Search

Objectives: The idea to aim for an "individualized" alignment, whereby the constitutional alignment is restored, has gained much interest among knee surgeons. This requires insight into the prediseased, natural alignment of our patients' knees. The aim of this study is (1) to determine how the hip-knee-ankle (HKA) angle is influenced during the arthritic process and (2) to investigate the correlation between joint line changes and the progression of osteoarthritis (OA). It is our hypothesis that the most pronounced coronal parameter changes appear at the proximal tibia and at the joint line., Methods: One hundred sequential full-length X-rays with a minimum follow-up of 1 year were retrospectively reviewed from a radiographic joint database. Patients had to be at least 50 years of age needed to have an HKA angle of more than 1.3° varus to be included. Patients with ipsilateral total hip arthroplasty, femoral or tibial fracture, osteotomy, or ligamentous repair were excluded. Fifteen alignment parameters were investigated on the sequential full-length X-rays. Moreover, the relationship between the alignment parameters and the Kellgren-Lawrence grade (KL grade) was determined by using linear mixed models., Results: A progressive KL grade is associated with an increase of the HKA (p < 0.001). Mostly, HKA differs due to decrease of the medial tibial plateau (MPTA) angle (0.93°) and an increase of the joint line angle (JLCA) (0.86°). The mLDFA demonstrated the most pronounced changes in the beginning of OA (KL grade 1-2) (p = 0.049). In particular, the MPTA becomes considerably smaller (p = 0.004) in the later stage of OA (KL grade 3). Also, a progressive increase of the JLCA (p < 0.001) is observed upwards of KL grade 3., Conclusion: By comparing consecutive full-length X-rays in the same patients, it is possible to define the coronal alignment changes during the arthritic process. The HKA angle increases according the arthritic progression, whereby the most pronounced changes appear at the proximal tibia (MPTA) and at the joint line (JLCA).The alignment changes in varus OA knees can be divided in three stadia: (1) erosion of the distal medial femoral condyle, (2) erosion of the medial tibial plateau, and (3) a progressive increase of the joint line angle., Level of Evidence: Therapeutic Study, Level III., (Copyright © 2023 The Author(s). Published by Elsevier Inc. All rights reserved.)

Background: Single-leg hop tests are commonly performed in the forward direction to evaluate functional performance. However, athletes move in multiple directions during pivoting sports. The first aim of this study was to examine test-retest reliability of single-leg hop tests in the forward, medial and rotational direction in non-injured athletes. Second, the discriminative ability to detect leg asymmetries with these hop tests in anterior cruciate ligament (ACL) reconstructed athletes was determined., Methods: Sixteen recreational non-injured participants (eight females, eight males; 22.4 ± 1.9 years) were tested twice (one-week interval) and performed the single hop for distance (SH), triple hop for distance (TH), medial side triple hop for distance (MSTH) and 90° medial rotation hop for distance (MRH). Intraclass correlation coefficients (ICCs), standard errors of measurement (SEM) and smallest detectable differences (SDD) were calculated. Discriminative ability was determined in 32 ACL-reconstructed participants (four females, 28 males; 24.4 ± 4.6 years; six months postoperative) who performed the same hop tests once., Results: The ICCs ranged between 0.93 and 0.98. The SEM and SDD were respectively 2.6-4.1% and 7.2-11.3% of the mean hop distance of the group. The proportion (%) of ACL-reconstructed participants passing the ≥90% limb symmetry cut-off was 62.5 (SH), 59.4 (TH), 40.6 (MSTH) and 46.9 (MRH)., Conclusion: Excellent test-retest reliability of forward, medial and rotational hop tests was found. This allows clinicians to make informed interpretations of changes in hop test distances when retesting athletes. Medial and rotational hop tests are more likely to show limb asymmetries in ACL-reconstructed participants compared to forward hop tests., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Background: To assess the risk of tunnel collision in combined anterior cruciate ligament (ACL) and anterolateral ligament (ALL) reconstructions., Methods: Three-dimensional (3D) CT reconstructions of 32 knees after transtibial (TT) (N = 16) or anteromedial portal (AMP) (N = 16) ACL reconstruction were used to simulate potential tunnel collision of the femoral ACL tunnel if combined with a virtual ALL reconstruction. The minimal distance between tunnels, the ALL tunnel length, and the lateral femoral condyle (LFC) width were measured. Moreover, the relationship between the ALL tunnel and the intercondylar notch, trochlear groove and posterior femoral cortex was determined., Results: The highest rate of tunnel collision (81%) was observed when the ALL tunnel was aimed at 20° in