Search

Exhausting carbon-based gases from building construction or comfortable household supplies have caused the main pollution gas species for the indoor air environment. Given the variety of indoor activities, many reports have been challenged to find room-temperature operational and harmless materials. Here, we report that the activating MoO vibration mode in Na,Sb doped-NiMoO4 micro-sized powder reveals the high response of CO and VOC, occupying multiple bonds at room temperature. We performed Na and Sb doping in the α-NiMoO4 crystal structure, such as introducing the Sb in Ni and interstitial doping of Na in around 4 Å of free space in the NiMoO4 crystal structure that manipulates the partial β-NiMoO4 phase. The Na,Sb-codoped NiMoO4 generates the higher MoO vibration mode from FT-IR measurement and enables carbon-based gas detection with 38 responses to CO and nearly 20 responses to VOC under 20 ppm of each analyte gases environment. Furthermore, the n-type gas sensing behavior of Na,Sb doped-NiMoO4 chemiresistor exhibits an immediate sensing response instead of a none-of response than intrinsic or single element doped NiMoO4. These results suggest that Na,Sb codoped-NiMoO4 is the applicable material for emergent warning against carbon-based gas exposure in the indoor environment. In addition, activating the electrochemical reaction site of MoO4–2 in NiMoO4 is tailorable by a simple doping process.

In this study, non-oriented Au-decorated SnO2 nanospheres (NSs) were synthesized using hydrothermal and microwave methods. The SnO2 spheres ranged from hundreds of nanometers to a microscale. The oxygen vacancy on the surface increased after Au adsorption on the surface of the SnO2 NSs, ultimately showing a synergistic effect with the spillover effect of the existing Au catalyst. Specifically, at 100 °C and 200 °C, the response to 10 ppm H2S gas improved to 16.14 and 46.81, respectively. These gas sensing effects were approached individually by being divided into two disadvantages (oxygen adsorption and homojunction) and five advantages (oxygen vacancies, spill-over, surface area, H2S + SnO2 reaction, and H2S + O2 reaction). Based on this reference, we investigated SnO2 NSs of various sizes and functions by adjusting the process variables.

After forming the double layer of SnO2 and Au, the compound of Sn and O with multiple band gaps was formed in a short time period via flame chemical vapor deposition (FCVD). The Sn component of SnO2 has fluidity and is the only one moving to the discrete Au side and leaving O behind. The capillarity of Sn allows it to form a unique structure with Au-Sn-O nanoparticles and amorphous Sn-O nanotubes of multiple compositions in a single process. For verification, the gradual morphological, crystallographic, compositional, and optical changes in the material were sequentially presented as per the degree of FCVD.

This technical note provides some considerations for the metallographic observation of intergranular attack (IGA) in Alloy 600 steam generator tubes. The IGA region was crazed along the grain boundaries through a deformation by an applied stress. The direction and extent of the crazing depended on those of the applied stress. It was found that an IGA defect can be misevaluated as a stress corrosion crack. Therefore, special caution should be taken during the destructive examination of the pulled-out tubes from operating steam generators.

This work presents the influence of noise originating from the tube itself on the detectability and sizing accuracy for laboratory-induced outer diameter axial cracks in nuclear steam generator tubes. The variations of signal amplitude and phase angle of the same cracks were analyzed when increasing the signal-to-noise ratio of the tube itself from 9 to 18. It was experimentally verified that the detectability for small cracks was enhanced by increasing the signal-to-noise ratio. The phase angle also rotated to a value representing the actual position and depth of a crack when increasing the signal-to-noise ratio.