Search

Geraniol (Ger) is an essential oil molecule with excellent biological activity. High hydrophobicity and volatility limit its practical application. Cyclodextrins (CDs) are water-soluble cyclic oligosaccharides with hydrophobic cavities. Physical encapsulation of CDs to improve the solubility and stability of essential oil molecules is not satisfactory. Therefore, this study synthesized the γ-CD derivative (γ-CD-Ger) by grafting Ger onto γ-CD using a bromide-mediated method. Compared to the inclusion complexes (γ-CD/Ger) formed by both, the derivatives exhibit better solubility and thermal stability. The derivative has better antibacterial activity when the ratio of γ-CD to Ger was 1:2. In addition, the derivatives did not exhibit cytotoxic and hemolytic properties. These results indicate that this research provides a water-soluble antibacterial agent with a wide range of promising applications and offers new ideas for the application of alcohol hydrophobic molecules in aqueous systems., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Microemulsion is usually a transparent and isotropic liquid mixture composed of oil phase, water phase, surfactant and cosurfactant. The surfactant-framed nanoscale droplets in the microemulsion can penetrate into the skin surface to reduce its barrier function. This makes microemulsion an ideal preparation for the transdermal drug delivery. The permeability of microemulsion may be further enhanced when botanical essential oils that can dissolve the stratum corneum are used as the oil phase. However, the volatility of essential oils is possible to shorten the retention time of the microemulsion on the skin surface. Therefore, analytical methods are required to understand the volatilization process of the microemulsion composed of essential oils to develop the reasonable topical drug carrier system. In this research, Fourier transform infrared (FTIR) spectroscopy with an attenuated total reflection (ATR) accessory cooperated with two-dimensional correlation spectroscopy (2DCOS) to elucidate the volatilization processes of some microemulsions composed of peppermint essential oil. Principal component analysis (PCA) and moving-window two-dimensional correlation spectroscopy (MW2DCOS) revealed the multiple stages of the volatilization processes of the microemulsions. Synchronous 2D correlation infrared spectra indicated the compositional changes during each stage. It was found that the successive volatilizations of ethanol, water and menthone were the major events during the volatilization process of the microemulsion composed of peppermint essential oil. Ethanol can accelerate the volatilization of water, while the composite herbal extract seemed to not influence the volatilization of the other ingredients. After a 20-min-long volatilization process, the remaining microemulsion still contained considerable peppermint essential oil to affect the skin. The above results showed the feasibility of developing the microemulsion composed of peppermint essential oil for the transdermal drug delivery of composite herbal extract. This research also proved that the combination of ATR-FTIR spectroscopy and 2DCOS was valuable to study the volatilization process of the microemulsion., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Due to their excellent emulsification, biocompatibility, and biological activity, proteins are widely used as microcapsule wall materials for encapsulating drugs, natural bioactive substances, essential oils, probiotics, etc. In this review, we summarize the protein-based microcapsules, discussing the types of proteins utilized in microcapsule wall materials, the preparation process, and the main factors that influence their properties. Additionally, we conclude with examples of the vital role of protein-based microcapsules in advancing the food industry from primary processing to deep processing and their potential applications in the biomedical, chemical, and textile industries. However, the low stability and controllability of protein wall materials lead to degraded performance and quality of microcapsules. Protein complexes with polysaccharides or modifications to proteins are often used to improve the thermal instability, pH sensitivity, encapsulation efficiency and antioxidant capacity of microcapsules. In addition, factors such as wall material composition, wall material ratio, the ratio of core to wall material, pH, and preparation method all play critical roles in the preparation and performance of microcapsules. The application area and scope of protein-based microcapsules can be further expanded by optimizing the preparation process and studying the microcapsule release mechanism and control strategy., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Nano-encapsulation of essential oils, a specific area of interest, can help overcome challenges associated with their commercial use. This study aimed to evaluate the effect of different concentrations of chitosan, Ziziphora clinopodioides L. essential oil (ZcEO), and Sodium-Tri Polyphosphate (TPP), both individually and in interaction, on several properties of EO-loaded chitosan nanoparticles. These properties include particle size (PS), zeta potential (ZP), and encapsulation efficiency (EE) using a two-stage emulsion-ionic gelation approach. The optimization of the parameters was done by response surface methodology using Box-Behnken design. The chemical composition of ZcEO was analyzed as well. The primary compounds in ZcEO were found to be pulegone (29.24 %), 1,3-dimethyl-2-(2-methylpropylidene) imidazolidine (9.05 %), piperitenone (6.65 %), thymol (5.38 %), and carvacrol (5.27 %). The PS ranged from 117.33 to 4934.1 nm, the ZP varied from -1.1 to -30.83 mV, and the EE spanned from 31.74 to 87.04 %. The results showed that an increase in the initial EO content led to a decrease in PS and ZP, but an increase in EE. Moreover, increasing the TPP concentration resulted in an enhancement in PS, ZP, and EE, whereas increasing the Chs concentration led to a slight increase in PS, ZP, and EE. Furthermore, the results of this study proved the interaction effect of different parameters on the responses investigated. Under optimized conditions, the optimal concentrations of chitosan, ZcEO and TPP were attained at 6.768, 6.078, and 7.595 mg/mL respectively. This resulted in a PS of 117.331 nm, a ZP of -20.949 mV, and an EE of 75.385 %. In conclusion, the results suggest that adjusting the concentrations of Chs, EO, and TPP is an effective approach to controlling the properties of NPs and optimizing their performance., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

