Search

Background: Variations in cage design, material, and graft shape can affect osteointegration and adjacent segment range of motion (ROM) and stress after anterior cervical discectomy and fusion (ACDF) surgery. This study aimed to evaluate the biomechanical properties of a novel dynamic cervical cage design in both titanium (Ti) and polyether ether ketone (PEEK) with variations in bone graft shape using a single level ACDF (FE) model., Methods: A 3-dimensional C3-C6 FE model was developed using computed tomography scan data from a healthy male subject. The novel S-shaped dynamic interbody fusion cage with a zero-profile fixation was inserted at the C4-C5 level with 4 different bone graft shapes (square, circular, rectangular, and elliptical). Changes in segmental ROM and maximum von Mises stresses at the fusion and adjacent segments were analyzed., Results: Both Ti and PEEK cages showed decreased ROM at the fusion and adjacent levels for all shapes of bone graft when compared with the intact spine model. The elliptical graft, for both Ti and PEEK cages, showed a lower percentage of reduction in segmental ROM at the fusion and adjacent levels (0%-5.6%) when compared with other graft shapes (0%-12%). Maximum stresses at the fusion level were lowest in Ti cage with elliptical graft (229.8-347.6 MPa) when compared with other shapes (241.2-476.2 MPa) in flexion, extension, and lateral bending. For the bone graft, maximum stresses were highest on the elliptical-shaped bone graft in flexion and extension in the Ti cage, and in flexion and lateral bending in the PEEK cage., Conclusions: Both Ti and PEEK cages showed decreased ROM at the fusion and adjacent levels for all shapes of bone graft when compared with the intact spine model. In the Ti and PEEK dynamic cages, the elliptical shape bone graft showed decreased stress on the cage and increased stress on the bone graft. Further experimental and clinical studies are needed to confirm these encouraging biomechanical results of this novel dynamic, zero-profile fusion device with elliptical bone graft in ACDF surgery., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Objectives: The aim of this retrospective study was (1) to evaluate the radiographic features to differentiate arthroscopically confirmed complete and incomplete discoid lateral meniscus (DLM) (2) to determine the cutoff values for any parameter that was found to differentiate complete from incomplete DLM., Materials and Methods: We retrospectively analyzed plain knee radiographs of 130 arthroscopically proven DLM. Seventy-nine patients had complete DLM and 51 patients incomplete DLM. Knee radiographs from 52 patients with arthroscopically proven normal lateral meniscus acted as control group. Radiographic parameters measured included fibular height, lateral joint space, condylar cutoff sign, height of lateral tibial spine, obliquity of lateral tibial spine, squaring of the lateral femoral condyle, and cupping of the lateral tibial plateau., Results: Among radiographic parameters, high fibular head, widening of the lateral joint space and femoral condylar cutoff sign showed statistically significant (p<0.0001) differences between complete and incomplete DLM. At specific threshold points of fibular height<11 mm, lateral joint space>6 mm and condylar cutoff sign<0.80, the diagnosis of complete DLM revealed 87.3% sensitivity, 81.6% specificity and 78.4% positive predictive value (PPV) for the fibular height, 81.0% sensitivity, 86.6% specificity and 83.1% PPV for the lateral joint space, and 86.1% sensitivity, 83.5% specificity and 80% PPV for the condylar cutoff sign., Conclusions: Radiographic features of fibular height, lateral joint space and condylar cut off sign can be used for screening of a complete type of DLM. However, radiographs are not a reliable screening tool for an incomplete DLM., Level of Evidence: IV, Case Series., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Purpose: This retrospective study aimed to determine if computer navigation provides consistent accuracy for limb and component alignment during TKA irrespective of body