Search

Introduction: Vitamin D (VitD) maintains bone health and may influence orthodontic tooth movement (OTM). The objective was to evaluate the VitD effect on bone morphometry and the rate and stability of OTM., Methods: Thirty-two male Sprague Dawley rats were assigned into 2 experimental groups, treated with VitD by gavage (systemic) or injection (local), and 2 respective control groups treated with phosphate-buffered saline for 47 days. OTM was performed for 7 days with a nickel-titanium coil bonded between the maxillary first molar and incisors. Microcomputed tomography scanning was performed at 5 time points: before administration of VitD, the start of OTM, the end of OTM, 7 days post-OTM, and 30 days post-OTM. The rate and stability of OTM were assessed. Bone morphometry was analyzed by bone mineral density, bone volume/total volume, total porosity, trabecular pattern factor, structure model index, and connectivity density., Results: The systemic VitD group showed a lower OTM rate and a lower relapse than the control (P <0.05). It also demonstrated increased bone mineral density, bone volume/total volume, and a decrease in total porosity (P <0.05). The bone structure appeared more fragmented and presented a lower connectivity density than the control (P <0.05). No statistical difference was found between VitD local administration and the other groups for the rate and stability of OTM or bone morphometry., Conclusions: The systemic administration of VitD caused a decrease in the OTM rate by generating more bone resistance but also contributed to a lower relapse with a higher bone mineral density., (Copyright © 2022 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Introduction: Children with attention deficit hyperactivity disorder (ADHD) have more sleep breathing problems and parafunctional oral habits than individuals without ADHD. However, there is scarce information on the correlation between their dental malocclusion and these functional disorders. The objective of this study was to assess the severity of malocclusion in patients with and without ADHD and to evaluate the correlation between their functional disorders and dental malocclusion., Methods: Eighty-eight patients aged 6-17 years were divided into 2 groups: ADHD (n = 44) and control (n = 44). A medical questionnaire to assess functional disorders and an orthodontic examination to evaluate malocclusion were completed for each patient. Distribution of the data was evaluated using Shapiro-Wilk test, whereas the 2 groups were compared with a t test, Mann-Whitney U test, Fisher exact test, and Spearman correlation. The association between parafunctional oral habits, ADHD drug intake, and malocclusion severity were assessed with a t test and Mann-Whitney U test., Results: Patients with ADHD had significantly higher severity of malocclusion (P = 0.042), more dental rotation (P = 0.021) and more parafunctional oral habits (P = 0.001), specifically bruxism (P = 0.005), and a history of pacifier use (P = 0.009), than the control group., Conclusions: It is important to be aware of the increased risk of parafunctional oral habits and dental malocclusion among ADHD patients to develop preventive programs, as well as therapeutic strategies for them., (Copyright © 2020 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Background: Long-term, real-world data, as opposed to academic or research data, on outcomes of smoking cessation clinics are scarce. We assessed patient outcomes over a 10-year period at a smoking cessation clinic in a community teaching hospital in Japan and explored predictors of successful smoking cessation., Methods: We used data from a prospective registry of cigarette smokers who participated in a 3-month smoking cessation program comprising combined pharmacological treatment and cognitive behavioral therapy and explored factors associated with program execution and successful smoking cessation. The primary outcome was smoking cessation, defined by quitting completely between the 8-week and 12-week sessions, with verification according to exhaled carbon monoxide (CO) level of ≤10 ppm., Results: Between August 2007 and December 2017, 813 patients with nicotine dependence participated in the program. The number of participants decreased after Japan׳s 2010 tobacco tax increase. Among participants, 433 (53.3%) completed the program. In multivariate analysis, the number of cigarettes smoked daily (odds ratio [OR] 0.98, 95% confidence interval [CI] 0.96, 0.99), cardiovascular disease (OR 1.75, 95% CI 1.16, 2.68), chronic obstructive pulmonary disease (OR 1.74, 95% CI 1.10, 2.78), and gastric/duodenal ulcer (OR 1.77, 95% CI 1.04, 3.08) were significantly associated with program completion. Among program completers, 288 (66.5%) achieved smoking cessation. Exhaled CO level (OR 0.94, 95% CI 0.93, 0.97) and mental disorders (OR 0.53, 95% CI 0.33, 0.85) were negatively associated with successful smoking cessation., Conclusions: Baseline exhaled CO level and mental disorders were significantly associated with either success or failure of smoking cessation., (Copyright © 2019 The Japanese Respiratory Society. Published by Elsevier B.V. All rights reserved.)

