microplates was constructed and a good dynamic response was observed in the range of 0.5-500 ng/mL. Furthermore, detections of trypsin in fetal bovine serum were demonstrated using the imprinted polymer thin films. Our electrochemical sensors possess an excellent specificity, fast kinetics, high sensitivity and low cost, which have great potential in biological analysis., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Protein kinases play a critical role in regulation of intracellular signal transduction, whose aberrant expression is closely associated with various dangerous human diseases. In this paper, we propose a feasible electrochemical assay of intracellular kinase by incorporating peptide nanoprobe-assisted signal labeling and signal amplification. Protein kinase A (PKA)-specific peptide P1 is self-assembled on the surface of a gold electrode, serine of which could be phosphorylated with catalysis of PKA in the presence of adenosine-5'-triphosphate (ATP). Another artificial peptide P2 contains a short template for preparation of copper nanoparticles-based nanoprobe (P2-CuNPs) and provides arginine residues for specific recognition of phosphorylation site. After PKA-catalyzed phosphorylation, phosphorylated P1 specially binds with P2-CuNPs through ultra-stable phosphate-guanidine interaction, and thus results in amplified electrochemical response from surface-attached CuNPs. Our method demonstrates a satisfactory sensitivity toward PKA detection with a detection limit of 0.0019 U/mL, which is also successfully applied in intracellular PKA assay and inhibitory study with high specificity comparable to ELISA. Therefore, the facile method suggests a promising potential use in kinase-related biochemical fundamental research, disease diagnosis and drug discovery in the future., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Vertically aligned carbon nanotube array (VANTA) coatings have recently garnered significant attention due in part to their unique material properties including light absorption, chemical inertness, and electrical conductivity. Herein we report the first use of VANTAs grown via chemical vapor deposition in a 2D interdigitated electrode (IDE) footprint with a high height-to-width aspect ratio (3:1 or 75:25 µm). The VANTA-IDEs were functionalized with an antibody (Ab) specific to the human cancerous inhibitor PP2A (CIP2A)-an oncoprotein that is associated with a variety of malignancies such as oral, breast, and multiple myeloma cancers. The resultant label-free immunosensor was capable of detecting CIP2A across a wide linear sensing range (1-100 pg/mL) with a detection limit of 0.24 pg/mL within saliva supernatant-a range that is more sensitive than the corresponding CIP2A enzyme linked immunosorbent assay (ELISA). These results help pave the way for rapid cancer screening tests at the point-of-care (POC) such as for the early-stage diagnosis of oral cancer at a dentist's office., (Copyright © 2018 Elsevier B.V. All rights reserved.)

In this work, a novel approach that can calibrate the colors obtained with a cellphone camera was proposed for the colorimetric sensor array. The variations of ambient light conditions, imaging positions and even cellphone brands could all be compensated via taking the black and white backgrounds of the sensor array as references, thereby yielding accurate measurements. The proposed calibration approach was successfully applied to the detection of glucose in urine by a colorimetric sensor array. Snapshots of the glucose sensor array by a cellphone camera were calibrated by the proposed compensation method and the urine samples at different glucose concentrations were well discriminated with no confusion after a hierarchical clustering analysis., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The objective of the study has been the development of a new sensing platform, called Real-time Electrochemical Profiling (REP) that relies on real-time electrochemical immunoassay detection. The proposed REP platform consists of new electrode arrays that are easy to fabricate, has a small imprint allowing microfluidic system integration, enables multiplexed amperometric measurements and performs well in terms of electrochemical immunoassay detection as shown through the deoxynivalenol detection assays. The deoxynivalenol detection has been conducted according to an optimised REP assay protocol using deoxynivalenol standards at varying concentrations and a standard curve was obtained (y=-20.33ln(x)+124.06; R(2)=0.97) with a limit of detection of 6.25 ng/ml. As both ELISA and REP detection methods use horse radish peroxidase as the label and 3.3',5.5'-Tetramethylbenzidine as the substrate, the performance of the REP platform as an ELISA reader has also been investigated and a perfect correlation between the deoxynivalenol concentration and the current response was obtained (y=-14.56ln(x)+101.02; R(2)=0.99). The calibration curves of both assays have been compared to conventional ELISA tests for confirmation. After assay optimisation using toxin spiked buffer, the deoxynivalenol detection assay has also been performed to detect toxins in wheat grain., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Physiological studies require sensitive tools to directly quantify transport kinetics in the cell/tissue spatial domain under physiological conditions. Although biosensors are capable of measuring concentration, their applications in physiological studies are limited due to the relatively low sensitivity, excessive drift/noise, and inability to quantify analyte transport. Nanomaterials significantly improve the electrochemical transduction of microelectrodes, and make the construction of highly sensitive microbiosensors possible. Furthermore, a novel biosensor modality, self-referencing (SR), enables direct measurement of real-time flux and drift/noise subtraction. SR microbiosensors based on nanomaterials have been used to measure the real-time analyte transport in several cell/tissue studies coupled with various stimulators/inhibitors. These studies include: glucose uptake in pancreatic β cells, cancer cells, muscle tissues, intestinal tissues and P. Aeruginosa biofilms; glutamate flux near neuronal cells; and endogenous indole-3-acetic acid flux near the surface of Zea mays roots. Results from the SR studies provide important insights into cancer, diabetes, nutrition, neurophysiology, environmental and plant physiology studies under dynamic physiological conditions, demonstrating that the SR microbiosensors are an extremely valuable tool for physiology research., (Copyright © 2012 Elsevier B.V. All rights reserved.)

