Search

The Remote Experimentation Centre (REC) in Japan has been preparing to replicate the full dataset of ITER over 10 000 km distance. In such a multi-site data repository environment, the data location informing service will be essential to find and retrieve the data efficiently. Considering the long latency time and the self sustainability of remote sites, the data location database should be running at each repository site. Multi-master asynchronous replication between cooperating databases will be essential to realize the remote experimental collaborations in fusion research. This study has investigated the functional differences of some relational databases and found that Postgres BDR has the expected database replication capabilities. Bi-directional replication (BDR) tests by using the LHD database and SNET revealed that the throughputs are sufficient for remote collaborations in fusion experiments.

The blanket modules in DEMO are made of reduced-activation ferritic martensitic (RAFM) steel F82H. This material is ferromagnetic and it drags the magnetic field lines into the first wall (FW). Because of this, the heat load by the plasma heat flux, which goes along the magnetic field line will become higher. In this research, the first analysis of such effect has been done. The extra magnetic field Bm made by RAFM wall becomes higher at inner midplane, and the heat load at the module front surface becomes 1.3 MW/m2 to 5 MW/m2. Additionally, near the toroidal gaps, BM becomes high. Thus, at the top of the FW, magnetic field lines are dragged into the toroidal gaps directly because, the magnetic flux surface is not closed. This makes high (about 10MW/m2) heat load concentration at the moduel edge. The effect of the NBI port is also analyzed. Also near the port, Bm becomes high and the orbit of the magnetic field lines are changed. The effect of this doesn't occur near the port, but far region such as inner midplane or top of the FW. The heat load becomes 6 MW/m2 at inner midplane. These results indicate that the effect of RAFM steel on the FW heat load is not negligible, and more detailed analysis is necessary.

Plasma heat flux in the peripheral plasma reaches the first wall (FW) along a magnetic field line, and it sometimes causes several MW/m2 orders of magnitude high heat flux concentration at narrow region, such as the edge of the blanket module. Thus, to assess and to reduce the heat load is key issue in the DEMO design activity. In this research, a new heat load analysis code is introduced based on the e-folding model. In this code, the decay length λ is changed depending on wall connection length of magnetic field line (defined as the length of magnetic field line from the wall to the wall), and parallel heat flux q// is calculated in each flux tube. This code can calculate the FW heat load simulating actual blanket module shapes. The 0.23 MW/m2 peak heat load at inner midplane in the case of the ideal FW (without gaps between blanket modules) is increased to 22 MW/m2 at toroidal module edge in the case of box shaped module. To shadow the edge and reduce such peak heat load, toroidal, and poloidal roof shaping is applied. Required roof height is analyzed from this code calculation. After shaping, peak heat load is reduced to 1.2 MW/m2. This value is under the allowable value 1.5 MW/m2, and in this case, surface temperature is also less than allowable temperature.

Remote experiment with WEST tokamak in CEA Cadarache from ITER Remote Experimentation Centre (REC) inRokkasho had been successfully carried out under the agreement between the Government of Japan and theEuropean Atomic Energy Community for the joint implementation of the Broader Approach (BA) activities in thefield of fusion energy research. The WEST and the REC sites were connected with the international broadbandnetwork for science and education of SINET, GÉANT and RENATER. Due to a long distance over 10,000 km oftwo sites, the latency was about 200 ms (round trip time) in total via the direct line between EU and Japan ofSINET5. Based on the communication between local and remote participants, plasma discharges were success-fully executed repeatedly according to the pulse schedule produced by remote Session Leader after the approvalby Engineer in Charge on WEST site. Intershot analyses were successfully executed during the pulse interval onan analysis server prepared in Partners network in the WEST for external collaborator. Full function required forthe remote experiments were successfully demonstrated in the large size tokamak facility, WEST. For remoteparticipation of ITER, however, it is expected that the amount of experimental data and the number of remoteparticipations will become very large. Distributed database system based on data replication using high-speeddata transferring method and distributed computing resources in local and remote sites are proposed as apossible solution in ITER.