Search

The research was undertaken to design, develop and characterize the smart lipid system of an inadequate bioavailable Atovaquone (ATQ). The poor aqueous solubility and dissolution are the major constrain of inadequate bioavailability. The solubility study reveals that Labrasol-ALF (L-ALF), Tween 80, and Trancutol®P (TP) were screened as oil, surfactant, and co-surfactant, respectively. The pseudo ternary diagram was constructed to locate the appropriate amount of each ingredient, and a 1:3:1 ratio of l-ALF: Tween 80: TP was chosen. The effect of precipitation inhibitor was assessed using the parachute effect. Soluplus® (SP) was chosen as a precipitation inhibitor at 5%. Ishikawa diagram and qualitative risk assessment were performed to screen the critical material attributes (CMAs) and critical process parameters (CPPs). d-optimal mixture design was explored for the optimization of the formulation. The amount of oil, surfactant, and co-surfactant was screened as independent variables, whereas globule size, poly-dispersibility index (PDI), and solubility were designated dependent variables. The design batches were evaluated for the in-vitro dissolution rate, PDI, zeta potential, globule size, etc. The optimal region was located using an overlay plot. The optimized formulation has shown a 97.91% drug release within 1 h. The value of zeta potential (-27.43 mV) and PDI (0.468) indicates the stability of the formulation. The parachute effect had explored for the selection of precipitation inhibitors. SP was able to increase the solubility of ATQ and reduce the precipitation of the drug. The amount of l-ALF, Tween, 80and TP was significant for the formulation of SNEDDS. The formulation was novel, effective, patient-friendly, and industry oriented.

BCS class II drugs exhibit low aqueous solubility and high permeability. Such drugs often have an incomplete or erratic absorption profile. This study aimed to predict the effects of β-cyclodextrin (βCD) and different hydrophilic polymers (poloxamer 188 (PXM-188), polyvinyl pyrrolidone (PVP) and soluplus (SOLO)) on the saturated solubility and dissolution profile of hydrophobic model drug rivaroxaban (RIV). Binary inclusion complex with βCD were prepared by kneading and solvent evaporation method, at drug to cyclodextrin weight molar ratios of 1:1, 1:2, and 1:4. Saturated solubility of the hydrophobic model moiety was evaluated with βCD to explore the increment in saturated solubility. Dissolution test was carried out to assess the drug release from the produced binary inclusion complex in the aqueous medium. Solid state analysis was performed using Fourier transform infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and Scanning electron microscopy (SEM) techniques. When compared to pure drug, the binary complex (Drug: βCD at molar ratio of 1:2 w/w) demonstrated the best performance in terms of enhanced solubility and drug release. Furthermore, ternary inclusion complex was prepared with hydrophilic polymers SOLO, PVP K-30 and PXM-188 at 0.5%,1%,2.5%,5% and 10% w/w to optimized binary formulation RIV:βCD (1:2) prepared by kneading (KN) and solvent evaporation (S.E) method. The findings demonstrated that among ternary formulations (1:2 Drug: βCD: SOLO 10% S.E) manifested greatest improvement in saturated solubility and dissolution rate. Results of solubility enhancement and improvement in dissolution profile of model drug by ternary inclusion complexation were also supported by FTIR, DSC, XRD, and SEM analysis. So, it can be concluded that the ternary inclusion systems were more effective compared to the binary combinations in improving solubility as well as dissolution of hydrophobic model drug rivaroxaban.

The quantification of both polymer and drug during the dissolution of an amorphous solid dispersion (ASD) in aqueous media arouses great interest and may aid in the formulation. However, the available quantification methods for polymer excipients are limited, expensive, and challenging compared to drugs. In this work, a size exclusion chromatography method (HPLC-SEC) was developed and validated to determine the concentration of a frequently used polymer excipient, Soluplus® (Sol). In order to develop a method for the quantification of dissolved Soluplus®, two methods (SEC-UV and SEC-RID) with two injection volumes were tested with standard solutions of three different batches of Soluplus. The developed HPLC-SEC-UV method showed acceptable linearity (R 2 > 0.9990) for all batches of Soluplus, good accuracies above a concentration of 0.1 mg/mL (coefficient of variation < 2 %), relatively good precision at a concentration of 0.1 mg/mL (coefficient of variation < 2.5 %), and high recoveries at a concentration of 0.75 mg/mL (coefficient of variation < 0.5 %). The presence of Felodipine (Fel) and Lumefantrine (Lum) in the liquid media did not interfere with Soluplus quantification. The use of various surfactants, such as Tween® 80, Tween® 20, Span® 80, Span® 20, Kolliphor® TPGS, and sodium lauryl sulphate at a low concentration (0.005 mg/mL) did not show any effect on Soluplus® and did not interfere with Soluplus® quantification with any of the Soluplus batches. The addition of lithium bromide (LiBr) to the mobile phase within a concentration range of 0.05-1.0 M did not improve Soluplus® quantification., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

