Search

Background: Monoclonal antibodies (mAbs) undergo multiple post-translational modifications (PTMs) during production and storage, resulting for instance in charge and oxidized variants. PTMs need to be assessed as critical quality attributes to assure protein quality and safety. Capillary zone electrophoresis (CZE) enables efficient charge-based separation. The CZE method developed by He et al. (2011) is currently applied routinely in the pharmaceutical industry for profiling charge heterogeneity of mAbs. However, as the method relies on a non-volatile background electrolyte (BGE), it cannot be directly hyphenated with mass spectrometry (MS), hampering the identification of separated charge variants., Results: This study presents a CZE-UV/MS method using a neutral static capillary coating of hydroxypropyl methylcellulose combined with a volatile BGE at pH 5.0 to allow for MS-compatible mAb charge variant separations. The effect of several parameters, including pH and concentration of the BGE, applied voltage, and injected mAb concentrations on separation performance was investigated using a panel of commercially available mAbs. The optimized method was evaluated with IgG 1 and IgG 4 mAbs of varying pI (7.4-9.2) and degrees of heterogeneity. Basic and acidic variants were separated from the parent mAb using a BGE of 50 mM acetic acid adjusted to pH 5.0 with ammonium hydroxide. The relative abundances of charge variants determined with the new method showed a good correlation with the corresponding relative levels obtained with the method of He et al. CZE-MS coupling was accomplished using the nanoCEasy, a low-flow sheath liquid interface, which enabled the identification and quantitation of basic, acidic, and incomplete pyroglutamate variants, and glycoforms of the tested mAbs., Significance: This manuscript describes a new CZE-MS method that permits heterogeneity assessment of mAbs under MS-compatible conditions, providing charge variant separation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Immunoglobulin light chain amyloidosis (AL) is a life-threatening disease caused by the deposition of light chain (LC) and its fragments containing variable (V L ) and portions of constant (C L ) domains. AL patients feature either monoclonal free LCs (FLCs) circulating as covalent and noncovalent homodimers, or monoclonal immunoglobulin (Ig) wherein the LC and heavy chain (HC) form disulfide-linked heterodimers, or both. The role of full-length Ig in AL amyloidosis is unclear as prior studies focused on FLC or V L domain. We used a mammalian cell-based expression system to generate four AL patient-derived full-length IgGs, two non-AL IgG controls, and six corresponding FLC proteins derived from an IGLV6-57 germline precursor. Comparison of proteins' secondary structure, thermal stability, proteolytic susceptibility, and disulfide link reduction suggested the importance of local vs. global conformational stability. Analysis of IgGs vs. corresponding FLCs using hydrogen-deuterium exchange mass spectrometry revealed major differences in the local conformation/dynamics of the C L domain. In all IgGs vs. FLCs, segments containing β-strand and α-helix βA C -αA C B C were more dynamic/exposed while segment βD C -βE C was less dynamic/exposed. Notably, these segments overlapped proteolysis-prone regions whose in vivo cleavage generates LC fragments found in AL deposits. Altogether, the results suggest that preferential cleavage in segments βA C -αA C B C of FLC or βD C -βE C of LC in IgG helps generate amyloid protein precursors. We propose that protecting these segments using small-molecule stabilizers, which bind to the interfacial cavities C L -C L in FLC and/or C L -C H1 in IgG, is a potential therapeutic strategy to complement current approaches targeting V L -V L or V L -C L stabilization of LC dimer., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Development of fresh solid phase extractant is critical for selective separation and purification of special proteins. Herein, we demonstrated a recombinant Staphylococcal Protein G (rSPG) with a His-tag modified the novel single-metal organic framework (rSPG@Ni-MOF-74). The proposed solid-phase extraction material possessed a uniform spindle-shaped structure, large surface area (709.60 m 2  g -1 ) and pore volume (0.08 m 3  g -1 ), high metal content (22.57 wt%), which facilitated the interaction between host and guest. As results, the composite displayed outstanding selective recognition and adsorption of IgG, due to synergistic effect of the binding ability of rSPG with the Fc region of IgG, maintained through hydrogen bonding and electrostatic attraction, as well as hydrophobic interaction. The adsorption performance and mechanism of rSPG@Ni-MOF-74 have been fully investigated. Additionally, the rSPG@Ni-MOF-74 composite could effectively separate IgG from serum obtained from healthy humans, with the purity of the separated IgG verified through SDS-PAGE analysis. Furthermore, LC-MS/MS analysis identified a high content of IgG (55.3 %) in the eluate from rSPG@Ni-MOF-74, suggesting the great potential of rSPG@Ni-MOF-74 in IgG separation and enrichment from complex matrix., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Protein glycosylation acts as a crucial role in regulating protein function and maintaining cellular homeostasis. Efficient peptide enrichment can be utilized to effectively solve the inherent challenges of protein glycosylation analysis to search unknown cancer biomarkers. In this research, a low dimensional porous hydrophilic nanosheets with a multi-level porous structure (Co-MOF-SiO 2 @HA) was synthetized via an easy one-pot method for the efficient enrichment of the N-glycopeptides in the digests of complex biosamples. The synthetized nanosheets Co-MOF-SiO 2 @HA demonstrated excellent enriching performances including a high enrichment capacity (300 mg g -1 calculated), a spectacular selectivity (IgG digests and BSA digests at the molar ratio of 1/1200), and an excellent spatial confinement ability (IgG digests, IgG and BSA at the molar ratio of 1/1000/1000). As an explore result, after the enrichment of human colorectal cancer tissue and human healthy tissue by the nanosheets, several proteins related to cancers and one protein directly related to well-known human colorectal cancer were identified by detecting the corresponding glycopeptides. It presented the potential value of the feasibility of this analysis mode by nanosheets Co-MOF-SiO 2 @HA in proteomic analysis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Background: Observational studies support that altered immunoglobulin G (IgG) N-glycosylation and inflammatory factors are associated with cardiometabolic diseases (CMDs); nevertheless, the causality between them remains unclear., Methods: Two-sample Mendelian randomization (MR) analyses were conducted to systematically investigate the bidirectional causality between IgG N-glycans and nine CMDs in both East Asians and Europeans., Results: In the forward MR analysis, the univariable MR analysis presented suggestive causality of 14 and eight genetically instrumented IgG N-glycans with CMDs in East Asians and Europeans, respectively; the multivariable MR analysis showed that ten and 11 pairs of glycan-CMD associations were identified in East Asian and European populations, respectively. In the reverse MR analysis, based on East Asians and Europeans, the univariable MR analysis presented suggestive causality of seven and 12 genetically instrumented CMDs with IgG N-glycans, respectively; the multivariable MR analysis presented that six and five CMD-glycan causality were found in East Asian and Europeans, respectively., Conclusions: The comprehensive MR analyses provide suggestive evidence of bidirectional causality between IgG N-glycans and CMDs. This work helps to understand the molecular mechanism of the occurrence/progression of CMDs, optimize existing and develop new strategies to prevent CMDs, and contribute to the early identification of high-risk groups of CMDs., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The amplification strategies used for self-powered biosensor based on biofuel cell (BFC-SPB) need to be further developed. Because the currently developed strategies utilized the complicated hybridization of DNA or poorly readable current signal of capacitors for amplification, which limits the practical application in public health emergencies. Here, we present a facile chemical amplification strategy for BFC-SPB. The 5-min amplification was triggered by simply adding H 2 O 2 solution dropwise to the sensing cathode after the formation of the immune sandwich. The Ag NP of immunoprobe were oxidized to Ag(I), which can be served as the electron acceptor of the cathode. The amount of immunoprobe was positively correlated with that of the antigen, resulting in corresponding and high concentration of Ag(I) after the amplification, which enhanced the ability of the cathode as the electron acceptor. Meanwhile the glucose oxidation reaction (GOR) was performed on the bioanode modified with glucose oxidase (GOx). After assembling the bioanode and sensing cathode, the open circuit voltage of the BFC-SPB, measured by digital multimeter, distinctly rised with the elevated concentration of the antigen. To demonstrate the proof of concept, immunoglobulin G (IgG), selecting as a model analyte, was sensitively detected using this method. Result indicated that the limit of detection was 4.4 fg mL -1 (0.03 amol mL -1 ) in the linear range of 1 pg mL -1 -10 μg mL -1 . This work initiates a brand-new way of chemical amplification strategy for BFC-SPB, and offers a promising platform for practical applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Immunoglobulin G (IgG) exhibits potent antiviral, antibacterial, and immunological activities. The digestion process and bioavailability of IgG are often a concern. Dietary hydrocolloids are crucial for regulating healthy digestion and the bioavailability of protein as functional components. Understanding the effects of dietary hydrocolloids on the digestive kinetics of IgG is requisite. Herein, the pepsin and trypsin digestion of IgG was investigated using ordered porous layer interferometry (OPLI). The real-time variation in the interference spectral shift reflected by OPLI can be converted into changes in the optical thickness (OT) to obtain a degradation kinetics curve. The impact of dietary hydrocolloids, including alginic acid sodium salt (ALG), polydextrose (PD), and konjac glucomannan (KG), on IgG degradation was evaluated using OPLI. The results demonstrated that ALG significantly inhibited the degradation of IgG by pepsin under acidic conditions, whereas the addition of PD increased the Michaelis-Menten constant for IgG degradation by trypsin. Notably, this dependence is not based on the hydrocolloid viscosity, but relies more on the electrical properties. The study enhances our understanding of how hydrocolloids affect IgG digestion and could provide valuable insights into preserving IgG activity and facilitating the development of oral drugs or health products related to IgG., Competing Interests: Declaration of