A D-optimal design was employed to optimize the microencapsulation (MEC) of basil essential oil (BEO) within a biopolymer matrix using the complex coacervation technique. BEO microcapsules (BEO-MCs) obtained under the optimal conditions exhibited high yield and efficiency with 80.45 ± 0.01 % and 93.10 ± 0.18 %, respectively. The successful MEC of BEO with an average particle size of 4.81 ± 2.86 μm was confirmed by ATR-FTIR, X-RD, and SEM analyses. Furthermore, the thermal stability of BEO-MCs was assessed using TGA-DSC analysis, which provided valuable insights into the MC's thermal stability. Furthermore, the proposed model, with a high R 2 value (0.99) and low RMSE (1.56 %), was the most suitable one among the tested models for the controlled release kinetics of the optimal BEO-MCs under simulated gastrointestinal conditions. The successful optimization of BEO MEC using biopolymers through the D-optimal design could be a promising avenue for food and pharmaceutical industries, providing new strategies for the development of effective products., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Wormwood leaf is a traditional Chinese herbal medicine with a high medicinal value and long application history and its essential oil is a high-purity plant oil extracted from Wormwood leaf. Pharmacological research reveals that Wormwood leaf and Wormwood essential oil are a broad-spectrum antibacterial and antiviral drug, which can inhibit and kill many bacteria and viruses. We loaded wormwood extract on porous calcium carbonate (Porous-CaCO 3 ) and introduced it and Wormwood essential oil into Natural rubber latex (NRL), thus synthesizing NRL composites with excellent vitro and in vivo antibacterial effect, cell compatibility and mechanical properties. This NRL material can delay the light aging and thermal oxidation of some mechanical properties, which provides a broader avenue for its commercialization., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The incorporation of ginger oil (GO) influenced the physical, optical, and structural properties of the chitosan (CH) film including the decreases of moisture content (60.15 %), water solubility (35.37 %) and water vapor permeability (WVP) (32.79 %) and the increases of tensile strength (TS) (125 %), elongation at break (EAB) (2.74 %) and opacity (131.08 %). Antifungal capacity of the CH film was enhanced when GO was added to the film. The CH + GO film showed a less homogeneous surface that the presence of the oil droplets on the film surface. Moreover, the CH and CH + GO coatings reduced weight loss of persimmon by 14.87 %, and 21.13 %, respectively, compared to the control. Moisture content loss of the coated CH- and the coated CH + GO- persimmons was decreased by 1.94 % and 4.92 %, respectively, compared to that of the control persimmon. Furthermore, the CH and CH + GO coatings decreased in color changes, respiration rate, ethylene production, changes in pH and TSS, and remained firmness of persimmon during storage at 25 °C. In addition, X-ray CT images can be used to monitor internal changes and observe the tissue breakdown during storage period. The ΔGS value can be used as a predictor of persimmon internal qualities. Thus, the CH film containing GO can be applied as an active packaging material., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This work aimed to compare the performance of two relatively underexplored methods for the swollen micelles (SMs) production as nanocarriers for essential oils (EOs). Origanum vulgare and Thymus vulgaris EOs were examined. The first method (SMs-1), involved a self-assembly process, while the second one (SMs-2), employed titration operation of an emulsion into a surfactant solution for SMs formation. Tween 80 and ethanol were used as surfactant and co-surfactant, respectively. The solubilization kinetics and the saturation concentration of EOs were determined. Particle size (measured by DLS) and encapsulation efficiency (EE) were the control parameters assessed, along with the EOs-loaded SMs' stability during 30 days of storage. Additionally, the EOs-loaded SMs' morphology was analyzed using atomic force microscopy (AFM). Finally, the antioxidant activity through the ABTS + radical scavenging and the reducing power of EOs encapsulated in SMs was determined. The results showed that the solubilization of EOs in SMs was a rapid process with high EE. EOs-loaded SMs-2 systems exhibited greater colloidal stability and higher EE compared to EOs-loaded SMs-1 systems, showing smaller and more homogeneous particle sizes. Moreover, EOs-loaded SMs-2 systems maintained constant EE throughout the storage period. AFM imaging confirmed the rounded and heterogeneous morphology of EOs-loaded SMs-1 and the smaller, more homogeneous, and spherical morphology of EOs-loaded SMs-2. EOs-loaded SMs-2 showed high ABTS + radical scavenging and reducing power when encapsulated in SMs. In conclusion, the SMs-2 method emerged as an effective approach for producing efficient nanocarriers for EOs, signifying a promising path for future developments in antioxidant delivery systems., Competing Interests: Declaration of Competing Interest The authors declare no conflicts of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Essential oils (EOs) are biologically active and volatile substances that have found widespread applications in the food, cosmetics, and pharmaceutical industries. However, there are some challenges to their commercial utilization due to their high volatility, susceptibility to degradation, and hydrophobicity. In their free form, EOs can quickly evaporate, as well as undergo degradation reactions like oxidation, isomerization, dehydrogenation, or polymerization when exposed to light, heat, or air. Encapsulating EOs within mesoporous silica nanoparticles (MSNPs) could overcome these limitations and thereby broaden their usage. MSNPs may endow protection and slow-release properties to EOs, thereby extending their stability, enhancing their efficacy, and improving their dispersion in aqueous environments. This review explores and compares the design and development of different MSNP-based nanoplatforms to encapsulate, protect, and release EOs. Initially, a brief overview of the various types of available MSNPs, their properties, and their synthesis methods is given to better understand their roles as carriers for EOs. Several encapsulation technologies are then examined, including solvent-based and solvent-free methods. The suitability of each technology for EO encapsulation, as well as its impact on their stability and release, is discussed in detail. Opportunities and challenges for using EO-loaded MSNPs as preservatives, flavor enhancers, and antimicrobial agents in the food industry are then