Search

Incorporation of nanofibers of chitin (NC), lignocellulose (NLC) and bacterial cellulose (BNC) in pectin was studied to improve prebiotic activity and gastrointestinal resistance of the pectin-nanofibers biocomposites for protection of probiotics under simulated gastrointestinal conditions. The biocomposites were prepared using various compositions of pectin and nanofibers, which were designed using D-optimal mixture method. The incorporation of the nanofibers in pectin led to a slow degradation of the pectin-nanofibers biocomposites in contrast to their rapid swelling. AFM analysis indicated the homogenous distribution of interconnected nanofibers network structure in the pectin-nanofibers biocomposite. FTIR spectra demonstrated fabrication of the biocomposites based on the inter- and intra-molecular hydrogen bonding and ionic interaction of pectin-Ca 2+ . XRD patterns revealed the amorphous structures of the biocomposites as compared to the crystalline structures of the nanofibers. Among the compositions, the optimal compositions were as follows: 60% pectin+40% NC, 50% pectin+50% NLC and 60% pectin+40% BNC, where the prebiotic score, probiotic survival under simulated gastric and intestinal conditions were optimum. The optimal biocomposite pectin-NC exhibited the highest survival of the entrapped probiotic bacteria under simulated gastric (97.7%) and intestinal (95.8%) conditions when compared with the corresponding to free cells (76.2 and 73.4%)., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The present investigation deals with the changing network morphology of agarose and high methoxy pectin when mixed with polydextrose as co-solute at concentrations varying up to high level of solids. Thermomechanical analysis and micro-imaging were performed using small deformation dynamic oscillation in shear, modulated differential scanning calorimetry and environment scanning electron microscopy. Fourier transform infrared spectroscopy and wide angle X-ray diffraction were practised to examine the nature of interactions between polymer and co-solute, and the extent of amorphicity of preparations. We observed a decline in the mechanical strength of aqueous agarose preparations upon addition of high levels of polydextrose, which should be attributed to reduced enthalpic content of the coil-to-helix transition of the polysaccharide network. Glass transition phenomena were observed at subzero temperatures in condensed preparations, hence further arguing for the formation of a lightly cross-linked agarose network with changing solvent quality. High levels of co-solute induce formation of weak pectin gels at elevated temperatures (even at 95°C), which with lowering temperature exhibit increasing strength. This results in the formation of rubbery pectin gels at ambient temperature, which upon controlled cooling to subzero temperatures convert to a clear glass earlier than the agarose counterparts., (Copyright © 2012. Published by Elsevier B.V.)

Individual pectin polymers and complexes, isolated from the pericarp of unripe tomato (Lycopersicon esculentum var. Rutgers), were subjected to a mild acid hydrolysis and visualised and characterised by atomic force microscopy (AFM). The AFM images confirm earlier studies showing that individual pectic polysaccharides often possess long branches. The AFM data have been used to construct size and molecular weight distributions for the single molecules and complexes, from which the calculated number-average and weight-average molecular weights can then be compared directly with the published literature data on the rheology of bulk samples. Loss of the neutral sugars arabinose, galactose and rhamnose from the pectin samples does not significantly alter either the size or the branching density of the individual polymers, but is reflected in a breakdown of the complexes. Significant loss of galacturonic acid at long hydrolysis times was found to be accompanied by changes in the size and branching of the single polymers and further breakdown of the complexes. The results suggest that rhamnose, arabinose and galactose are not the major components of the individual polymers but are, instead, confined to the complexes. The polysaccharides represent a previously unrecognised branched homogalacturonan with a minimum mean size some three times larger than that previously reported. The complexes consist of homogalacturonans (HGs) held together by rhamnogalacturonan I (RG-I) regions. Comparison of the rate of depolymerisation of the homogalacturonans and complexes with the published data on changes in the intrinsic viscosity of bulk pectin samples, subjected to similar acid hydrolysis, suggests that the different rates of depolymerisation of RG-I and HG contribute separately to the observed changes in intrinsic viscosity during acid hydrolysis. Thus data obtained using a single molecule microscopy technique provides new insights into the behaviour in the bulk.