competing interest The authors declare that they have no competing financial interests., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Accurate and sensitive determination of human immunoglobulin G (HIgG) level is critical for diagnosis and treatment of various diseases, including rheumatoid arthritis, humoral immunodeficiencies, and infectious disease. In this study, versatile tri-signal probes were developed by preparing CdS@SiO 2 nanorods that integrate photoluminescence (PL), multi-phonon resonant Raman scattering (MRRS) and infrared absorption (IRA) properties. Through the coating of multiple CdS nanoparticles as cores within SiO 2 shells, the PL and MRRS properties of CdS were improved, resulting in a significantly lowered limit of detection (LOD), with the lowest LOD of 12.37 ag mL -1 . Integration with the distinctive IRA property of SiO 2 shells widened the detection range towards higher concentrations, establishing a final linear range of 50 ag mL -1 to 10 μg mL -1 . The remarkable consistency among the three signals highlighted the robust internal verification capability for accurate detection. This approach enhances flexibility in selecting detection methodologies to suit diverse scenarios, facilitating HIgG detection. The tri-signal nanoprobes also exhibited excellent detection selectivity, specificity and repeatability. This study presents a fresh idea for developing high-performance detection strategies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The efficient and accurate separation of immunoglobulin G (IgG) plays a vital role for disease diagnosis and therapy, but it is always hampered by the huge geometric size and complex structure of IgG. In this work, an amorphous Fe/Co bimetallic organic framework (denoted as PMOF-Fe/Co) is fabricated for IgG separation, with octa-carboxyl polyhedral oligomeric silsesquioxane (OCPOSS) as modulator for the first time. Benefiting from the rigid nanostructure and competitive coordination of OCPOSS, the aperture of PMOF-Fe/Co is enlarged to ∼20 nm along with the generation of enormous structural defects, which enables the accommodation of protein species with high molecular weights and large sizes. OCPOSS is also found exerting a positive impact on mediating the specific recognition and adsorption ability of PMOF-Fe/Co towards IgG through metal affinity, hydrophilic and hydrophobic interactions. Consequently, the multimode and multivalent affinity of PMOF-Fe/Co gives rise to an extraordinary adsorption capacity (2691.7 mg g -1 ) and satisfactory practical application performance. This study is convinced to provide a simple avenue for the efficient separation of specific large-sized proteins, as well as the engineering of abiotic affinity reagents with compositional and architectural complexity., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Surface Plasmon Resonance (SPR) technology has revolutionized the study of affinity-based biomolecular interactions, offering label-free and real-time analysis capabilities. However, traditional SPR gold chips have been viewed as disposable due to challenges in post-use reconditioning, leading to significant resource wastage and increased costs. To address this issue, we propose a novel approach utilizing polynorepinephrine-based (PNE) Molecularly Imprinted Bio-Polymers (MIBPs) as alternative receptors to conventional antibodies. Self-adhesive MIBPs do not require covalent immobilization. This enables efficient and rapid chip functionalization and post-use removal, facilitating multiple reuses of the plasmon source without compromising analytical performance. We conducted a thorough characterization and data analysis, confirming the robustness and repeatability of a single MIBP-functionalized chip for human IgG detection. 10 cycles of reconditioning and reuse, assayed by 60 kinetic calibrations, were performed. Our findings demonstrate the potential indefinite reuse of SPR chips facilitated by PNE MIBPs, with implications for streamlining test development and routine implementation in SPR biosensing applications. Therefore, they represent a sustainable solution to the longstanding challenge of disposable SPR gold chips also by reducing the reliance on animal-derived Abs for bioanalytic testing. Being also extremely low-cost and green, PNE-based MIBPs minimize the ecological footprint associated with traditional SPR assays. Overall, our work represents a significant advancement towards the development of reusable SPR biosensors. It promises a more sustainable and cost-effective future for biomedical research and diagnostic applications, with application on other transducers and bioanalytical platforms., Competing Interests: Declaration of competing interest The authors declare that they have no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Covalent and oriented immobilization of antibodies (Abs) can substantially improve the sensitivity and stability of solid-phase immunoassays. By modifying the natural Abs with functional groups that provide unique handles for further conjugation, Abs could be immobilized onto the solid matrices with uniform orientation. Herein, an effective approach for Fc-specific modification of Abs was developed for the oriented and covalent immobilization of Abs. Twelve photoreactive Z-domain variants, incorporated with a photoactivable probe (p-benzoyl-L-phenylalanine, Bpa) at different positions and carrying a C-terminal Cys-tag (i.e. Z Bpa -Cys variants), were individually constructed and produced in Escherichia coli and tested for photo-cross-linking to various IgGs. The different Z Bpa -Cys variants demonstrated large differences in photo-conjugation efficiency for the tested IgGs. The conjugation efficiencies of 17th Z Bpa -Cys ranged from 90 % to nearly 100 % for rabbit IgG and mouse IgG 2a , IgG 2b and IgG 3 . Other variants, including 5th Z Bpa -Cys, 18th Z Bpa -Cys, 32th Z Bpa -Cys, and 35th Z Bpa -Cys, also displayed conjugation efficiencies of 61 %-83 % for mouse IgG 1 , IgG 2a and IgG 3 . Subsequently, the photo-modified Abs, namely IgG-Cys conjugates, were covalently immobilized onto a maleimide group-functionalized solid-phase carrier on the basis of the reaction of sulfhydryl and maleimide. Thus, a generic platform for the controlled and oriented immobilization of Abs was developed, and the efficacy and potential of the proposed approach for sensitive immunoassays was demonstrated by detecting human α-fetoprotein., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In previous publications we have described the pISep dual simultaneous, independent gradients (DSIGs) liquid chromatography (LC) for uncoupling gradients of non-buffering solute (NaCl, urea or acetonitrile) from externally generated pH gradients. In DSIGs the shape and slope of the [salute] gradient does not depend on the shape and slope of the pH gradient. The technique allows in a single run true simultaneous two dimensional LC separation of complex protein mixtures on various stationary phases including anion, cation exchangers (AEX, CEX), reversed phase (RP), mixed mode and mixed bed. Using a humanized IgG 1 (HIgG 1 ) monoclonal antibody (MAb) and a variety of pH & [NaCl] DSIGs, we show that most of MAb isoforms can be successfully separated from each other. These experimental observations are supported by an initial theoretical argument presented here predicting an overall improvement of all MAb isoforms separation by DSIGs of pH & [NaCl]. Theoretical calculations predict that, in general, there exists an optimal non-zero isocratic salt concentration in a pH gradient separation that will resolve isoforms close in binding energy, but a wide range of salt concentrations will be required for acceptable resolution of all isoforms. Theory also predicts better separation of weaker rather than stronger binding isoforms. Experimentally, we have found that no one set of DSIGs LC conditions could optimally baseline resolve all identifiable MAb isoforms in a single run of reasonable duration. The versatility and simplicity of the pH & [NaCl] pISep DSIGs LC allows fast, automated scouting of protein separations over any range of pH from 2.4 to 10.8 and [NaCl] from 0 to 1 M without changing the chemistry of the buffering system. Due to the universal applicability of the pISep buffering system in IEX LC, the researcher is given a powerful tool to easily develop pH & [NaCl] DSIGs protocols that vary mobile phase compositions to achieve high resolution separations of targeted proteins., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Allen Hirsh reports financial support and administrative support were provided by Biomedical Research Institute. Allen Hirsh has patent #7,425,263 issued to Cryobiophysica, Inc. Allen Hirsh has patent #7,790,025 issued to Cryobiophysica, Inc. Allen Hirsh has patent #8,298,413 pending to Cryobiophysica, Inc. There are no other conflicts of interest If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Fluorescently labeled antibodies are widely used to visualize the adsorption process in protein chromatography using confocal laser scanning microscopy (CLSM), but also as a tracer for determination of residence time distribution (RTD) in continuous chromatography. It is assumed that the labeled protein is inert and representative of the unlabeled antibody, ignoring the fact that labeling with a fluorescent dye can change the characteristics of the original molecule. It became evident that the fluorescently labeled antibody has a higher affinity toward protein A resins such as MabSelect Sure. This can be due to slight differences in hydrophobicity and net charge, which are caused by the addition of the fluorescent dye. However, this difference is eliminated when using high salt concentrations in the adsorption studies. In this work, the site occupancy of two labeled antibodies, MAb1 (IgG1 subclass) and MAb2 (IgG2 subclass) conjugated with the fluorescent dye Alexa Fluor™ 488 was elucidated by intact mass spectrometry (MS) and peptide mapping LC-MS/MS, employing a sequential cleavage with Endoproteinase Lys-C and trypsin and in parallel with chymotrypsin alone. It was shown that the main binding site for the dye was a specific lysine in the heavy chains of the MAb1 and MAb2 molecules, in positions 188 and 189 respectively. Other lysine residues distributed throughout the protein sequence were labeled to a lot lesser extent. The labeled antibody had a slightly different affinity to MabSelect Sure although its primary binding site (to Protein A) was not affected by labeling, despite the secondary region responsible for binding to the protein A was partly labeled. Overall, the fluorescent-labeled antibodies are a good compromise as an inert tracer in residence time distribution and chromatography studies because they are much cheaper than isotope-labeled antibodies; However, the differences between the labeled and unlabeled antibodies should be considered., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. The author Alois Jungbauer is an Editorial Board Member for Journal of Chromatography A and was not involved in the editorial review or the decision to publish this article., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

