Search

River scour and siltation, inherently prolonged and multifaceted phenomena, profoundly impact the hydraulic conductivity and navigational safety of waterways, thereby rendering the precise forecasting of their fluctuations a paramount and unresolved challenge. This study embarks on a novel investigative trajectory by examining energy dissipation in rivers, specifically through the scrutiny of empirical hydrological records. Employing the principles of energy balance theory, this study elucidates the intricate connection between energy losses and sedimentation volumes in the upper reaches of the Yangtze River and at its confluence with the significant tributary, the Jialing River.Our findings diverge from conventional wisdom, revealing that standard metrics of energy loss, encompassing kinetic, potential, and total mechanical energies, along with momentum losses, inadequately characterize the complexity of sediment deposition processes. In contrast, we demonstrate that the loss of suspension power is a more indicative measure of sedimentation quantity. Through meticulous comparisons of various formulations for calculating suspension power, we identified a formula grounded in the concept of minimal available power dissipation in river systems that exhibits superior accuracy in correlating suspension power losses with sedimentation patterns in river sections. This formula's efficacy is further enhanced when considering aggregate suspension power dissipation under the influence of tributary inflows, enabling refined predictions of sedimentation variations along river segments. In conclusion, the insights derived from this meticulous research contribute significantly to the realm of river resource management and the pursuit of sustainable, high-quality aquatic ecosystem development.

About a quarter of the world's population suffers from insomnia, and the number of the insomniacs is gradually increasing. However, the current drug therapy and non-drug therapy sleep-aid methods have certain limitations. In general, the sleep-aid effect of drug therapy is better than that of Non-drug therapy, but western medicine may lead to some side effects and drug abuse. Although the side effects of Chinese Herbal Medicine (CHM) are relatively small, making the herbal decoction is complex and time-consuming. Therefore, exploring a novel sleep-aid method is very significant. In this paper, a flexible and dissolving Traditional Chinese Medicine (TCM) microneedle patch is proposed for sleep-aid intervention. The TCM microneedle patch is a micrometer-scale intrusive object, and the herbal extracts are carried by the patch. The materials, design method, and fabrication process of the microneedle patch have been described in detail. Besides, the mechanical characteristics of the microneedle patch, sleep-aid effect evaluation method, and experimental scheme have been presented. Three microneedle tips with radii of 5 μm, 15 μm, and 22 μm are selected for simulation analysis. Abaqus simulation results indicate that the smaller the radius of the microneedle tip, the smaller the piercing force. Considering that the microneedle should easily penetrate the skin without buckling, that is, the piercing force should be larger than the buckling force, thus 15 μm, instead of 5 μm or 22 μm, is more suitable to be adopted as the radius of the microneedle tip. For the microneedle with the radius of 15 μm, the piercing force is 0.033 N, and the difference between the piercing force and buckling force is 0.036 N. Experimental results demonstrate that the fracture force of the microneedle is about 0.29 N, which is far larger than the piercing force and buckling force. The single-lead EEG signals of the frontal lobe are used to evaluate the sleep-aid effect of the TCM microneedle patch. After sleep-aid intervention on the Anmian and Yintang acupoints using the patches, for most subjects, the ratios of the low-frequency brain wave energies to the high-frequency brain wave energies are increased obviously, indicating that the proposed sleep-aid method is effective.

