Search

It is known that the crystallizability of protein molecules may be improved by replacing their surface lysine residues with other residue types. Here an experimental method to identify surface lysine residues by NHS-biotin chemical modification combined with MALDI-TOF MS was proposed and was evaluated using PH1033 protein from Pyrococcus horikoshii. Interestingly, the biotinylation experiment with a protein-reagent molar ratio of 1:1 revealed that only seven of twenty-two lysine residues in the protein comprising 144 residues were labeled. To investigate the result, we analyzed structures from a molecular-dynamics simulation mimicking the experiment. A logistic regression analysis revealed that the biotinylation was significantly correlated with four factors relevant to the local environment of lysine residues: the solvent accessibility, the electrostatic energy, the number of hydrogen bonds, and the estimated pKa value. This result is overall in agreement with that from the same analysis on the crystal structure. However, reflecting the flexibility of the protein molecule in solution state, the factors except for the electrostatic energy were highly variable in the MD structures depending upon the protonation state of Tyr87. The present procedure of biotin-labeling can avoid lysine residues with extensive intramolecular interactions that are incompatible with the rational design of protein crystals., (Copyright © 2018 Elsevier Inc. All rights reserved.)

The ATP binding cassette (ABC) transporters, represent one of the largest superfamilies of primary transporters, which are very essential for various biological functions. The crystal structure of ATP-binding subunit of an ABC transporter from Geobacillus kaustophilus has been determined at 1.77 Å resolution. The crystal structure revealed that the protomer has two thick arms, (arm I and II), which resemble 'L' shape. The ATP-binding pocket is located close to the end of arm I. ATP molecule is docked into the active site of the protein. The dimeric crystal structure of ATP-binding subunit of ABC transporter from G. kaustophilus has been compared with the previously reported crystal structure of ATP-binding subunit of ABC transporter from Salmonella typhimurium., (Copyright © 2015 Elsevier Inc. All rights reserved.)

UDP-N-acetyl-d-mannosamine dehydrogenase (UDP-d-ManNAcDH) belongs to UDP-glucose/GDP-mannose dehydrogenase family and catalyzes Uridine-diphospho-N-acetyl-d-mannosamine (UDP-d-ManNAc) to Uridine-diphospho-N-acetyl-d-mannosaminuronic acid (UDP-d-ManNAcA) through twofold oxidation of NAD(+). In order to reveal the structural features of the Pyrococcus horikoshii UDP-d-ManNAcADH, we have determined the crystal structure of the product-bound enzyme by X-ray diffraction to resolution of 1.55Å. The protomer folds into three distinct domains; nucleotide binding domain (NBD), substrate binding domain (SBD) and oligomerization domain (OD, involved in the dimerization). The clear electron density of the UDP-d-ManNAcA is observed and the residues binding are identified for the first time. Crystal structures reveal a tight dimeric polymer chains with product-bound in all the structures. The catalytic residues Cys258 and Lys204 are conserved. The Cys258 acts as catalytic nucleophile and Lys204 as acid/base catalyst. The product is directly interacts with residues Arg211, Thr249, Arg244, Gly255, Arg289, Lys319 and Arg398. In addition, the structural parameters responsible for thermostability and oligomerization of the three dimensional structure are analyzed., (Copyright © 2014 Elsevier Inc. All rights reserved.)

In the L-Serine biosynthesis, D-3-phosphoglycerate dehydrogenase (PGDH) catalyzes the inter-conversion of D-3-phosphoglycerate to phosphohydroxypyruvate. PGDH belongs to 2-hydroxyacid dehydrogenases family. We have determined the crystal structures of PGDH from Sulfolobus tokodaii (StPGDH) and Pyrococcus horikoshii (PhPGDH) using X-ray diffraction to resolution of 1.77Å and 1.95Å, respectively. The PGDH protomer from both species exhibits identical structures, consisting of substrate binding domain and nucleotide binding domain. The residues and water molecules interacting with the NAD are identified. The catalytic triad residues Glu-His-Arg are highly conserved. The residues involved in the dimer interface and the structural features responsible for thermostability are evaluated. Overall, structures of PGDHs with two domains and histidine at the active site are categorized as type IIIH and such PGDHs structures having this type are reported for the first time., (Copyright © 2014 Elsevier Inc. All rights reserved.)

