Search

Protein crystals with sufficiently large solvent pores can non-covalently adsorb polymers in the pores. In principle, if these polymers contain cell adhesion ligands, the polymer-laden crystals could present ligands to cells with tunable adhesion strength. Moreover, porous protein crystals can store an internal ligand reservoir, so that the surface can be replenished. In this study, we demonstrate that poly(ethylene glycol) terminated with a cyclic cell adhesion ligand peptide (PEG-RGD) can be loaded into porous protein crystals by diffusion. Through atomic force microscopy (AFM), force-distance correlations of the mechanical interactions between activated AFM tips and protein crystals were precisely measured. The activation of AFM tips allows the tips to interact with PEG-RGD that was pre-loaded in the protein crystal nanopores, mimicking how a cell might attach to and pull on the ligand through integrin receptors. The AFM experiments also simultaneously reveal the detailed morphology of the buffer-immersed nanoporous protein crystal surface. We also show that porous protein crystals (without and with loaded PEG-RGD) serve as suitable substrates for attachment and spreading of adipose-derived stem cells. This strategy can be used to design surfaces that non-covalently present multiple different ligands to cells with tunable adhesive strength for each ligand, and with an internal reservoir to replenish the precisely defined crystalline surface.

Carboxymethylcellulose (CMC) and keratin nanoparticle (KNP) hydrogels were obtained, characterized, and applied as drug delivery systems (DDSs) for the first time. Lyophilized CMC/KNP mixtures containing 10, 25, and 50 wt% of KNPs were kept at 170 °C for 90 min to crosslink CMC chains through a solid-state reaction with the KNPs. The hydrogels were characterized by infrared spectroscopy, thermal analyses, X-ray diffraction, mechanical measurements, and scanning electron microscopy. The infrared spectra indicated the formation of ester and amide linkages between crosslinked CMC and KNPs. The elastic modulus of the hydrogel containing 10 wt% KNPs was 2-fold higher than that of the hydrogel containing 50 wt% KNPs. The mechanical properties influenced the hydrogel stability and water uptake. The anti-inflammatory prednisolone (PRED) drug was incorporated into the hydrogels, and the release mechanism was investigated. The hydrogels supported PRED release by drug desorption for approximately 360 h. A sustained release mechanism was achieved. The CMC/KNP and CMC/KNP/PRED hydrogels were cytocompatible toward mammalian cells. The CMC/KNP/PRED set imparted the highest cell viability after 7 days of incubation. This study showed a straightforward procedure to create DDSs (chemically crosslinked) based on polysaccharides and proteins for efficient PRED delivery., Competing Interests: Declaration of competing interest The authors have no competing financial interests to declare or personal relationships that can influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Water-soluble luminescent lanthanide complexes that can be excited with visible light could enable rapid detection of toxic anions and cations in biological systems. Eu 3+ -induced hyaluronic acid-chitosan aggregates (EIHCA) can improve the stability, biocompatibility, efficiency, and light absorption of luminescent Eu 3+ complexes. Visible-range excitation may avoid phototoxicity associated with overexposure to UV light in biological and ecological applications. In this work, we synthesized and characterized series of EIHCA complexes having three N-donor heterocyclic ligands: 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (Dphen), 2,2': 6',2″-terpyridine (Tpy) and 1,10-phenanthroline monohydrate (Phen). These complexes possessed bright red fluorescence with a visible range excitation maximum. The photophysical properties of one formulation (we denote as EDL6) include fast quenching response (20 s) of the fluorescence, multi-selectivity, low limit of detection, and high quenching (K sv ) values, enabling selective, rapid and sensitive recognition of Cr 2 O 7 2- and Fe 3+ in aqueous solution. Furthermore, EDL6 exhibits cytocompatibility with mammalian cells that make these complexes promising biocompatible candidate as a safe replacement of organic fluorophores for fluorescence sensing applications. Thus, these new EIHCA complexes were successfully employed for the selective detection of hazardous materials in biological and aqueous environment samples., (Copyright © 2021. Published by Elsevier B.V.)