People spend approximately one-third of their lives in sleep, but more and more people are suffering from sleep disorders. Sleep posture is closely related to sleep quality, so related detection is very significant. In our previous work, a smart flexible sleep monitoring belt with MEMS triaxial accelerometer and pressure sensor has been developed to detect the vital signs, snore events and sleep stages. However, the method for sleep posture detection has not been studied. Therefore, to achieve high performance, low cost and comfortable experience, this paper proposes a smart detection method for sleep posture based on a flexible sleep monitoring belt and vital sign signals measured by a MEMS Inertial Measurement Unit (IMU). Statistical analysis and wavelet packet transform are applied for the feature extraction of the vital sign signals. Then the algorithm of recursive feature elimination with cross-validation is introduced to further extract the key features. Besides, machine learning models with 10-fold cross validation process, such as decision tree, random forest, support vector machine, extreme gradient boosting and adaptive boosting, were adopted to recognize the sleep posture. 15 subjects were recruited to participate the experiment. Experimental results demonstrate that the detection accuracy of the random forest algorithm is the highest among the five machine learning models, which reaches 96.02 %. Therefore, the proposed sleep posture detection method based on the flexible sleep monitoring belt is feasible and effective.

The reliability of MEMS inertial devices applied in complex environments involves interdisciplinary fields, such as structural mechanics, material mechanics and multi-physics field coupling. Nowadays, MEMS inertial devices are widely used in the fields of automotive industry, consumer electronics, aerospace and missile guidance, and a variety of reliability issues induced by complex environments arise subsequently. Hence, reliability analysis and design of MEMS inertial devices are becoming increasingly significant. Since the reliability issues of MEMS inertial devices are mainly caused by complex mechanical and thermal environments with intricate failure mechanisms, there are fewer reviews of related research in this field. Therefore, this paper provides an extensive review of the research on the reliability of typical failure modes and mechanisms in MEMS inertial devices under high temperature, temperature cycling, vibration, shock, and multi-physical field coupling environments in the last five to six years. It is found that though multiple studies exist examining the reliability of MEMS inertial devices under single stress, there is a dearth of research conducted under composite stress and a lack of systematic investigation. Through analyzing and summarizing the current research progress in reliability design, it is concluded that multi-physical field coupling simulation, theoretical modeling, composite stress experiments, and special test standards are important directions for future reliability research on MEMS inertial devices.

Objective: Neck pain has emerged as a significant public health concern. This study is to unveil the present state of neck pain research, thereby furnishing invaluable insights for prospective research endeavours and clinical applications. Methods: The study was initiated by searching the Web of Science Core Collection database, focusing on ''neck pain''. From the amassed results, the top 100 most cited references were imported into CiteSpace and VOSviewer, enabling a rigorous bibliometric analysis. To ensure precision, synonymous terms conveying similar meanings were harmonized. The bibliometric study encompassed countries, research institutions, authors, journals, and keyword analysis. Results: The investigation centered on a curated compilation of 100 articles, disseminated across a diverse array of 36 scholarly journals. These seminal articles originated from 24 distinct countries, reflecting contributions from a wide spectrum of 188 research institutions. Impressively, a collaborative effort involving 385 authors emerged. Noteworthy core research countries included the United States and Australia, with the University of Queensland and the University of Toronto asserting notable influence. Prolific authors such as J. David Cassidy and Pierre Cote garnered attention. Present research endeavours pivot around the incidence of neck pain, the identification of risk factors, the efficacy evaluation of treatment modalities, and a pronounced focus on high-quality randomized controlled trials and systematic reviews. Conclusion: The study shines a light on key research countries, influential institutions, prominent authors, and prevalent trends, effectively contributing to comprehending the knowledge landscape and research dynamics in the field of neck pain.