Soluplus® nanomicelles have been widely reported in biomedical field for their excellent drug loading capacity and solubility enhancement ability. However, when administrated in vivo, the protein corona will be formed on Soluplus® nanomicelles, significantly affecting their drug delivery performance. Up to now, few studies examined the protein corona formation process and its impact factors of Soluplus® nanomicelles. The multiple proteins in biofluids may form protein corona in different modes due to their diversified properties. In this study, Bovine serum albumin (BSA), Lysozyme (Lyso) and Bovine hemoglobin (BHb) were chosen as model proteins to investigate the protein corona formation process of Soluplus® nanomicelles. By analyzing the polarity of the protein amino acid residues distributing microenvironments, the results showed that there were two different protein corona formation modes, i.e., surface adsorption and insertion, which were determined by the hydrophilicity of proteins. The hydrophobic BHb followed the insertion mode while hydrophilic BSA and Lyso followed the surface adsorption mode. Ultimately, upon protein corona formation, the size and surface chemistry of nanomicelles was significantly affected. We believe this study will provide a new research paradigm to the design and application of Soluplus® nanomicelles., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Proanthocyanidins (PCs), a component of grape seed extract (GSE), have recently being used for the treatment of wounds. However, poor absorption, poor stability and rapid elimination from the systemic circulation limit its acceptance. In addressing these problems, we herein report the development of PCs based nanoformulations (PCs/SOLU) for the first time based on 1% GSE and assessed its wound healing potential in-vivo on the wistar rats. GSE and PCs/SOLU nanodispersions 1% were prepared by incorporating them into the ointment base via uniform mixing to form ointment which could be easily applied topically to wounds. The antibacterial activity of PCs/SOLU against gram positive and gram-negative bacteria strains proved that the cell membranes became more permeable with disrupted cell structure. While carrageenan and histamine induced rat paw edema analyses show there was no inflammatory signs in animals treated with 1 wt% of PCs/SOLU nanodispersion. Excision wound measuring about 3 cm in depth was created on the wistar rats. The ointment was applied topically on the wounded site and the wound contraction was measured daily. Grape seed extract (GSE) ointment, ointment base and povidone‑iodine (Povi-Iod) ointment of about 1% was used as the control, positive and negative standards. PCs/SOLU nanodispersion heals the wound by mobilising the fibroblasts in the wound site and inhibits the inflammatory response through decreased expression of monocyte. The macroscopical, immunological and histopathological assessments revealed that PCs/SOLU nanodispersion ointment usage improves the cell adhesion and proliferation., (Copyright © 2019. Published by Elsevier B.V.)

Increasing the degree of supersaturation of drugs and maintaining their proper stability are very important in improving the oral bioavailability of poorly soluble drugs by a supersaturated drug delivery system (SDDS). In this study, we reported a complex system of Soluplus-Copovidone (Soluplus-PVPVA) loaded with the model drug silybin (SLB) that could not only maintain the stability of a supersaturated solution but also effectively promote oral absorption. The antiprecipitation effect of the polymers on SLB was observed using the solvent-shift method. In addition, the effects of the polymers on absorption were detected by cellular uptake and transport experiments. The mechanisms by which the Soluplus-PVPVA complex promotes oral absorption were explored by dynamic light scattering, transmission electron microscopy, fluorescence spectra and isothermal titration calorimetry analyses. Furthermore, a pharmacokinetic study in rats was used to demonstrate the advantages of the Soluplus-PVPVA complex. The results showed that Soluplus and PVPVA spontaneously formed complexes in aqueous solution via the adsorption of PVPVA on the hydrophilic-hydrophobic interface of the Soluplus micelle, and the Soluplus-PVPVA complex significantly increased the absorption of SLB. In conclusion, the Soluplus-PVPVA complex is a potential SDDS for improving the bioavailability of hydrophobic drugs.