In this work free-standing gels formed from gellan gum (GG) by solvent evaporation are coated with polysaccharide-based polyelectrolyte multilayers, using the layer-by-layer approach. We show that PEMs composed of iota-carrageenan (CAR) and three different natural polycationic polymers have composition-dependent antimicrobial properties, and support mammalian cell growth. Cationic polymers (chitosan (CHT), N,N,N-trimethyl chitosan (TMC), and an amino-functionalized tannin derivative (TN)) are individually assembled with the anionic iota-carrageenan (CAR) at pH 5.0. PEMs (15-layers) are alternately deposited on the GG film. The GG film and coated GG films with PEMs are characterized by infrared spectroscopy with attenuated total reflectance (FTIR-ATR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and water contact angle (WCA) measurements. The TN/CAR coating provides a hydrophobic (WCA = 127°) and rough surface (R q = 243 ± 48 nm), and the TMC/CAR coating provides a hydrophilic surface (WCA = 78°) with the lowest roughness (R q = 97 ± 12 nm). Polymer coatings promote stability and durability of the GG film, and introduce antimicrobial properties against Gram-negative (Salmonella enteritidis) and Gram-positive (Staphylococcus aureus) bacteria. The films are also cytocompatible. Therefore, they have properties that can be further developed as wound dressings and food packaging., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Fluorescent lanthanide complexes have favorable features for fluorescence-based sensors compared to organic fluorophores and quantum dots. They exhibit very long fluorescence lifetimes, sharp emission bands, and stability with respect to photo-bleaching, without blinking. However, these complexes are usually hydrophobic, and many are excited by UV light, making them hazardous and incompatible with aqueous environments and biological samples. In this work, the strong fluorescent Eu 3+ -induced aggregates of polysaccharides (EIAP) was used to improve their aqueous solubility, and to tune the appropriate excitation wavelength in the visible range for avoiding toxicity of UV light in biological applications. The complexes exhibit bright fluorescence with an excitation maximum in the visible range, near 405 nm. EIAP 3 also exhibit rapid quenching response in the presence of transition metal ions. This enables the detection of Cu 2+ and Fe 3+ below 1 ppm. The reverse of quenching response of copper by the addition of a chelating agent makes it possible to recover the fluorescence property. Successfully, the EIAP exhibit cytocompatibility with mammalian cells. Thus, these new polysaccharide-based complexes have the potential for rapid, sensitive and selective metal ion sensors for the environmental systems., (Copyright © 2020. Published by Elsevier B.V.)

In this work, titania nanotube arrays (TiO 2 -NTs) were prepared by anodization, and the Eu(III) complexes (Eu (TTA) 3 phen with 2-thenoyltrifluoroacetone (TTA) and 1, 10-phenanthroline (phen)) were successfully coated onto the walls of the nanotubes. When a solution of glucose, cholesterol or triglycerides was dropped onto Eu(III) complex-modified TiO 2 -NTs, the fluorescence intensity of this material changes (glucose enhances fluorescence, cholesterol and triglycerides quench fluorescence). These phenomena are explained via an energy transfer process. The sensitivity of the fluorescence intensity to glucose, cholesterol or triglycerides concentration enables design of a multifunctional solid sheet-like detector. Under optimized experimental conditions, the change in fluorescence intensity ratio (ΔF/F 0 ) is linear with the concentration of glucose, cholesterol or triglycerides. To test the utility of the detector, glucose in orange juice, cholesterol in milk powder, and triglycerides in coconut oil were measured using this method and the results were in good agreement analytical data provided by a food testing company. The new method proposed here is simple, sensitive, reliable and suitable for practical applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

To develop hemocompatible surfaces, a cationic tannin derivate (TN) was used to prepare polyelectrolyte multilayers (PEMs) with the glycosaminoglycans heparin (HEP) and chondroitin sulfate (CS). The surface chemistry of the PEMs was characterized using X-ray photoelectron spectroscopy and water contact angle measurements. PEMs assembled with chitosan (CHI) and HEP or CS were used as controls. We investigate the hemocompatibility of PEMs by analyzing the adsorption of key blood serum proteins, adhesion and activation of platelets, and blood clotting kinetics. TN- and CHI-based PEMs adsorb similar amounts of albumin, whereas fibrinogen adsorption was more pronounced on TN-based PEMs, due to strong association with catechol groups. However, TN-based PEMs significantly reduce both platelet adhesion and platelet activation, while CHI-based PEMs promote platelet adhesion and activation. The whole-blood clotting kinetics assay also shows lower blood coagulation on TN-based PEMs. TN is an amphoteric, cationic, condensed tannin derivative with resonance structures. It also contains catechol groups, which are similar to those in mussel adhesive protein. These chemical features enable strong association with fibrinogen, which promotes the platelet-repelling effect. This study provides a new perspective for understanding platelet adhesion and activation on biomaterial surfaces, toward the development of new blood-compatible surfaces using a tannin derivative-based polymer., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