highlighted. Overall, this review aims to bridge a knowledge gap by providing a thorough understanding of EO encapsulation within MSNPs, which should facilitate the application of this technology in the food industry., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The present research investigates the effectiveness of nano-emulsified coatings (C-1, C-2, and C-3) in preserving the kiwifruit at a temperature of 10 ± 2 °C with 90-95 % relative humidity (RH) for 30 days. The nano-emulsions were prepared from varied carboxymethyl cellulose (CMC) concentrations with different combinations of essential oils such as thyme, clove, and cardamom. Dynamic light scattering investigation with Zeta Sizer revealed that C-1, C-2, and C-3 nano-emulsions have nano sizes of 81.3 ± 2.3, 115.3 ± 4.2, and 63.2 ± 3.2 nm, respectively. The scanning electron microscopy images showed that the nanoemulsion of C-1 had homogenous spherical globules, C-2 had voids, and C-3 showed a non-porous structure with uniform dispersion. The X-ray diffraction analysis indicated that C-1, C-2, and C-3 nano-emulsion exhibited distinct crystallinity and peaks. The nano-emulsion C-1 had reduced crystallinity, while C-2 had lower intensity peaks, and C-3 had increased crystallinity. The results documented that compared to control kiwifruit samples, the samples coated with C-3 nano-emulsion have decreased weight loss, decay incidence, soluble solids, maturity index activity, ethylene production, total bacterial count, and increased titratable acid, and firmness attributes. The results of current research are promising and would be applicable in utilization in industrial applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, zein-gallic acid covalent complex prepared by alkali treatment was utilized as an emulsifier to stabilize cinnamon essential oil (CEO) Pickering emulsion, and the chitosan-based (CZGE) films loaded with CEO Pickering emulsion were prepared by blending. The influences of different contents of CEO Pickering emulsion on the physical properties and biological activities of CZGE films were investigated. The results showed that Pickering emulsion had good compatibility with chitosan matrix and enhanced the interaction between film-forming matrix polymer. In addition, incorporating with CEO Pickering emulsion (15 %, v/v) significantly improved the mechanical and barrier properties of the films, and also enhanced the light transmittance and thermal stability of the films. Furthermore, the loading of emulsion also improved the antioxidant activities of the films and led to the formation of high antimicrobial property against food pathogens, and the slow-release behavior of CEO could effectively extend the biological activity of the films. These results suggested that Pickering emulsion has potential as a loading system and a plasticizer in active packaging, and the feasibility of CZGE film in food packaging., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Plants are known to be the natural factory for the production of flavor chemicals. Essential oils comprised of aldehyde as a functional group are potent in deciphering flavor effects in beverages and fresh and prepared food products. In the majority, these are manufactured through synthetic routes, resulting in high product carbon footprints or CO 2 equivalents in total greenhouse gas emission. FDA has banned some of the synthetic flavor chemicals due to the health hazards associated with them. However, consumer's preference for natural is at stake due to the absence of quantitative traceability tools. The accelerator mass spectrometer (AMS) analysis revealed a distinction between natural and fossil-derived citral and its blends in Cymbopogon essential oils. The plant-derived citral contained a percent modern carbon (pMC) value in the range of 99-100 %. In contrast, the fossil fuel-derived citral showed zero pMC. Similarly, blends of Cymbopogon oils with 30-50 % (w/w) of fossil origin citral contained pMC equivalent to the proportions of modern carbon. These results showed the usefulness of AMS in quantifying the amount of 14 C associated with flavor ingredients. Besides, acute oral toxicity data revealed Cymbopogon oils as the safe flavoring substance at the highest 2000 mg/kg body weight dose in Swiss albino mice., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Individual nanoparticle application has been documented to promote plant production; however, whether co-application of two nanoparticles (NPs) is more sustainable and significantly promotes plant production is unclear. Herein, foliar co-applications of two NPs or their conventional fertilizer forms on the growth, micronutrient (copper and zinc) enrichment, primary productivity, and essential oil (EO) production in a medicinal annual, dragonhead (Dracocephalum moldavica L.), were investigated. Treatments included 1:1 ratio of zinc oxide nanoparticles (ZnONPs):copper oxide nanoparticles (CuONPs) (40-400 mg/L), and compared with individual NPs, individual zinc suspension (ZnS) and chelated copper (chelated-Cu), and their combination, at equivalent concentrations. Results showed that the highest bioenrichment of Zn and Cu was observed with 80-160 mg/L ZnS+chelated-Cu, 400 mg/L ZnONPs+CuONPs, or ionic combination treatments. A dose-dependent increase in hydrogen peroxide and malondialdehyde was observed with co-treatment of NPs or ions, and oxidative stress responses were higher with NPs or ions co-treatment than individual treatment. With 160 mg/L ZnONPs+CuONPs treatment, total chlorophyll, aboveground biomass, and essential oil production increased significantly compared to control, 160 mg/L CuONPs, and 160 mg/L ZnONPs (227, 157 and 823 %; 58, 79, and 51 %; and 46, 80, and 3 %, respectively). Flavonoid and anthocyanin content also increased significantly (58 and 50 %, respectively) with ZnONPs+CuONPs compared to ZnS+chelated-Cu and were higher than ZnONPs or CuONPs alone by 10 and 25 %, and 37 and 36 %, respectively. More importantly, EO production and quality improved with 160 mg/L ZnONPs+CuONPs treatment compared to control. Taken together, our findings showed that foliar co-treatment of 160 mg/L ZnONPs+CuONPs could significantly improve primary productivity, aboveground biomass, and EO quality and yield in dragonhead grown in semi-arid field conditions; and thus, 160 mg/L ZnONPs+CuONPs is recommended as an optimal foliar co-treatment strategy for promoting sustainable plant production in semi-arid regions where soil nutrients and water are limiting factors inhibiting crop yield., Competing Interests: Declaration of competing interest The authors have no conflicts of interest to declare., (Copyright © 2023. Published by Elsevier B.V.)

