Search

Foreign body response (FBR), inflammation, and fibrotic encapsulation of neural implants remain major problems affecting the impedance of the electrode-tissue interface and altering the device performance. Adhesion of proteins and cells (e.g., pro-inflammatory macrophages, and fibroblasts) triggers the FBR cascade and can be diminished by applying antifouling coatings onto the implanted devices. In this paper, we report the deposition and characterization of a thin (±6 nm) sulfobetaine-based coating onto microfabricated platinum electrodes and cochlear implant (CI) electrode arrays. We found that this coating has stable cell and protein-repellent properties, for at least 31 days in vitro, not affected by electrical stimulation protocols. Additionally, its effect on the electrochemical properties relevant to stimulation (i.e., impedance, charge injection capacity) was negligible. When applied to clinical CI electrode arrays, the film was successful at inhibiting fibroblast adhesion on both the silicone packaging and the platinum/iridium electrodes. In vitro, in fibroblast cultures, coated CI electrode arrays maintained impedance values up to five times lower compared to non-coated devices. Our studies demonstrate that such thin sulfobetaine containing layers are stable and prevent protein and cell adhesion in vitro and are compatible for use on CI electrode arrays. Future in vivo studies should be conducted to investigate its ability to mitigate biofouling, fibrosis, and the resulting impedance changes upon long-term implantation in vivo., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

To overcome the problems of refractive index matching and increased disorder when working with traditional heterostructure colloidal photonic crystals (CPCs) with dual or multiple photonic bandgaps (PBGs) for fluorescence enhancement in water, we propose the use of a chemical heterostructure in hollow sphere CPCs (HSCPCs). A partial chemical modification of the HSCPC creates a large contrast in wettability to induce the heterostructure, while the hollow spheres increase the refractive index difference when used in aqueous environment. With the platform, fluorescence enhancement reaches around 160 times in solution, and 72 times (signal-to-background ratio ~7 times) in cells during proof-of-concept live cardiomyocyte contractility experiments. Such photonic platform can be further exploited for chemical sensing, bioassays, and environmental monitoring. Moreover, the introduction of chemical heterostructures provides new design principles for functionalized photonic devices., (Copyright © 2021 Elsevier B.V. All rights reserved.)

We report on a novel biomimetic sensor that allows sensitive and specific detection of Escherichia coli (E. coli) bacteria in a broad concentration range from 10 2 up to 10 6  CFU/mL in both buffer fluids and relevant food samples (i.e. apple juice). The receptors are surface-imprinted polyurethane layers deposited on stainless-steel chips. Regarding the transducer principle, the sensor measures the increase in thermal resistance between the chip and the liquid due to the presence of bacteria captured on the receptor surface. The low noise level that enables the low detection limit originates from a planar meander element that serves as both a heater and a temperature sensor. Furthermore, the experiments show that the presence of bacteria in a liquid enhances the thermal conductivity of the liquid itself. Reference tests with a set of other representative species of Enterobacteriaceae, closely related to E. coli, indicate a very low cross-sensitivity with a sensor response at or below the noise level., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The investigation of single-neuron parameters is of great interest because many aspects in the behavior and communication of neuronal networks still remain unidentified. However, the present available techniques for single-cell measurements are slow and do not allow for a high-throughput approach. We present here a CMOS compatible microelectrode array with 84 electrodes (with diameters ranging from 1.2 to 4.2 μm) that are smaller than the size of cell, thereby supporting single-cell addressability. We show controllable electroporation of a single cell by an underlying electrode while monitoring changes in the intracellular membrane potential. Further, by applying a localized electrical field between two electrodes close to a neuron while recording changes in the intracellular calcium concentration, we demonstrate activation of a single cell (∼270%, DF/F(0)), followed by a network response of the neighboring cells. The technology can be easily scaled up to larger electrode arrays (theoretically up to 137,000 electrodes/mm(2)) with active CMOS electronics integration able to perform high-throughput measurements on single cells., (Copyright © 2010 Elsevier B.V. All rights reserved.)

Neurotransmitter release is the key factor of chemical messaging in the brain. Fast, sensitive and in situ detection of single cell neurotransmitter release is essential for the investigation of synaptic transmission under physiological or pathophysiological conditions. Although various techniques have been developed for detecting neurotransmitter release both in vitro and in vivo, the sensing of such events still remains challenging. First of all, the amount of neurotransmitter released during synaptic transmission is unknown because of the limited number of molecules released and the fast diffusion and reuptake of these molecules after release. On the other hand, advances in microelectronic biosensor devices have made possible the fast detection of various analytes with high sensitivity and selectivity. Specifically, enzyme-modified field-effect (ENFET) devices are attractive for such applications due to their fast response, small dimensions and the possibility to integrate a large number of sensors on the same chip. In this paper, we present a floating-gate FET device coated with glutamate oxidase (GLOD) layer. The surface chemistry was optimized for maximal enzyme loading and long-term stability, and characterized by quartz crystal microbalance and colorimetric assays. Enzyme loading was largest on poly-L-lysin-based surfaces combined with glutaraldehyde. The surface chemistry showed excellent stability for at least one month in Tris buffers stored at 4 degrees C. A glutamate detection limit of 10(-7) M has been obtained with the GLOD-coated FET and our sensor proved to be selective to glutamate only. We show that this biosensor is a promising tool for the in vitro detection of glutamate and can be extended to other neurotransmitters.