To obtain pectin-based films is challenging due to the aqueous instability of polyelectrolyte mixtures. We overcome this issue by blending chitosan to pectin of high O-methoxylation degree (56%), followed by solvent evaporation. A durable film containing 74 wt% pectin content was produced and used as an adsorbent material toward Cu(II) ions. Kinetic and adsorption equilibrium studies showed that the pseudo-second-order and Sips isotherm models adjusted well to the experimental data, respectively. Langmuir isotherm indicated a maximum adsorption capacity (q m ) for Cu(II) removal of 29.20 mg g -1 . Differential scanning calorimetry, contact angle measurements, and X-ray photoelectron spectroscopy confirm the adsorption. The chemisorption plays an essential role in the process; thereby, the film reusability is low. After adsorption, the cytocompatible film/Cu(II) pair prevents the proliferation of Escherichia coli., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Chemical modification of polysaccharides is an important route to enhance, develop or change polysaccharide properties. In this study, carboxymethylation of kappa-carrageenan (KC) with monochloroacetic acid was performed to achieve different degrees of substitution (DS) of carboxymethyl-kappa-carrageenan (CMKC). The degree of substitution ranged from 0.8 to 1.6 and was calculated from the 1 H NMR spectra. The chemical structure of the CMKCs was further characterized by FT-IR, and 13 C NMR. FT-IR confirmed the carboxymethylation. Carboxymethylation increased viscosity of KC in water and decreased viscosity of KC in synthetic human sweat. Tests with human adipose derived stem cells showed higher viability and lower cytotoxicity for CMKCs when compared to KC. CMKCs showed no hemolytic activity to human red blood cells. CMKCs have increased antioxidant activity compared to KC. In antibacterial assays, CMKCs with DS of 0.8, 1.0 and 1.2 exhibited growth inhibition against Staphylococcus aureus, Bacillus cereus, Escherichia coli and Pseudomonas aeruginosa. CMKC with DS ranging from 1.0 to 1.2 are good candidate biomaterials for cell-contacting applications., (Copyright © 2020 Elsevier B.V. All rights reserved.)

In plant spores and pollen, sporopollenin occurs as a structural polymer with remarkable resistance to chemical degradation. This recalcitrant polymer is well-suited to analysis by non-destructive infrared spectroscopy. However, existing infrared characterization of sporopollenin has been limited in scope and occasionally contradictory. This study provides a comprehensive structural analysis of sporopollenin in the Pinus ponderosa pollen exine using infrared spectroscopy, including detailed band assignments, descriptions of chemical reactivity, and comparison to multiple reference substances. We observe that the infrared spectral characteristics of sporopollenin prepared by enzymatic digestion of the polysaccharide-based intine are largely consistent with a copolymer of aliphatic lipids and trans-4-hydroxycinnamic acid, without distinct contributions from α-pyrone or carotenoid substructures., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