The developed asymmetric monovalent bispecific IgG1 or Duet monoclonal antibody (Duet mAb) has two distinct fragment antigen-binding region (Fab) subunits that target two different epitope specificities sequentially or simultaneously. The design features include unique engineered disulfide bridges, knob-into-hole mutations, and kappa and lambda chains to produce Duet mAbs. These make it structurally and functionally complex, so one expects challenging developability linked to instability, degradation of products and pathways, and limited reports available. Here, we have treated the product with different sources of extreme stress over a lengthy period, including varying heat, pH, photo stress, chemical oxidative stress, accelerated stress in physiological conditions, and forced glycation conditions. The effects of different stress conditions on the product were assessed using various analytical characterization tools to measure product-related substances, post-translational modifications (PTMs), structural integrity, higher-order disulfide linkages, and biological activity. The results revealed degradation products and pathways of Duet mAb. A moderate increase in size, charge, and hydrophobic variants, PTMs, including deamidation, oxidation, isomerization, and glycation were observed, with most conditions exhibiting biological activity. In addition, the characterization of fractionated charge variants, including deamidated species, showed satisfactory biological activity. This study demonstrated the prominent stability of the Duet mAb format comparable to most marketed mAbs., Competing Interests: Declaration of competing interest All authors are or were employees of AstraZeneca and may hold stock ownership or interests in the company. Yasunori Watanabe and Lydia Dewis were employees of AstraZeneca during experiments and manuscript compilation., (Copyright © 2024 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

In conventional chromatographic ligand screening, underperforming ligands are often dismissed. However, this practice may inadvertently overlook potential opportunities. This study aims to investigate whether these underperforming ligands can be repurposed as valuable assets. Hydrophobic charge-induction chromatography (HCIC) is chosen as the validation target for its potential as an innovative chromatographic mode. A novel dual-ligand approach is employed, combining two suboptimal ligands (5-Aminobenzimidazole and Tryptamine) to explore enhanced performance and optimization prospects. Various dual-ligand HCIC resins with different ligand densities were synthesized by adjusting the ligand ratio and concentration. The resins were characterized to assess appearance, functional groups, and pore features using SEM, FTIR, and ISEC techniques. Performance assessments were conducted using single-ligand mode resins as controls, evaluating the selectivity against human immunoglobulin G and human serum albumin. Static adsorption experiments were performed to understand pH and salt influence on adsorption. Breakthrough experiments were conducted to assess dynamic adsorption capacity of the novel resin. Finally, chromatographic separation using human serum was performed to evaluate the purity and yield of the resin. Results indicated that the dual-ligand HCIC resin designed for human antibodies demonstrates exceptional selectivity, surpassing not only single ligand states but also outperforming certain high-performing ligand types, particularly under specific salt and pH conditions. Ultimately, a high yield of 83.9 % and purity of 96.7 % were achieved in the separation of hIgG from human serum with the dual-ligand HCIC, significantly superior to the single-ligand resins. In conclusion, through rational design and proper operational conditions, the dual-ligand mode can revitalize underutilized ligands, potentially introducing novel and promising chromatographic modes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Designing modified therapeutic antibodies with enhanced FcRn-binding affinity holds promise in the extension of circulation half-lives and potential refinement of pharmacokinetics. During the development of these new-generation therapeutic antibodies, FcRn binding affinity of IgGs is emphasized and monitored as a critical quality attribute (CQA), alongside other critical assessments including titer and aggregation level. However, the traditional workflow for assessing the overall quality of expressed IgGs in harvested cell culture fluid (HCCF) is blamed to be cumbersome and time-consuming. This study presents an integrated methodology for the rapid quality assessment of IgGs in HCCF by selectively extracting IgGs with favorable high FcRn affinity for subsequent analysis using size exclusion chromatography (SEC). The approach utilizes innovative adsorbents known as FcRn immobilized hydrophilic magnetic graphene (MG@PDA@PAMAM-FcRn) in a magnetic solid-phase extraction (MSPE) process. To simulate the in vivo binding dynamics, MSPE binding and dissociation was performed at pH 6.0 and 7.4, respectively. The composite have demonstrated enhanced extraction efficiency and impurity removal ability in comparison to commercially available magnetic beads. The SEC monomer peak area value provides the output of this method, the ranking of which enabled the facile identification of superior HCCF samples with high overall quality of IgG. Optimization of MSPE parameters was performed, and the method was validated for specificity, precision, sensitivity, and accuracy. The proposed method exhibited an analytical time of 0.6 h, which is 7-22 times shortened in comparison to the conventional workflow., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

