Search

Hemp has been an agricultural commodity for millennia, and it has been undergoing a resurgence in interest and production due to its high content of cannabinoids, protein, fiber and other ingredients. For legal possession and use throughout the USA, hemp and hemp products must have delta-9-tetrahydrocannabinol (THC) concentration < 0.3%. As with most crops, pesticides may be applied when farming hemp, which need to be monitored in food, feed, and medicinal products. The aim of this work was to evaluate and validate the recently developed "quick, easy, cheap, effective, rugged, safe, efficient, and robust" (QuEChERSER) sample preparation mega-method to determine pesticide residues in hemp plants, flowers, powders, oils, and pellets. High-throughput analysis of final extracts for 106 targeted pesticides and metabolites from North American monitoring lists entailed: 1) ultrahigh-performance liquid chromatography - tandem mass spectrometry (UHPLC-MS/MS) with column back-flushing, and 2) instrument-top sample preparation + low-pressure gas chromatography (ITSP+LPGC-MS/MS). In QuEChERSER, 2 g sample is extracted with 10 mL 4/1 (v/v) acetonitrile/water by mechanical shaking for 10 min, followed by 3 min centrifugation. For LC, 0.2 mL of extract is taken and solvent exchanged into initial mobile phase followed by 5 min ultra-centrifugation prior to the 10 min analysis. For GC-amenable pesticides, the remaining initial extract is partitioned with 4/1 (w/w) anh. MgSO 4 /NaCl, and 1 mL is taken for automated ITSP cleanup in parallel with 10 min LPGC analysis. In the former case, the UHPLC column is back-flushed with 1/1 (v/v) methanol/acetonitrile for 3 min between each injection to keep the system clean and avoid ghost peaks. Multi-level, multi-day validation results achieved 70-120% recoveries with RSDs < 20% for more than 80% of the analytes in hemp protein powder, oil, pellets, and fresh plant (dried hemp plant and flower were too complex). Limits of quantification (LOQs) were < 10 ng/g were achieved for nearly all pesticides, yielding 2.8% false negatives among >13,000 analyte results in the spiked samples. The QuEChERSER method was demonstrated to meet the challenge for several complex hemp matrices., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021. Published by Elsevier B.V.)

A high-throughput qualitative screening and identification method for 9 aminoglycosides of regulatory interest has been developed, validated, and implemented for bovine kidney, liver, and muscle tissues. The method involves extraction at previously validated conditions, cleanup using disposable pipette extraction, and analysis by a 3 min ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method. The drug analytes include neomycin, streptomycin, dihydrosptreptomycin, and spectinomycin, which have residue tolerances in bovine in the US, and kanamicin, gentamicin, apramycin, amikacin, and hygromycin, which do not have US tolerances established in bovine tissues. Tobramycin was used as an internal standard. An additional drug, paromomycin also was validated in the method, but it was dropped during implementation due to conversion of neomycin into paromomycin. Proposed fragmentation patterns for the monitored ions of each analyte were elucidated with the aid of high resolution MS using a quadrupole-time-of-flight instrument. Recoveries from spiking experiments at regulatory levels of concern showed that all analytes averaged 70-120% recoveries in all tissues, except hygromycin averaged 61% recovery. Lowest calibrated levels were as low as 0.005 μg/g in matrix extracts, which approximately corresponded to the limit of detection for screening purposes. Drug identifications at levels <0.05 μg/g were made in spiked and/or real samples for all analytes and tissues tested. Analyses of 60 samples from 20 slaughtered cattle previously screened positive for aminoglycosides showed that this method worked well in practice. The UHPLC-MS/MS method has several advantages compared to the previous microbial inhibition screening assay, especially for distinguishing individual drugs from a mixture and improving identification of gentamicin in tissue samples., (Published by Elsevier B.V.)