This study reports the synthesis, characterization and biological properties of films based on poly(vinyl alcohol) (PVA) and a cationic tannin polymer derivative (TN). Films are obtained from polymeric blends by tuning the PVA/TN weight ratios. The materials are characterized through infrared spectroscopy, X-ray photoelectron spectroscopy, contact angle measurements, mechanical analyses, and scanning electron microscopy. More hydrophilic surfaces are created by modulating the PVA and TN concentrations in the blends. Disintegration tests showed that the films present durability in phosphate buffer (pH 7.4) and low stability in simulated gastric fluid (pH 1.2). The film created at 90/10 PVA/TN weight ratio and crosslinked at 109 PVA/glutaraldehyde molar ratio (sample PVA10/TN10) supports the attachment and proliferation of bone marrow mesenchymal stem cells after 7 days of culture. The scaffolding capacity of the PVA10/TN10 surface is compared with titanium, one of the most important biomedical materials used in bone replacements. Also, the PVA/TN films exhibited cytocompatibility, antioxidant and antimicrobial activity against Staphylococcus aureus and Pseudomonas aeruginosa. These properties make PVA/TN films are candidates for biomedical applications in the tissue engineering field., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Ultralow protein fouling behavior is a common target for new high-performance materials. Ultralow fouling is often defined based on the amount of irreversibly adsorbed protein (< 5 ng cm -2 ) measured by a surface ensemble averaging method. However, protein adsorption at solid interfaces is a dynamic process involving multiple steps, which may include adsorption, desorption, and irreversible protein denaturation. In order to better optimize the performance of antifouling surfaces, it is imperative to fully understand how proteins interact with surfaces, including kinetics of adsorption and desorption, conformation, stability, and amount of adsorbed proteins. Defining ultralow fouling surfaces based on a measurement at or near the limit of detection of a surface-averaged measurement may not capture all of this behavior. Single-molecule microscopy techniques can resolve individual protein-surface interactions with high temporal and spatial resolution. This information can be used to tune the properties of surfaces to better resist protein adsorption. In this work, we demonstrate how combining surface plasmon resonance, X-ray photoelectron spectroscopy, atomic force microscopy, and single-molecule localization microscopy provides a more complete picture of protein adsorption on low fouling and ultralow fouling polyelectrolyte multilayer and polymer brush surfaces, over different regimes of protein concentration. In this case, comparing the surfaces using surface plasmon resonance alone is insufficient to rank their resistance to protein adsorption. Our results suggest a revision of the accepted definition of ultralow fouling surfaces is timely: with the advent of time-resolved studies of protein adsorption kinetics at the single-molecule level, it is neither necessary nor sufficient to rely on a surface averaging techniques to qualify ultralow fouling surfaces. Since protein adsorption is a dynamic process, understanding how surface properties affect the kinetics of protein adsorption will enable the design of future generations of advanced antifouling materials. STATEMENT OF SIGNIFICANCE: The design of ultralow fouling surfaces is often optimized based on a single surface-averaging technique measuring the amount of irreversibly adsorbed protein. This work provides a critical comparison of alternative techniques for evaluating protein adsorption on low fouling and ultralow fouling surfaces, and demonstrates how additional information about the dynamics of protein-surface interactions at the interface can be obtained by application of single-molecule microscopy. This approach could be used to better elucidate mechanisms of protein resistance and design principles for advanced ultralow fouling materials., (Copyright © 2019. Published by Elsevier Ltd.)

Here, we have demonstrated the production and characterization of hydrogel scaffolds based on chitosan/gellan gum (CS/GG) assemblies, without any covalent and metallic crosslinking agents, conventionally used to yield non-soluble polysaccharide-based materials. The polyelectrolyte complexes (physical hydrogels called as PECs) are characterized by Fourier-transform infrared spectroscopy, wide-angle X-ray scattering, and scanning electron microscopy. Hydrogels containing chitosan (CS) excesses (ranging from 60 to 80 wt%) were created. Durable polysaccharide-based scaffolds with structural homogeneity and interconnecting pore networks are developed by modulating the CS/GG weight ratio. The CS/GG hydrogel prepared at 80/20 CS/GG weight ratio (sample CS/GG80-20) is cytocompatible, supporting the attachment, growth, and spreading of bone marrow mesenchymal stem cells (BMSCs) after nine days of cell culture. The cytocompatibility is correlated to the swelling capacity of the PEC in PBS buffer (pH 7.4). By controlling the CS content, we can tune the water uptake of the material, enhancing the capacity to serve as a three-dimensional cell scaffold for BMSCs. This work presents for the first time that CS/GG hydrogels can be applied as scaffolds for tissue engineering purposes., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Here we report a new and straightforward method to yield durable polyelectrolyte complexes (hydrogel PECs) from gellan gum (GG) and chitosan (CS) assemblies, without metallic and covalent crosslinking agents, commonly used to produce GG and CS-based hydrogels, respectively. This new approach overcomes challenges of obtaining stable and durable GG-based hydrogels with structural homogeneity, avoiding precipitation and aqueous instability, typical of PEC-based materials. PECs are created by blending CS:GG solutions (at 60 °C) with GG:CS weight ratios between 80:20 to 40:60. X-ray photoelectron spectroscopy (XPS) analysis shows that CS-GG chains are interacting by electrostatic and intermolecular forces, conferring a high degree of association to the washed PECs, characteristic of self-assembling of polymer chains. The CS:GG weight ratio can be tuned to improve polyelectrolyte complex (PEC) high porosity, stability, porous homogeneity, and degradation rate. Physical and thermosensitive CS/GG-based hydrogels can have advantages over conventional materials produced by chemical processes., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Near-IR surface plasmon resonance is used to characterize Teflon AF films for refractive index-based detection of the aromatic hydrocarbon contaminants benzene, toluene, and xylenes in water. The technique requires no sample preparation, and film sensitivity is found to be enhanced by oxygen plasma etching. A diffusion equation model is used to extract the diffusion and partition coefficients, which indicate film enrichment factors exceeding two orders of magnitude, permitting a limit of detection of 183, 105 and 55 ppb for benzene, toluene, and xylenes, respectively. The effect of other potential interfering contaminants is quantified., (© 2013 Published by Elsevier B.V.)