Bread and soup are two of the most important foods in daily life, thus dough fermentation and nutrient soup elaboration are more and more popular, but there is a lack of relevant low-cost and high-reliable household appliances on the market. Therefore, this paper proposes automatic control methods for dough fermentation and nutrient soup elaboration based on a special microwave oven. Fermentation theory, run-up microwave fermentation principle, microwave extraction principle, NTC temperature probe design and scalable fuzzy control algorithm are described in detail. Besides, the experimental platform is set up with a temperature chamber, an optical fiber thermometer and a power meter. Experimental results demonstrate that the relationship between the heating time and flour's mass is linear. For different ambient temperature tests, the volume ratios of the fermented dough to unfermented dough of different cases range from 2.2 to 2.62, and the inside of the dough after fermentation is fluffy, with small and dense cavities. Meanwhile, there is no acid taste and skin dryness, and the power consumption of microwave fermentation is less than half of that induced by grill, convection or steam fermentation. The detection error of the NTC temperature probe with microwave shielded is 0.48 °C, and the control error of the closed loop system is less than 0.5 °C. The temperature-rise slope of water is lower than that of ingredient, and the water's temperature is about 1 °C less than that of the ingredient. The soup after microwave elaboration is amber and clear, the ingredients are intact, the water loss is less than 50 g, and the total power consumption is 684 Wh. In short, microwave-based control methods for dough fermentation and nutrient soup elaboration are effective.

Heated tobacco products (HTPs) are a novel type of cigarette that have received extensive attention. The tobacco plug could be made from tobacco granules (TGs), which are heated but not burned during the inhalation process. Thermal conductivity is an important property to evaluate the speed of heating TGs to meet the critical temperature for generating aerosol. Nevertheless, thermal physics properties of TGs is rarely reported. In this study, the thermophysical performance for the tobacco granules is systematically studied. An effective strategy of raising the thermal conductivity of TGs by introducing a small amount of nanoparticles of high-thermal-conductivity-materials (HTCMs, copper, silver, and graphene) is proposed, which not only results in a 35% improvement in the thermal conductivity but also reduces the maximum temperature for generating aerosol. In addition, introducing Cu and Ag particles in the TGs are favorable for improving the antibacterial effect. This method is worth promoting for enhancing the thermal conductivity of other plant-derived heated products.

The pre-swirl system has the ability to decrease the air supply temperature so as to improve the cooling performance and the operating life for turbine rotating blade. In this paper, a test rig was designed to reveal the aero-thermal characteristics in a cover-plate type pre-swirl system of gas turbine engines. Then, the theoretical derivation and experimental evaluation were conducted to reveal the variation of temperature drop and power consumption of a pre-swirl system with the mass flow rate ratio and rotating speed. Especially, the pressure and temperature on the rotating turbine disc were measured by a co-rotating data recorder. The theoretical and experimental analyses indicate that the temperature drop of pre-swirl system increases as the velocity coefficient of the pre-swirl nozzle outlet enhanced, but presenting a decrease with the increment of the rotating Mach number. Then, the ideal dimensionless temperature drop can be formally unified with the actual dimensionless temperature by defining the tangential velocity recovering coefficient, which is verified with the experimental results. Moreover, a linear relationship between the dimensionless temperature drop and the effective swirl ratio at the nozzle outlet can be deduced further. Especially, this relationship shows a good agreement between the predicted values and numerical results. Since the dimensionless temperature drop decreases with the increase of the dimensionless power consumption; an important discovery can be concluded that the algebraic sum of these two physical quantities is always equal to 1. Therefore, the results can offer a reference for the design and optimization of gas turbine cover-plate type pre-swirl system.

Bacteria are the predominant source for producing recombinant proteins but while many exogenous proteins are expressed, only a fraction of those are soluble. We have found that a new actin regulatory enzyme Mical is poorly soluble when expressed in bacteria but the use of a Nus fusion protein tag greatly increases its solubility. However, available vectors containing a Nus tag have been engineered in a way that hinders the separation of target proteins from the Nus tag during protein purification. We have now used recombinant DNA approaches to overcome these issues and reengineer a Nus solubility tag-containing bacterial expression vector. The data herein present a modified bacterial expression vector useful for expressing proteins fused to the Nus solubility tag and separating such target proteins from the Nus tag during protein purification. Keywords: Mical, Plexin, Semaphorin, Repulsion, Axon guidance, Redox