In the current study, sodium caseinate and chitosan-based composite edible films were developed with the incorporation of black pepper (Piper nigrum) essential oil (BPO) in various concentrations (0.05, 0.1 and 0.15 %) for potential food packaging applications. The chemical composition of BPO was determined using GCMS and the major compound detected were β-caryophyllene, limonene, β-phellandren, pinene, copaene and α-humulene. The addition of BPO resulted in an increase in the thickness, EAB, WVP, moisture content and swelling index values of the films; however, the TS and water solubility decreased. The inclusion of BPO led to a substantial enhancement in the DPPH and ABTS radical scavenging capabilities of the edible films. SEM micrographs demonstrated intermolecular interaction between BPO, sodium caseinate, and chitosan. FTIR spectra confirmed the interaction of the functional groups of the polymers and BPO. The incorporation of the BPO increased the crystallinity of the films. Moreover, the thermal analysis including TGA, DSC and DTG demonstrated an increase in the thermal stability of the edible films with the addition of the BPO. These findings demonstrated that sodium caseinate and chitosan composite based edible films loaded with BPO can be used as sustainable active food packaging material., Competing Interests: Declaration of competing interest The authors declare no conflicts of interest., (Copyright © 2023 Elsevier B.V. All rights reserved.)

In response to the growing demand for biodegraded film with high mechanical properties for complex preservation application scenarios, we developed a curdlan (CD) blended films with exceptional mechanical strength through an alkali dissolution method. Notably, the alkali-soluble CD film exhibited five-fold increase in tensile strength (TS) when compared to its water-soluble counterpart. Furthermore, the inclusion of 2 % bacterial cellulose (BC) resulted in a significant 41.1 % augmentation of the film's TS. Thermal stability improvements were observed through differential scanning calorimetry (DSC) analysis and thermogravimetric analysis (TGA). X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) results provided insights into alterations in film crystallinity and intermolecular interactions. Specifically, the incorporation of 10 % CEO led to an additional improvement in TS. Our experimental investigations involving the packaging of chilled fresh meat with these blended films unveiled their capacity to effectively inhibit microorganism growth, maintain meat color stability, delay protein decomposition and fat oxidation, and extend the storage time up to 9 days. Our study offers a promising solution for food packaging, emphasizing the development of a high-strength degradable CD/BC/CEO blended film, which holds potential for extending the shelf life of food products., Competing Interests: Declaration of competing interest The authors affirm that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The increase in pectin methylesterase (PME) activity on fresh-cut apple surface can smartly trigger the controlled release of bactericidal agents encapsulated within intelligent responsive Pickering emulsions. In this study, we developed a PME-responsive nanocomplex (W-H-II) to stabilize Pickering emulsion containing thyme essential oil (TEO), preserving fresh-cut apples. W-H-II, formed by heat-induced whey protein isolate (WPI) and high methoxyl pectin (HMP) (pH 4.5, 85 °C, 15 min, WPI:HMP ratio 1:2), exhibited good pH stability due to the stabilizing effects of hydrophobic, hydrogen bonding, and electrostatic interactions. The presence of PME triggered the demethylation of HMP within W-H-II, conferring PME response characteristics. Subsequently, a bacteriostasis experiment with pectinase-producing Bacillus subtilis provided evidence of PME-triggered TEO release from W-H-II-stabilized Pickering emulsion. Furthermore, microscopy techniques were employed to verify the demulsification behavior of the emulsion when PME activity ranged from 0.25 to 2.50 U mL -1 . Finally, the PME-responsive TEO Pickering emulsion effectively preserved fresh-cut apples. Stored for 6 days at 5 °C and 10 °C, as the PME activity on the apple surface increased, the decay rate of the coated group was 0 %, with a total colony count below 3.0 log CFU g -1 . This study introduces a novel intelligent preservation strategy for storing fresh-cut apples., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

In this study, some common proteins including, whey protein isolate (WPI), soy protein isolate (SPI), and gelatin (G) conjugated with maltodextrin (MD) via Maillard reaction and were then used to encapsulate Satureja khuzestanica essential oil (SKEO). The higher glycation degree was obtained at a pH of 9 and 3 h of heating at 60 °C for SPI and WPI, and 90 °C for G. The results of FTIR and intrinsic fluorescence test showed the possibility of covalent binding formation between proteins and maltodextrin. The encapsulation efficiencies were obtained about 83.84 %, 88.95 %, and 89.27 % for MD-SPI, MD-G, and MD-WPI, respectively. Moreover, the Maillard reaction-based microcapsules had higher antioxidant activity than the physical mixture of protein-polysaccharide. The addition of SKEO to microcapsules improved antimicrobial activity. The results of this study demonstrated that MD-WPI and MD-G, as encapsulating materials, can be used to enhance the physiochemical properties of microcapsules loaded with SKEO., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Liquid phase microextraction (LPME) and solid phase microextraction (SPME) are popular extraction techniques for sample preparation due to their green and