Objectives: The aim of this work was to compare the duration of treatment between orthodontic treatment combined with piezocorticision (OT-PC) and conventional orthodontic treatment (COT), as well as to evaluate the safety, inflammatory process, periodontal health, and soft tissue healing in the OT-PC group., Methods: Twelve patients were included in each group, and their treatment times were compared for preliminary bracket alignment (PBA) and for overall treatment. In the OT-PC group, the inflammatory process was evaluated by quantifying cytokines in the gingival crevicular fluid. A calibrated examiner measured the probing depth (PD), the distance between the gingival margin and the cementoenamel junction (GM-CEJ), and the clinical attachment level (CAL), before and after OT-PC. The presence of gingival scars was evaluated. Bone and root injuries were assessed with the use of cone-beam computed tomography., Results: The treatment time was significantly reduced in the OT-PC group for PBA in both maxilla (45%; P = 0.001) and mandible (31%; P = 0.023), as well as for overall treatment (52%; P < 0.0001). Although not statistically significant, several inflammatory mediators demonstrated peaks at 3-5 and 16 weeks. There were not significant changes in PD and GM-CEJ after OT-PC treatment, unlike CAL (0.09 ± 0.12 mm; P = 0.024); 47.5% of piezocorticisions caused gingival scars. Only one patient showed no scars. Four cortical bones did not heal completely, and 2 roots had piezoelectric injuries., Conclusion: OT-PC was effective at reducing the orthodontic treatment time., (Copyright © 2019 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

We describe the case of a 79-year-old woman with pulmonary infarction due to tumor emboli whose high-resolution CT (HRCT) scan demonstrated the reversed halo sign. The patient had gastric cancer and died because of cancer-related cerebral infarction. On autopsy, the central ground-glass area of the reversed halo sign on HRCT corresponded to pulmonary edema associated with alveolar septal capillary metastasis, whereas the peripheral ring-like consolidation consisted of a hemorrhagic infarct with tumor emboli. The present case is important because a detailed pathologic correlation with this unique HRCT appearance was revealed., (Copyright © 2013 The Japanese Respiratory Society. Published by Elsevier B.V. All rights reserved.)

Introduction: The aim of this study was to evaluate the resistance to deformation or fracture of esthetic brackets produced by archwire torsion., Methods: Six types of maxillary right central incisor brackets were analyzed: traditional ceramic brackets (cer); ceramic brackets reinforced with a stainless steel slot (cer/ss); ceramic brackets reinforced with a gold slot (cer/gold); traditional polycarbonate brackets (poly); polycarbonate brackets reinforced with a stainless steel slot (poly/ss); and polycarbonate brackets reinforced with ceramic fillers and a stainless steel slot (poly/cer/ss). Stainless steel wire segments were used, and the testing instrument (Emic DL 10000, São José do Rio Preto, PR, Brazil) was moved at a rate of 1 inch per minute to generate the wire torsion., Results: The brackets showed deformation or fracture resistance values (gf x mm) in decreasing order as follows: cer/ss (3528.1 +/- 516.6), cer/gold (2858.7 +/- 611.6), cer (2424.0 +/- 352.1), poly/cer/ss (2279.5 +/- 174.5), poly/ss (2142.0 +/- 275.7), and poly (1463.6 +/- 193.3). The cer/ss ceramic brackets showed the greatest statistically significant (P <0.01) values of resistance to fracture, and the poly brackets had the lowest statistically significant (P <0.01) values of resistance to deformation. The cer brackets showed no significant differences (P >0.01) from the cer/gold, the poly/cer/ss, and the poly/ss brackets., Conclusions: This suggested that the stainless steel slot might enhance resistance to deformation or fracture, although gold slots and ceramic fillers are ineffective for reinforcing esthetic brackets.