Human enterovirus 71 (EV71) is the main causative pathogen of hand, foot, and mouth disease (HFMD) in children. The epidemic of HFMD has been a public health problem in Asia-Pacific region for decades, and no vaccine and effective antiviral medicine are available. Curcumin has been used as a traditional medicine for centuries to treat a diversity of disorders including viral infections. In this study, we demonstrated that curcumin showed potent antiviral effect again EV71. In Vero cells infected with EV71, the addition of curcumin significantly suppressed the synthesis of viral RNA, the expression of viral protein, and the overall production of viral progeny. Similar with the previous reports, curcumin reduced the production of ROS induced by viral infection. However, the antioxidant property of curcumin did not contribute to its antiviral activity, since N-acetyl-l-cysteine, the potent antioxidant failed to suppress viral replication. This study also showed that extracellular signal-regulated kinase (ERK) was activated by either viral infection or curcumin treatment, but the activated ERK did not interfere with the antiviral effect of curcumin, indicating ERK is not involved in the antiviral mechanism of curcumin. Unlike the previous reports that curcumin inhibited protein degradation through ubiquitin–proteasome system (UPS), we found that curcumin had no impact on UPS in control cells. However, curcumin did reduce the activity of proteasomes which was increased by viral infection. In addition, the accumulation of the short-lived proteins, p53 and p21, was increased by the treatment of curcumin in EV71-infected cells. We further probed the antiviral mechanism of curcumin by examining the expression of GBF1 and PI4KB, both of which are required for the formation of viral replication complex. We found that curcumin significantly reduced the level of both proteins. Moreover, the decreased expression of either GBF1 or PI4KB by the application of siRNAs was sufficient to suppress viral replication. We also demonstrated that curcumin showed anti-apoptotic activity at the early stage of viral infection. The results of this study provide solid evidence that curcumin has potent anti-EV71 activity. Whether or not the down-regulated GBF1 and PI4KB by curcumin contribute to its antiviral effect needs further studies.

Danshen, also known as Salvia miltiorrhiza, is a medicinal herb used in traditional Chinese medicine. Its potential impact on endometrial cancer has not been thoroughly investigated. This study aimed to examine the effect of dihydroisotanshinone I (DT), a compound found in Danshen, on the viability of ARK1 and ARK2 endometrial cancer cells and its mechanisms. The results showed that 10 μM DT inhibited cell viability of ARK1 and ARK2 cells by inducing apoptosis and ferroptosis, which was achieved by blocking the expression of GPX4. In vivo experiments using a xenograft nude mouse model indicated that DT treatment significantly reduced tumor volume without causing any adverse effects. These findings suggest that DT may be a potential therapeutic agent for inhibiting endometrial cancer cell viability, but further research is needed to confirm these results.

The Chiehyuan herbal oral protection solution (GB-2) is a herbal mixture commonly utilized in Taiwan for combating severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) as per traditional Chinese medicine practices. This study assessed the clinical impact of GB-2 through prospective clinical trials. With twice-daily use for a week, GB-2 was shown to diminish the expression of angiotensin-converting enzyme 2 (ACE2) in oral mucosal cells. Moreover, after two weeks of use, it could reduce transmembrane protease, serine 2 (TMRPSS2) expression in these cells. Additionally, in vitro experiments demonstrated that GB-2 lessened the entry efficiency of the Omicron, L452R–D614G, T478K–D614G, and L452R–T478K–D614G variants of the SARS-CoV-2 pseudotyped lentivirus. It also impeded the interaction between ACE2 and the receptor-binding domain (RBD) presenting N501Y–K417N–E484A–G339D–Q493R–G496S–Q498R and L452R–T478K mutations. Glycyrrhizic acid, a major compound in GB-2, also hindered the entry of the Omicron variant (BA.1) of the SARS-CoV-2 pseudotyped lentivirus by obstructing the binding between ACE2 and the RBD presenting the N501Y–K417N–E484A–G339D–Q493R–G496S–Q498R mutation. To sum up, these findings suggest that GB-2 can decrease ACE2 and TMPRSS2 expression in oral mucosal cells. Both glycyrrhizic acid and GB-2 were found to reduce the entry efficiency of the Omicron variant (BA.1) of the SARS-CoV-2 pseudotyped lentivirus and block the binding between ACE2 and the RBD with the N501Y–K417N–E484A–G339D–Q493R–G496S–Q498R mutation. This evidence implies that GB-2 might be a potential candidate for further study as a preventative measure against SARS-CoV-2 infection.