High throughput analyses in biochemical assays are gaining popularity in the post-genomic era. Multiple label-free detection methods are especially of interest, as they allow quantitative monitoring of biomolecular interactions. It is assumed that the sensor surface is stable to the surrounding medium while the biochemical processes are taking place. Using the Interferometric Reflectance Imaging Sensor (IRIS), we found that buffers commonly used in biochemical reactions can remove silicon dioxide, a material frequently used as the solid support in the microarray industry. Here, we report 53 pm to 731 pm etching of the surface silicon oxide over a 12-h period for several different buffers, including various concentrations of SSC, SSPE, PBS, TRIS, MES, sodium phosphate, and potassium phosphate buffers, and found that PBS and MES buffers are much more benign than the others. We observe a linear dependence of the etch depth over time, and we find the etch rate of silicon dioxide in different buffers that ranges from 2.73±0.76 pm/h in 1M NaCl to 43.54±2.95 pm/h in 6×SSC. The protective effects by chemical modifications of the surface are explored. We demonstrate unaccounted glass etching leading to erroneous results with label-free detection of DNA microarrays, and offer remedies to increase the accuracy of quantitative analysis., (Copyright © 2012 Elsevier B.V. All rights reserved.)

A direct, label-free immunosensor was designed for the rapid detection and quantification of staphylococcal enterotoxin A (SEA) in buffered solutions using quartz crystal microbalance with dissipation (QCM-D) as transduction method. The sensing layer including the anti-SEA antibody was constructed by chemisorption of a self-assembled monolayer of cysteamine on the gold electrodes placed over the quartz crystal sensor followed by activation of the surface amino groups with the rigid homobifunctional cross-linker 1,4-phenylene diisothiocyanate (PDITC) and covalent linking of binding protein (protein A or protein G). Four anti-SEA antibodies (two of which from commercial source) have been selected to set up the most sensitive detection device. With the optimized sensing layer, a standard curve for the direct assay of SEA was established from QCM-D responses within a working range of 50-1000 or 2000 ngml(-1) with a detection limit of 20 ngml(-1). The total time for analysis was 15 min. Using a sandwich type assay, the response was ca. twice higher and consequently the lowest measurable concentration dropped down to 7 ngml(-1) for a total assay time of 25 min., (Copyright © 2011 Elsevier B.V. All rights reserved.)

A thionine-modified carbon paste electrode for catechol and Bisphenol A (BPA) detection is presented. Graphite powder was modified by adsorbing thionine as electrochemical mediator. The electrochemical response of the modified carbon paste electrode (CPE) was determined before electrode modification with tyrosinase. Then, tyrosinase was added in order to assemble a biosensor. Once established the best operative conditions, an interelectrode reproducibility around 7% was obtained and the resulting biosensor showed improved sensitivities and (S=139.6+/-1.1 nA/microM for catechol and S=85.4+/-1.5 nA/microM for BPA) in comparison with the biosensor constructed without thionine (S=104.4+/-0.5 nA/microM for catechol and S=51.1+/-0.6 nA/microM for BPA) and low detection limits (0.15 microM for both the electrodes and analytes). Also the comparison with the results reported in the literature showed higher sensitivity and lower detection limit for our biosensor. Moreover the functioning of the thionine-tyrosinase CPE was validated following a biodegradation process of water polluted by BPA and comparing the time changes of BPA concentration inferred by the biosensor calibration curve and those determined by means of HPLC measurements., (2010 Elsevier B.V. All rights reserved.)