mass index (BMI) by comparing limb and component alignment and the outlier rates in obese versus non-obese individuals undergoing computer-assisted TKA., Methods: Six hundred and thirty-five computer assisted total knee arthroplasties (TKAs) performed in non-obese individuals (BMI<30 kg/m(2)) were compared with 520 computer-assisted TKAs in obese individuals (BMI ≥ 30 kg/m(2)) for postoperative limb and component alignment using full length standing hip-to-ankle radiographs., Results: No significant difference in postoperative limb alignment (179.7° ± 1.7° vs 179.6° ± 1.8°), coronal femoral (90.2° ± 1.6° vs 89.8° ± 1.9°) and tibial component (90.2° ± 1.6° vs 90.3° ± 1.7°) alignment and outlier rates (6.2% vs 7.5%) was found between non-obese and obese individuals. Similarly, alignment and the outlier rates were similar when non-obese individuals and a subgroup of morbidly obese individuals (BMI >40 kg/m(2)) were compared., Conclusions: Computer navigation can achieve excellent limb and component alignment irrespective of a patient's BMI. Although obesity may not be an indication per se for using computer navigation during TKA, it will help achieve consistently accurate limb and component alignment in obese patients., Level of Evidence: Level II., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Background: Successful outcomes following high tibial osteotomy (HTO) require precise realignment of the mechanical axis of the lower extremity. The present study investigated whether the weight-bearing limb scanogram (WBS) technique provided a more accurate mechanical axis realignment than the navigation technique in open high tibial osteotomy (OHTO)., Methods: This prospective study involved 80 knees (78 patients) undergoing OHTO. The WBS technique was used in 40 knees and the navigation technique in 40 knees. Each technique was performed by a different surgeon in a different hospital. Postoperative coronal limb alignment was assessed using the weight-bearing line (WBL) ratio on full-length standing hip-to-ankle radiographs., Results: We found that the mean postoperative WBL ratio was greater in the WBS compared to the navigation group (p=0.001), and hence the ratio for the WBS group was closer to the ratio target of 62%. There was a greater proportion of WBL ratio outliers in the navigation group than the WBS group (25% vs. 10%, p=0.034)., Conclusion: We conclude that the WBS technique was more accurate than the navigation technique for restoration of coronal leg alignment in OHTO., Level of Evidence: Level II., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Purpose: This prospective study aimed to evaluate radiographically, mechanical or hip-knee-ankle (HKA) axis in healthy, asymptomatic, Asian (Indian and Korean) adults between 20 and 40 years of age to determine the incidence of inherent varus (mechanical limb alignment of >3° varus) and the factors influencing it., Methods: Three hundred and eighty-eight lower limbs were evaluated using full length, standing hip-to-ankle radiographs in 198 healthy, asymptomatic, Asian (Indian and Korean) adults between 20 and 40 years of age to assess the hip-knee-ankle (HKA) angle, medial proximal tibial angle (MPTA), femoral bowing and femoral neck-shaft angle to determine the incidence of inherent varus (mechanical limb alignment of >3° varus) and the factors influencing it., Results: Overall, the mean HKA angle was 177.6°±2.6° with 34.5% of limbs in inherent varus (mean HKA angle 174.9°±1.8°). The incidence of inherent varus was significantly higher (p=0.01) in males (40%) compared to females (28%) but similar among Indian (34%) and Korean subjects (35%). The hip-knee-ankle (HKA) angle showed significant positive correlation (r=0.82, p<0.001) with only the medial proximal tibial angle (MPTA)., Conclusions: Inherent varus alignment of the lower limb is fairly common among asymptomatic, Asian adults. These results raise several pertinent questions regarding the role of inherent varus in the aetiopathogenesis of knee osteoarthritis and in lower limb realignment procedures., (© 2013 Elsevier B.V. All rights reserved.)