At the time of writing, more than 440 million confirmed coronavirus disease 2019 (COVID-19) cases and more than 5.97 million COVID-19 deaths worldwide have been reported by the World Health Organization since the start of the outbreak of the pandemic in Wuhan, China. During the COVID-19 pandemic, many variants of SARS-CoV-2 have arisen because of high mutation rates. N501Y, E484K, K417N, K417T, L452R and T478K in the receptor binding domain (RBD) region may increase the infectivity in several variants of SARS-CoV-2. In this study, we discovered that GB-1, developed from Chiehyuan herbal formula which obtained from Tian Shang Sheng Mu of Chiayi Puzi Peitian Temple, can inhibit the binding between ACE2 and RBD with Wuhan type, K417N-E484K-N501Y and L452R-T478K mutation. In addition, GB-1 inhibited the binding between ACE2 and RBD with a single mutation (E484K or N501Y), except the K417N mutation. In the compositions of GB-1, glycyrrhizic acid can inhibit the binding between ACE2 and RBD with Wuhan type, except K417N-E484K-N501Y mutation. Our results suggest that GB-1 could be a potential candidate for the prophylaxis of different variants of SARS-CoV-2 infection because of its inhibition of binding between ACE2 and RBD with different mutations (L452R-T478K, K417N-E484K-N501Y, N501Y or E484K).

Inflammation and proliferation of vascular smooth muscle cells (VSMCs) are the key events in intimal hyperplasia. This study aimed to explore the mechanism by which long non-coding RNA (lncRNA) KCNQ1OT1 affects VSMC inflammation and proliferation in this context. A vein graft (VG) model was established in mice to introduce intimal hyperplasia. Isolated normal VSMCs were induced with platelet-derived growth factor type BB (PDGF-BB), and the cell proliferation, migration, and secretion of inflammatory factors were determined. The results showed that KCNQ1OT1 was downregulated in the VSMCs from mice with intimal hyperplasia and in the PDGF-BB-treated VSMCs, and such downregulation of KCNQ1OT1 resulted from the increased methylation level in the KCNQ1OT1 promoter. Overexpressing KCNQ1OT1 suppressed PDFG-BB-induced VSMC proliferation, migration, and secretion of inflammatory factors. In VSMCs, KCNQ1OT1 bound to the nuclear transcription factor kappa Ba (IκBa) protein and increased the cellular IκBa level by reducing phosphorylation and promoting ubiquitination of the IκBa protein. Meanwhile, KCNQ1OT1 promoted the expression of IκBa by sponging miR-221. The effects of KCNQ1OT1 knockdown on promoting VSMC proliferation, migration, and secretion of inflammatory factors were abolished by IκBa overexpression. The roles of KCNQ1OT1 in reducing the intimal area and inhibiting IκBa expression were proved in the VG mouse model after KCNQ1OT1 overexpression. In conclusion, KCNQ1OT1 attenuated intimal hyperplasia by suppressing the inflammation and proliferation of VSMCs, in which the mechanism upregulated IκBa expression by binding to the IκBa protein and sponging miR-221.