Images of native high-methoxyl sugar acid gels (HMSAGs) were obtained by atomic force microscopy (AFM) in the Tapping Mode. Electronic thinning of the pectin strands to one-pixel wide allowed the pectin network to be viewed in the absence of variable strand widths related to preferentially solvated sugar. Thinned images revealed that HMSAGs of pectin comprise a partially cross-linked network, in that many of the cross-linking moieties are attached at only one end. Based on their structural similarities, aggregated pectin in water appears to be a fluid precursor of a HMSAG of pectin. Furthermore, examination of AFM images revealed that gels with 'uniform' distribution of strands and pores between strands had higher gel strengths than gels in which strands were non-uniformly distributed and were separated by large and small spaces.

Many of the functional attributes of pectin, whether in the plant cell wall or in engineered food materials, are linked to its gelling properties and in particular to its ability to assemble in the presence of calcium. Pectin's fine structure and local concentration relative to that of its cross-linking ion play a major role in determining resultant gel micro-structures, and consequently the mechanical and transport properties of pectin matrices. Recent studies have sought to probe the basic properties of such calcium-induced matrices, using a light scattering technique called diffusing wave spectroscopy (DWS). In addition to the low frequency mechanical behaviour, which provides information about the nature and density of cross-links, microrheological measurements carried out with DWS are able to determine the high frequency behaviour, which is closely linked to the response of the basic strands of the network. By using these microrheological measurements, two distinct regimes have been identified into which pectin gels appear to fall: one corresponding to the presence of semi-flexible networks, a generally accepted paradigm in biological gels, and another where flexible networks dominate. In order to explain the origin of these dramatically different networks, distinct assembly pathways have been proposed in which the relative importance of the free energy gained by association and the frictional barrier to polymeric re-arrangement during network formation can differ significantly. By manipulating the local environment in the plant cell wall it is possible that Nature makes full use of both of these network types for fulfilling different tasks; such as providing strain-hardening, maximizing local elastic properties or controlling macromolecular transport.

Pectin are extremely complex biopolymers made up of different structural domains. Enzymatic degradation followed by purification and structural analysis of the degradation products proved to be efficient tools for the understanding of pectin fine structure, including covalent interactions between pectic structural domains or with other cell wall polysaccharides. Due to its high sensitivity, high throughput and capacity to analyze mixtures, mass spectrometry has gained more and more importance as a tool for oligosaccharides structural characterization in the past 10 years. This review will focus on the combined use of mass spectrometry and enzymatic digestion for pectins structural characterization.

Pectins were extracted from roots and petioles of sugar beet, and treated with alpha-arabinosidase, 1,4-beta-galactanase or polygalacturonase. They were then cross-linked using hydrogen peroxide and peroxidase. The effects on pectin molecular size were monitored by size-exclusion chromatography and viscometry. A decrease in apparent molecular size was observed after alpha-arabinosidase and polygalacturonase treatment, and all three enzymes caused a decrease in viscosity. The pectins were then cross-linked using hydrogen peroxide and peroxidase, and the effects on dehydrodiferulate formation were monitored by HPLC. Pretreatment with polygalacturonase caused no significant change in subsequent dehydrodiferulate cross-linking, while pretreatment with alpha-arabinosidase caused a slight change in the ratios of the different dehydrodiferulates formed. Pretreatment with 1,4-beta-d-galactanase caused a more significant change in the ratios of the different dehydrodiferulates formed, and also greatly increased the overall recovery of total ferulates (monomers plus dehydrodiferulates), both in root pectin and petiole pectin. The possible effects of polysaccharide microstructure on the dimerisation and further polymerisation of pectin-linked ferulates are discussed.