the coronal plane and 0° in the axial plane. However, by aiming the ALL tunnel at 0° coronal and 40° axial angulation, collision was avoided in all patients and no violation of the trochlea was observed. Tunnel collision rate was significantly higher (P = 0.002) when the ACL tunnel was drilled by the AMP technique., Conclusions: Risk of tunnel collision was significantly increased when the tunnel was drilled at 0° in the axial plane. Tunnel collision was avoided by aiming the ALL tunnel 40° anteriorly and perpendicular to the anatomical axis of the femur. A more horizontal orientation of the ACL with the AMP technique is a risk factor for tunnel conflicts., Clinical Relevance: ALL tunnel orientation needs to be adjusted to avoid tunnel conflicts in combined ACL-ALL reconstructions., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Background: Total knee arthroplasty (TKA) remains the gold standard for end-stage knee osteoarthritis. The prevalence of stiffness after this procedure described in literature varies from 1.3% to 5.3%. The causes of arthrofibrosis after total knee arthroplasty are multifactorial. Revision TKA is a successful procedure when performed for loosening, instability, mechanical implant failure, or infection. The results of revision TKA for idiopathic arthrofibrosis and stiffening are however less favorable., Purpose: It has been the authors' impression that the poor results in arthrofibrosis could be in part related to the use of traditional PS or CCK-type revision implants. Our hypothesis is that better results can be achieved in case a rotating hinge design (RHK) is used. The reason could be that RHK designs allow for much more aggressive capsuloligament debridement and therefore more adequate fibrosis removal, while securing optimal implant stability, tibiofemoral rotational freedom, and flexion-extension space stability. The purpose of our study was to investigate in our database whether this hypothesis is correct., Methods: Retrospectively, 40 patients with the defined range of knee motion were identified. Patients with underlying mechanical malalignment, component malposition, soft-tissue imbalance or infections were excluded. Twenty-two patients received a hinged-type prosthetic device (18 Zimmer RHK, four Stryker RHK) and 18 patients received a less constrained condylar type prosthetic device (17 Legion CCK, one Vanguard CCK)., Results: Preoperative data were similar for RHK as CCK-type implants except for knee pain score, which was significantly worse for the RHK group (36 vs 44, p = 0.049). At two years of follow-up, compared to CCK, the RHK group demonstrated significantly better postoperative results for knee function scores (68.9 vs 54.2, p = 0.0015), knee function improvement (22.8 vs 4.8, p = 0.0015), knee pain improvement (26.4 vs 9.4, p = 0.0050), greater maximal flexion (99.9° vs 81.4°, p = 0.0005), better maximal extension (-1.9° vs -6.2°, p = 0.0447), greater flexion gain (35.8° vs 14.2°, p = 0.0002), and greater extension gain (8.6° vs 2.0°, p = 0.0083)., Conclusion: Our data show that revision arthroplasty of the stiff knee using a rotating hinged device can provide excellent results in selected cases. To date, this is the first study to describe the difference in outcome between revision total knee arthroplasty for idiopathic arthrofibrosis using a hinged or a constrained condylar knee device., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Sickle cell disease (SCD) is associated with a high incidence of ischemic stroke. SCD is characterized by hemolytic anemia, resulting in reduced nitric oxide-bioavailability, and by impaired cerebrovascular hemodynamics. Cerebrovascular CO2 responsiveness is nitric oxide dependent and has been related to an increased stroke risk in microvascular diseases. We questioned whether cerebrovascular CO2 responsiveness is impaired in SCD and related to hemolytic anemia. Transcranial Doppler-determined mean cerebral blood flow velocity (V(mean)), near-infrared spectroscopy-determined cerebral oxygenation, and end-tidal CO2 tension were monitored during normocapnia and hypercapnia in 23 patients and 16 control subjects. Cerebrovascular CO2 responsiveness was quantified as Delta% V(mean) and Deltamicromol/L cerebral oxyhemoglobin, deoxyhemoglobin, and total hemoglobin per mm Hg change in end-tidal CO2 tension. Both ways of measurements revealed lower cerebrovascular CO2 responsiveness in SCD patients versus controls (V(mean), 3.7, 3.1-4.7 vs 5.9, 4.6-6.7 Delta% V(mean) per mm Hg, P < .001; oxyhemoglobin, 0.36, 0.14-0.82 vs 0.78, 0.61-1.22 Deltamicromol/L per mm Hg, P = .025; deoxyhemoglobin, 0.35, 0.14-0.67 vs 0.58, 0.41-0.86 Deltamicromol/L per mm Hg, P = .033; total-hemoglobin, 0.13, 0.02-0.18 vs 0.23, 0.13-0.38 Deltamicromol/L per mm Hg, P = .038). Cerebrovascular CO2 responsiveness was not related to markers of hemolytic anemia. In SCD patients, impaired cerebrovascular CO2 responsiveness reflects reduced cerebrovascular reserve capacity, which may play a role in pathophysiology of stroke.