Purpose: This prospective study aimed to evaluate radiographically, change in joint line and femoral condylar offset with the optimized gap balancing technique in computer-assisted, primary, cruciate-substituting total knee arthroplasties (TKAs)., Methods: One hundred and twenty-nine consecutive computer-assisted TKAs were evaluated radiographically using pre- and postoperative full-length standing hip-to-ankle, antero-posterior and lateral radiographs to assess change in knee deformity, joint line height and posterior condylar offset., Results: In 49% of knees, there was a net decrease (mean 2.2mm, range 0.2-8.4mm) in joint line height postoperatively whereas 46.5% of knees had a net increase in joint line height (mean 2.5mm, range 0.2-11.2mm). In 93% of the knees, joint line was restored to within ± 5 mm of preoperative values. In 53% of knees, there was a net increase (mean 2.9 mm, range 0.2-12 mm) in posterior offset postoperatively whereas 40% of knees had a net decrease in posterior offset (mean 4.2mm, range 0.6-20mm). In 82% of knees, the posterior offset was restored within ± 5 mm of preoperative values., Conclusions: Based on radiographic evaluation in extension and at 30° flexion, the current study clearly demonstrates that joint line and posterior femoral condylar offset can be restored in the majority of computer-assisted, cruciate-substituting TKAs to within 5mm of their preoperative value. The optimized gap balancing feature of the computer software allows the surgeon to simulate the effect of simultaneously adjusting femoral component size, position and distal femoral resection level on joint line and posterior femoral offset., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Despite several advantages of medial opening wedge high tibial osteotomy, this procedure has been noted to have a high rate of complications especially with the use of a spacer plate for fixation. We retrospectively evaluated the early complications of 138 medial opening wedge high tibial osteotomies done using autologous tricortical iliac bone graft and T-plate fixation(AO locking compression T-plate, Ti/3H 4.5-5.0 mm, Synthes, Switzerland, Model No. 440.131 in 30 and low-profile locking T-plate and low-profile locking T-plate in 128 patients. At a mean follow-up of 36.8 months (13 to 78), 26 knees (18.8%) developed complications. Complications varied from osteotomy site infection, loss of correction, broken screws and lateral tibial plateau fracture to joint fluid leakage, pseudoaneurysm and iliac bone fractures. Using the "safe zone" technique and penetrating the lateral cortex with Steinmann pins may help to avoid complications such as loss of correction and lateral tibial plateau fractures. The results of this study indicate that medial opening wedge high tibial osteotomy using autologous tricortical iliac bone graft and T-plate fixation may be a technically demanding procedure associated with a moderate rate of complications. However, these complications could be minimized with proper planning, adequate intra-operative precautions and few modifications to avoid technical error., (Crown Copyright © 2010. Published by Elsevier B.V. All rights reserved.)

Whether simultaneous bilateral TKAs (SBTKAs) are more painful and the postoperative functional recovery slower compared to staged bilateral TKAs or unilateral TKAs are issues that frequently concerns patients. The purpose of the current study was to compare the early postoperative pain, function and recovery in simultaneous bilateral versus unilateral computer-assisted TKA. In this prospective study, 50 consecutive patients undergoing unilateral computer-assisted total knee arthroplasties (TKAs) were compared with 50 consecutive patients undergoing SBTKAs in terms of pain, length of hospital stay and rehabilitative milestones during the immediate postoperative period. The mean visual analogue pain scores, mean knee range of motion, straight leg raising and extensor lag were equal in both the groups at the time of discharge. Patients in the SBTKA group lagged behind the unilateral group in stick walking by approximately 24 h. The results of this study demonstrate excellent pain relief and functional recovery with simultaneous bilateral computer-assisted TKAs comparable to unilateral TKAs. Patients eligible for bilateral TKAs can undergo them simultaneously without excessive pain or slower functional outcome.

