Search

Objective: The objective of this study was to determine if phosphor plates used in predoctoral clinics are microbiologically contaminated and to identify the source of contamination., Study Design: Forty-five of 300 phosphor plates (15%) were randomly selected for examination. The plates were pressed into individual blood agar plates, were incubated using standard techniques at 37 degrees C, and were monitored for 72 hours. The number, size, distribution, and variety of resulting colonies were noted. A representative of each type of colony was selected to be Gram stained using the standard technique., Results: Of the plates, 42.2% were uncontaminated, 57.8% yielded bacterial colonies, and 15.6% of those colonies demonstrated hemolytic growth. The hemolytic growth included combined alpha and beta hemolysis and beta only hemolysis. Six colonies were gram-positive rods and 7 were gram-positive cocci., Conclusion: Meticulous infection-control techniques are inevitable and continuous reinforcement and training for staff and students are mandatory. Periodic gas sterilization of phosphor plates may be necessary.

Objective: The purpose of this research project was to investigate the origin of the anatomical structures interpreted as trabecula bone on dental radiographic images., Study Design: Mandible sections were cut sagitally into halves. Trabecular bone was removed from each section in 4 stages. Following each stage, standardized radiographs were made, using CDR direct digital equipment. Trabecular bone in the resulting digital images was measured with 4 methods: (1) mean gray level; (2) the fractal dimension of the basic images; and, following morphological image processing, (3) counting the number of trabecular ends, intercepts, and segments (EIS) and (4) performing fractal analyses of the skeletonized images. Additionally, human visual interpretation of the collected images was conducted through a written examination. Repeated measures analysis of variance (ANOVA) was used to test for changes in measurements attributable to bone removal., Results: Repeated measures ANOVA indicated that the use of gray levels, fractal dimension, and morphologic operations quantifying using EIS or fractal analysis had similar performance and resulted in significant changes in measurements following bone removal ( P < .05). Visual differences were not always apparent between each stage of bone reduction. Radiometric and morphologic analysis showed measurable differences between stages., Conclusions: These results imply that the inner trabecula, the junctional trabecula, and the actual cortical housing all contribute to some extent to the radiograph, although changes in the radiographic architecture are not always clinically detectible.

The American Academy of Oral and Maxillofacial Radiology developed these Parameters of Care to provide national guidelines for the use of radiographs prescribed for the diagnosis of disease, treatment planning, and follow-up care of patients with abnormalities of the oral and maxillofacial region. The Parameters cover radiographic techniques, imaging of the temporomandibular joint, imaging of diseases of the jaws, and imaging of dental implant sites.

Ideal orthodontic treatment should achieve long-term stability of the occlusion. The mandibular incisor segment has been described as the segment that is most likely to exhibit relapse after treatment and retention. Therefore, relapse of this is a challenge that clinicians need to address. The purpose of this study is to evaluate the amount of relapse that may occur in Angle Class II Division 1 patients, treated orthodontically with tandem mechanics. All cases in this study were treated without extraction of permanent teeth, and the patients were followed for at least 2 years after the end of the retention phase of treatment. Six predictors were investigated at pretreatment, posttreatment, and postretention periods. A synopsis of this study shows the correction of lower incisor crowding as measured by the irregularity index was stable over 5.2 years of postretention follow-up; but longer follow-up time revealed increased relapse of incisor irregularity. Intermolar width increased during treatment and remained stable in the follow-up period. Overjet and overbite corrections and changes in the lower incisor to mandibular plane angle were also stable in the follow-up period. In addition, the amounts of overjet correction and loss of expansion of intercanine distance after treatment were associated with increased irregularity index in the follow-up period. It appears the discrepancies between this and previously published works are sufficiently dramatic that the whole question of treatment philosophy and long-term stability may need to be reevaluated.