highly efficient single-step extraction efficiency. With the increasing attention to essential oils, their evaluation and analysis are significant in analytical sciences. In this review, starting from a brief description of the recent advances in the last decade, the attention has been focused on the up-to-date research works and applications based on liquid and solid phase microextraction for essential oil analyses. Particular attention has been given to the approaches using ionic liquids, eutectic solvents, gas flow assisted, and novel composite materials. In the end, the technological convergence of novel microextraction of essential oils in the future has been prospected., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Encapsulation has been widely used as the protection of essential oils, which gives the possibility of their implementation as food preservatives. In this study, Perilla frutescens L. essential oil (PLEO) microcapsule powders were prepared firstly by spray drying method using octenyl succinic anhydride starch (OSAs) as wall material, and then they were further encapsulated by sodium alginate and chitosan via polyelectrolyte complex coacervates method. The best results were obtained by using 4 % of OSAs-PLEO microcapsule powders, 2 % of sodium alginate and 1.5 % of chitosan producing PLEO hydrogel beads with encapsulation efficiency of 61.29 % and loading degree of 41.11 %. Morphology observation showed PLEO hydrogel beads was a millimeter scale spherical particle. FTIR assay confirmed the physical embedding of OSAs on PLEO and the formation of complex coacervates between sodium alginate and chitosan. TG and DSC assay showed the chitosan/alginate/OSAs complex coacervates as wall materials substantially improved the thermal stability of PLEO. Besides, PLEO hydrogel beads had a better stability in aqueous and acidic food formulations, which achieved a complete and prolonged release of PLEO. The Peppas-Sahlin model was the best approach for PLEO release profile, and release phenomenon was mainly governed by Fickian diffusion., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Yana Zhao reports financial support was provided by Technological Innovation Plan in University (No. 20200L0287). Yana Zhao reports financial support was provided by Fundamental Research Program of Shanxi Province (No. 20210302124239). Yana Zhao reports financial support was provided by Key Research and Development Project of Shanxi Province (No. 2022ZDYF123)., (Copyright © 2023. Published by Elsevier B.V.)

The effects of dietary supplementation of essential oil on growth performance, carcass yield, meat quality, serum antioxidant capacity, and intestinal tight junctions of broilers with or without Eimeria challenge were investigated. A total of 576 one-day-old male broilers were randomly separated into 8 treatments (6 replication floor-pens per treatment, 12 broilers per pen) in a 4 × 2 factorial design. The 4 diets consisted of 1) a corn and soybean meal basal diet, 2) an anticoccidial diet (60 g nicarbazin and 60 g narasin per ton of feed), 3) an oregano oil diet (500 ppm oregano oil), and 4) a clove oil diet (500 ppm clove oil). On d 10, half chicks were challenged with 1 × 10 4 sporulated oocysts of E. tenella, E. acervulina, and E. maxima per chick, whereas the others were inoculated with an equal amount of dilution (0.5 mL). The Eimeria challenge induced a higher fecal oocyst output on d 18, a lower duodenum Occludin expression level on d 28, a lower serum catalase level, and a higher cook loss and protein loss in thigh muscle on d 42. The anticoccidial diet lowered fecal Eimeria output and increased d 1 to 42 BW gain as compared to the control diet. The clove oil treatment enhanced duodenum ZO-1 expression level in nonchallenged birds, increased BW gain from d 1 to 14 and breast yield on d 42. The oregano oil treatment enhanced ZO-1 expression of challenged birds, reduced feed intake from 15 to 28 d, and helped broilers gain more tender meat. For those Eimeria-challenged broilers, both clove and oregano oil treatments recovered drip loss in breast muscle. Our results suggested that Eimeria challenge in broiler early age could interrupt later serum antioxidant capacity and damage meat quality. The dietary supplementation of clove or oregano essential oils could improve broiler growth performance and partially relieve the coccidial damage in gut integrity and meat quality., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

Composite films were prepared using a flow casting method, with chitosan and pullulan as film-forming agents and Artemisia annua essential oil as the UV absorber. The utility of the composite films for preserving grape berries was assessed. The effect of the added Artemisia annua essential oil on the physicochemical properties of the composite film was investigated to determine the optimal amount of essential oil that should be added to the composite film. When the Artemisia annua essential oil content was 0.8 %, the elongation at break of the composite film increased to 71.25 ± 2.87 % and the water vapor transmission rate decreased to 0.378 ± 0.007 g‧mm/(m 2 ‧h‧kpa). The transmittance of the composite film was almost 0 % in the UV region (200-280 nm) and <30 % in the visible light region (380-800 nm), reflecting the UV absorption by the composite film. Additionally, the composite film extended the storage time of the grape berries. Therefore, the composite film containing Artemisia annua essential oil may be a promising fruit packaging material., Competing Interests: Declaration of competing interest The authors report no declarations of interest., (Copyright © 2023 Elsevier B.V. All rights reserved.)