The aim of this study was to evaluate the frictional force between orthodontic brackets and archwires. The differences in magnitude of the frictional forces generated by ceramic brackets, ceramic brackets with metal reinforced slot, and stainless steel brackets in combination with stainless steel, nickel-titanium, and beta-titanium orthodontic archwires were investigated. Brackets and wire were tested with tip angulations of 0 degrees and 10 degrees. Friction testing was done with the Emic DL 10000 testing machine (São José do Rio Preto, PR, Brazil), and the wires were pulled from the slot brackets with a speed of 0.5 cm/min for 2 minutes. The ligation force between the bracket and the wire was 200 g. According to the data obtained, the brackets had frictional force values that were statistically significant in this progressive order: stainless steel bracket, ceramic bracket with a metal reinforced slot, and traditional ceramic bracket with a ceramic slot. The beta-titanium wire showed the highest statistically significant frictional force value, followed by the nickel-titanium and the stainless steel archwires, in decreasing order. The frictional force values were directly proportional to the angulation increase between the bracket and the wire.

Both nerve growth factor (NGF) and pituitary adenylate cyclase activating polypeptide (PACAP) have neurotrophic effects on basal forebrain cholinergic neurons. They promote differentiation, maturation, and survival of these cholinergic neurons in vivo and in vitro. Here we report on the cooperative effects of NGF and PACAP on postnatal, but not embryonic, cholinergic neurons cultured from rat basal forebrain. Combined treatment with NGF, brain-derived neurotrophic factor (BDNF), neurotrophin-4 (NT-4), and PACAP induced an additive increase in choline acetyltransferase (ChAT) activity. There were no cooperative effects on the number of cholinergic neurons, suggesting that ChAT mRNA expression had been induced in each cholinergic neuron. Further analysis revealed that NGF and PACAP led to complementary induction of different ChAT mRNA species, thus enhancing total ChAT mRNA expression. These results explain the cooperative neurotrophic action of NGF and PACAP on postnatal cholinergic neurons.

We have established a primary neuronal cell culture technique from the postnatal (P11 to P15) rat CNS to study the nerve growth factor (NGF) response to basal forebrain cholinergic neurons. The survival of septal cholinergic neurons in culture was monitored both by the determination of choline acetyltransferase activity and by counting acetylcholinesterase-positive cells. Cells obtained from postnatal septal regions were found to require a plentiful oxygen supply during the dissociation of the cells. NGF-mediated survival of the septal cholinergic neurons was similarly observed in the cultures by using different plating cell densities up to 12.5 X 10(5) cells/cm2. These results suggest that the promotion by NGF of cell survival in culture is independent of plating cell density.

Biogenesis of subtilin, an antimicrobial peptide produced by Bacillus subtilis ATCC 6633, was studied in growing cells. Pulse-chase labeling experiments with [35S]cysteine revealed the presence of precursor proteins of subtilin. The synthesis of both precursor proteins and subtilin was inhibited by inhibitors of protein and RNA synthesis. When the precursor proteins were incubated with crude extracts of the organism in vitro, they were converted to subtilin. Pepstatin and phenylmethylsulfonyl fluoride in combination inhibited this conversion.

A cDNA encoding the carboxyl-terminal fragment of the human myeloperoxidase heavy chain was isolated and characterized. It was then used to determine the locations of the myeloperoxidase light and heavy chains in the polypeptide precursor. A cDNA library from poly(A)+ RNA from human leukemia HL-60 cells was constructed in pBR322 and screened by differential hybridization with enriched and depleted cDNA probes and then by hybridization with an oligonucleotide probe. A cDNA clone containing 1278 bp with an open reading frame of 474 bp and a 3' noncoding region of 804 bp was isolated. The amino acid sequence deduced from the nucleotide sequence consisted of 158 residues including a sequence of 14 amino acids known to be present in the heavy chain of the molecule. The cDNA also included a stop codon of TAG followed by a noncoding sequence that included a potential recognition site for polyadenylylation and a poly(A) tail. RNA transfer blot analysis with the cDNA probe indicated that myeloperoxidase mRNA was approximately 3.3 kb in length. In vitro translation of the mRNA selected by cDNA hybridization revealed preferential synthesis of a 74,000-Da polypeptide precursor that could be precipitated with anti-myeloperoxidase IgG. Antibodies specific for the heavy and light chains of myeloperoxidase were isolated from antiserum by affinity chromatography employing Sepharose columns covalently bound to the heavy or light chains. Antibodies specific for the light chain or the heavy chain readily precipitated the 74,000-Da precursor polypeptide. These results indicated that myeloperoxidase is synthesized as a single chain which undergoes processing into a light and heavy chain. Furthermore, the heavy chain of myeloperoxidase originates from the carboxyl terminus of the precursor polypeptide.