Here we present a novel matrix-mimetic nanoassembly based on polysaccharides. Chitosan electrospun fiber networks are decorated with heparin-containing polyelectrolyte complex nanoparticles (PCNs) that present basic fibroblast growth factor (FGF-2), both stably adsorbed to the surfaces and released into solution. These FGF-2/PCN complexes can be released from the fibers with zero-order kinetics over a period of 30 days. Further modification of fibers with a single bilayer of polyelectrolyte multilayer (PEM) composed of N,N,N-trimethyl chitosan and heparin completely prevent release, and the FGF-2/PCN complexes are retained on the fibers for the duration of the release experiment (30 days). We also compare the mitogenic activity of these FGF-2/PCN complexes delivered in two different states: adsorbed to a surface and dissolved in solution. FGF-2/PCN complexes exhibit mitogenic activity with respect to ovine bone marrow-derived mesenchymal stem cells, even after being preconditioned by incubating for 27 days at 37°C in solution. However, when the FGF-2/PCN complexes are adsorbed to chitosan and coated with PEMs, the mitogenic activity of the FGF-2 steadily decreases with increasing preconditioning time. This work demonstrates a new system for stabilizing and controlling the delivery of heparin-binding growth factors, using polysaccharide-based matrix-mimetic nanomaterials. This work also contributes to our understanding of the preferred mode of growth factor delivery from porous scaffolds., (Copyright © 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

The influence of particle size on the activity and recycling capabilities of enzyme conjugated magnetic nanoparticles was studied. Co-precipitation and oxidation of Fe(OH)(2) methods were used to fabricate three different sizes of magnetic nanoparticles (5 nm, 26 nm and 51 nm). Glucose oxidase was covalently bound to the magnetic nanoparticles by modifying the surfaces with 3-(aminopropyl)triethoxysilane (APTES) and a common protein crosslinking agent, glutaraldehyde. Analysis by Transmission Electron Microscopy (TEM) showed that the morphology of the magnetic nanoparticles to be spherical and sizes agreed with results of the Brunauer, Emmett, and Teller (BET) method. Magnetic strength of the nanoparticles was analyzed by magnetometry and found to be 49 emu g(-1) (5 nm), 73 emu g(-1) (26 nm), and 85 emu g(-1) (51 nm). X-ray photoelectron spectroscopy (XPS) confirmed each step of the magnetic nanoparticle surface modification and successful glucose oxidase binding. The immobilized enzymes retained 15-23% of the native GOx activity. Recycling stability studies showed approximately 20% of activity loss for the large (51 nm) and medium (26 nm) size glucose oxidase-magnetic nanoparticle (GOx-MNP) bioconjugate and about 96% activity loss for the smallest GOx-MNP bioconjugate (5 nm) after ten cycles. The bioconjugates demonstrated equivalent total product conversions as a single reaction of an equivalent amount of the native enzyme after the 5th cycle for the 26 nm nanoparticles and the 7th cycle for the 51 nm nanoparticles., (Copyright © 2010 Elsevier B.V. All rights reserved.)