As the demand for botanical food additives and eco-friendly food packaging materials grows, the use of essential oils, edible biodegradable films and coatings are becoming more popular in packaging. In this review, we discussed the recent research trends in the use of natural essential oils, as well as polysaccharide-based coatings and films: from the composition of the substrates to preparing formulations for the production of film-forming technologies. Our review emphasized the functional properties of polysaccharide-based edible films that contain plant essential oils. The interactions between essential oils and other ingredients in edible films and coatings including polysaccharides, lipids, and proteins were discussed along with effects on film physical properties, essential oil release, their active role in meat preservation. We presented the opportunities and challenges related to edible films and coatings including essential oils to increase their industrial value and inform the development of edible biodegradable packaging, bio-based functional materials, and innovative food preservation technologies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The present study aims to develop an active and "intelligent" film that uses potato starch as a polymeric matrix, anthocyanins from purple corn cob as a natural dye, and molle essential oil as an antibacterial compound. The color of anthocyanin solutions is pH-dependent, and the developed films show a visual color change from red to brown after immersion in solutions with pH values ranging from 2 to 12. SEM and FTIR analyses suggested that anthocyanins have favorable dispersibility and good compatibility with the starch-glycerol matrix. The study found that both anthocyanins and molle essential oil significantly enhanced the ultraviolet-visible light barrier performance. Tensile strength, elongation at break, and elastic modulus reached values of 3.21 MPa, 62.16 %, and 12.87 MPa, respectively. The biodegradation rate in vegetal compost also accelerated during the three-week period, achieving a weight loss of 95 %. Moreover, the film presented an inhibition halo for Escherichia coli, indicating its antibacterial activity. The results suggest that the developed film has the potential to be used as food-packaging material., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The aim of this study is to prepare new packaging materials with improved physical and antimicrobial properties that prevent the growth of microorganisms. Poly(L-lactic acid) (PLA) based packaging films were prepared by the solvent-casting method using spruce resin (SR), epoxidized soybean oil, an essential oil mixture (calendula and clove oil), and silver nanoparticles (AgNPs). The AgNPs were synthesized by the polyphenol reduction method, using spruce resin dissolved in methylene chloride. The prepared films were tested for antibacterial activity and physical properties, such as tensile strength (TS), elongation at break (EB), elastic modulus (EM), water vapor permeability (WVP), and UV-C blocking effect. The addition of SR decreased the water vapor permeation (WVP) of the films, whereas the addition of essential oils (EOs) increased this property due to their higher polarity. The morphological, thermal, and structural properties were characterized using SEM, UV-Visible spectroscopy, FTIR, and DSC. The agar disc well method showed that SR, AgNPs, and EOs imparted antibacterial activity to the PLA-based films against Staphylococcus aureus and Escherichia coli. Multivariate data analysis tools, such as principal component and hierarchical cluster analysis, were used to discriminate PLA-based films by simultaneously evaluating their physical and antibacterial properties., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The exposure levels of selected terpenes (limonene, α- and β-pinenes, and γ-terpinene) emitted by essential oil diffusers in vehicles and studio apartments were assessed using a passive sampling method. A previously developed passive sampler composed of an expanded polytetrafluoroethylene membrane and adsorbent (ePTFE PS) was enlarged and made wearable. Before field deployment, the sampling performance of the modified ePTFE PS for selected terpenes was compared with that of active sampling in a lab-scale 5 m 3 test chamber under constant exposure conditions, supporting that passive sampling provides reasonable estimates of the time-weighted exposure concentration. Fifty volunteers were recruited and asked to wear the ePTFE PS while using an essential oil diffuser inside their own vehicle while commuting and in their studio apartment while sleeping. Terpene levels without an essential oil diffuser were very low in vehicles and 47, 3.6, 1.6, and 0.62 μg m -3 for average concentrations of limonene, α- and β-pinenes, and γ-terpinene in studio apartments, respectively, close to those reported in previous studies. The indoor concentrations of all selected terpenes in vehicles and studio apartments were elevated by the use of essential oil diffusers, especially in vehicles. The average concentration of limonene in vehicles after the use of essential oil diffusers was 11 μg m -3 , which was greater than that before use by a factor of 30. Therefore, cautious usage of essential oil diffusers indoors where the volume is limited, such as a vehicle, is needed to reduce exposure to terpenes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The search for more sustainable strategies to contrast biodeterioration of stone cultural heritage has been developing in recent years to find alternatives to synthetic biocides, since their toxicity and potential impact on the environment and health. In this study, the application of the oregano and thyme essential oils (EOs) was tested to control microbial growth on the external marble of Florence Cathedral affected by extended darkening. Before in situ application, preliminary tests were carried out to evaluate the interference of the EOs with marble (colorimetric and water absorption assays on marble specimens) and their efficacy in inhibiting marble microbiota (sensitivity test on nutrient media). EOs inhibited the whole cultivable microbiota sampled from the Cathedral marble at a very low concentration, while they did not interfere with colour and water absorption capability of uncolonised marble samples when applied as a 2 % solution. Then the two EOs and the commercial biocide Biotin T were used in in