Objective: To determine the correlations among morphologic operations (MO) values and the correlations among gray-level values for regions of interest (ROIs) placed at various locations on digital images of alveolar bone for 45 patients., Study Design: As part of a larger study, up to 7 vertical bite-wing radiographs were taken and digitized for each of 45 patients. Sets of 2 rectangular ROIs were placed on the digitized images of interdental alveolar bone at 4 locations for each patient. The ROIs (1 crestal and 1 apical) were placed between second premolars and first molars in all 4 dental quadrants. Gray-level values were measured, and MO analysis was performed on each ROI. Descriptive statistics were calculated and correlations determined., Results: Paired correlations (such as apical vs crestal, left vs right, maxillary apical vs mandibular apical) of MO values were weak (r = 0.01-0.21), but corresponding correlations for gray-level values were relatively strong (r = 0. 60-0.92)., Conclusion: MO values varied with ROI location considerably more than did gray-level values. Additionally, ROI size and shape apparently affected MO data. Accurate placement and documentation of ROIs appear to be critical considerations in analyses that use MOs.

The correction and relapse of mandibular anterior crowding was evaluated in a population of 58 patients with Angle Class I malocclusion who were treated orthodontically without extraction of permanent teeth. The subjects were retrospectively evaluated from records taken before treatment, posttreatment, and postretention. The postretention period averaged 8 years (minimum of 4 and maximum of 20 years). All cases in Groups A and B were given orthopedic treatment to develop the maxillary apical base in the transverse and anteroposterior planes. Group A was treated with expansion of the inner bow of the face bow appliance (Kloehn), and Group B was treated with the Haas palatal expansion appliance. Both groups were then treated orthodontically with tandem mechanics. The response variables measured were: overbite, overjet, intercanine distance, intermolar distance, and irregularity index. Study groups A and B were not significantly different for subject age, retention, or postretention time. Moreover, the groups did not show significant difference for any of the response variables before treatment. However, there was a statistically significant difference in the treatment times (P =.0133). A statistically significant treatment effect was observed for most response variables in the groups. Overbite, overjet, and irregularity index were significantly reduced, intermolar distance was significantly increased, and intercanine distance showed no significant change in Groups A and B. In the postretention period, there was a tendency for variables to change slightly toward their before treatment values but no compromise of orthodontic correction was noted. The irregularity index in Group A was corrected from 4.8 to 1.1 mm and remained at 1.1 mm in the postretention period. The irregularity index in Group B was corrected from 5.1 to 1.2 mm (P =.0001) and changed slightly from 1. 2 to 1.7 mm (P =.0540) in the postretention period. We concluded that mandibular incisors tended to become more crowded postretention. However, in contrast to previous reports, we calculate this relapse to be small. Neither before treatment nor posttreatment variables were predictive of relapse.

Objectives: This study was conducted to determine whether morphologic operation procedures applied to digitized, non-standardized, clinical radiographs of mandibular alveolar bone could be used to distinguish between a population of patients diagnosed with periodontitis and a population of patients either diagnosed with gingivitis or having healthy gingivae., Study Design: Two groups, one consisting of 29 patients who either had healthy gingivae or had been diagnosed with gingivitis and the other consisting of 32 patients who had been diagnosed with periodontitis, were compared. Pre-existing clinical radiographs were digitized, and for each patient three to six regions of interest were placed on an image of the mandibular posterior region of the interdental bone. The regions of interest were processed under two morphologic-operations protocols, and a mean density (referred to as an MO number) was calculated for each patient. With paired t-tests, the resulting MO numbers for the two groups were compared., Results: The two populations were statistically different (p < 0.05)., Conclusion: The results of this study indicate that morphologic operations have the potential to differentiate between patient groups differing in periodontal health.

Objectives: The purpose of this study was to evaluate the ability of two different panoramic imaging systems to produce cross-sectional images with accurate vertical dimensions of the posterior mandible., Study Design: Three partially edentulous human cadaver mandibles were used for this study. On each mandible, three potential implant sites were arbitrarily identified in an area between the mental foramen and the ascending ramus. Each site was imaged using two different panoramic machines. Using each image, the mandible's outline, cortical thickness, and position of the mandibular canal were traced on clear acetate film. The mandibles were then sectioned at each site to serve as a gold standard. The cadaver sections and tracings (corrected for magnification) were measured, recording the overall mandibular height, distance from the crest of the ridge to the superior aspect of the mandibular canal, and the thickness of the cortical bone at the most inferior aspect of the mandible., Results: There were no significant differences between either of the system's image measures and the gold standard when considering the distance between the crest and the mandibular canal. Differences were noted between the systems measures and the gold standard in the assessment of the cortical bone thickness and the overall mandibular height., Conclusions: Both imaging systems can be useful for vertical measurements of a potential implant site in the posterior mandible.