Since the start of the outbreak of coronavirus disease 2019 in Wuhan, China, there have been more than 150 million confirmed cases of the disease reported to the World Health Organization. The beta variant (B.1.351 lineage), the mutation lineages of SARS-CoV-2, had increase transmissibility and resistance to neutralizing antibodies due to multiple mutations in the spike protein. N501Y, K417N and E484K, in the receptor binding domain (RBD) region may induce a conformational change of the spike protein and subsequently increase the infectivity of the beta variant. The L452R mutation in the epsilon variant (the B.1.427/B.1.429 variants) also reduced neutralizing activity of monoclonal antibodies. In this study, we discovered that 300 μg/mL GB-2, from Tian Shang Sheng Mu of Chiayi Puzi Peitian Temple, can inhibit the binding between ACE2 and wild-type (Wuhan type) RBD spike protein. GB-2 can inhibit the binding between ACE2 and RBD with K417N-E484K-N501Y mutation in a dose-dependent manner. GB-2 inhibited the binding between ACE2 and the RBD with a single mutation (K417N or N501Y or L452R) except the E484K mutation. In the compositions of GB-2, glycyrrhiza uralensis Fisch. ex DC., theaflavin and (+)-catechin cannot inhibit the binding between ACE2 and wild-type RBD spike protein. Theaflavin 3-gallate can inhibit the binding between ACE2 and wild-type RBD spike protein. Our results suggest that GB-2 could be a potential candidate for the prophylaxis of some SARS-CoV-2 variants infection in the further clinical study because of its inhibition of binding between ACE2 and RBD with K417N-E484K-N501Y mutations or L452R mutation.

The common cutworm, Spodoptera litura (Lepidoptera: Noctuidae), is a voracious agricultural pest. To increase understanding of the migration patterns and genetic diversity of different geographic populations of this species, we analyzed genetic variation in nine microsatellite loci among 576 individuals collected from 17 locations in China and one in Myanmar during 2011–2012. We successfully identified 162 alleles, with an average of 18 alleles per locus and a range of 5 to 34. The mean observed heterozygosity of the 18 populations ranged from 0.18 to 0.98, and the expected heterozygosity ranged from 0.19 to 0.89. For the nine microsatellite markers studied, polymorphism information content ranged from 0.18 to 0.88 (mean=0.64). We found low genetic differentiation among the 18 populations (mean F-statistics (FST)=0.05) and high genetic diversity among individuals. Principle coordinates analysis indicated no significant correlation between geographic and genetic distance (r=0.04). The value of Nm (Nm>4) estimated using coalescent-based methods suggests strong gene flow with migration. The nine microsatellite markers identified in this study will be beneficial for further investigation of migration patterns and genetic diversity in S. litura.

The data in this article is related to the research article entitled, “Targeting of Multiple Oncogenic Signaling Pathways by Hsp90 Inhibitor Alone or in Combination with Berberine for Treatment of Colorectal Cancer” [1]. Overexpression of survivin induces resistance to various anticancer therapies such as chemotherapy and radiation therapy in colorectal cancer (CRC) cells. To determine significant correlations of biological functions/pathways with survivin, 4567 significant genes were analyzed from the GEO DataSet (GSE21815) of CRC and these were overlaid onto a global molecular network developed from information contained in the Ingenuity Pathway Analysis (IPA) database. The data here present the most significant disease and disordered biological functions, significant molecular/cellular functions and significant categories in physiological development/system functions which were associated with CRC. The top 10 canonical signaling pathways associated with CRC were categorize in order based on the level of statistical significance.