NADP(+) dependent isocitrate dehydrogenase (IDH) is an enzyme catalyzing oxidative decarboxylation of isocitrate into oxalosuccinate (intermediate) and finally the product α-ketoglutarate. The crystal structure of Thermus thermophilus isocitrate dehydrogenase (TtIDH) ternary complex with citrate and cofactor NADP(+) was determined using X-ray diffraction method to a resolution of 1.80 Å. The overall fold of this protein was resolved into large domain, small domain and a clasp domain. The monomeric structure reveals a novel terminal domain involved in dimerization, very unique and novel domain when compared to other IDH's. And, small domain and clasp domain showing significant differences when compared to other IDH's of the same sub-family. The structure of TtIDH reveals the absence of helix at the clasp domain, which is mainly involved in oligomerization in other IDH's. Also, helices/beta sheets are absent in the small domain, when compared to other IDH's of the same sub family. The overall TtIDH structure exhibits closed conformation with catalytic triad residues, Tyr144-Asp248-Lys191 are conserved. Oligomerization of the protein is quantized using interface area and subunit-subunit interactions between protomers. Overall, the TtIDH structure with novel terminal domain may be categorized as a first structure of subfamily of type IV., (Copyright © 2014 Elsevier Inc. All rights reserved.)

l-Gulonate 3-dehydrogenase (GDH) is a bifunctional dimeric protein that functions not only as an NAD(+)-dependent enzyme in the uronate cycle but also as a taxon-specific lambda-crystallin in rabbit lens. Here we report the first crystal structure of GDH in both apo form and NADH-bound holo form. The GDH protomer consists of two structural domains: the N-terminal domain with a Rossmann fold and the C-terminal domain with a novel helical fold. In the N-terminal domain of the NADH-bound structure, we identified 11 coenzyme-binding residues and found 2 distinct side-chain conformers of Ser124, which is a putative coenzyme/substrate-binding residue. A structural comparison between apo form and holo form and a mutagenesis study with E97Q mutant suggest an induced-fit mechanism upon coenzyme binding; coenzyme binding induces a conformational change in the coenzyme-binding residues Glu97 and Ser124 to switch their activation state from resting to active, which is required for the subsequent substrate recruitment. Subunit dimerization is mediated by numerous intersubunit interactions, including 22 hydrogen bonds and 104 residue pairs of van der Waals interactions, of which those between two cognate C-terminal domains are predominant. From a structure/sequence comparison within GDH homologues, a much greater degree of interprotomer interactions (both polar and hydrophobic) in the rabbit GDH would contribute to its higher thermostability, which may be relevant to the other function of this enzyme as lambda-crystallin, a constitutive structural protein in rabbit lens. The present crystal structures and amino acid mutagenesis studies assigned the role of active-site residues: catalytic base for His145 and substrate binding for Ser124, Cys125, Asn196, and Arg231. Notably, Arg231 participates in substrate binding from the other subunit of the GDH dimer, indicating the functional significance of the dimeric state. Proper orientation of the substrate-binding residues for catalysis is likely to be maintained by an interprotomer hydrogen-bonding network of residues Asn196, Gln199, and Arg231, suggesting a network-based substrate recognition of GDH., (Copyright (c) 2010 Elsevier Ltd. All rights reserved.)

Thermus thermophilus HB8 is a hyperthermophilic bacterium, thriving at environmental temperature near 80 degrees C. The genomic analysis of this bacterium predicted 18 genes for proteins belonging to the short-chain dehydrogenase/reductases (SDR) superfamily, but their functions remain unknown. A SDR encoded in a gene (TTHA0369) was chosen for functional and structural characterization. Enzymatic assays revealed that the recombinant tetrameric protein has a catalytic activity as NAD(+)-dependent aldose 1-dehydroganse, which accepts various aldoses such as d-fucose, d-galactose, d-glucose, l-arabinose, cellobiose and lactose. The enzyme also oxidized non-sugar alicyclic alcohols, and was competitively inhibited by hexestrol, 1,10-phenanthroline, 2,3-benzofuran and indole. The enzyme was stable at pH 2-13 and up to 85 degrees C. We have determined the crystal structure of the enzyme-NAD(+) binary complex at 1.65A resolution. The structure provided evidence for the strict coenzyme specificity and broad substrate specificity of the enzyme. Additionally, it has unusual features, aromatic-aromatic interactions among Phe141 and Phe249 in the subunit interface and hydrogen networks around the C-terminal Asp-Gly-Gly sequence at positions 242-244. Stability analysis of the mutant D242N, F141A and F249A enzymes indicated that the two unique structural features contribute to the hyperthermostability of the enzyme. This study demonstrates that aldose 1-dehydrogenase is a member of the SDR superfamily, and provides a novel structural basis of thermostability.

