Search

In order to improve the mechanical properties and corrosion resistance of 2A97 aluminum-lithium alloy, this research develops a novel strain heat-treatment technology. Surprisingly, 2A97 alloy treated by 4% pre-strain and 48 h deep cryogenic aging exhibits excellent mechanical properties, whose yield strength, tensile strength, and elongation are 573.7 MPa, 593.6 MPa, and 14.25%, respectively. Furthermore, the corrosion resistance of samples treated by the above pre-strain deep cryogenic aging process is two times as much as traditional T6 aged. This study deeply investigates the influence of various precipitates in 2A97 alloy on its performance through microstructure analysis. The results show that the introduction of pre-strain inhibits the precipitates of the T1 and δ′ phases at the grain boundaries, and prevents the formation and widening of precipitate-free zones. At the same time, it reduces the potential difference between grain boundaries and matrix, and enhances the corrosion resistance of 2A97 alloy. Deep cryogenic can inhibit recovery and maintain deformation dislocation, so that a large number of defects produced by pre-strain promote the nucleation and diffusion of precipitates in the matrix, resulting in tiny and uniformly distributed precipitates. Therefore, the novel pre-strain deep cryogenic aging not only endues 2A97 alloy excellent performance, but also offers a new strategy for controlling precipitation.

We developed a simple method of in-situ synthesize carbon nanotubes (CNTs) on Ti–6Al–4V (TC4) alloy powder to fabricate CNTs/TC4 compound powders through plasma-enhanced chemical vapor deposition (PECVD). By this approach, CNTs on TC4 alloy powder exhibit better uniform dispersion and morphology compared with the traditional CVD methods. In order to reveal the growth behavior of CNTs during the PECVD process, XRD, SEM, TEM, and Raman spectroscopy were used to analyze the morphology and graphitization of CNTs at different synthesis conditions. The plasma is benefit to the pyrolysis of CH4, but overmuch plasma bombardment also reduces the yield and quality of CNTs. The number of CNTs can be significantly improved with appropriately increasing the temperature and time, but excessive temperature, time and carbon concentration can increase the number of impurities such as amorphous carbon. Significantly, the growth mechanism of CNTs synthesized in TC4 powders is following tip-growth mode in PECVD process. Additionally, the quantity and quality were satisfactory at 600 °C for 30 min with 50 W plasma power. This study about PECVD process lays a foundation for improving the comprehensive properties of CNTs/TC4 composites in the future.