situ trials on marble in two outdoor study sites of Florence Cathedral. The effectiveness of the treatments was assessed through short- and mid-term evaluation by multidisciplinary in situ non-invasive (colorimetric and ATP assays, microscopy) and ex situ (microbial viable titer) tests. Concerning results, we found a good correspondence between parameters for evaluation of viability (bacterial and fungi viable titer) and activity (ATP determination) and some correspondence among these and microscopy and colorimetry. Considering the whole data, treatments with oregano and thyme EOs were effective against microbial community, in more cases comparably to the commercial biocide. Some differences found, particularly by viable titer, in the two study sites or in bacterial and fungal components of the microbiota can be partly attributed to differences in structure and colonization pattern of the microbial community due to the peculiar climatic conditions of the differently exposed study areas., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Contaminations of pathogenic and spoilage microbes on foods are threatening food safety and quality, highlighting the importance of developing antimicrobial agents. According to different working mechanisms, the antimicrobial activities of yeast-based agents were summarized from two aspects: antagonism and encapsulation. Antagonistic yeasts are usually applied as biocontrol agents for the preservation of fruits and vegetables via inactivating spoilage microbes, usually phytopathogens. This review systematically summarized various species of antagonistic yeasts, potential combinations to improve the antimicrobial efficiency, and the antagonistic mechanisms. The wide applications of the antagonistic yeasts are significantly limited by undesirable antimicrobial efficiency, poor environmental resistance, and a narrow antimicrobial spectrum. Another strategy for achieving effective antimicrobial activity is to encapsulate various chemical antimicrobial agents into a yeast-based carrier that has been previously inactivated. This is accomplished by immersing the dead yeast cells with porous structure in an antimicrobial suspension and applying high vacuum pressure to allow the agents to diffuse inside the yeast cells. Typical antimicrobial agents encapsulated in the yeast carriers have been reviewed, including chlorine-based biocides, antimicrobial essential oils, and photosensitizers. Benefiting from the existence of the inactive yeast carrier, the antimicrobial efficiencies and functional durability of the encapsulated antimicrobial agents, such as chlorine-based agents, essential oils, and photosensitizers, are significantly improved compared with the unencapsulated ones., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Gas chromatography-ion mobility spectrometry (GC-IMS) has recently gained increasing attention for the analysis of volatile compounds due to its high sensitivity, selectivity, and robust design. Peak shape distortion, including peak tailing or broadening, are well known challenges in chromatographic analysis that result in peak asymmetry and decreased resolution. However, in IMS analysis peak tailing, which is independent on the column separation technique, have also been observed. As high boiling substances, such as monoterpenes, are mainly affected by enlarged peak tailing in GC-IMS, we propose that condensation or adsorption effects within the "cold" IMS cell, which is commonly operated at 45 °C-90 °C, are the root cause. To avoid condensation and to decrease peak tailing, we used a prototypic high temperature ion mobility spectrometry (HTIMS) in this work, which allows an increase of the IMS drift tube temperature up to 180 °C. This HTIMS was coupled to a GC column separation and used to analyse the peak shape of homologues series of ketones, alcohols, aldehydes, as well as high boiling fragrance compounds, such as monoterpenes and phenylpropanoids. While we were able to show that an increased IMS drift tube temperatures correlates well with improved peak shapes, the GC parameters of the HS-GC-HTIMS method, however, were found to have little effect on the peak shapes in IMS spectra. In particular monoterpenes, which display intense peak tailing at lower IMS drift tube temperatures, show significant improvement of the peak shape at higher IMS drift tube temperatures. This leads to the assumption that high boiling substances indeed undergo condensation effects within the IMS cell at low drift tube temperatures. For many separation tasks, such as the separation of the phenylpropanoids eugenol and isoeugenol, comparably low IMS temperatures of 120 °C are already sufficient to achieve a resolution above 1.5. However, the optimal drift tube temperature is dependent on the substance class. While the aspect ratio increases steadily for most monoterpenes, phenylpropanoids and aldehyde monomer peaks investigated, an optimal aspect ratio was found for ketones between 140 °C and 160 °C and alcohols between 120 °C and 140 °C. Lastly, the change of the reduced mobility K 0 with the increase of drift tube temperature was analysed. Compounds with similar chemical structure, such as the alcoholic monoterpenes citronellol and geraniol or the phenylpropanoids eugenol and isoeugenol show similar shifts of the K 0 value. Substances which differ in their chemical structure, such as the aldehyde monoterpenes citral and cinnamal have substantially different shifts of the K 0 value. With a future large substance database, the temperature dependant slope of the K 0 value of a substance could be used to identify the substance groups of unknown molecules. Furthermore, substances with the same drift time but different chemical composition could be separable through a change in drift tube temperature., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