3D printing offers the unprecedented ability to fabricate chromatography stationary phases with bespoke 3D morphology as opposed to traditional packed beds of spherical beads. The restricted range of printable materials compatible with chromatography is considered a setback for its industrial implementation. Recently, we proposed a novel ink that exhibits favourable printing performance (printing time ∼100 mL/h, resolution ∼200 µm) and broadens the possibilities for a range of chromatography applications thanks to its customisable surface chemistry. In this work, this ink was used to fabricate 3D printed ordered columns with 300 µm channels for the capture and polishing of therapeutic monoclonal antibodies. The columns were initially assessed for leachables and extractables, revealing no material propensity for leaching. Columns were then functionalised with protein A and SO 3 ligands to obtain affinity and strong cation exchangers, respectively. 3D printed protein A columns showed >85 % IgG recovery from harvested cell culture fluid with purities above 98 %. Column reusability was evaluated over 20 cycles showing unaffected performance. Eluate samples were analysed for co-eluted protein A fragments, host cell protein and aggregates. Results demonstrate excellent HCP clearance (logarithmic reduction value of > 2.5) and protein A leakage in the range of commercial affinity resins (<100 ng/mg). SO 3 functionalised columns employed for polishing achieved removal of leaked Protein A (down to 10 ng/mg) to meet regulatory expectations of product purity. This work is the first implementation of 3D printed columns for mAb purification and provides strong evidence for their potential in industrial bioseparations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Particle size is a critical parameter of chromatographic resins that significantly affects protein separation. In this study, effects of resin particle sizes (31.26 μm, 59.85 μm and 85.22 μm named Aga-31, Aga-60 and Aga-85, respectively) on antibody adsorption capacity and separation performance of a hybrid biomimetic ligand were evaluated. Their performance was investigated through static adsorption and breakthrough assays to quantify static and dynamic binding capacity (Q max and DBC). The static adsorption results revealed that the Q max for hIgG was 152 mg/g resin with Aga-31, 151 mg/g resin with Aga-60, and 125 mg/g resin with Aga-85. Moreover, the DBC at 10% breakthrough for hIgG with a residence time of 2 min was determined to be 49.4 mg/mL for Aga-31, 45.9 mg/mL for Aga-60, and 38.9 mg/mL for Aga-85. The resins with smaller particle sizes exhibited significantly higher capacity compared to typical commercial agarose resins and a Protein A resin (MabSelect SuRe). Furthermore, the Aga-31 resin with the hybrid biomimetic ligand demonstrated exceptional performance in terms of IgG purity (>98%) and recovery (>96%) after undergoing 20 separation cycles from CHO cell supernatant. These findings are helpful in further chromatographic resin design for the industrial application of antibody separation and purification., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Developing a knob-into-hole asymmetric bispecific IgG1 monoclonal antibody (mAb) poses manufacturing challenges due to the expression of chain pairing variants, also called mispaired species, in the desired product. The incorrect pairing of light and heavy chains could result in heterogeneous mispaired species of homodimers, heterodimers, light chain swapping, and low molecular weight species (LMWS). Standard chromatography, capillary electrophoretic, or spectroscopic methods poorly resolve these from the main variants. Here, we report a highly sensitive reverse-phase polyphenyl ultra-high-performance liquid chromatography (RP-UHPLC) method to accurately measure mispaired species of Duet mAb format, an asymmetric IgG1 bispecific mAb, for both process development and quality control analytical tests. Coupled with electrospray ionization mass spectrometry (ESI-MS), it enabled direct online characterization of mispaired species. This single direct assay detected diverse mispaired IgG-like species and LMWS. The method resolved eight disulfide bonds dissociated LMWS and three mispaired LMWS. It also resolved three different types of IgG-like mispaired species, including two homodimers and one heterodimer. The characterization and quantification simultaneously enabled the cell line selection that produces a lesser heterogeneity and lower levels of mispaired species with the desired correctly paired product. The biological activity assessment of samples with increased levels of these species quantified by the method exhibited a linear decline in potency with increasing levels of mispaired species in the desired product. We also demonstrated the utility of the technique for testing in-process intermediate materials to determine and assess downstream purification process capability in removing diverse mispaired IgG-like species and LMWS to a certain level during the downstream purification process. Our investigation demonstrates that adopting this method was vital in developing asymmetric bispecific mAb from the initial stage of cell line development to manufacturing process development. Therefore, this tool could be used in the control strategy to monitor and control mispaired species during manufacturing, thus improving the quality control of the final product., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: ‘All authors are or were employees of AstraZeneca and may hold stock ownership or interests in the company. Yasunori Watanabe, Lydia Dewis, and Nikola Lonska were employees of AstraZeneca during experiments and manuscript compilation. reports financial support was provided by AstraZeneca UK Limited. All authors are or were employees of AstraZeneca and may hold stock ownership or interests in the company. Yasunori Watanabe, Lydia Dewis, and Nikola Lonska were employees of AstraZeneca during experiments and manuscript compilation. reports a relationship with AstraZeneca UK Limited that includes: employment. All authors are or were employees of AstraZeneca and may hold stock ownership or interests in the company. Yasunori Watanabe, Lydia Dewis, and Nikola Lonska were employees of AstraZeneca during experiments and manuscript compilation. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.’., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Immunoglobulin G (IgG) is the most common monoclonal antibody (mAb) grown for therapeutic applications. While IgG is often selectively isolated from cell lines using protein A (ProA) chromatography, this is only a stepping stone for complete characterization. Further classification can be obtained from weak cation exchange chromatography (WCX) to determine IgG charge variant distributions. The charge variants of monoclonal antibodies can influence the stability and efficacy in vivo, and deviations in charge heterogeneity are often cell-specific and sensitive to upstream process variability. Current methods to characterize IgG charge variants are often performed off-line, meaning that the IgG eluate from the ProA separation is collected, diluted to adjust the pH, and then transferred to the WCX separation, adding time, complexity, and potential contamination to the sample analysis process. More recently, reports have appeared to streamline this separation using in-line two-dimensional liquid chromatography (2D-LC). Presented here is a novel, 2D-LC coupling of ProA in the first dimension ( 1 D) and WCX in the second dimension ( 2 D) chromatography. As anticipated, the initial direct column coupling proved to be challenging due to the pH incompatibility between the mobile phases for the two stages. To solve the solvent compatibility issue, a size exclusion column was placed in the switching valve loop of the 2D-LC instrument to act as a means for the on-line solvent exchange. The efficacy of the methodology presented was confirmed through a charge variant determination using the NIST monoclonal antibody standard (NIST mAb), yielding correct acidic, main, and basic variant compositions. The methodology was employed to determine the charge variant profile of IgG from an in-house cultured Chinese hamster ovary (CHO) cell supernatant. It is believed that this methodology can be easily implemented to provide higher-throughput assessment of IgG charge variants for process monitoring and cell line development., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: R. Kenneth Marcus reports financial support was provided by National Science Foundation. Sarah W. Harcum reports financial support was provided by National Science Foundation. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The percentage of trisulfide variants is a product quality metric that is monitored during the manufacture of monoclonal antibody (mAb)-based therapeutics. Results from earlier preclinical studies revealed that trisulfide linkages in mAbs are rapidly converted to disulfides in circulation. In this study, casirivimab and imdevimab, which are both IgG1 subclass mAbs that target the non-overlapping epitopes in SARS-CoV2 Spike protein, are used as models to study the kinetics of trisulfide-to-disulfide conversion in vivo in human circulation. To determine the percentage of trisulfide variants in systemic circulation immediately after intravenous injection, both mAbs were immunoprecipitated from serum samples collected from COVID-19 patients that received this cocktail antibody treatment as part of a first-in-human study. The immunoprecipitated mAbs were then digested under non-reducing conditions and evaluated by liquid-chromatography-mass spectrometry (LC-MS). Significant reductions in the percentages of trisulfide variants were observed in serum samples as early as 1 hr after completion of the intravenous infusion. A flow-through dialysis model designed to mimic the redox potential of blood revealed a plausible chemical mechanism for the rapid trisulfide-to-disulfide conversion of IgG1 subclass mAbs under physiological conditions., Competing Interests: Declaration of Competing Interest Note: The authors declare no competing financial interest(s)., (Copyright © 2023 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

A novel solid phase extractant His-rSPG@ZIF-8 was prepared by covalently coupling recombinant streptococcal protein G (His-rSPG) with ZIF-8. The His-rSPG@ZIF-8 composite was characterized by Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy (Raman), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Due to the specific binding between the immunoglobulin binding region of His-rSPG and the Fc region of immunoglobulin G (IgG), the His-rSPG@ZIF-8 composite demonstrated exceptional selectivity in adsorbing IgG. In Britton-Robinson buffer (BR buffer) with a salt concentration of 500 mmol L -1 (0.04 mol L -1 , pH 8.0), the His-rSPG@ZIF-8 composite exhibited a remarkable adsorption efficiency of 99.8 % for 0.05 mg of the composite on 200 μL of IgG solution (100 μg mL -1 ). The adsorption behavior of the His-rSPG@ZIF-8 composite aligns with the Langmuir adsorption model, and the theoretical maximum adsorption capacity is 1428.6 mg g -1 . The adsorbed IgG molecules were successfully eluted using a SDS solution (0.5 %, m/m), resulting in a recovery rate of 91.2 %. Indeed, the His-rSPG@ZIF-8 composite was successfully utilized for the isolation and purification of IgG from human serum samples. The obtained IgG exhibited high purity, as confirmed by SDS-PAGE analysis. Additionally, LC-MS/MS analysis was employed to identify the human serum proteins following the adsorption and elution process using the His-rSPG@ZIF-8 composite material. The results revealed that the recovered solution contained an impressive content of immunoglobulin, accounting for 62.4 % of the total protein content. Furthermore, this process also led to the significant enrichment of low abundance proteins such as Serpin B4 and Cofilin-1. Consequently, the His-rSPG@ZIF-8 composite holds great promise for applications such as IgG purification and immunoassays. At the same time, it expands the application of metal-organic frameworks in the field of proteomics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Mass spectrometry (MS)-based glycoproteomics research requires additional sample pretreatment to improve the effective identification of low-abundance glycopeptides without interference from non-glycoproteins. Herein, an attractive strategy using resorcinol-formaldehyde (RF) resin and zirconium-based coordination polymer (Zr-BCP) was established to prepare one-dimensional porous coordination polymer composites for glycopeptide enrichment before MS analysis. The obtained Fe 3 O 4 @RF@Zr-BCP nanochains feature excellent magnetic response (42.26 emu/g), high hydrophilicity (16.0°), and large specific surface area (140.84 m 2 /g), which provides abundant affinity sites for specific capture of glycopeptides. The materials exhibit outstanding performance in the enrichment of glycopeptides in terms of sensitivity (15 fmol/μL IgG), selectivity (1:200, molar ratio of IgG/BSA), loading capacity (200 mg/g) and recovery (106.4 ± 3.5%). In addition, the developed method based on Fe 3 O 4 @RF@Zr-BCP has been successfully applied to capture glycopeptides in tryptic digest of mouse teratoma cell extracts. It is worth emphasizing that compared with dispersed nanoparticles, the one-dimensional chain structure brings extraordinary reusability to Fe 3 O 4 @RF@Zr-BCP nanochains, which is conducive to the rapid cyclic enrichment of glycopeptides. This present work provides a potential enrichment platform for comprehensive glycoprotein analysis, and opens a new avenue for the application of oriented-assembly nanochains., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Antibody-drug conjugates (ADCs) combine the selectivity of antibodies with the cytotoxicity of drug payloads to yield highly targeted and potent therapeutics. Owing to the need to chemically modify residues for attachment of the payload and their more complex structure compared to either component alone, ADCs can present additional challenges related to stability of the final drug product. Here, we report for the first time the use of high-throughput experimental screens and computational techniques to tune the conformational and colloidal behavior of a monomethyl auristatin F-based ADC. The ADC, which exhibits high opalescence with strongly attractive protein-protein interactions, is transformed into a more stable structure by experimentally traversing a library of more than ∼100 formulations. A significant reduction in turbidity and increase in diffusion interaction parameter is observed by varying properties such as pH and ionic strength. Computational modeling rationalized these changes and pointed to the presence of attractive electrostatic interactions between ADC molecules facilitated by the drug payload and histidine residues. Taken together, the experimental and computational work presented provides a general roadmap of studies to perform during ADC development to find stable formulations, while the mechanistic learnings can be applied towards the design and stabilization of other IgG1-based ADCs., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