The pink bollworm, Pectinophora gossypiella (Lepidoptera: Gelechiidae) is one of the most serious lepidopteran pests of cotton in the world. This pest invaded China at the onset of the 20th century, possibly through repeated introductions from several different locations worldwide. In this paper, we describe different behavioral parameters of this Hubei P. gossypiella strain under laboratory and field conditions. Using an infra-red video recorder, we observed (nocturnal) emergence, flight and mating activities, and oviposition patterns. Moth emergence started from 13:00 and continued up till 23:00. Under laboratory and field conditions, 2-7-d-old moths initiated flight around sunset, peaked 50 min later and gradually declined until 04:00. Although mating started immediately after darkness (i.e., 20:00), mating behavior was most intense from 23:00 to 03:40. Oviposition also showed distinct time-related patterns, with approx. 70% eggs laid between 20:00 and 22:00. In the studies of the relationship between flight and oviposition, the duration of flight had an effect on oviposition. The 1-d-old moths flown for 6 and 12 h began oviposition earlier than the unflown ones, and the 6-h flight had no effect on the egg production. However, the longevity of the flown moths was shortened after flight. In addition, the peaks of oviposition for the flown moths were advanced 2–3 d. The age when the moths flied affected the oviposition of adult moths. The earlier the moths started to fly after emergence, the greater the fecundity they had. The average egg production of moths flown for 24 h was less than that of non-flown moths which were of the same age. Both flight and delay in mating could advance the oviposition peak. Our study provides detailed insights in nocturnal activities and the reproductive biology of local P. gossypiella populations, which could be employed to fine-tune current pest management programs in China.

Pollen allergy is believed to be less common in East Asia, Latin America, and tropical areas. The purpose of this study was to understand the role of pollen allergy in Taiwan. Methods: Patients with clinically diagnosed allergic rhinitis were enrolled. All subjects received a 30-item skin test panel that included perennial allergens (house dust mix, Dermatophagoides pteronyssinus, Dermatophagoides farinae, dog epithelium, cat hairs, cockroach mix, and Candida albicans) and pollen allergens (acacia, pine mix, eucalyptus, beefwood, juniper mix, willow, mulberry mix, pepper tree, cedar, Johnson grass, Bermuda grass, ragweed mix, Timothy grass, spiny pigweed, cocklebur, sage mix, sheep sorrel, dog fennel, pigweed mix, English plantain, castor bean, alfalfa, and dandelion). Results: A total of 419 patients were recruited. A total of 313 (74.7%) had a positive skin test. A total of 288 patients (68.7%) were sensitive to perennial allergens, and 11 8 patients (28.2%) were sensitive to pollen allergens. However, 93 pollen-sensitive patients were also sensitive to perennial allergens, and only 25 were sensitive to pollen allergens alone. The most common allergens were D. pteronyssinus, D. farinae, house dust mix, and cockroach, but the most common pollen allergens were spiny pigweed, Johnson grass, and sheep sorrel. All nasal symptoms tended to be more severe in patients who were sensitive to perennial allergens than in those who were sensitive to pollen allergens alone. Conclusion: Most patients with allergic rhinitis in Taiwan are sensitive to perennial allergens, and pollens are a less common allergen.

Objective: In the present study, we evaluated and compared the outcomes of transarterial embolization with those of percutaneous contrast-enhanced ultrasound-guided transabdominal sac embolization (PUSE) for type II endoleaks (T2ELs)., Methods: A retrospective review was conducted of consecutive patients who had undergone T2EL embolization between January 2015 and December 2020 at our center. The cohort was divided into two groups according to the embolization approach: PUSE vs transarterial. Freedom from aneurysm growth, safety, immediate technical success, freedom from persistent T2ELs, and the repeat embolization rate were assessed., Results: A total of 25 patients and 28 embolization procedures (PUSE, n = 16; transarterial embolization, n = 12) were examined. Both the fluoroscopic time (13.3 ± 3.2 minutes vs 35.0 ± 7.0 minutes; P < .001) and the procedural time (84.9 ± 8.4 minutes vs 117.1 ± 14.8 minutes; P < .001) were significantly shorter in the PUSE group than in the transarterial group. After the embolization procedure, the patients were followed up for a mean duration of 24.7 ± 14.9 months for the PUSE group and 35.9 ± 21.1 months for the transarterial group (P = .1323). Five patients in the transarterial group had undergone unsuccessful embolization, with success in 7 of the 12 patients in the transarterial group and all 16 patients in the PUSE group (P = .0081). Failure had resulted from failed transarterial access or a recurrent T2EL. Three of the five patients had undergone subsequent PUSE during follow-up. No patient in the PUSE group had experienced sac expansion compared with four patients in the transarterial group (P = .0242). Similarly, no patient in the PUSE group had developed a newly discovered T2EL vs four patients in the transarterial group (P = .0242). Thus, the outcomes were markedly better for the PUSE group than were those for the transarterial group. A major procedure-related complication (abdominal abscess) occurred in one patient in the transarterial group., Conclusions: PUSE is safe and effective for managing T2ELs. It yields better outcomes in terms of preventing aneurysm growth, decreasing the incidence of repeat embolization and complications, minimizing the recurrence of T2ELs, and reducing the fluoroscopic and procedural times. We, thus, regard it as the preferred approach for the management of T2ELs., (Copyright © 2021 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.)