There is increased interest in the investigation and implementation of rapid screening methods for detection of pesticide residues. This study reports development of an immunostrip test for thiabendazole detection based on indirect competitive principle using carbon particles as a label. Nitrocellulose membrane strip was coated with a thiabendazole-protein conjugate in the defined test zone. In flow of an antibody-carbon complex and thiabendazole along the strip, the intensity of black colour formed in the test line reflected the thiabendazole concentration and semi-quantitative estimation could be carried out visually. The optimized test was accomplished within 10 min and the visual detection limit was achieved 0.25 ng mL(-1) of standard sample. Moreover, immunostrip was evaluated quantitatively using scanning densitometry. Based on standard curve, the detection limit of the proposed test was as low as 0.08+/-0.03 ng mL(-1) with an IC(50) value of 0.60+/-0.08 ng mL(-1) and a linear working range of 0.11-4.13 ng mL(-1). Results of testing precision, stability, and specificity demonstrated that the assay provided a reliable performance. This immunostrip was applied to analysis of spiked fruit juices in range of 0.05-5 mg L(-1). Matrix interferences were avoided by simple dilution of samples. Both visual and instrumental evaluations indicated a good agreement with results obtained by ELISA. Recoveries from juices were from 81.9 to 123.6% and relative standard deviations ranged from 9.9 to 19.3%. The developed strip offers potential as a useful rapid and simple method for screening of thiabendazole in fruit juices at levels far below the maximum residue limits., (2010 Elsevier B.V. All rights reserved.)

A novel electrochemical immunosensor for determination of ferritin in serum has been proposed. The immunosensor was prepared by immobilizing ferritin antibody (FeAb) on a glassy carbon electrode (GCE) based on agarose hydrogel. The modification procedure of the immunosensor was characterized by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The effects of amount of FeAb, incubation time and temperature on the immunosensor were explored to provide optimum analytical performance. The determination of ferritin was based on the change in DPV response before and after the antibody (Ab)-antigen (Ag) reaction. Tests result indicated that FeAb in the device microenvironment had biological activity. The detection limit for ferritin was 1.5 x 10(-5) g l(-1) and the linear range was 5-50 x 10(-5) g l(-1) with a correlation coefficient of 0.996. The storage stability was acceptable in pH 7.0 phosphate buffer saline (PBS) solution at 4 degrees C for 10 days. The proposed immunosensor provides a new promising method for the clinical immunoassay of ferritin.

A surface plasmon resonance (SPR) sensor probe with integrated reference surface is described. In order to fabricate the integrated reference surface, two dielectric layers with different thickness were deposited on the single gold SPR sensor surface via plasma polymerization of hexamethyldisiloxane. The working sensor surface was a 34 nm dielectric layer with immobilized bovine serum albumin (BSA) antigen and an adjacent thin 1 nm dielectric layer without BSA provided reference surface. A specific immunoreaction of anti-BSA antibody was detected after immersion of the SPR probe into sample solution. Simultaneous observation of reference and working surface response enabled determination of the immunoreaction without the need for the baseline measurement. Moreover, compensation of nonspecific adsorption could be confirmed using anti-human serum albumin antibody.

The function of the recently described viscometric affinity sensor (VAS), which measures glucose due to its strong effect on the viscosity of a sensitive liquid containing Concanavalin A (ConA) and dextran, was analysed for osmotic and colloid-osmotic effects on the glucose reading. The suction of low- and high-molecular weight osmotica on the membrane of the microdialysis fibre was measured using a membrane osmometer built from the microdialysis probe of the VAS. The reduction of the sensor read-out in blood plasma can be completely explained by a change in small osmotic volume fluxes through the dialysis membrane, which affect the ConA concentration and the viscosity after the flow of the sensitive liquid through the dialysis probe. The measuring error could be prevented by the presence of the polyethylene glycol 6000 at an isotonic concentration in the glucose standard solutions used for sensor calibration.

This paper is presented as an overview of the pathogen detection industry. The review includes pathogen detection markets and their prospects for the future. Potential markets include the medical, military, food, and environmental industries. Those industries combined have a market size of $563 million for pathogen detecting biosensors and are expected to grow at a compounded annual growth rate of 4.5%. The food market is further segmented into different food product industries. The overall food-pathogen testing market is expected to grow to $192 million and 34 million tests by 2005. The trend in pathogen testing emphasizes the need to commercialize biosensors for the food safety industry as legislation creates new standards for microbial monitoring. With quicker detection time and reusable features, biosensors will be important to those interested in real time diagnostics of disease causing pathogens. As the world becomes more concerned with safe food and water supply, the demand for rapid detecting biosensors will only increase.