Ovalbumin (OVA) was modified by fructose (Fru) and galactose (Gal) to study the structure, IgG/IgE binding capacity and effects on human intestinal microbiota of the conjugated products. Compared with OVA-Fru, OVA-Gal has a lower IgG/IgE binding capacity. The reduction of OVA is not only associated with the glycation of R84, K92, K206, K263, K322 and R381 in the linear epitopes, but also with conformational epitope changes, manifested as secondary and tertiary structural changes caused by Gal glycation. In addition, OVA-Gal could alter the structure and abundance of gut microbiota at phylum, family, and genus levels and restore the abundance of bacteria associated with allergenicity, such as Barnesiella, Christensenellaceae&#95;R-7&#95;group, and Collinsela, thereby reducing allergic reactions. These results indicate that OVA-Gal glycation can reduce the IgE binding capacity of OVA and change the structure of human intestinal microbiota. Therefore, Gal glycation may be a potential method to reduce protein allergenicity., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. Ji-hua Mao and Kai Zhang are co-first authors of the article., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Background: N-glycans in glycoproteins can affect physicochemical properties of proteins; however, some reported N-glycan structures are inconsistent depending on the type of glycoprotein or the preparation methods., Objective: To obtain consistent results for qualitative and quantitative analyses of N-glycans, N-glycans obtained by different preparation methods were compared for two types of mammalian glycoproteins., Methods: N-glycans are released by peptide-N-glycosidase F (PF) or A (PA) from two model mammalian glycoproteins, bovine fetuin (with three glycosylation sites) and human IgG (with a single glycosylation site), and labeled with a fluorescent tag [2-aminobenzamide (AB) or procainamide (ProA)]. The structure and quantity of each N-glycan were determined using UPLC and LC-MS/MS., Results: The 21 N-glycans in fetuin and another 21 N-glycans in IgG by either PF-ProA or PA-ProA were identified using LC-MS/MS. The N-glycans in fetuin (8-13 N-glycans were previously reported) and in IgG (19 N-glycans were previously reported), which could not be identified by using the widely used PF-AB, were all identified by using PF-ProA or PA-ProA. The quantities (%) of the N-glycans (>0.1 %) relative to the total amount of N-glycans (100 %) obtained by AB- and ProA-labeling using LC-MS/MS had a similar tendency. However, the absolute quantities (pmol) of the N-glycans estimated using UPLC and LC-MS/MS were more efficiently determined with ProA-labeling than with AB-labeling. Thus, PF-ProA or PA-ProA allows for more effective identification and quantification of N-glycans than PF-AB in glycoprotein, particularly bovine fetuin. This study is the first comparative analysis for the identification and relative and absolute quantification of N-glycans in glycoproteins with PF-ProA and PA-ProA using UPLC and LC-MS/MS., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

High-performance porous materials and rational enrichment strategies are crucial during sample pretreatment process in glycoproteomics analysis. Herein, we report a dual-phase separation strategy based on hydrophobic and hydrophilic mesoporous covalent-organic framework (COF) microspheres for high-purity glycopeptide enrichment for the first time. The COF microspheres (about 1.8±0.5 μm) with hydrophobic mesopores (2.5 nm) were prepared by a facile method at room temperature. Through the post-synthesis modification strategy, hydrophilic mesopores were obtained by modifying the vinyl ligands with glutathione (GSH), and the hydrophilic properties of COF microspheres were further enhanced by the introduction of Au nanoparticles and GSH to obtain the hydrophilic COF microspheres (denoted as COF@Au-GSH). The low-abundance hydrophilic glycopeptides could be efficiently enriched by the hydrophilic COF@Au-GSH microspheres in low polar solutions after the high-abundance hydrophobic non-glycopeptides were removed with the hydrophobic COF microspheres in high polar solutions. With the help of dual-phase separation strategy and inherent properties of the COF structure, the as-prepared COF microspheres showed splendid enrichment performance for glycopeptides, including ultrahigh sensitivity (2 fmol, IgG digests), extremely high specificity (1:10000, IgG digests/BSA digests), excellent size selectivity (1:500:500, IgG digests/BSA/IgG), and large binding capacity (200 mg g -1 , IgG digests). In addition, a total of 1993 glycopeptides could be enriched and identified from the rat liver digests after enrichment by the COF microspheres. As a proof of concept application, the proposed strategy was successfully used in sample pretreatment process for plasma glycoproteomic analysis., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022. Published by Elsevier B.V.)

During early stage development of a therapeutic IgG1 monoclonal antibody, high levels of low molecular weight (LMW) peaks were observed by high performance size-exclusion chromatography and capillary electrophoresis. Further characterization of the LMW peak enriched HPSEC fractions using reversed phase liquid chromatography coupled to mass spectrometry showed these LMW species were 47 kDa and 50 kDa in size. However, the measured masses could not be matched to any fragments resulting from peptide bond hydrolysis. To identify these unknown LMW species, molecular characterization methods were employed, including high-throughput sequencing of RNA. Transcriptomic analysis revealed the LMW species were generated by mis-splicing events in the heavy chain transcript, which produced truncated heavy chain products that assembled with the light chain to mimic the appearance of fragments identified by routine purity assays. In an effort to improve product quality, an optimized purification process was developed. Characterization of the process intermediates confirmed removal of both LMW species by the optimized process. Our study demonstrates that deep-dive analytical characterization of biotherapeutics is critical to ensure product quality and inform process development. Transcriptomic analysis tools can help identify the cause of unknown species, and plays a key role in product and process characterization., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: This work was supported by the global biologics R&D arm of AstraZeneca. Authors J.A.D., C.H., L.G., N.M., J.W., D.H., and W.X. are employees of AstraZeneca and have stock and/or stock interests or options in AstraZeneca., (Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.)

Fragment antigen-binding (Fab) has several advantages in the treatment and diagnosis of some diseases. The lack of highly efficient affinity chromatography platform creates a purification bottleneck for the downstream processing of Fab-based products, which raises the urgent need for a novel immunoglobin G (IgG)-binding domain (IgBD) with both high affinity and broad specificity for Fab. SpG C3Fab RR (designated C Fab ) was previously identified as a Fab-selective IgBD, which triggered our interest in evaluating the potential of C Fab for Fab purification. However, we found that monomeric C Fab showed weak Fab-binding. To increase its affinity, a self-trimerizing domain (tri) was fused to C Fab to produce C Fab -tri. It was found that C Fab -tri existed as a trimer and showed promising binding to Fab derived from IgG of humans, rhesus monkeys, mice, rats, and rabbits. Affinity chromatography demonstrated that the recovery rates of Fab derived from IgG of humans, rats, mice, and rabbits by C Fab -tri-HP column were 2- to 5-fold of those by protein G-HP column. Human Fab was effectively purified by both protein L- and C Fab -tri-HP column. However, unlike C Fab -tri-HP column, protein L-HP column was inefficient for purification of Fab derived from IgG of rats, mice, and rabbits. Notably, rat Fab spiked into the extract of Escherichia coli (E. coli) was effectively recovered by C Fab -tri-HP column. These results indicate that C Fab -tri outperforms protein G and protein L as a ligand for Fab purification, and C Fab -tri-based affinity chromatography might be developed as a novel platform for Fab purification., Competing Interests: Declaration of Competing Interest The authors declare no competing interests., (Copyright © 2022. Published by Elsevier B.V.)

IgG Fc fragments that expose regulatory rheumatoid factor epitopes (regRF epitopes) have emerged as a promising immunosuppressive drug. Immunization of rats with such Fc fragments reduced symptoms of experimental autoimmune diseases. The immunosuppressive effect of Fc fragments is based on stimulating the production of regRF, which kills activated CD4 T lymphocytes. The formation of regRF epitopes on Fc fragments was previously shown to be associated with a reduction in disulfide bonds in the fragments' hinge region. However, the structure of Fc fragments that bear regRF epitopes remained largely unclear. Infrared spectra were compared for lyophilized Fc fragments displaying regRF epitopes and Fc fragments without such epitopes. FTIR spectroscopy found no differences in the amide I, amide II, and amide III bands, indicating that there are no distinctive features in the secondary structure of Fc fragments bearing regRF epitopes. The distinctive feature of Fc fragments bearing regRF epitopes, irrespective of whether the free SH groups in the hinge were preserved or lost after lyophilization, is the presence of a band or a fine structure in the region containing the bending vibrations of the SH groups. Furthermore, the Fc fragments with regRF epitopes differ from those without in that they have a band in the absorption region of aromatic amino acid rings. Taken together, these facts suggest that the appearance of regRF epitopes results from changes in the tertiary structure of the hinge and the domains that occur when the hinge is reduced, and they also indicate that these conformational changes are resistant to subsequent changes in the state of cysteine residues in the hinge. Bands in the regions of aromatic amino acids and the bending vibrations of SH groups are markers of the presence of regRF epitopes on IgG Fc fragments. FTIR spectroscopy can be used to detect these epitopes., (Copyright © 2022 Elsevier B.V. All rights reserved.)