This paper presents a simple and cost-effective UV-ablation technique for fabrication of size-tunable nanofluidics devices via photochemical decomposition reaction. UV-irradiation through a PET photomask results in continuous decomposition of poly(carbonate) (PC), forming nanochannel and carboxyl groups on the surface of the etched PC. This photochemical decomposition process occurs at molecular scale, therefore, the depth of nanochannels can be controlled at nanometer level. The etching rate is estimated to be ca. 0.015 nms(-1). To demonstrate the potential application of the present UV-ablation technique, a nanochannel was fabricated and integrated with microchannels to form a micro/nanofluidics chip for protein concentration. Using this device, about 10(3)-10(5) fold protein concentration can be achieved within 10 min. The present approach offers a simple and practical solution to fabricate nanofluidics devices at low-cost, and the resulting device could provide ideal platforms for μTAS towards various applications in biology and chemistry., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Thermal bonding is an important technique to fabricate polymer electrophoresis microchip. However, the metal electrodes deposited on polymer substrate can readily fracture during the thermal bonding. In this paper, poly(ethylene terephthalate) (PET) was exploited to fabricate the electrophoresis microchip with an integrated gold electrode for amperometric detection. The fracture of the gold electrode was studied through FEA (finite element analysis) simulations, the potentially risk positions on the electrode were shown. The calculation results were tested by bonding experiments and were proven to be consistent with the experiments. Besides, an optimal bonding temperature for PET chip was also presented based on FEA simulations and bonding experiments. Considering the low surface properties of PET, oxygen plasma-assisted thermal bonding technique was used to enhance bonding. Upon treated for 150 s, the PET substrates could be thermally bonded at 62 degrees C without electrode fracture. The fabricated PET chips were demonstrated for detection of standard glucose solution. Satisfactory reproducibility was achieved, and the RSD values of peak height and migration time of the PET CE chips were 0.51% and 2.17%, respectively.

A robust and simple approach for microfabricated chip based liquid-liquid extraction was developed for on-chip sample pretreatment. The chip based extraction system was composed of two microfabricated glass plates with a microporous membrane sandwiched in between. A simple bonding approach using epoxy was used to achieve bonding and sealing of the L-L extraction chip. Gravity was employed to drive the aqueous and organic flows through separate channels in the extraction system, separated by the membrane. During extraction, the analyte in an aqueous sample stream was transferred through the membrane into the organic stream. The fluorescence intensity of the analyte extracted into the organic stream was monitored in situ by a laser induced fluorescence detection system. The performance of the system was demonstrated using an aqueous solution of butyl rhodamine B (BRB) and isobutanol as sample and extractant, respectively. The system proved to be an efficient means for achieving chip based microporous membrane liquid-liquid extraction. The precision of fluorescence measurements was 1.5% R.S.D. (n=4). A linear response range of 1x10(-7) to 1 x 10(-4) M BRB was obtained with a regression equation: I=8.00 x 10(6) C + 4.91. An enrichment factor of ca. 3 was obtained with an extraction efficiency of 69%.