Search

Bacteria and fungi are ubiquitous throughout built environments and are suspended in the air, potentially affecting human health. However, the impacts of climate zones on the diversity, structure, and stochastic assembly of indoor airborne microbes remain unknown. This study comprehensively analyzed indoor airborne microbes across five climate zones in China during the summer and winter using high-throughput sequencing. The diversity and structure of indoor airborne communities vary across climatic zones. A random forest model was used to identify biomarkers in different climate zones. The results showed no relationship between the biomarkers and their rankings in mean relative abundance. The Sloan neutral model fitting results indicated that the impact of climate zones on the stochastic process in the assembly of indoor airborne microbes was considerably more important than that of seasons. Additionally, the influence of seasons on the diversity, structure, and stochastic assembly process of indoor airborne microbes differed among different climate zones. The diversity, structure, and stochastic assembly processes of bacteria present distinctive outcomes in climate zones and seasons compared with those of fungi. Overall, these findings indicate that customized strategies are necessary to manage indoor airborne microbial communities in each climate zone, season, and for specific microbial species., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Although free hydroxyl radical (·OH) generated on OMS-2-based catalysts during the catalytic ozonation process have been shown as important reactive oxygen species (ROSs) for toluene degradation, improvement of surface ·OH formation ability remains challenging. Here, Na, K, Rb, and Cs-OMS-2-SO 4 2- /ZSM-5 catalysts were prepared, characterized and evaluated for catalytic ozonation of toluene. Both characterizations and DFT calculations showed that the appropriate alkali metal introduction made the catalyst possess with appropriate crystalline, reducibility, and acidity, which was favorable for catalytic ozonation of toluene. Characterizations also showed that alkali metal introduction resulted in water molecule adsorption on Brönsted acid sites of the catalysts, which made water molecule activation by ozone to form ·OH more easily. The introduction of K + content of ∼ 5.9 wt% yielded K-OMS-2-SO 4 2- /ZSM-5 catalyst with the highest Brönsted acid sites and thus formed the most ·OH among the five prepared catalysts. As a result, the catalyst exhibited excellent toluene conversion and CO x selectivity for catalytic ozonation of toluene at room temperature and ambient humidity. Furthermore, the catalytic activity of deactivated K-OMS-2-SO 4 2- /ZSM-5 catalyst was recovered after regeneration by a combination of water washing and heat treatment. Finally, a complete mechanism for toluene catalytic ozonation, catalyst deactivation, and regeneration was proposed., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Adsorptive removal of gas phase low concentration macromolecular organic component, represented by naphthalene, from the enclosed space using ordered mesoporous carbon (OMC) has been studied by molecular simulation and experimental investigation. The simulation results indicated that both adsorption capacity and adsorption stability of the OMCs for naphthalene decreased with the increase of pore sizes from 2 nm to 8 nm. Characterizations showed that the prepared OMCs had the pore structure similar to the simulated OMCs except for the rough surface. In particular, the adsorption performance of the prepared OMCs was significantly lower than that of the simulated OMCs when pore size was 2 nm and 3 nm, which was attributed to the rough inner surface of these adsorbents, blocking the narrow pore channels and significantly reducing the pore volume. OMC with pore size of 4 nm had the highest adsorption amount for naphthalene. The co-adsorption experiments in the presence of both naphthalene and toluene, acetone or water showed the adsorption performance of OMCs for naphthalene were almost unaffected by the presence of low concentration toluene and acetone, as well as high relative humidity., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Characterizing marine biotoxins (MBs) composition in coastal aerosol particles has become essential to tracking sources of atmospheric contaminants and assessing human inhalable exposure risks to air particles. Here, coastal aerosol particles were collected over an almost 3-year period for the analysis of eight representative MBs, including brevetoxin (BTX), okadaic acid (OA), pectenotoxin-2 (PTX-2), domoic acid (DA), tetrodotoxin (TTX), saxitoxin (STX), ciguatoxin (CTX) and ω-Conotoxin. Our data showed that the levels of inhalable airborne marine biotoxins (AMBs) varied greatly among the subcategories and over time. Both in daytime and nighttime, a predominance of coarse-mode AMB particles was found for all the target AMBs. Based on the experimental data, we speculate that an ambient AMB might have multiple sources/production pathways, which include air-sea aerosol production and direct generation and release from toxigenic microalgae/bacteria suspended in surface seawater or air, and different sources may make different contribution. Regardless of the subcategory, the highest deposition efficiency of an individual AMB was found in the head airway region, followed by the alveolar and tracheobronchial regions. This study provides new information about inhalable MBs in the coastal atmosphere. The coexistence of various particle-bound MBs raises concerns about potential health risks from exposure to coastal air particles., (Copyright © 2022 Elsevier B.V. All rights reserved.)