IgG N-glycans levels change with advancing age, making it a potential biomarker of aging. β-1,4-galactosyltransferase (B4GALT) gene expression levels also increase with aging. Ultra performance liquid chromatography (UPLC) was used to examine changes inserum IgG N-glycans at six time points during the aging process. Most serum IgG N-glycans changed with aging in WT but not in CD19-cre B4GALT1 floxed mice. The relative abundance of fucosylated biantennary glycans with or without Neu5Gc structures changed with aging in heterozygous B4GALT1 floxed mice but not in homozygous B4GALT1 floxed mice. Additionally, the aging phenotype was more apparent in WT mice than in B4GALT1 floxed mice. These results demonstrate that fucosylated biantennary glycans and fucosylated biantennary glycans containing N-glycolylneuraminic acid (Neu5Gc)-linked N-acetyllactosamine (LacNAc) were highly associated with aging and were affected by the B4GALT1 floxed mouse genotype. The changing levels of fucosylated monoantennary glycans observed with aging in WT mice was reversed in B4GALT1 floxed mice and was not sex specific. In summary, B-cell-specific ablation of B4GALT1 from a glycoproteomic perspective prevented age-related changes in IgG N-glycans in mice. SIGNIFICANCE: In this study, serum IgG glycoproteomic data in wild-type (WT) and B-cell-specific ablation of β-1,4-galactosyltransferase 1 mice (B4GALT) were analyzed. Results showed that fucosylated biantennary glycans with or without N-glycolylneuraminic acid (Neu5Gc)-linked N-acetyllactosamine (LacNAc) were highly associated with aging and were also affected by the B4GALT1 floxed mouse genotype. In terms of gender-specific information, the trend towards elevated fucosylated monoantennary glycans in WT mice was not seen in CD19-cre B4GALT1 floxed mice in either sex. B-cell-specific ablation of B4GALT1 plays an important role in age-related glycan changes; its specific functions and mechanisms are worthy of in-depth study. Our data suggest that investigating the relationship between galactosylation and aging may help advance the field of glycoproteomics and aging research., Competing Interests: Declaration of Competing Interest The authors declare no competing financial interest., (Copyright © 2022. Published by Elsevier B.V.)

Glycosylation is one of the most ubiquitous post-translational modifications (PTM) of proteins. Although the ionization efficiency of native glycans is fairly low, with the assistance of chemical derivation strategies, mass spectrometry (MS) has been extensively used in glycomics because of its high sensitivity, accuracy, and speed. In this study, a novel glycan labelling reagent, (4-hydrazidebutyl) triphenylphosphonium bromide (P 4 HZD), with a permanent positive charge was developed. The comprehensive capabilities of P 4 HZD for MS analysis of oligosaccharides were evaluated in detail using maltodextrin as a standard. This labelling reagent can be used in common biological MS techniques such as matrix-assisted laser desorption ionization (MALDI) and electrospray ionization (ESI) mass spectrometry. The MS signal intensity of maltodextrin species could be enhanced up to 96-fold in MALDI-MS by labelling with P 4 HZD, making P 4 HZD favorable for MALDI-MS-based high-throughput screening of oligosaccharides. Moreover, P 4 HZD-labelled oligosaccharides with a degree of polymerization (DP) from 1 to 18 could be separated and analysed by capillary electrophoresis (CE) combined with positive ion mode ESI-MS. In comparison with a commercialized oligosaccharide tag, Girard's reagent P (GirP), P 4 HZD was more effective for enhancing the signal of oligosaccharides in the middle or higher mass range using both ESI and MALDI ion sources. Two biologics, immunoglobulin G 2 (IgG 2) and fusion protein (FP), were chosen as model complex biological samples to test the efficacy of detection and separation of oligosaccharides by MALDI-MS and CE-ESI-MS analysis with P 4 HZD labelling. The results indicated that P 4 HZD is a promising labelling reagent for the detection of oligosaccharides in complex biological samples. The tandem workflow combines the strengths of MALDI-MS and CE-ESI-MS to fulfil the analytical demands of high-throughput screening, while affording good separation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Monoclonal antibodies, particularly IgGs and Ig-based molecules, are a well-established and growing class of biotherapeutic drugs. In order to improve efficacy, potency and pharmacokinetics of these therapeutic drugs, pharmaceutical industries have investigated significantly in engineering fragment crystallizable (Fc) domain of these drugs to optimize the interactions of these drugs and Fc gamma receptors (FcγRs) in recent ten years. The biological function of the therapeutics with the antibody-dependent cellular cytotoxicity (ADCC) enhanced double mutation (S239D/I332E) of isotype IgG1, the ADCC reduced double mutation (L234A/L235A) of isotype IgG1, and ADCC reduced isotype IgG4 has been well understood. However, limited information regarding the effect of these mutations or isotype difference on physicochemical properties (PCP), developability, and manufacturability of therapeutics bearing these different Fc regions is available. In this report, we systematically characterize the effects of the mutations and IgG4 isotype on conformation stability, colloidal stability, solubility, and storage stability at accelerated conditions in two buffer systems using six Fc variants. Our results provide a basis for selecting appropriate Fc region during development of IgG or Ig-based therapeutics and predicting effect of the mutations on CMC development process., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

Mechanistic understanding of immunoglobulin G (IgG) binding to protein A is crucial for the design and development of high-performance protein A chromatography. In this work, the IgG binding domain (Z) of protein A from Staphylococcus aureus was genetically modified by introducing a cysteine residue at the N-terminus (Cys-Z) or a cysteine-lysine dipeptide at the C-terminus (Z-Cys), and the two ligands were used to unravel the IgG binding mechanism by means of binding kinetics and different single molecule measurements. Surface plasma resonance (SPR) measurement of the binding kinetics of mouse myeloma IgG2a (mIgG2a) to the two ligands indicated that oriented ligand immobilization significantly increased the association rate constant of mIgG2a, and Z-Cys had the highest binding affinity to mIgG2a among the three ligands (Cys-Z, Z-Cys and Z). This was attributed to the synergistic contribution of the high association rate constant and low dissociation rate constant to mIgG2a. Furthermore, quartz crystal microbalance with energy dissipation monitoring (QCM-D) measurement provided the maximum adsorption densities of IgGs on the Z-Cys-immobilized chip as zeta potentials of IgGs were nearly zero. The QCM-D investigation revealed that the adsorbed layer was dependent on ligand type and density, and IgG. Moreover, Z-Cys and Cys-Z induced IgG binding in flipped orientations, as evidenced by the antigen-antibody reaction. Finally, rectangular DNA origami tiles were introduced to analyze the molecular orientation of adsorbed IgG. Single-molecule imaging showed that mIgG2a was associated with flexible Z-Cys on the tiles predominantly in side-on and end-on orientations. The research has provided molecular insight into the binding mechanism of IgG molecules at liquid-solid interfaces and would help design new protein A-based ligands and high-capacity adsorbents., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Glycation of proteins results in structural alteration, functional deprivation, and generation of advanced glycation end products (AGEs). Reactive oxygen species (ROS) that are generated during in vivo autoxidation of glucose induces glycoxidation of intermediate glycation-adducts, which in turn give rise to aldehyde and/or ketone groups containing dicarbonyls or reactive carbonyl species (RCS). RCS further reacts non-enzymatically and starts the glycation-oxidation vicious cycle, thus exacerbating oxidative, carbonyl, and glycative stress in the physiological system. Glyoxal (GO), a reactive dicarbonyl that generates during glycoxidation and lipid peroxidation, contributes to glycation. This in vitro physicochemical characterization study focuses on GO-induced glycoxidative damage suffered by immunoglobulin G (IgG) and fibrinogen proteins. The structural alterations were analyzed by UV-vis, fluorescence, circular dichroism, and Fourier transform infrared (FT-IR) spectroscopy. Ketoamines, protein carbonyls, hydroxymethylfurfural (HMF), free lysine, free arginine, carboxymethyllysine (CML), and protein aggregation were also quantified. Structural perturbations, increased concentration of ketoamines, protein carbonyls, HMF, and malondialdehyde (MDA) were reported in glycated proteins. The experiment results also validate increased oxidative stress and AGEs formation i.e. IgG-AGEs and Fib-AGEs. Thus, we can conclude that AGEs formation during GO-mediated glycation of IgG and fibrinogen could hamper normal physiology and might play a significant role in the pathogenesis of diabetes-associated secondary complications., (Copyright © 2022. Published by Elsevier B.V.)