Nanofiber poly(epsilon-caprolactone) (PCL) scaffolds were fabricated by electrospinning, and their ability to enhance the osteoblastic behavior of marrow stromal cells (MSCs) in osteogenic media was investigated. MSCs were isolated from Wistar rats and cultured on nanofiber scaffolds to assess short-term cytocompatibility and long-term phenotypic behavior. Smooth PCL substrates were used as control surfaces. The short-term cytocompatibility results indicated that nanofiber scaffolds supported greater cell adhesion and viability compared with control surfaces. In osteogenic conditions, MSCs cultured on nanofiber scaffolds also displayed increased levels of alkaline phosphatase activity for 3 weeks of culture. Calcium phosphate mineralization was substantially accelerated on nanofiber scaffolds compared to control surfaces as indicated through von Kossa and calcium staining, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Increased levels of intra- and extracellular levels of osteocalcin and osteopontin were observed on nanofiber scaffolds using immunofluorescence techniques after 3 weeks of culture. These results demonstrate the enhanced tissue regeneration property of nanofiber scaffolds, which may be of potential use for engineering osteogenic scaffolds for orthopedic applications., (Copyright 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Nanoscale chemical and topographical features have been demonstrated to influence a variety of significant responses of mammalian cells to biomaterials surfaces. Thus, an important goal for biomaterials scientists is the ability to engineer the nanoscale surface features of biologically active materials. The goal of the current work is to demonstrate that polyelectrolyte complex nanoparticles (PCNs) in polyelectrolyte multilayers (PEMs) can be combined to create surfaces with controlled nanoscale surface topography and nanoscale presentation of surface chemistry. The polysaccharides used in this work are the biomedically relevant chitosan, heparin, and hyaluronan. Nanostructured surface coatings were characterized on both modified gold substrates and tissue-culture polystyrene surfaces. PCNs were adsorbed to oppositely charged PEMs, and were also embedded within PEMs. The construction of the surface coatings was characterized by quartz crystal microbalance with dissipation (QCM-D). The surface morphology was characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The chemistry of the coatings was confirmed by both X-ray photoelectron spectroscopy (XPS) and polarization modulation infra-red reflection absorption spectroscopy (PM-IRRAS). Morphologically, we found that PCNs were colloidally stable and homogeneously distributed when adsorbed on or in the PEMs. Chemical analysis confirms that the PCNs adsorbed to PEMs significantly altered the surface chemistry, indicating significant surface coverage. Furthermore, the position of the PCNs normal to the surface can be adjusted by adding PEMs on top of adsorbed PCNs. Thus, PCNs can be used to introduce discrete nanoscale surface topographical features and varying surface chemistry into PEM surface coatings in a controlled way., (2010 Elsevier B.V. All rights reserved.)

For humans, companion animals, and food producing animals, vaccination has been touted as the most successful medical intervention for the prevention of disease in the twentieth century. However, vaccination is not without problems. With the development of new and less reactogenic vaccine antigens, which take advantage of molecular recombinant technologies, also comes the need for more effective adjuvants that will facilitate the induction of adaptive immune responses. Furthermore, current vaccine adjuvants are successful at generating humoral or antibody mediated protection but many diseases currently plaguing humans and animals, such as tuberculosis and malaria, require cell mediated immunity for adequate protection. A comprehensive discussion is presented of current vaccine adjuvants, their effects on the induction of immune responses, and vaccine adjuvants that have shown promise in recent literature.

The activation of surfaces by covalent attachment of bioactive moieties is an important strategy for improving the performance of biomedical materials. Such techniques have also been used as tools to study cellular responses to particular chemistries of interest. The creation of gradients of covalently bound chemistries is a logical extension of this technique. Gradient surfaces may permit the rapid screening of a large range of concentrations in a single experiment. In addition, the biological response to the gradient itself may provide new information on receptor requirements and cell signaling. The current work describes a rapid and flexible technique for the covalent addition of bioactive peptide gradients to a surface or gel and a simple fluorescence technique for assaying the gradient. In this technique, bioactive peptides with a terminal cysteine are bound via a heterobifunctional coupling agent to primary amine-containing surfaces and gels. A gradient in the coupling agent is created on the surfaces or gels by varying the residence time of the coupling agent across the surface or gel, thereby controlling the extent of reaction. We demonstrate this technique using poly(l-lysine)-coated glass surfaces and fibrin gels. Once the surface or gel has been activated by the addition of the coupling agent gradient, the bioactive peptide is added. Quantitation of the gradient is achieved by measuring the reaction kinetics of the coupling agent with the surface or gel of interest. This can be done either by fluorescently labeling the coupling agent (in the case of surfaces) or by spectrophotometrically detecting the release of pyridine-2-thione, which is produced when the thiol-reactive portion of the coupling agent reacts. By these methods, we can obtain reasonably precise estimates for the peptide gradients without using expensive spectroscopic or radiolabeling techniques. Validation with changes in fibroblast cell migration behavior across a bioactive peptide gradient illustrates preservation of peptide function as well as the usefulness of this technique.