To understand the characteristics and potential impacts of fungal aerosols in waste disposal treatments, we performed observations at a landfill and an incineration plants in Guangzhou, Southern China. Size-segregated airborne fungal concentrations were measured based on culture-dependent method, and fungal compositions in PM 2.5 were obtained using high-throughput sequencing method. Concentrations of airborne fungi varied from 376 to 9318 CFU/m 3 in the landfill plant and from 53 to 8491 CFU/m 3 in the incineration plant, respectively. The temporal and spatial variations of fungal aerosols indicate that waste disposal operation, garbage transport, air mixing, and meteorological factors can significantly influence the variations of airborne fungi in the outdoor environment in both plants. Among the meteorological factors, light/moderate rain could significantly increase the airborne fungal concentrations while heavy rain could decrease the concentrations due to wet scavenge. We observed that culturable fungal aerosols predominantly resided in the size range of 2.1-3.3 μm. Different fungal community structures in PM 2.5 were found between the landfill and the incineration plants, suggesting the influence of different waste sorts and treatment procedures. We further identified the pathogenic/allergenic fungal taxa (e.g., Alternaria, Epicoccum sp. and Stachybotrys sp.) in the two plants, implying the potential human health risks with long-term exposure for on-site workers and surrounding residents. The fungal genera producing microbial volatile organic compounds (MVOCs, e.g., Cladosporium, Fusarium sp., Penicillium sp. and Candida) were found in both plants. These MVOCs generation related fungal genera could contribute to the odor in the plants and, more importantly, affect the downwind area after aerosolization and transportation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Archaea have an important role in the elemental biogeochemical cycle and human health. However, characteristics of airborne archaea affected by anthropogenic and natural processes are unclear. In this study, we investigated the abundance, structures, influencing factors and assembly processes of the archaeal communities in the air samples collected from Beijing in springtime using quantitative polymerase chain reaction (qPCR), high-throughput sequencing technology and statistical analysis. The concentrations of airborne archaea ranged from 10 1 to 10 3  copies m -3 (455 ± 211 copies m -3 ), accounting for 0.67% of the total prokaryote (sum of archaea and bacteria). An increase in airborne archaea was seen when the air quality shifted from clean to slightly polluted conditions. Sandstorm dust imported a large number of archaea to the local atmosphere. Euryarchaeota, Thaumarchaeota and Crenarchaeota were the dominant phyla, revealing the primary role of soil in releasing archaea to the ambient environment. Dispersal-related neutral processes play an important role in shaping the structure of airborne archaeal assembly. Of all phyla, methanogenic Euryarchaeota were most abundant in the air parcels come from the south of Beijing. Air masses from the west of Beijing, which brought sandstorm to Beijing, carried large amounts of ammonia oxidizing archaea Nitrososphaera. The results demonstrate the importance of air mass sources and local weather conditions in shaping the local airborne archaea community., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Interactions of particulate matter (PM) and respiratory tract play a crucial role in PM-related respiratory diseases. The majority of the work focuses on the oxidative stress induced by reactions between PM-borne redox-active components and lung lining fluid (LLF). The effects of PM-borne biological components are largely unknown. Of all PM-borne biologicals, bacteria, as living microorganisms, are closely related with inflammatory immune responses. However, its inhalation risk is usually determined without considering the respiratory physiological conditions. In this study, a surrogate lung fluid (SLF) with four typical antioxidants was applied to characterize the ambient bacteria, including concentrations of total bacteria/viable bacteria/culturable bacteria, metabolic activity, bacteria-derived endotoxin, as well as the community structure. Comparing to those determined by SLF, we find that use of PBS leads to an underestimation of the bacterial culturability and metabolic activity. No effect was seen regarding the number of total bacteria and viable bacteria (with intact membrane). Population structure change was seen for bacteria cultured from SLF-collected samples, when compared to that from PBS. Spore-forming bacteria, e.g., genus Bacillus, were found to be easily recovered with SLF. This implies that use of PBS could underestimate the bacteria inhalation risk, especially those bacterial endospores. Our work highlights the necessity to consider the respiratory airway environment when evaluating microbial inhalation risk., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The chemical characteristics of airborne particulate matter (PM) have been extensively studied; however, little information exists for its biological components (bioaerosol) especially during a haze event in mega cities. Herein, we studied the bioaerosol (fluorescent particle) dynamics on both haze and sunny days in Beijing from Dec. 2013 to March 2014 by employing a widely used real-time bioaerosol sensor-ultraviolet aerodynamic particle spectrometer (UV-APS). Firstly, we studied the fluorescent particle (BioPM) concentration and size distributions during three independent haze and three independent sunny days. Secondly, we investigated BioPM dynamics over a two-week long monitoring period which included consecutive haze days and alternated sunny days. In addition, we analyzed bacterial community structures and endotoxin levels in the air samples using pyrosequencing and Limulus amebocyte lysate (LAL) method, respectively. More than 6-fold higher fluorescent particle concentrations up to 5×10(5)/m(3) with peaks at night or early dawn were detected at the time of haze occurrences than those observed on sunny days. When the haze episode progressed for 3-5days, the BioPM concentrations were observed to decrease to the levels that were typically observed on sunny days. In general, ozone levels were found to be elevated at noon, while BioPM, NOx and relative humidity were reduced. Gene sequence analysis revealed no significant difference in abundances and community structures for top 13 bacterial genera between haze and sunny days, yet about twice higher endotoxin levels (12.4EU/m(3)) were detected on haze days than on sunny days. The results here facilitate a better understanding of atmospheric fluorescent particle dynamics including those under haze events., (Copyright © 2016 Elsevier B.V. All rights reserved.)