The combination of mixed-mode chromatography (MMC) and molecular imprinting technology (MIT) has been proven to be successful for protein separation, but suffered from cumbersome material preparation and limited performance. In this work, a new modification method marrying atom transfer radical polymerization (ATRP) and multicomponent reaction was proposed to simplify the preparation process. Using regenerated cellulose (RC) membrane as the substrate, immunoglobulin G (IgG) as the template protein and tryptamine as the ligand, a dual-recognition membrane adsorbers (MIM) was prepared by mild Ugi four-component reaction (Ugi-4CR) and surface initiated ATRP. Control the ATRP time is the key for surface imprinting. The static IgG uptake and selectivity of UGI membrane were 45 mg/mL and 1.8, respectively, while those of MIM-0.5 were 42.5 mg/mL and 14, indicating that the introduction of molecular imprinting technology significantly improved the selectivity of the membrane to IgG. The MIM-0.5 membrane retains the pH-dependent and salt-tolerant of HCIC. The dynamic flow-through results showed that the MIM-0.5 membrane could effectively separate IgG from IgG/BSA mixed solution with the purity of 88% and retained its bioactivity. This work demonstrated the feasibility of bonding HCIC and MIT to the membrane surface by Ugi-4CR and ATRP., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Opalescence is a problem concerned with the stability of an antibody solution. It occurs when a high concentration of a protein is present. Arginine (Arg) is a versatile aggregation suppressor of proteins, which is among the candidates that suppress opalescence in antibody solutions. Here, we investigated the effect of various types of small molecular additives on opalescence to reveal the mechanism of Arg in preventing opalescence in antibody solution. As expected, Arg suppressed the opalescence of the immunoglobulin G (IgG) solution. Arg also concentration dependently inhibited the formation of microstructures in IgG molecules. Interestingly, the intrinsic fluorescence spectra of highly concentrated IgG solutions differed from those having low concentrations, even though IgG retained a distinct tertiary structure. Arginine ethylester was more effective in suppressing the opalescence of IgG solutions than Arg, whereas lysine and γ-guanidinobutyric acid were less effective. These results indicated that positively charged groups of both α-amine and guanidinium actively influence Arg as an additive for suppressing opalescence. Diols, which are the suppressors of the liquid-liquid phase separation of proteins were also effective in suppressing the opalescence. These results therefore provide insight into the control of opalescence of antibody solutions at high concentrations using solution additives., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

After several decades of advancements in drug discovery, product development of biopharmaceuticals remains a time- and resource-consuming endeavor. One of the main reasons is associated to the lack of fundamental understanding of conformational dynamics of such biologic entities, and how they respond to various stresses encountered during manufacturing, storage, and shipping. In this work, we have studied the conformational dynamics of human IgG 1 κ b12 monoclonal antibody (mAb) using molecular dynamics simulations. The hundreds of nanoseconds long trajectories reveal that b12 mAb is highly flexible. Its variable domains show greater conformational fluctuations than the constant domains. Additionally, it collapses towards a more globular shape in response to thermal stress, leading to decrease in the total solvent exposed surface area and radius of gyration. This behavior is more pronounced for the deglycosylated b12 mAb, and it appears to correlate with increase in inter-domain contacts between specific regions of the antibody. Conformational fluctuations also cause transient formation and disruption of hydrophobic and charged patches on the antibody surface, which is particularly important for the prediction of CMC properties during development phases of antibody-based biotherapeutics. The insights gained through these simulations may help the development of biologic drugs., Competing Interests: Declaration of Competing Interest The authors confirm that there are no known conflicts of interest associated with this publication., (Copyright © 2021 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

We recently demonstrated that capturing human monoclonal antibodies (hmAbs) using high affinity anti-human Fc (AHC) antibodies allows reliable characterization of antibody-antigen interactions. Here, we characterized six human Fc specific mouse monoclonal antibodies (mAbs) and compared their binding profiles with three previously characterized goat AHC polyclonal antibodies (pAbs), exhibiting properties of a good capture reagent. All six mouse AHC mAbs specifically bound with high affinity to the Fc region of hIgG1, hIgG2, hIgG4 and to 43 different hIgG variants, containing substitutions and/or mutations in the hinge and/or Fc region, that have been reported to exhibit modified antibody effector function and/or pharmacokinetics. Biacore sensor surfaces individually derivatized with mouse AHC mAbs exhibited >2.5-fold higher hIgG binding capacity compared to the three goat AHC pAb surfaces and reproducibly captured hIgG over 300 capture-regeneration cycles. The results of the capture kinetic analyses performed on 31 antibody-antigen interactions using surfaces derivatized with either of the two highest affinity AHC mAbs (REGN7942 or REGN7943) were in concordance with those performed using goat AHC pAb surfaces. Our data demonstrate that AHC mAbs such as REGN7942 and REGN7943 that have properties superior than the three goat AHC pAbs are highly valuable research reagents, especially to perform capture kinetic analyses of antibody-antigen interactions on optical biosensors., (Copyright © 2021 Regeneron Pharmaceuticals. Published by Elsevier Inc. All rights reserved.)

Previous reports present different models for the stabilization of the Fc-FcγRI immune complex. Although accord exists on the importance of L235 in IgG1 and some hydrophobic contacts for complex stabilization, discord exists regarding the existence of stabilizing glycoprotein contacts between glycans of IgG1 and a conserved FG-loop ( 171 MGKHRY 176 ) of FcγRIa. Complexes formed from the FcγRIa receptor and IgG1s containing biantennary glycans with N-acetylglucosamine, galactose, and α2,6-N-acetylneuraminic terminations were measured by hydrogen-deuterium exchange mass spectrometry (HDX-MS), classified for dissimilarity with Welch's ANOVA and Games-Howell post hoc procedures, and modeled with molecular dynamics (MD) simulations. For each glycoform of the IgG1-FcγRIa complex peptic peptides of Fab, Fc and FcγRIa report distinct H/D exchange rates. MD simulations corroborate the differences in the peptide deuterium content through calculation of the percent of time that transient glycan-peptide bonds exist. These results indicate that stability of IgG1-FcγRIa complexes correlate with the presence of intermolecular glycoprotein interactions between the IgG1 glycans and the 173 KHR 175 motif within the FG-loop of FcγRIa. The results also indicate that intramolecular glycan-protein bonds stabilize the Fc region in isolated and complexed IgG1. Moreover, HDX-MS data evince that the Fab domain has glycan-protein binding contacts within the IgG1-FcγRI complex., Competing Interests: Declaration of interests The authors declare that they have no competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Published by Elsevier Ltd.)

Considering the importance of glycopeptides in the clinical diagnosis of cancer and some serious diseases, the identification of glycopeptides from complex biological samples has attracted considerable attention. Effective pre-enrichment before mass spectrometry analysis plays an important role. In this work, a kind of hydrophilic two-dimensional composites (denoted as GO@MPDA@Arg) based on mesoporous polydopamine-graphene oxide were used to selectively enrich glycopeptides in biological samples. The mesoporous polydopamine (MPDA) layer self-assembled with template Pluronic F127 provided more binding sites to load arginine, and bound arginine enhanced the hydrophilicity of the material. As a result, GO@MPDA@Arg composites exhibited excellent enrichment performance for glycopeptides, containing good selectivity (IgG digests : BSA digests = 1:50, molar ratio), low detection limit for IgG digests (10 fmol μL -1 ), high loading capacity for IgG digests (200 μg mg -1 ), and good size exclusion (IgG digests : IgG : BSA = 1:100:100, mass ratio). In addition, mouse brain tissue was selected as the actual biological sample to further study the enrichment effect of GO@MPDA@Arg composites. In three parallel experiments, a total of 401 glycopeptides belonging to 233 glycoproteins were enriched from 200 μg digestion of mouse brain extract. The enrichment results demonstrate that GO@MPDA@Arg composites have application potential for glycopeptides enrichment in protein post-translational modification research., (Copyright © 2021 Elsevier B.V. All rights reserved.)

A detrimental role of the receptor for the advanced glycation end product (RAGE) has been identified in the immune response, and various pathological conditions and its V and C1 domains in the extracellular region of RAGE are believed to be the main ligand-binding domains. Consequently, specific inhibitors targeting those domains could be of clinical value in fighting against the pathological condition associated with RAGE over-activation. Single-domain antibodies, also called nanobodies (Nbs), are antibody fragments engineered from the heavy-chain only antibodies found in camelids, which offer a range of advantages in therapy. In this study, we report the development and characterization of the V-C1 domain-specific Nbs. Three Nbs (3CNB, 4BNB, and 5ENB) targeting V-C1 domain of human RAGE were isolated from an immunized alpaca using a phage display. All of these Nbs revealed high thermostability. 3CNB, 4BNB, and 5ENB bind to V-C1 domain with a dissociation constant (K D ) of 27.25, 39.37, and 47.85 nM, respectively, using Isothermal Titration Calorimetry (ITC). After homodimerization using human IgG1-Fc fusion, their binding affinity improved to 0.55, 0.62, and 0.41 nM, respectively, using Surface Plasmon Resonance (SPR). Flow cytometry showed all the Fc fusions Nbs can bind to human RAGE expressed on the cell surface. Competitive ELISA further confirmed their V-C1-hS100B blocking ability in solution, providing insights into the applicability of Nbs in treating RAGE-associated diseases., Competing Interests: Declaration of competing interest TJ and A. M. applied for a patent on RAGE nanobodies sequences. Authors do not have other conflicts of interest to claim., (Copyright © 2021 Elsevier Inc. All rights reserved.)