An important field of research is devoted to the development of innovative, sustainable, and safe methodologies to counteract biodeterioration of stone monuments due to the growth of microbial communities. However, besides the biocide's efficacy, it is crucial to consider the features of substrates on which biocides must be applied, to define the so-called bioreceptivity of the lithic faces. In this research five different lithotypes, namely Lecce stone, Travertine, Peperino, Serena stone, and Granite, have been used as substrates for the growth of cyanobacterial biofilms. Open porosity, hygroscopic properties, and roughness parameters have been investigated for each lithotype and correlated to the photosynthetic yields of the biofilms colonizing the different stones to propose an easy method to estimate stone bioreceptivity. Different levels of coverage of the stone surfaces have been accomplished in relation to the typology of lithotypes. To develop innovative restoration methodologies against biodeterioration of stone monuments, a hydrogel-biocide system has been optimized by using a polysaccharide dispersion as a matrix where to embed T. vulgaris essential oil (at 0.25 % or 0.1 %) or its main component thymol (at 0.18 % or 0.07 %). The efficacy and the effect of the innovative biocide have been evaluated combining microscopy, photosynthetic measurements, and colorimetric analyses and both the biocides (with T. vulgaris EO or thymol) showed to be highly effective against the cyanobacterial biofilms for at least six months from the treatment without inducing any significant alteration to the lithic surfaces. The efficacy of thymol alone allows to treat colonized surfaces with a single active ingredient, or at least a mixture thereof, much cheaper and reproducible. The results obtained in this work pave the way to develop a sustainable cleaning protocol to counteract the biodeterioration of stone monuments or historic buildings induced by the presence of phototrophic biofilms that endangered their conservation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Litsea cubeba, an aromatic species of the Lauraceae family, produces a diverse array of monoterpenes. The biosynthesis of monoterpenes is regulated by transcriptional factors (TFs), such as APETALA2/ethylene response factor (AP2/ERF). However, the regulatory mechanisms that control the AP2/ERF gene responsible for the biosynthesis of monoterpenes in L. cubeba have yet to be elucidated. Here, we identified an AP2/ERF gene, LcERF134, as an activator for the accumulation of citral and other monoterpenes. The expression level of LcERF134 was consistent with terpene synthase LcTPS42 in the pericarp. The transient overexpression of LcERF134 significantly increased monoterpene production in L. cubeba as well as the expression of rate-limiting genes involved in the monoterpene biosynthesis pathway. Furthermore, yeast one-hybrid, dual-luciferase and electrophoretic mobility shift assays demonstrated that LcERF134 activated the monoterpene biosynthesis pathway by directly binding to the GCC-box elements of the LcTPS42 and LcGPPS.SSU1 promoters. However, the overexpression of LcERF134 in tomatoes had no impact on the synthesis of monoterpenes, thus indicating that LcERF134 is a species-specific TF. Our research demonstrated that LcERF134 significantly increased the biosynthesis of monoterpenes by inducing the expression of LcTPS42 and LcGPPS.SSU1, thus offering insight into how to enhance the flavor of L. cubeba essential oil., Competing Interests: Declaration of competing interest All authors declare no competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The reuse of waste water (WW) in agriculture is challenging as a potential strategy for sustainable agriculture development. However, its high content of heavy metals may cause damage to ecosystems. The property of biochar (BC) to minimize heavy metals accumulation into the soil was studied taking as a case study peppermint (Mentha x piperita L., Lamiaceae) irrigated with WW. Application of BC and WW, separately, promoted height, shoot number, crown diameter, internode length, leaf number, leaf length, leaf width, fresh (FW) and dry aerial parts weights (DW), root FW and root DW of peppermint. Also an increment in canopy diameter was observed. BC application considerably increased N, Mg, Mn, Fe and Zn, while WW increased N, P, K and Fe levels. Irrigation of peppermint with WW led to an increase of chlorophyll (Chl) a, Chl b, Chl a+b, carotenoids, anthocyanins, photosynthetic rate, transpiration, stomatal conductance, relative water content (RWC), and crop yield. On the other hand, BC application led to a decrease of Cd and Pb accumulation in plants. BC and WW application, separately, increased the essential oil content, the total phenol content, and the antioxidant capacity. Regardless of BC levels, irrigation of plants with WW decreased the percentage of menthone, menthofuran, isomenthone and pulegone in the essential oil, and increased the percentage of menthol and carvone. Similarly, BC application raised the percentage of menthol, and decreased that of pulegone. Overall, the application of BC in the culture medium is able to decrease the heavy metal concentration and improves the essential oil quality and quantity of peppermint under WW irrigation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The development of active packaging based on biodegradable material and incorporating active compounds, such as essential oil, is a new technique to ensure food safety without harming the environment. In this study, nanofiber mats of poly (lactic acid)/ polyethylene glycol (PLA/PEG) blend incorporated with peppermint essential oil (PO) at different ratios (5-20 % v/w) were produced by solution-blow-spinning (SBS) for potential packaging application. Electron microscopy showed a cylindrical and interlaced morphology for PLA/PEG/PO and a significant increase in the diameter (139-192 nm) of the nanofibers by increasing PO content. All nanofibers showed high thermal stability (278-345 °C) suitable for use in the food industry. Nuclear magnetic resonance ( 13 C NMR) spectrum confirmed PO in the nanofibers after SBS. ATR-FTIR spectral analysis supported the chemical composition of the nanofiber mats. PO addition led to obtaining hydrophobic nanofibers, enhancing the contact angle to 122° and decreasing water vapor permeability (60 % reduction compared to the PLA/PEG (3.0 g.mm.kPa -1 .h -1 .m -2 ). Although the PLA/PEG/20%PO nanofibers did not show halo formation in 24 h, they effectively extended the strawberries' shelf-life at 25 °C, evidencing PO release over time. It also reduced weight loss (2.5 % and 0.3 % weight loss after 5 days for PLA/PEG and PLA/PEG/20%PO, respectively) and increased firmness (8-12 N) for strawberries packed with the nanofiber mats. It is suggested that PLA/PEG films incorporating PO may be used as an active, environmentally friendly packaging material., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2023 Elsevier B.V. All rights reserved.)