Objectives: We used digitized dental radiographs of alveolar bone to test the hypothesis that the fractal dimension, as calculated with the program "ImageFractal" was independent of variations in X-ray exposure, beam alignment, and region of interest placement., Study Design: The radiographic data set consisted of 72 radiographs digitized with 200 microns pixels. Radiographs were obtained with the use of three time settings and two alignments. Rectangular regions of interest were placed on each digital image over the interdental bone between the mandibular first and second molars on six hemimandibles. Each of six hemimandibles had identical copies of a unique region of interest placed on every image in its series. New regions were made 3 months later. A fractal dimension was computed from each region of interest with the caliper method included in ImageFractal, a public domain program available through National Institutes of Health. The resulting fractal dimensions were evaluated with two repeated measures analysis of variance., Results: No significant differences were found between the fractal dimensions calculated for baseline images and those from overexposed and underexposed images, from images with 4 to 6 degrees of alignment variations, or from repeat regions of interest., Conclusion: The results support the hypothesis that fractal dimensions derived from digitized dental radiographs are not affected by variations in exposure or small variations in alignment and imply an absolute region of interest placement may not be necessary. However, caution should be used with the use of the fractal dimension to discriminate among alveolar bone variations until further research is performed.

Unlike traditional radiographs, digital images are electronically alterable and offer the potential for enhancing diagnostic information. The authors conducted a small-scale study to examine differences in clinicians' diagnoses of caries using traditional radiographs and digitized images vs. microscopic diagnosis. Two general dentists and one oral-maxillofacial radiologist scored the images for caries. This study suggests that digital enhancements may aid some clinicians in caries diagnosis.

This pilot study was undertaken to determine whether spatial resolution affects radiometric analyses aimed at detecting progressive enamel loss. Four teeth were weighed, attached to a positioning device, and evaluated with radiography. A 1 mm strip of enamel was removed from each tooth, and the teeth were weighted again and reexamined by radiography. This process was repeated five times until 1/2 mm of dentin was removed. The radiographs were digitized twice with 59 and 200 microns pixels at 8 bits, providing two series of images with the optical densities converted into 256 gray levels. Each series of images was adjusted for contrast variation. Regions of interest were drawn on the crowns, and cumulative percent histograms (CPHs) were calculated. Within a series of CPHs enamel reduction resulted in shifts in the CPHs that were directly proportional to the amount of enamel removed. CPH shifts associated with the smaller 59 microns pixels accounted for 68% of the variation in weights caused by enamel reduction, whereas the shifts associated with the larger 200 microns pixels accounted for 50%. The results indicate that pixel size does affect radiometric determinations of enamel reduction.

Longitudinal radiographic assessment of crestal alveolar bone plays an important role in the diagnosis and long-term evaluation of periodontal disease in patients. Because practitioners use several radiographic techniques to obtain bite-wing radiographs, horizontal and vertical alignment errors could adversely affect the diagnostic impression gained from this type of radiographic examination. The objective of this study was to determine the alignment reproducibility of three different clinical techniques used to acquire bite-wing radiographs. Patients who require bite-wing radiographs as part of a dental school screening process were radiographed with modified standard bite-wing tabs and two different intraoral positioning devices. Horizontal and vertical angular deviations were measured and alignment errors were calculated for each radiograph. The mean total angular alignment error for the standard bite-wing tab technique was 6.2 degrees, whereas the mean alignment error for both positioning devices was less than 1.8 degrees. The results of this study suggest that an intraoral positioning device for acquiring bite-wing radiographs should be used.

Orthopedic surgery and general dentistry residency program directors were surveyed about treatment considerations for dental patients with prosthetic joints. The majority believed dental diseases can affect joint prostheses and thought orthopedic surgeons should be consulted before dental treatment. Both groups recommended antibiotic prophylaxis for these patients.

A survey was conducted to determine the familiarity with base metal dentinal radiopacity. The results show that although 91% of the respondents had observed this phenomenon, only 6% could correctly identify its cause. Despite the general misunderstanding concerning its cause, 48% of the respondents considered this radiopacity when making a diagnosis and providing treatment. To limit confusion, a standard term is suggested so this feature can be more consistently identified and properly considered in making diagnoses and in formulating treatment plans.