Ganglion cysts of the posterior cruciate ligament (PCL) are uncommon lesions found incidentally on MRI and arthroscopy. Twenty patients (11 males and nine females) with the mean age of 35 years presenting with a variety of knee signs and symptoms were found to have PCL cysts on MRI. Out of these, thirteen patients (65%) had isolated symptomatic PCL cysts and seven patients had associated chondral and meniscal lesions. Eight out of the 20 patients (40%) gave a history of antecedent trauma. On arthroscopy, the majority of the cysts were situated at the midsubstance of the ligament with inter-cruciate distension and no involvement of the substance of the ligament. The content of the cysts varied with the majority having yellowish viscous fluid and three containing serous and bloody fluid. All cysts were successfully treated arthroscopically through standard anterior, posteromedial and posterolateral portals with no signs of recurrence on MRI at a mean followup of 24 months. PCL cysts may clinically mimic meniscal or chondral lesions and preoperatively, MRI is essential for the diagnosis of ganglion cysts arising from the PCL. Ganglion cysts of the PCL can be successfully treated arthroscopically using standard portals.

Our aim was to evaluate the alteration in angle of posterior slope of the tibia and the degree of patellar height following medial opening wedge high tibia osteotomy(HTO) using autologous tricortical iliac bone graft in 32 consecutive patients. Twenty three females and nine males underwent medial opening wedge high tibia osteotomy (HTO) using autologous tricortical iliac bone graft in 34 knees (33 primary medial compartment osteoarthritis and 1 idiopathic osteonecrosis of medial tibial condyle). The posterior slope of tibia was determined by the proximal tibial anatomical axis. Patellar height was measured by the Insall-Salvati and the Blackburne-Peel ratios. Preoperative and postoperative (last follow up) values of these three parameters were compared. The intra- and interobserver variability of these methods was determined before and after operation. At the end of mean follow up of 3 years this procedure produced no significant change in posterior slope. Pre and postoperative posterior slope were 8.7 degrees+/-3.6 degrees and 8.2 degrees+/-2.8 degrees respectively (P=0.412). Pre and postoperative Insall-Salvati ratios were 0.93+/-0.10 and 1.05+/-0.11 respectively (P<0.001). The Insall-Salvati ratio increased in 94% of patients and patellar ligament length was significantly increased. The distance between the patellar and tibiofemoral joint line decreased in 82% of patients. The mean Blackburne-Peel ratio declined from 0.71+/-0.12 to 0.61+/-0.13 (P<0.001). Twenty six percent of postoperative Blackburne-Peel values satisfied the radiographic criterion for patellar infera (Blackburne-Peel ratio<0.54). There was no difference in the intra-and interobserver variability of measurements either before or after HTO. Opening wedge HTO using autologous tricortical iliac bone graft with internal fixation and early mobilisation prevented change in posterior slope of tibia, lengthened the patellar ligament and elevated the tibiofemoral joint line when the mean ratio of anterior and posterior gap at the osteotomy site was around two-thirds.

We assessed the effect of foot deformity on the loading axis of lower limbs in 33 patients with genu varum (25 bilateral and eigth unilateral) caused by varying etiologies including achondroplasia, cerebral palsy, prior trauma, rickets, metaphyseal chondrodysplasia and primary osteoarthritis using single leg stance and both leg stance radiographs. Deviation at the knee from the hip ankle line (conventional) and hip foot line (centre of hip to centre of heel) was calculated. A comparison was made between single leg stance and two leg stance for tibiocalcaneal angle, mechanical axis angle, knee and ankle joint line convergence angle, conventional mechanical axis deviation (MADC) and ground mechanical axis deviation (MADG). In addition comparisons were also made among three groups formed depending on the tibiocalcaneal angle and MADC-MADG difference for all the above measurements. Mechanical axis deviation (calculated using the two methods) varied with the talocalcaneal angle and single leg stance. Patients with a fixed subtalar varus and with severe genu varum, where the normal compensatory subtalar eversion could not compensate showed that conventional mechanical axis deviation was significantly higher by 3.4+/-2.4 mm and ground mechanical axis deviation degrees was significantly higher by 3.8+/-3.2 mm in single leg stance when compared to two leg stance (p<.0001). Foot deformity should be included during preoperative evaluation and planning for knee deformity correction.