The purpose of this investigation was to highlight the utility of nuclear magnetic resonance (NMR) as a multi-attribute method for the characterization of therapeutic antibodies. In this case study, we compared results from isothermal chemical denaturation (ICD) and NMR with standard methods to relate conformational states of a model monoclonal antibody (mAb1) with protein-protein interactions (PPI) that lead to self - association in concentrated solutions. The increase in aggregation rate and relative viscosity for mAb1 was found to be both concentration and pH dependent. The free energy of unfolding (∆G⁰) from ICD and thermal analysis in dilute solutions indicated that although the native state predominated between pH 4 - pH 7, it was disrupted at the CH 2 and unfolded noncooperatively under acidic conditions. One-dimensional (1D) 1 H NMR and two-dimensional (2D) 13 C- 1 H NMR performed, in concentrated solutions, confirmed that PPI between pH 4-7 occurred while mAb1 was in the native state. NMR corroborated that mAb1 maintained a dominant native state at formulation-relevant conditions at the tested pH range, had increased global molecular tumbling dynamics at lower pH and confirmed increased PPI at higher pH conditions. This report aligns and compares typical characterization of an IgG1 with assessment of structure by NMR and provided a more precise assessment and deeper insight into the conformation of an IgG1 in concentrated solutions., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper The authors declare the following financial interests/personal relationships which may be considered as potential competing interests, (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

Using LAURDAN fluorescence we observed that water dynamics measured at the interface of DOPC bilayers can be differentially regulated by the presence of crowded suspensions of different proteins (HSA, IgG, Gelatin) and PEG, under conditions where the polymers are not in direct molecular contact with the lipid interface. Specifically, we found that the decrease in water dipolar relaxation at the membrane interface correlates with an increased fraction of randomly oriented (or random coil) configurations in the polymers, as Gelatin > PEG > IgG > HSA. By using the same experimental strategy, we also demonstrated that structural transitions from globular to extended conformations in proteins can induce transitions between lamellar and non-lamellar phases in mixtures of DOPC and monoolein. Independent experiments using Raman spectroscopy showed that aqueous suspensions of polymers exhibiting high proportions of randomly oriented conformations display increased fractions of tetracoordinated water, a configuration that is dominant in ice. This indicates a greater capacity of this type of structure for polarizing water and consequently reducing its chemical activity. This effect is in line with one of the tenets of the Association Induction Hypothesis, which predicts a long-range dynamic structuring of water molecules via their interactions with proteins (or other polymers) showing extended conformations. Overall, our results suggest a crucial role of water in promoting couplings between structural changes in macromolecules and supramolecular arrangements of lipids. This mechanism may be of relevance to cell structure/function when the crowded nature of the intracellular milieu is considered., (Copyright © 2021 Elsevier B.V. All rights reserved.)

HS002 is the recombinant human tumor necrosis factor-α receptor Ⅱ: IgG Fc fusion protein licensed in China to treat rheumatism and psoriasis. The aim of this study was to isolate and characterize the hydrophobic freeze-dried powder injection (HS002) and ampoule injection (HS002A) variants derived from proteins of the same sequence and then to explore the structure-function relationship. Extensive physicochemical and structural testing was performed during a side-by-side comparison of the monomer peak and variant. Then the TNF-α-related binding activity, cell biological activity and affinity with FcRn were analyzed. Finally, a transformation study of the hydrophobic variant was performed under serum-like redox conditions. This research revealed that HS002A has similar physicochemical and structure-function relationship profiles to those of HS002. The hydrophobic variant exhibited the presence of new incorrect disulfide bridging. At the same time, this novel disulfide scrambled species structure-function relationship was found to be the molecular basis for reduced TNF-α binding and cell biological activities. In addition, incorrect disulfide bridging was found to be reversible under serum-like redox conditions, restoring TNF-α binding and cell biological activities to almost normal levels, all of which indicate that the variant is probably irrelevant to clinical efficacy once the drug enters the bloodstream., (Copyright © 2021. Published by Elsevier B.V.)

The performance of biophysical methods used for the characterization of protein higher order structure (HOS) is key to ensure reliable structural data for drug applications, as these methods are not routinely validated. To assess the analytical performance characteristics, the impact of increasing amounts of heat-denatured material (HDM) on HOS data obtained for a monoclonal antibody (mAb) and its cysteine-conjugated antibody-drug conjugate (ADC) by a set of biophysical methods routinely used in the pharmaceutical industry was evaluated. Relationships between structural data generated by these methods were established using statistical correlation analysis. Most individual methods revealed a linear correlation with increasing amounts of HDM, in the presence of intact mAb or ADC. Overall, Pearson correlation analysis showed strong correlations between the biophysical data obtained. Moreover, biophysical methods that are generally claimed to be orthogonal, were confirmed to provide similar structural insights based on the data obtained. Some methods were capable of differentiating the impact of structural change and/or onset of protein aggregation between the mAb and the ADC. Our results underline the capabilities and performance of the biophysical characterization methods investigated, thereby substantiating these are 'scientifically sound' and 'fit for purpose': the interrogation of protein HOS as part of pharmaceutical development., (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

A protein precipitation technique was optimized to produce biophysically stable 'protein microbeads', applicable to highly concentrated protein formulation. Initially, production of BSA microbeads was performed using rapid dehydration by vortexing in organic solvents followed by cold ethanol treatment and a vacuum drying. Out of four solvents, n-octanol produced the most reversible microbeads upon reconstitution. A Shirasu porous glass (SPG) membrane emulsification technique was utilized to enhance the size distribution and manufacturing process of the protein microbeads with a marketized human IgG solution. Process variants such as dehydration time, temperature, excipients, drying conditions, and initial protein concentration were evaluated in terms of the quality of IgG microbeads and their reversibility. The hydrophobized SPG membrane produced a narrow size distribution of the microbeads, which were further enhanced by shorter dehydration time, low temperature, minimized the residual solvents, lower initial protein concentration, and addition of trehalose to the IgG solution. Final reversibility of the IgG microbeads with trehalose was over 99% at both low and high protein concentrations. Moreover, the formulation was highly stable under repeated mechanical shocks and at an elevated temperature compared to its liquid state. Its in vivo pharmacokinetic profiles in rats were consistent before and after the 'microbeadification'., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Therapeutic antibodies have many biopharmaceutical applications; however, characterization of their higher-order structures is a major concern in quality control. We have developed AF.2A1, an artificial protein, that specifically recognizes non-native, structured IgGs. We performed binding assays using various types of IgGs and fragments to investigate the mechanisms by which AF.2A1 interacts with the non-native IgG. AF.2A1 recognized the acid-stressed IgGs from human, mouse, and rat, but not rabbit. Binding assays using the human IgG1 fragments revealed that an interface emerged by deleting five C-terminal residues. We conclude that AF.2A1 recognizes an exposed hydrophobic core centered on the Trp417. Our results concur with those of the previous studies showing that C-terminal structural changes occur early during antibody denaturation and aggregation. Our findings explain the molecular rationale for using AF.2A1 in quality control of biopharmaceutical IgGs., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Recombinant antibodies (Abs) against the SARS-CoV-2 virus hold promise for treatment of COVID-19 and high sensitivity and specific diagnostic assays. Here, we report engineering principles and realization of a Protein-fragment Complementation Assay (PCA) detector of SARS-CoV-2 antigen by coupling two Abs to complementary N- and C-terminal fragments of the reporter enzyme Gaussia luciferase (Gluc). Both Abs display comparably high affinities for distinct epitopes of viral Spike (S)-protein trimers. Gluc activity is reconstituted when the Abs are simultaneously bound to S-protein bringing the Ab-fused N- and C-terminal fragments close enough together (8 nm) to fold. We thus achieve high specificity both by requirement of simultaneous binding of the two Abs to the S-protein and also, in a steric configuration in which the two Gluc complementary fragments can fold and thus reconstitute catalytic activity. Gluc activity can also be reconstituted with virus-like particles that express surface S-protein with detectable signal over background within 5 min of incubation. Design principles presented here can be readily applied to develop reporters to virtually any protein with sufficient available structural details. Thus, our results present a general framework to develop reporter assays for COVID-19, and the strategy can be readily deployed in response to existing and future pathogenic threats and other diseases., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The CH 2 domain is a critical element of the human Immunoglobulin G (IgG) constant region. Although the CH 2 domain is the least stable domain in IgG, it is also a promising scaffold candidate for developing novel therapeutic approaches. Recently, we succeeded in preparing glycosylated and non-glycosylated CH 2 domain in the host organism Pichia pastoris. Herein, we verified that glycosylation of the CH 2 domain decreased both, its tendency to aggregate and its immunogenicity in mice, suggesting that aggregation and immunogenicity are related. In addition, we have produced in P. pastoris a stabilized version of the CH 2 domain with and without glycan, and their propensity to aggregate evaluated. We found that stabilization alone significantly decreased the aggregation of the CH 2 domain. Moreover, the combination of glycosylation and stabilization completely suppressed its aggregation behavior. Since protein aggregation is related to immunogenicity, the combination of glycosylation and stabilization to eliminate the aggregation behavior of a protein could be a fruitful strategy to generate promising immunoglobulin scaffolds., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Inc. All rights reserved.)