The objectives of this study were to explore sodium dodecyl sulfate (SDS) and Soluplus on the crystallization inhibition and dissolution of felodipine (FLDP) extrudates by bottom-up and top-down approaches. FLDP extrudates with Soluplus and SDS were prepared by hot melt extrusion, and characterized by polarized light microscopy, differential scanning calorimetry, and fourier transform infrared spectroscopy. Results indicated that Soluplus inhibited FLDP crystallization, and the whole amorphous solid dispersions (ASDs) were binary FLDP-Soluplus (1:3) and ternary FLDP-Soluplus-SDS (1:2:0.15∼0.3 and 1:3:0.2∼0.4) extrudates. Internal SDS (5%-10%) decreased glass transition temperatures of FLDP-Soluplus-SDS ternary ASDs without presenting molecular interactions with FLDP or Soluplus. The enhanced dissolution rate of binary or ternary Soluplus-rich ASDs in the nonsink condition of 0.05% SDS was achieved. Bottom-up approach indicated that Soluplus was a much stronger crystal inhibitor to the supersaturated FLDP in solutions than SDS. Top-down approach demonstrated that SDS enhanced the dissolution of Soluplus-rich ASDs via wettability and complexation with Soluplus to accelerate the medium uptake and erosion kinetics of extrudates, but induced FLDP recrystallization and resulted in incomplete dissolution of FLDP-rich extrudates. In conclusion, top-down approach is a promising strategy to explore the mechanisms of ASDs' dissolution, and small amount of SDS enhances the dissolution rate of polymer-rich ASDs in the nonsink condition., (Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

The aim was to explore the potential application of novel self-assembled nanoparticles cross-linking thermosensitive hydrogels composed of polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol (Soluplus) and tacrolimus (FK-506) for local therapy of rheumatoid arthritis (RA). The sol-gel transition temperature (T sol-gel ), gelation time, rheological behaviors, in vitro release, in vivo gelation and retention, and therapeutic efficacy against adjuvant-induced arthritis (AIA) rats were compared between the Soluplus hydrogels and widely studied poloxamer 407 (P407) delivery systems. In sol, the spherical and uniform FK506 loaded Soluplus nanoparticles (Soluplus-SNPs) were self-assembled with encapsulation efficiency of 99.5±1.5% and particle size of 73.9±2.9nm. The decreased T sol-gel of Soluplus-SNPs hydrogels was associated with the addition of salts, elevation of pH and ionic strength. The optimal T sol-gel of Soluplus-SNPs with concentrations of 10%-30% in phosphate buffer (50mM, pH 7.4) was from 37.4±0.1°C to 32.8±0.3°C and the gelation time was not greater than 2min. Soluplus-SNPs gelling systems showed lower viscosity and wider range concentrations in sol state at 25°C and stronger gel strength at 37°C than P407, which resulting in longer sustained release of FK506 but without burst-release in vitro, and longer retention time in the local injection site in vivo. The therapeutic efficacy to treat AIA rats was significantly enhanced from d10 to d17 after a single dose of FK506 loaded in 10% and 20% Soluplus-SNPs hydrogels. In conclusion, Soluplus-SNPs hydrogel is a potential sustainable delivery system for FK506 to treat RA locally., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Our previous study demonstrated that the retention of drug in the hydrophobic core of Soluplus micelle greatly impeded drug absorption from gastrointestinal tract. Using supersaturated polymeric micelles can improve drug release, however, insufficient maintaining of supersaturation of drug is still unfavorable for drug absorption. Here, we report adding small amount of small molecule, sodium dodecyl sulfate (SDS), to Soluplus solution can form a Soluplus-SDS complex. This complex not only showed a higher solubilization capability for the model drug cyclosporine A (CsA), but also maintained a longer period of and higher supersaturation than was achieved with Soluplus alone. The Soluplus-SDS interactions were characterized by analyzing surface tension, small-angle X-ray scattering (SAXS), fluorescence spectra, and nuclear magnetic resonance spectroscopy. The results demonstrated that the formation of Soluplus-SDS complex via SDS adsorption on hydrophobic segments of Soluplus, which have more hydrophobic domain than that of Soluplus micelle, contributed significantly to the solubilization and stabilization of supersaturated CsA. Using this amphiphilic copolymer-small molecule surfactant system, the cellular uptake and rat in vivo absorption of CsA were more effectively achieved than pure Soluplus. The area under the plasma concentration-time curve (AUC) and the maximal plasma concentration (Cmax) achieved by CsA-loaded Soluplus-SDS complex were 1.58- and 1.8-times higher than the corresponding values for CsA-loaded pure Soluplus, respectively. This study highlighted the benefits of Soluplus-SDS complex for optimizing the solubilization and oral absorption of a drug with low aqueous solubility., (Copyright © 2016 Elsevier B.V. All rights reserved.)