Glucose-6-phosphate isomerase (GPI) is a glycolytic enzyme with ill-defined oligomeric state. In order to obtain insight into the correlation between oligomerization and the catalytic function of this enzyme, the crystal structure of GPI from the extreme thermophile Thermus thermophilus HB8 (TtGPI) has been determined at 1.95 A resolution. The crystallographic asymmetric unit contains an apparent dimer. The core fold of protomer and the interprotomer spatial arrangement of the dimer are similar to those of already reported crystal structures of other GPIs. The active site is located on the dimer interface, and putative catalytic residues are well conserved among the GPIs. These results suggest that the observed dimeric state of TtGPI in the crystal is biologically relevant and that this enzyme uses a common catalytic mechanism for the isomerase reaction. Gel-filtration chromatography, chemical cross-linking, sedimentation equilibrium by analytical ultracentrifugation, and dynamic light-scattering experiments indicate that TtGPI exists in a dynamic equilibrium between monomeric and dimeric states in solution. Several factors potentially contributing to the thermal stability of TtGPI protomer were identified: (i) a decrease in denaturation entropy by the shorter polypeptide length and by amino acid composition, including the increased number of proline residues and a higher arginine-to-lysine ratio; (ii) a larger number of ion pairs; and (iii) a reduction in cavity volume. From these results, it is suggested that transient dimer formation is sufficient for the catalytic function and that the TtGPI protomer itself has intrinsically higher thermal stability.

Nonstandard nucleotide triphosphate pyrophosphatase (NTPase) can efficiently hydrolyze nonstandard purine nucleotides in the presence of divalent cations. The crystal structures of the NTPase from Pyrococcus horikoshii OT3 (PhNTPase) have been determined in two unliganded forms and in three liganded forms with inosine 5'-monophosphate (IMP), ITP and Mn(2+), which visualize the recognition of these ligands unambiguously. The overall structure of PhNTPase is similar to that of previously reported crystal structures of the NTPase from Methanococcus jannaschii and the human ITPase. They share a similar protomer folding with two domains and a similar homodimeric quaternary structure. The dimeric interface of NTPase is well conserved, and the dimeric state might be important to constitute the active site of this enzyme. A conformational analysis of the five snapshots of PhNTPase structures using the multiple superposition method reveals that IMP, ITP and Mn(2+) bind to the active site without inducing large local conformational changes, indicating that a combination of interdomain and interprotomer rigid-body shifts mainly describes the conformational change of PhNTPase. The interdomain and interprotomer conformations of the ITP liganded form are essentially the same as those observed in the unliganded form 1, indicating that ITP binding to PhNTPase in solution may follow the selection mode in which ITP binds to the subunit that happens to be in the conformation observed in the unliganded form 1. In contrast to the human ITPase inducing a large domain closure upon ITP binding, the interdomain active site cleft is generally closed in PhNTPase and only the IMP binding form shows a remarkable domain opening by 14 degrees only in the B subunit. The interprotomer rigid-body rotation of PhNTPase has a tendency to keep the dimeric 2-fold symmetry, which is also true in human ITPase, thereby suggesting its relevance to the positive cooperativity of the dimeric NTPases. The exception of this rule is observed in the IMP liganded form in which the dimeric 2-fold symmetry is broken by a 3 degrees interprotomer rotation in an unusual direction. A combination of the exceptional interdomain and interprotomer relocations is most likely the reason for the observed asymmetric IMP binding that might be necessary for PhNTPase to release the reaction product IMP.