A highly sensitive and rapid food-screening test based on disposable screen-printed biosensors was developed, which is suitable for monitoring infant food. The exposure of infants and children to neurotoxic organophosphates and carbamates is of particular concern because of their higher susceptibility to adverse effects. The European Union has, therefore, set a very low limit for pesticides in infant food, which must not contain concentrations exceeding 10 microg/kg for any given pesticide. The maximum residue limit (MRL) has been set to be near the determination threshold that is typically achieved for pesticides with traditional analytical methods. The biosensor method could detect levels lower than 5 microg/kg and thus clearly fulfills the demands of the EU. To substantiate these measurements, recovery rates were determined and amounted on average to 104% in food. Matrix effects were eliminated by the introduction of a special electrode treatment. The test was compared with two traditional pesticide multiresidue analysis methods (GC-MS, LC-MS) using 26 fruit and vegetable samples from local markets and 23 samples of processed infant food from Germany, Spain, Poland and USA. Three infant food samples exceeded the MRL of 10 microg/kg when analyzed by either biosensor test or multiresidue methods.

The thickness shear mode (TSM)-sensor responds to changes of mechanical properties of the material contacting the surface of the sensor. One of the material properties is the viscosity of a liquid. Abiosensor based on the TSM-resonator for the detection of endotoxin has been developed. It exploits the viscosity-density change during the reaction of endotoxin with limulus amebocyte lysate (LAL). The effect of surface properties of the sensor has been investigated to achieve better output signals. It is shown that the sensor requires a hydrophilic surface to get a better coupling between the sensor and the LAL-endotoxin solution. The TSM biosensor is able to detect an endotoxin concentration as low as 100 fg/ml by using only 50-microl standard LAL solution. The disadvantages of reusable sensors, such as the contamination from previous measurement of endotoxin and the cost of the regeneration or reclining processes of the sensor, have been eliminated by using a cost effective disposable TSM-sensor.

A new method for biosensor calibration and data processing, allowing the prediction of steady state parameters from the analysis of transient response curves (Rinken et al., 1996. Analytical Letters 29, 859), has been evaluated in the case of an oxygen sensor based two-substrate enzyme electrode for glucose determination. The electrochemical glucose biosensor was prepared by covering the surface of oxygen sensor with glucose oxidase (EC 1.1.3.4) immobilized in nylon mesh. This decreased the oxygen flow to the sensor in the presence of glucose and resulted in time-dependent decrease of the biosensor signal. Except the lag period of the response in the beginning of the assay, the oxygen consumption by the immobilized enzyme was described by an exponential function: [formula: see text] The parameter C, which corresponded to the steady-state output of the biosensor, was found to be the most suitable for glucose determination. The non-linear fitting for data of over 1000 independent experiments to the equation above always revealed correlation coefficients greater than 0.97. The calculation of the steady state parameter from the transient phase data makes the analysis fast and precise, especially for sensors with thick membranes, being convenient to use in the case of enzyme electrodes. The theoretical essence of the parameter C also gives valuable information for the optimal design of biosensors.

Amperometric biosensors register oxygen depletion in response to analyte catabolism, and thus are limited by the availability of dissolved oxygen. Microbial sensors containing immobilized cells of Gluconobacter oxydans were hyperoxygenated to 400% of control levels and the effects on sensor responses to glucose were determined. Oxygenated perfluorodecalin (a completely fluorinated organic substance) was as effective in hyperoxygenation as direct sparging with O2, increasing sensor base medium oxygen concentrations from 9.3 to 37 mg/l. Hyperoxygenation enhanced maximal biosensor response amplitudes, particularly at high cell loading densities. Maximal response rates were also improved, although less dramatically. Results suggest that hyperoxygenation may be a new general approach for modulating biosensor responses.

A glucose-sensing enzyme electrode was prepared by incorporating polyethylene glycol-modified glucose oxidase, horseradish peroxidase and 1,1'-dimethylferrocene into a carbon paste. The modification of glucose oxidase with polyethylene glycol was effective for increasing the enzyme activity in the carbon paste owing to the enhanced affinity of the polyethylene glycolmodified enzyme for the hydrophobic carbon paste matrix. In contrast, however, the enzyme activity of the polymer-modified peroxidase was lower than the unmodified peroxidase in the carbon paste matrix because of a severe loss of the enzyme activity during the modification with polyethylene glycol. Hence, the enzyme pair of polyethylene glycol-modified glucose oxidase and unmodified peroxidase was used for preparing the enzyme electrode. The reductive current response of the electrode to glucose was recorded at -0.2 V vs. Ag/AgCl. After the addition of glucose (100 microM), the current increased immediately and reached a plateau (delta = -0.12 microA) within 30 s. The current response was linear up to a glucose concentration of 500 microM and the detection limit was 20 microM (S/N = 5). Interference from ascorbate was very small: the current response to 1 mM glucose (-1.1 microA) was slightly reduced to -0.9 microA when 1 mM ascorbate was added to the glucose-containing solution. In biological and food samples, the concentration of ascorbate is generally quite low compared with the glucose concentration. The interference from ascorbate could actually be ignored for the purpose of determining glucose in soft drinks.