Search

In this work, vanadium pentoxide (V2O5) and titanium-modified V2O5 thin films were synthesized using the sol-gel spin coating route. The effect of Ti-doping concentration on the electrochromic optical properties and atomic/electronic structures of V2O5 smart thin films is examined. As the doping concentration of Ti increases, the surface roughness of the films is reduced. The structure of the films is analyzed using X-ray diffraction (XRD) and Raman spectroscopy, while the electrochromic modulation of atomic and electronic structures is elucidated through Raman and X-ray absorption spectroscopy (XAS) conducted during lithiation and delithiation. The XRD patterns demonstrate that an increase in Ti concentration leads to a more amorphous structure of the films and a shift of the main diffraction peak to a lower angle, attributable to the enlarged spacing between the stacking layers resulting from the incorporation of Ti ions. Soft X-ray absorption spectroscopy (XAS) and in situ hard XAS of the V L-edge, the O K-edge, and the V K-edge revealed a reduction in the charge state of V and local atomic structural symmetry modification upon lithated coloration and delithiated bleaching process. The critical insights provided by in situ XAS provides reveal that a small amount of Ti has the ability to modify the interlayer distance and local atomic structure of V2O5, thereby improving its electrochromic switching rate and stability when utilized in smart windows.

Herein, we fabricated a feasible and accurate sensing platform for the quantification of toxic organic pollutant 2-nitroaniline (2-NA) in water samples through electrocatalyst made up of bismuth molybdate (Bi2MoO6, BMO) functionalized carbon nanofiber (f-CNF) modified electrode. The preparation of BMO/f-CNF composite is of two methods, such as co-precipitation (C-BMO/f-CNF) and ultrasonication method (U-BMO/f-CNF). The physicochemical properties of the composites were characterized by XRD, FTIR, Raman, BET, FE-SEM, and HR-TEM techniques. At U-BMO/f-CNF, the charge transfer resistance was low (Rct = 12.47 Ω) compared to C-BMO/f-CNF because nanosized U-BMO particles correctly aim at the defective sites of the f-CNF surface wall. Further, the electrocatalytic activity of C&U-BMO/f-CNF composites was examined by cyclic voltammetry (CV) and differential pulse voltammetry techniques (DPV) for the electrochemical detection of 2-nitroaniline (2-NA). The U-BMO/f-CNF/GCE shows a higher cathodic current, wide dynamic linear range of 0.01–168.01 µM, and superior electrocatalytic activity with a low detection limit (0.0437 µM) and good sensitivity (0.6857 μA μM−1 cm−2). The excellent selectivity nature of U-BMO/f-CNF/GCE was observed in the presence of various organic pollutants and a few toxic metal cations. The practical applicability such as stability, repeatability towards 2-NA outcomes with accepted results. Besides, the practical viability of as proposed U-BMO/f-CNF sensor was investigated in soil and lake water samples delivers good recovery results. Hence from these analyses, we conclude that U-BMO/f-CNF/GCE potential for the determination of hazardous environmental pollutant 2-NA.