Shikimate dehydrogenase (EC 1.1.1.25) catalyses the fourth step of the shikimate pathway which is required for the synthesis of the aromatic amino acids and other aromatic compounds in bacteria, microbial eukaryotes, and plants. The crystal structures of the shikimate dehydrogenase AroE from Thermus thermophilus HB8 in its ligand-free form, binary complexes with cofactor NADP+ or substrate shikimate, and the ternary complex with both NADP(H) and shikimate were determined by X-ray diffraction method at atomic resolutions. The crystals are nearly isomorphous with the asymmetric unit containing a dimer, each subunit of which has a bi-domain structure of compact alpha/beta sandwich folds. The two subunits of the enzyme display asymmetry in the crystals due to different relative orientations between the N- and C-terminal domains resulting in a slightly different closure of the interdomain clefts. NADP(H) is bound to the more closed form only. This closed conformation with apparent higher affinity to the cofactor is also observed in the unliganded crystal form, indicating that the NADP(H) binding to TtAroE may follow the selection mode where the cofactor binds to the subunit that happens to be in the closed conformation in solution. Crystal structures of the closed subunits with and without NADP(H) show no significant structural difference, suggesting that the cofactor binding to the closed subunit corresponds to the lock-and-key model in TtAroE. On the other hand, shikimate binds to both open and closed subunit conformers of both apo and NADP(H)-liganded holo enzyme forms. The ternary complex TtAroE:NADP(H):shikimate allows unambiguous visualization of the SDH permitting elucidation of the roles of conserved residues Lys64 and Asp100 in the hydride ion transfer between NADP(H) and shikimate.

Archaeal H(+)-ATPase (A-ATPase) is composed of an A(1) region that hydrolyzes ATP and an integral membrane part A(0) that conducts protons. Subunit E is a component of peripheral stator(s) that physically links A(1) and A(0) parts of the A-ATPase. Here we report the first crystal structure of subunit E of A-ATPase from Pyrococcus horikoshii OT3 at 1.85 A resolution. The protomer structure of subunit E represents a novel fold. The quaternary structure of subunit E is a homodimer, which may constitute the core part of the stator. To investigate the relationship with other stator subunit H, the complex of subunits EH was prepared and characterized using electrophoresis, mass spectrometry, N-terminal sequencing and circular dichroism spectroscopy, which revealed the polymeric and highly helical nature of the EH complex with equimolar stoichiometry of both the subunits. On the basis of the modular architecture of stator subunits, it is suggested that both cytoplasm and membrane sides of the EH complex may interact with other subunits to link A(1) and A(0) parts.

Biotin protein ligase (EC 6.3.4.15) catalyses the synthesis of an activated form of biotin, biotinyl-5'-AMP, from substrates biotin and ATP followed by biotinylation of the biotin carboxyl carrier protein subunit of acetyl-CoA carboxylase. The three-dimensional structure of biotin protein ligase from Pyrococcus horikoshii OT3 has been determined by X-ray diffraction at 1.6A resolution. The structure reveals a homodimer as the functional unit. Each subunit contains two domains, a larger N-terminal catalytic domain and a smaller C-terminal domain. The structural feature of the active site has been studied by determination of the crystal structures of complexes of the enzyme with biotin, ADP and the reaction intermediate biotinyl-5'-AMP at atomic resolution. This is the first report of the liganded structures of biotin protein ligase with nucleotide and biotinyl-5'-AMP. The structures of the unliganded and the liganded forms are isomorphous except for an ordering of the active site loop upon ligand binding. Catalytic binding sites are suitably arranged to minimize the conformational changes required during the reaction, as the pockets for biotin and nucleotide are located spatially adjacent to each other in a cleft of the catalytic domain and the pocket for biotinyl-5'-AMP binding mimics the combination of those of the substrates. The exact locations of the ligands and the active site residues allow us to propose a general scheme for the first step of the reaction carried out by biotin protein ligase in which the positively charged epsilon-amino group of Lys111 facilitates the nucleophilic attack on the ATP alpha-phosphate group by the biotin carboxyl oxygen atom and stabilizes the negatively charged intermediates.

3-Hydroxyisobutyrate, a central metabolite in the valine catabolic pathway, is reversibly oxidized to methylmalonate semialdehyde by a specific dehydrogenase belonging to the 3-hydroxyacid dehydrogenase family. To gain insight into the function of this enzyme at the atomic level, we have determined the first crystal structures of the 3-hydroxyisobutyrate dehydrogenase from Thermus thermophilus HB8: holo enzyme and sulfate ion complex. The crystal structures reveal a unique tetrameric oligomerization and a bound cofactor NADP+. This bacterial enzyme may adopt a novel cofactor-dependence on NADP, whereas NAD is preferred in eukaryotic enzymes. The protomer folds into two distinct domains with open/closed interdomain conformations. The cofactor NADP+ with syn nicotinamide and the sulfate ion are bound to distinct sites located at the interdomain cleft of the protomer through an induced-fit domain closure upon cofactor binding. From the structural comparison with the crystal structure of 6-phosphogluconate dehydrogenase, another member of the 3-hydroxyacid dehydrogenase family, it is suggested that the observed sulfate ion and the substrate 3-hydroxyisobutyrate share the same binding pocket. The observed oligomeric state might be important for the catalytic function through forming the active site involving two adjacent subunits, which seems to be conserved in the 3-hydroxyacid dehydrogenases. A kinetic study confirms that this enzyme has strict substrate specificity for 3-hydroxyisobutyrate and serine, but it cannot distinguish the chirality of the substrates. Lys165 is likely the catalytic residue of the enzyme.