In this study, optimization, extension, and validation of a streamlined, qualitative and quantitative multiclass, multiresidue method was conducted to monitor >100 veterinary drug residues in meat using ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Optimization centered on extensive ruggedness evaluation of the method. Various clean-up sorbents were tested and the amount of co-extractives were weighed, matrix effects were measured using post-column infusion of representative analytes, the effect of extract dilution before injecting was studied, and analyte recoveries and reproducibilities were determined. In order to extend our previous method, more drug analytes were added that possessed a wider range of chemical properties, and a re-appraisal of different types of C18 in dispersive solid-phase extraction clean-up and mobile phases in UHPLC-MS/MS was done. Ultimately, end-capped C18 and post-column infusion of ammonium formate as an ionization enhancer for the late-eluting anthelmintics were found to give improved qualitative results for greater analytical scope. A multi-day, multi-analyst validation demonstrated that the final method is suitable for screening of 113 analytes, identifying 98 and quantifying (recoveries between 70-120% and RSD<25%) 87 out of the 127 tested drugs at or below US regulatory tolerance levels in bovine muscle., (Published by Elsevier B.V.)

A liquid chromatographic-tandem mass spectrometric (LC-MS/MS) multi-residue method for the simultaneous quantification and identification of 38 residues of the most widely used anthelmintic veterinary drugs (including benzimidazoles, macrocyclic lactones, and flukicides) in milk and liver has been developed and validated. For sample preparation, we used a simple modification of the QuEChERS method, which was initially developed for pesticide residue analysis. The method involved extracting sample (10 g) with acetonitrile (10 mL), followed by phase separation from water (salting out) with MgSO(4):NaCl (4:1, w/w). After centrifugation, an aliquot of the extract (1 mL) was purified by dispersive solid-phase extraction with MgSO(4) (150 mg) and C(18) (50mg), prior to LC-MS/MS analysis. Two injections of the same extract were required with the LC-MS/MS instrument to cover the 30 electrospray positive and 8 electrospray negative analytes. The limit of quantitation of the method was 5 microgkg(-1) for 37 analytes (and 10 microgkg(-1) for dichlorvos). The method was successfully validated according to the 2002/657/EC guidelines. Recovery of analytes was typically in the 70-120% range, with repeatabilities and reproducibilities typically <15% in milk and <20% in liver.

Rapid screening tests can be used as part of an efficient program designed to monitor veterinary drug residues in cattle. In this work, three rapid tests designed to screen samples for the presence of antibiotic residues, the Fast Antimicrobial Screen Test (FAST), Premi and Kidney Inhibition Swab (KIS) tests, were compared using beef kidney juice and serum samples. In order to provide a realistic assessment, potentially incurred samples of beef kidney juice and serum were obtained from 235 carcasses which had been retained by inspectors in a processing plant for further testing. In addition, liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis was conducted on these samples to identify what antibiotics were present, if any, and their levels. The comparison of the three rapid screening test results with those from LC-MS/MS analysis allowed for a more complete comparison of the relative sensitivity of these analytical methods, as well as valuable information on false positive and negative response rates.

A previously reported multiresidue method for the analysis of 11 important beta-lactams (amoxicillin, ampicillin, cefazolin, cephalexin, cloxacillin, desfuroylceftiofur cysteine disulfide (DCCD), deacetylcephapirin, dicloxacillin, nafcillin, oxacillin, and penicillin G) in bovine kidney has been further streamlined. The method is based on a simple extraction using acetonitrile-water (4:1, v/v), followed by dispersive solid-phase extraction clean-up with C(18) sorbent, concentration of an extract aliquot, and filtration of the final extracts using syringeless filter vials, which are used for the sample introduction in the liquid chromatographic-tandem mass spectrometric (LC-MS/MS) analysis. The recoveries have been improved by adding the internal standard [(13)C(6)]sulfamethazine to the homogenized sample before the extraction step, which enabled a proper control of the volume changes during the sample preparation. Average recoveries of fortified samples were 87-103% for all beta-lactams, except for DCCD, which had an average recovery of 60%. Based on the results of the stability study and LC mobile phase tests, methanol has been eliminated from the entire method, including the LC-MS/MS analysis. The best overall LC-MS/MS (electrospray positive ionization) performance was achieved by using 0.1% formic acid as an additive in both parts of the mobile phase, in water and in acetonitrile. To prevent carry-over in the LC-MS/MS analysis, the LC method was divided into two parts: one serving as an analytical method for injection of the sample and elution of the analytes and the other one, starting at a highly organic mobile phase composition, being dedicated for injection of a solvent, washing of the system, and equilibration of the column to the initial conditions of the analytical method. In this way, a blank solvent is injected after each sample, but these in-between injections contribute minimally to the overall sample throughput.