Hot dog fold proteins sharing the characteristic "hot dog" fold are known to involve certain coenzyme A binding enzymes with various oligomeric states. In order to elucidate the oligomerization-function relationship of the hot dog fold proteins, crystal structures of the phenylacetate degradation protein PaaI from Thermus thermophilus HB8 (TtPaaI), a tetrameric acyl-CoA thioesterase with the hot dog fold, have been determined and compared with those of other family members. In the liganded crystal forms with coenzyme A derivatives, only two of four intersubunit catalytic pockets of the TtPaaI tetramer are occupied by the ligands. A detailed structural comparison between several liganded and unliganded forms reveals that a subtle rigid-body rearrangement of subunits within 2 degrees upon binding of the first two ligand molecules can induce a strict negative cooperativity to prevent further binding at the remaining two pockets, indicating that the so-called "half-of-the-sites reactivity" of oligomeric enzymes is visualized for the first time. Considering kinetic and mutational analyses together, a possible reaction mechanism of TtPaaI is proposed; one tetramer binds only two acyl-CoA molecules with a novel asymmetric induced-fit mechanism and carries out the hydrolysis according to a base-catalyzed reaction through activation of a water molecule by Asp48. From a structural comparison with other family members, it is concluded that a subgroup of the hot dog fold protein family, referred to as "asymmetric hot dog thioesterases" including medium chain acyl-CoA thioesterase II from Escherichia coli and human thioesterase III, might share the same oligomerization mode and the asymmetric induced-fit mechanism as observed in TtPaaI.

The crystal structure of the peroxidase (donor: H2O2 oxidoreductase, EC 1.11.1.7) from the hyphomycete Arthromyces ramosus (ARP) has been determined by the multiple isomorphous replacement method and refined by the simulated annealing method to a crystallographic R-factor of 17.4% for the 19,191 reflections with F > 2 sigma F between 7.0 and 1.9 A resolution. The model includes residues 9 to 344, the heme group, two N-acetylglucosamine residues, two calcium ions and 246 water molecules. The root-mean-square deviation of bond lengths from the ideal values is 0.02 A. The mean coordinate error is estimated as 0.2 A. The electron density of the glycine-rich region of the amino-terminal eight residues was invisible. ARP has ten major and two short alpha-helices and a few short beta-strands. The overall tertiary structure of ARP is similar to that of yeast cytochrome c peroxidase (CCP) and is particularly similar to that of the lignin peroxidase (LiP) from Phanerochaete chrysosporium. Relative to CCP, ARP and LiP each have an extension of approximately 40 residues at the carboxy terminus. All eight cysteine residues in ARP form disulfide bonds (C12:C24, C23:C293, C43:C129 and C257:C322). Two calcium sites are inaccessible to solvent. The four disulfide bonds and two calcium sites, which are lacking in CCP, are conserved in ARP and LiP. The bond from Asn304C to Ala305N in ARP is the site sensitive to proteases. An Asx turn present in the Asn303 to Ala305 segment appears to orient the side-chain of Asn304 to outward from the molecule, rendering it easily trappable by pockets of proteases. The proximal heme ligand is His184 in helix F (distance of N epsilon 2 ... Fe, 2.10 A), and one of several water molecules in the distal pocket of the heme bridges the iron atom and the N epsilon 2 of His56. The orientation of the imidazole ring of the distal histidine residue relative to the heme group in ARP differs significantly from that in LiP. The access channel to the distal side of the heme of ARP is markedly wider along the heme plane than that of LiP. Many of the amino acid residues that comprise the entrance of this channel differ for ARP and LiP. This may account for the differences in substrate specificity.